From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keir Fraser Subject: Re: [PATCH] x86: suppress warning messages on IO-APIC-less systems Date: Tue, 17 Apr 2012 14:09:16 +0100 Message-ID: References: <4F8D851B020000780007E7E6@nat28.tlf.novell.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <4F8D851B020000780007E7E6@nat28.tlf.novell.com> List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xen.org Errors-To: xen-devel-bounces@lists.xen.org To: Jan Beulich , xen-devel List-Id: xen-devel@lists.xenproject.org On 17/04/2012 13:58, "Jan Beulich" wrote: > Each call to mp_register_gsi() so far produced two warnings (about not > being able to find the corresponding IO-APIC pin). > > However, we should use the provided information for setting the ELCR > correctly (we might want to even do this when there is an IO-APIC, if > was absolutely certain that all machines really have this register > [and specifically not some other device at the two I/O ports in > question]). It is in any case questionable that we allow Dom0 to set > this register - it could particularly be the interrupt of a plug-in > serial port card that might not work due to this. The problem is that > all Dom0 kernels to date do so, hence we can't simply #GP on such an > access (which would be the result if we disallowed access to the port > as we should have done from the beginning). > > Signed-off-by: Jan Beulich Acked-by: Keir Fraser > --- a/xen/arch/x86/mpparse.c > +++ b/xen/arch/x86/mpparse.c > @@ -1034,6 +1034,21 @@ int mp_register_gsi (u32 gsi, int trigge > return gsi; > #endif > > + if (!nr_ioapics) { > + unsigned int port = 0x4d0 + (gsi >> 3); > + u8 val; > + > + if (!platform_legacy_irq(gsi)) > + return -EINVAL; > + val = inb(port); > + if (triggering) > + val |= 1 << (gsi & 7); > + else > + val &= ~(1 << (gsi & 7)); > + outb(val, port); > + return 0; > + } > + > ioapic = mp_find_ioapic(gsi); > if (ioapic < 0) { > printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel