Re: Testing xen-arm on Arndale

[Sengul Thomas <thomas.sengul@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 1661 bytes --]

Thanks Julien, it works now!
Now, I can start /bin/bash as Linux init process :)


Sincerely,
Thomas


On Wed, Mar 27, 2013 at 4:29 AM, Julien Grall <julien.grall@citrix.com>wrote:

> On 03/26/2013 04:04 PM, Anthony PERARD wrote:
>
> > CC'ing xen-devel, where the ARMv7+ port of Xen is happening.
> >
> > On 25/03/13 09:46, Sengul Thomas wrote:
> >> Hello Anthony,
> >> I'm hoping your are the right person to ask about xen-arm on Arndale.
> >>
> >> I've tried the following wiki to run xen-arm on Arndale and it crashes
> while booting dom0.
> >> http://wiki.xen.org/wiki/Xen_ARM_with_Virtualization_Extensions/Arndale
> >>
> >> Here goes some part of log (attached the full log):
> >>
> >> (XEN) Guest data abort: Translation fault at level 2
> >> (XEN)     gva=23c1901c
> >> (XEN)     gpa=0000000023c1901c
> >> (XEN)     size=2 sign=0 write=1 reg=0
> >> (XEN)     eat=0 cm=0 s1ptw=0 dfsc=6
> >> (XEN) dom0 IPA 0x0000000023c1901c
> >> (XEN) P2M @ 02ffbfc0 mfn:0xbfdfe
> >> (XEN) 1ST[0x0] = 0x00000000bfdfd6ff
> >> (XEN) 2ND[0x11e] = 0x0000000000000000
> >> (XEN) ----[ Xen-4.3-unstable  arm32  debug=y  Tainted:    C ]----
> >> (XEN) CPU:    0
> >> (XEN) PC:     4000893c
> >>
> >> Looks like dom0 tried to access at 23c1901c and page fault happens.
> >> I've got no idea how to figure out what is going on.
> >> Could you tell me any helpful tips to move on further?
>
> It's seems the kernel is unable to start when the zImage is loaded at
> 0x40007000. If you change this address, both in U-Boot and the DTS, by
> 0x60000000 the kernel is able to start.
>
> I updated wiki page with the new instructions and the new device tree.
>
> Cheers,
>
> Julien
>
>

[-- Attachment #1.2: Type: text/html, Size: 2438 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel