From: Josh Zhao <joshsystem@gmail.com>
To: Julien Grall <julien.grall@linaro.org>
Cc: Ian Campbell <ian.campbell@citrix.com>,
xen-devel <xen-devel@lists.xen.org>
Subject: Re: Data Abort in Dom0 for cubieboard2
Date: Tue, 10 Sep 2013 09:24:58 +0800 [thread overview]
Message-ID: <CAOYkbahEry32mtWEv03X44DuddXkGSL+zsWN2=jTz2SXwFcSGg@mail.gmail.com> (raw)
In-Reply-To: <522D91A9.4010604@linaro.org>
2013/9/9 Julien Grall <julien.grall@linaro.org>:
> On 09/09/2013 08:36 AM, Josh Zhao wrote:
>>
>> Hi all,
>> Anyone got the similar problem like this:
>>
>>
>>
>> Starting kernel ...
>>
>> - UART enabled -
>> - CPU 00000000 booting -
>> - Machine ID 000010bb -
>> - Started in Hyp mode -
>> - Zero BSS -
>> - Setting up control registers -
>> - Turning on paging -
>> - Ready -
>> -DTB R8 402d7700 -
>> - PADDR R9 40200000 -
>> - phys-offset R10 40000000 -
>> RAM: 0000000040000000 - 00000000bfffffff
>>
>> MODULE[1]: 0000000060000000 - 0000000060400000
>> Placing Xen at 0x00000000bfe00000-0x00000000c0000000
>> Xen heap: 65536 pages Dom heap: 458752 pages
>> Looking for UART console serial0
>> ns16550_uart_dt_init
>> ns16550 at 1c28000-1c28400
>> console done?
>> UART mapped at 10007000
>> divisor 0
>> __ __ _ _ _ _ _ _ _
>> \ \/ /___ _ __ | || | | || | _ _ _ __ ___| |_ __ _| |__ | | ___
>> \ // _ \ '_ \ | || |_| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _
>> \
>> / \ __/ | | | |__ _|__ _|__| |_| | | | \__ \ || (_| | |_) | |
>> __/
>> /_/\_\___|_| |_| |_|(_) |_| \__,_|_|
>> |_|___/\__\__,_|_.__/|_|\___|
>>
>> (XEN) Xen version 4.4-unstable (joshzhao@)
>> (arm-unknown-linux-gnueabi-gcc (GCC) 4.6.3) debug=y Mon Sep 9
>> 15:30:08 CST 2013
>> (XEN) Latest ChangeSet: Mon Aug 26 12:40:44 2013 +0200 git:8a7769b-dirty
>> (XEN) Console output is synchronous.
>> (XEN) Processor: "ARM Limited", variant: 0x0, part 0xc07, rev 0x4
>> (XEN) 32-bit Execution:
>> (XEN) Processor Features: 00001131:00011011
>> (XEN) Instruction Sets: AArch32 Thumb Thumb-2 ThumbEE Jazelle
>> (XEN) Extensions: GenericTimer Security
>> (XEN) Debug Features: 02010555
>> (XEN) Auxiliary Features: 00000000
>> (XEN) Memory Model Features: 10101105 40000000 01240000 02102211
>> (XEN) ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000
>> (XEN) Platform: ALLWINNER SUN7I-A20
>> (XEN) Generic Timer IRQ: phys=55 hyp=57 virt=56
>> (XEN) clock-frequency res:0
>> (XEN) Using generic timer at 24000 KHz boot_count:0000000021817d4d
>> (XEN) GIC initialization:
>> (XEN) gic_dist_addr=0000000001c81000
>> (XEN) gic_cpu_addr=0000000001c82000
>> (XEN) gic_hyp_addr=0000000001c84000
>> (XEN) gic_vcpu_addr=0000000001c86000
>> (XEN) gic_maintenance_irq=25
>> (XEN) GIC: 160 lines, 1 cpu, secure (IID 0100143b).
>> (XEN) Waiting for 0 other CPUs to be ready
>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>> (XEN) Allocated console ring of 16 KiB.
>> (XEN) VFP implementer 0x41 architecture 2 part 0x30 variant 0x7 rev 0x4
>> (XEN) Brought up 1 CPUs
>> (XEN) *** LOADING DOMAIN 0 ***
>> (XEN) Populate P2M 0x90000000->0xa0000000 (1:1 mapping for dom0)
>> (XEN) Device-tree contains "xen,xen" node. Ignoring.
>> (XEN) Loading kernel from boot module 1
>> (XEN) Loading zImage from 0000000060000000 to
>> 0000000090008000-0000000090375d08
>> (XEN) Loading dom0 DTB to 0x000000009fe00000-0x000000009fe0106f
>> (XEN) CPU0: Unexpected Trap: Data Abort
>> (XEN) ----[ Xen-4.4-unstable arm32 debug=y Tainted: C ]----
>> (XEN) CPU: 0
>> (XEN) PC: 00214270 free_heap_pages+0x228/0x40c
>> (XEN) CPSR: 8000005a MODE:Hypervisor
>> (XEN) R0: 00100100 R1: 00200200 R2: 00000000 R3: 01800000
>> (XEN) R4: 00000012 R5: 02000000 R6: 00000012 R7: 00000001
>> (XEN) R8: 002d200c R9: 02600000 R10:000c0000 R11:0028fa2c
>> R12:00261dcc
>> (XEN) HYP: SP: 0028fa04 LR: 00000000
>> (XEN)
>> (XEN) VTCR_EL2: 80002558
>> (XEN) VTTBR_EL2: 00010000bfdfc000
>> (XEN)
>> (XEN) SCTLR_EL2: 30cd187f
>> (XEN) HCR_EL2: 0000000000282835
>> (XEN) TTBR0_EL2: 00000000bfed1000
>> (XEN)
>> (XEN) ESR_EL2: 94000006
>> (XEN) HPFAR_EL2: 00000000920e0a40
>> (XEN) HDFAR: 01800008
>> (XEN) HIFAR: 8285a320
>> (XEN)
>> (XEN) Xen stack trace from sp=0028fa04:
>> (XEN) 002140d8 0029a3a0 000003ff 02407fe0 00299118 00000400 0029a3a0
>> 00000000
>> (XEN) 4ffff117 0028fa54 00214f0c 00000000 00000fff 00000000 00270010
>> 00000000
>> (XEN) 60000000 00000000 4ffff117 0028fa64 002151e0 002704b0 00000001
>> 0028fa84
>> (XEN) 0026b8bc 00000040 9fe00000 00000000 9fe00000 00000f68 00000000
>> 0028fedc
>> (XEN) 00243470 9fe0106f 00000000 00020000 00000000 4ffeff58 40012000
>> 90000000
>> (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> 00000008
>> (XEN) 00000001 00000001 00000000 0025dde0 00000000 00000000 4fff4000
>> 00000008
>> (XEN) 00000008 00256ef4 00000002 00000000 00000f10 00000001 00000001
>> 00000001
>> (XEN) 00000001 00000000 00000000 00000000 00000000 00000000 00000000
>> 00000000
>> (XEN) 00000000 00000000 00000000 00000000 00000000 00000001 00000001
>> 00000001
>> (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> 00000000
>> (XEN) 00000000 00000000 00000000 00000000 00000000 2c6e6578 2d6e6578
>> 00342e34
>> (XEN) 2c6e6578 006e6578 000000b0 00000200 00000000 00000000 01000000
>> 0f000000
>> (XEN) 080f0000 00000000 00000000 00000000 00000000 00000000 4fffe280
>> 40013e80
>> (XEN) 0028fb94 40010000 00000000 10000000 00000000 00000001 00000000
>> 90000000
>> (XEN) 00000000 10000000 00000000 00000000 00000000 00000000 00000000
>> 00000000
>> (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> 00000000
>> (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> 00000000
>> (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> 9fe00000
>> (XEN) 00000000 90008000 00000000 00000000 00000000 60000000 00000000
>> 90008000
>> (XEN) Xen call trace:
>> (XEN) [<00214270>] free_heap_pages+0x228/0x40c (PC)
>> (XEN) [<00000000>] ??? (LR)
>> (XEN) [<00214f0c>] init_heap_pages+0x108/0x120
>> (XEN) [<002151e0>] init_domheap_pages+0x98/0xa8
>> (XEN) [<0026b8bc>] discard_initial_modules+0x6c/0x98
>> (XEN) [<00243470>] construct_dom0+0xc7c/0xe2c
>> (XEN) [<0026c3b8>] start_xen+0xa94/0xb60
>> (XEN) [<002005a0>] launch+0x98/0xc8
>> (XEN)
>
>
> I had a similar issue with the Arndale board. Do you have the commit ceb93c7
> "xen/arm: add lower-bound check in mfn_valid" in your tree? It should
> resolve your problem.
>
Thanks Julien. The issue is fixed after applying the patch. I am
wondering why the mfn will be lower than frametable_base_mfn?
> Cheers,
>
> --
> Julien Grall
next prev parent reply other threads:[~2013-09-10 1:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-09 7:36 Data Abort in Dom0 for cubieboard2 Josh Zhao
2013-09-09 8:26 ` Ian Campbell
2013-09-09 8:39 ` Josh Zhao
2013-09-09 8:42 ` Josh Zhao
2013-09-09 9:15 ` Julien Grall
2013-09-10 1:24 ` Josh Zhao [this message]
2013-09-10 8:30 ` Ian Campbell
2013-09-10 8:41 ` Josh Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAOYkbahEry32mtWEv03X44DuddXkGSL+zsWN2=jTz2SXwFcSGg@mail.gmail.com' \
--to=joshsystem@gmail.com \
--cc=ian.campbell@citrix.com \
--cc=julien.grall@linaro.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).