From: Zhang Yi <yi.z.zhang@linux.intel.com>
To: xen-devel@lists.xenproject.org
Cc: kevin.tian@intel.com, tamas@tklengyel.com, wei.liu2@citrix.com,
jun.nakajima@intel.com, rcojocaru@bitdefender.com,
george.dunlap@eu.citrix.com, andrew.cooper3@citrix.com,
ian.jackson@eu.citrix.com,
Zhang Yi Z <yi.z.zhang@linux.intel.com>,
jbeulich@suse.com
Subject: [PATCH RFC 10/14] xen: vmx: Implement the Hypercall p2m_set_subpage
Date: Thu, 19 Oct 2017 16:13:46 +0800 [thread overview]
Message-ID: <eff072e8be26dbc148b032f17fd9333b90abddb4.1508397860.git.yi.z.zhang@linux.intel.com> (raw)
In-Reply-To: <cover.1508397860.git.yi.z.zhang@linux.intel.com>
From: Zhang Yi Z <yi.z.zhang@linux.intel.com>
To utilize SPP feature, system admin should Set a Sub-page access write via
SPP Hypercall `HVMOP_set_subpage`, which will prepared the flowing things.
(1.Got the corresponding EPT leaf entry via the guest physical address.
(2.If it is a 4K page frame, flag the bit 61 to enable subpage protection on this page.
(3.Setup spp page structure.
Signed-off-by: Zhang Yi Z <yi.z.zhang@linux.intel.com>
---
xen/arch/x86/hvm/hvm.c | 8 ++++++++
xen/arch/x86/mm/mem_access.c | 15 +++++++++++++++
xen/include/xen/mem_access.h | 2 ++
3 files changed, 25 insertions(+)
diff --git a/xen/arch/x86/hvm/hvm.c b/xen/arch/x86/hvm/hvm.c
index 54cd916..afc4620 100644
--- a/xen/arch/x86/hvm/hvm.c
+++ b/xen/arch/x86/hvm/hvm.c
@@ -4696,9 +4696,17 @@ long do_hvm_op(unsigned long op, XEN_GUEST_HANDLE_PARAM(void) arg)
case HVMOP_set_subpage: {
xen_hvm_subpage_t subpage;
+ struct domain *d;
if ( copy_from_guest(&subpage, arg, 1 ) )
return -EFAULT;
+
+ d = rcu_lock_domain_by_any_id(subpage.domid);
+ if ( d == NULL )
+ return -ESRCH;
+
+ rc = p2m_set_subpage(d, (_gfn)(subpage.gfn), subpage.access_map);
+ rcu_unlock_domain(d);
break;
}
diff --git a/xen/arch/x86/mm/mem_access.c b/xen/arch/x86/mm/mem_access.c
index 1b97469..fdedc4a 100644
--- a/xen/arch/x86/mm/mem_access.c
+++ b/xen/arch/x86/mm/mem_access.c
@@ -525,6 +525,21 @@ int p2m_set_spp_page_st(struct domain *d, gfn_t gfn, uint32_t access_map)
return ret;
}
+int p2m_set_subpage(struct domain *d, gfn_t gfn, uint32_t access_map)
+{
+ int ret;
+ ret = p2m_set_mem_spp_wp(d, gfn);
+ if ( ret < 0 )
+ {
+ printk("SPP: Set subpage ept wp failed!! %x\n", ret);
+ return ret;
+ }
+ ret = p2m_set_spp_page_st(d, gfn, access_map);
+ if ( ret < 0 )
+ printk("SPP: Set subpage table failed!! %x\n", ret);
+ return ret;
+}
+
/*
* Local variables:
* mode: C
diff --git a/xen/include/xen/mem_access.h b/xen/include/xen/mem_access.h
index 5ab34c1..28eb70c 100644
--- a/xen/include/xen/mem_access.h
+++ b/xen/include/xen/mem_access.h
@@ -78,6 +78,8 @@ long p2m_set_mem_access_multi(struct domain *d,
*/
int p2m_get_mem_access(struct domain *d, gfn_t gfn, xenmem_access_t *access);
+int p2m_set_subpage(struct domain *d, gfn_t gfn, uint32_t access_map);
+
#ifdef CONFIG_HAS_MEM_ACCESS
int mem_access_memop(unsigned long cmd,
XEN_GUEST_HANDLE_PARAM(xen_mem_access_op_t) arg);
--
2.7.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-10-19 8:13 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 8:04 [PATCH RFC 00/14] Intel EPT-Based Sub-page Write Protection Support Zhang Yi
2017-10-19 8:08 ` [PATCH RFC 01/14] xen: vmx: Added EPT based Subpage Write Protection Doc Zhang Yi
2017-10-19 8:08 ` [PATCH RFC 02/14] xen: vmx: Added VMX SPP feature flags and VM-Execution Controls Zhang Yi
2017-10-19 8:09 ` [PATCH RFC 03/14] xen: vmx: Introduce the SPPTP and SPP page table Zhang Yi
2017-10-19 8:10 ` [PATCH RFC 04/14] xen: vmx: Introduce SPP-Induced vm exit and it's handle Zhang Yi
2017-10-19 8:11 ` [PATCH RFC 05/14] xen: vmx: Disable the 2M/1G superpage when SPP enabled Zhang Yi
2017-10-19 18:17 ` Tamas K Lengyel
2017-10-20 8:44 ` Yi Zhang
2017-10-24 17:43 ` Tamas K Lengyel
2017-10-25 15:32 ` Yi Zhang
2017-10-25 15:12 ` Tamas K Lengyel
2017-10-19 8:11 ` [PATCH RFC 06/14] xen: vmx: Added SPP flags in EPT leaf entry Zhang Yi
2017-10-19 8:12 ` [PATCH RFC 07/14] xen: vmx: Update the EPT leaf entry indicated with the SPP enable bit Zhang Yi
2017-10-19 8:12 ` [PATCH RFC 08/14] xen: vmx: Added setup spp page structure Zhang Yi
2017-10-19 18:26 ` Tamas K Lengyel
2017-10-20 8:43 ` Yi Zhang
2017-10-19 8:13 ` [PATCH RFC 09/14] xen: vmx: Introduce a Hyper call to set subpage Zhang Yi
2017-10-19 18:34 ` Tamas K Lengyel
2017-10-20 8:41 ` Yi Zhang
2017-10-19 8:13 ` Zhang Yi [this message]
2017-10-19 8:14 ` [PATCH RFC 11/14] xen: vmx: Added handle of SPP write protection fault Zhang Yi
2017-10-19 8:15 ` [PATCH RFC 12/14] xen: vmx: Support for clear EPT SPP write Protect bit Zhang Yi
2017-10-19 8:15 ` [PATCH RFC 13/14] xen: tools: Introduce the set-subpage into xenctrl Zhang Yi
2017-10-19 8:37 ` Razvan Cojocaru
2017-10-20 8:40 ` Yi Zhang
2017-10-19 8:16 ` [PATCH RFC 14/14] xen: tools: Added xen-subpage tool Zhang Yi
2017-10-19 8:42 ` Razvan Cojocaru
2017-10-20 8:39 ` Yi Zhang
2017-10-19 9:07 ` [PATCH RFC 00/14] Intel EPT-Based Sub-page Write Protection Support Razvan Cojocaru
2017-10-20 8:37 ` Yi Zhang
2017-10-20 8:39 ` Razvan Cojocaru
2017-10-20 8:39 ` Razvan Cojocaru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=eff072e8be26dbc148b032f17fd9333b90abddb4.1508397860.git.yi.z.zhang@linux.intel.com \
--to=yi.z.zhang@linux.intel.com \
--cc=andrew.cooper3@citrix.com \
--cc=george.dunlap@eu.citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=jun.nakajima@intel.com \
--cc=kevin.tian@intel.com \
--cc=rcojocaru@bitdefender.com \
--cc=tamas@tklengyel.com \
--cc=wei.liu2@citrix.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).