From: Olaf Hering <olaf@aepfle.de>
To: xen-devel@lists.xensource.com
Subject: [PATCH] tools/libxc: send page-in requests in batches in linux_privcmd_map_foreign_bulk
Date: Mon, 26 Mar 2012 15:22:36 +0200 [thread overview]
Message-ID: <b66a4a57cee2de421fb5.1332768156@probook.site> (raw)
# HG changeset patch
# User Olaf Hering <olaf@aepfle.de>
# Date 1332768138 -7200
# Node ID b66a4a57cee2de421fb5938db04797b5de10162d
# Parent 4bd752a4cdf323c41c50f8cd6286f566d67adeae
tools/libxc: send page-in requests in batches in linux_privcmd_map_foreign_bulk
One of the bottlenecks with foreign page-in request is the poor retry
handling in linux_privcmd_map_foreign_bulk(). It sends one request per
paged gfn at a time and it waits until the gfn is accessible. This
causes long delays in mmap requests from qemu-dm and xc_save.
Instead of sending one request at a time, walk the entire gfn list and
send batches of mmap requests. They will eventually end up in the pagers
request ring (if it has room again), and will fill up this ring so that
in turn the pager can also process page-in in batches.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
diff -r 4bd752a4cdf3 -r b66a4a57cee2 tools/libxc/xc_linux_osdep.c
--- a/tools/libxc/xc_linux_osdep.c
+++ b/tools/libxc/xc_linux_osdep.c
@@ -191,6 +191,59 @@ static void *linux_privcmd_map_foreign_b
return addr;
}
+/*
+ * Retry mmap of all paged gfns in batches
+ * retuns < 0 on fatal error
+ * returns 0 if all gfns left paging state
+ * returns > 0 if some gfns are still in paging state
+ *
+ * Walk all gfns and try to assemble blocks of gfns in paging state.
+ * This will keep the request ring full and avoids delays.
+ */
+static int retry_paged(int fd, uint32_t dom, void *addr,
+ const xen_pfn_t *arr, int *err, unsigned int num)
+{
+ privcmd_mmapbatch_v2_t ioctlx;
+ int rc, paged = 0, i = 0;
+
+ do
+ {
+ /* Skip gfns not in paging state */
+ if ( err[i] != -ENOENT )
+ {
+ i++;
+ continue;
+ }
+
+ paged++;
+
+ /* At least one gfn is still in paging state */
+ ioctlx.num = 1;
+ ioctlx.dom = dom;
+ ioctlx.addr = (unsigned long)addr + ((unsigned long)i<<XC_PAGE_SHIFT);
+ ioctlx.arr = arr + i;
+ ioctlx.err = err + i;
+
+ /* Assemble a batch of requests */
+ while ( ++i < num )
+ {
+ if ( err[i] != -ENOENT )
+ break;
+ ioctlx.num++;
+ }
+
+ /* Send request and abort on fatal error */
+ rc = ioctl(fd, IOCTL_PRIVCMD_MMAPBATCH_V2, &ioctlx);
+ if ( rc < 0 && errno != ENOENT )
+ goto out;
+
+ } while ( i < num );
+
+ rc = paged;
+out:
+ return rc;
+}
+
static void *linux_privcmd_map_foreign_bulk(xc_interface *xch, xc_osdep_handle h,
uint32_t dom, int prot,
const xen_pfn_t *arr, int *err, unsigned int num)
@@ -220,21 +273,10 @@ static void *linux_privcmd_map_foreign_b
/* Command was recognized, some gfn in arr are in paging state */
if ( rc < 0 && errno == ENOENT )
{
- for ( i = rc = 0; rc == 0 && i < num; i++ )
- {
- if ( err[i] != -ENOENT )
- continue;
-
- ioctlx.num = 1;
- ioctlx.dom = dom;
- ioctlx.addr = (unsigned long)addr + ((unsigned long)i<<XC_PAGE_SHIFT);
- ioctlx.arr = arr + i;
- ioctlx.err = err + i;
- do {
- usleep(100);
- rc = ioctl(fd, IOCTL_PRIVCMD_MMAPBATCH_V2, &ioctlx);
- } while ( rc < 0 && errno == ENOENT && err[i] == -ENOENT );
- }
+ do {
+ usleep(100);
+ rc = retry_paged(fd, dom, addr, arr, err, num);
+ } while ( rc > 0 );
}
/* Command was not recognized, use fall back */
else if ( rc < 0 && errno == EINVAL && (int)num > 0 )
next reply other threads:[~2012-03-26 13:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-26 13:22 Olaf Hering [this message]
2012-04-02 16:41 ` [PATCH] tools/libxc: send page-in requests in batches in linux_privcmd_map_foreign_bulk Ian Jackson
[not found] <mailman.1648.1327589466.1471.xen-devel@lists.xensource.com>
2012-01-26 16:30 ` Andres Lagar-Cavilla
2012-01-26 16:38 ` Olaf Hering
2012-01-26 16:58 ` Andres Lagar-Cavilla
2012-01-26 17:02 ` Olaf Hering
2012-01-27 12:35 ` Olaf Hering
-- strict thread matches above, loose matches on Subject: below --
2012-01-26 14:51 Olaf Hering
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b66a4a57cee2de421fb5.1332768156@probook.site \
--to=olaf@aepfle.de \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).