xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To: Stefano Stabellini <sstabellini@kernel.org>, xen-devel@lists.xen.org
Cc: jgross@suse.com, Stefano Stabellini <stefano@aporeto.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 10/13] xen/pvcalls: implement recvmsg
Date: Mon, 14 Aug 2017 22:39:02 -0400	[thread overview]
Message-ID: <f9e15125-bf79-fc8d-2df3-2857aab62f9a@oracle.com> (raw)
In-Reply-To: <1501541855-7354-10-git-send-email-sstabellini@kernel.org>



On 07/31/2017 06:57 PM, Stefano Stabellini wrote:
> Implement recvmsg by copying data from the "in" ring. If not enough data
> is available and the recvmsg call is blocking, then wait on the
> inflight_conn_req waitqueue. Take the active socket in_mutex so that
> only one function can access the ring at any given time.
> 
> If no data is available on the ring, rather than returning immediately
> or sleep-waiting, spin for up to 5000 cycles. This small optimization
> turns out to improve performance and latency significantly.
> 
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
>   drivers/xen/pvcalls-front.c | 102 ++++++++++++++++++++++++++++++++++++++++++++
>   drivers/xen/pvcalls-front.h |   4 ++
>   2 files changed, 106 insertions(+)
> 
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index 369acde..635a83a 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -105,6 +105,20 @@ static int pvcalls_front_write_todo(struct sock_mapping *map)
>   	return size - pvcalls_queued(prod, cons, size);
>   }
>   
> +static bool pvcalls_front_read_todo(struct sock_mapping *map)
> +{
> +	struct pvcalls_data_intf *intf = map->active.ring;
> +	RING_IDX cons, prod;
> +	int32_t error;
> +
> +	cons = intf->in_cons;
> +	prod = intf->in_prod;
> +	error = intf->in_error;
> +	return (error != 0 ||
> +		pvcalls_queued(prod, cons,
> +			       XEN_FLEX_RING_SIZE(intf->ring_order)) != 0);
> +}
> +
>   static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
>   {
>   	struct xenbus_device *dev = dev_id;
> @@ -434,6 +448,94 @@ int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
>   	return tot_sent;
>   }
>   
> +static int __read_ring(struct pvcalls_data_intf *intf,
> +		       struct pvcalls_data *data,
> +		       struct iov_iter *msg_iter,
> +		       size_t len, int flags)
> +{
> +	RING_IDX cons, prod, size, masked_prod, masked_cons;
> +	RING_IDX array_size = XEN_FLEX_RING_SIZE(intf->ring_order);
> +	int32_t error;
> +
> +	cons = intf->in_cons;
> +	prod = intf->in_prod;
> +	error = intf->in_error;
> +	/* get pointers before reading from the ring */
> +	virt_rmb();
> +	if (error < 0)
> +		return error;
> +
> +	size = pvcalls_queued(prod, cons, array_size);
> +	masked_prod = pvcalls_mask(prod, array_size);
> +	masked_cons = pvcalls_mask(cons, array_size);
> +
> +	if (size == 0)
> +		return 0;
> +
> +	if (len > size)
> +		len = size;
> +
> +	if (masked_prod > masked_cons) {
> +		copy_to_iter(data->in + masked_cons, len, msg_iter);
> +	} else {
> +		if (len > (array_size - masked_cons)) {
> +			copy_to_iter(data->in + masked_cons,
> +				     array_size - masked_cons, msg_iter);
> +			copy_to_iter(data->in,
> +				     len - (array_size - masked_cons),
> +				     msg_iter);
> +		} else {
> +			copy_to_iter(data->in + masked_cons, len, msg_iter);
> +		}
> +	}
> +	/* read data from the ring before increasing the index */
> +	virt_mb();
> +	if (!(flags & MSG_PEEK))
> +		intf->in_cons += len;
> +
> +	return len;
> +}
> +
> +int pvcalls_front_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
> +		     int flags)
> +{
> +	struct pvcalls_bedata *bedata;
> +	int ret = -EAGAIN;

Not necessary to initialize.

> +	struct sock_mapping *map;
> +
> +	if (!pvcalls_front_dev)
> +		return -ENOTCONN;
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> +	map = (struct sock_mapping *) READ_ONCE(sock->sk->sk_send_head);
> +	if (!map)
> +		return -ENOTSOCK;
> +
> +	if (flags & (MSG_CMSG_CLOEXEC|MSG_ERRQUEUE|MSG_OOB|MSG_TRUNC))
> +		return -EOPNOTSUPP;
> +
> +	mutex_lock(&map->active.in_mutex);
> +	if (len > XEN_FLEX_RING_SIZE(map->active.ring->ring_order))
> +		len = XEN_FLEX_RING_SIZE(map->active.ring->ring_order);
> +
> +	while (!(flags & MSG_DONTWAIT) && !pvcalls_front_read_todo(map)) {
> +		wait_event_interruptible(map->active.inflight_conn_req,
> +					 pvcalls_front_read_todo(map));
> +	}
> +	ret = __read_ring(map->active.ring, &map->active.data,
> +			  &msg->msg_iter, len, flags);
> +
> +	if (ret > 0)
> +		notify_remote_via_irq(map->active.irq);
> +	if (ret == 0)
> +		ret = -EAGAIN;
> +	if (ret == -ENOTCONN)
> +		ret = 0;
> +
> +	mutex_unlock(&map->active.in_mutex);
> +	return ret;

Are errors converted by the caller? (I am asking because recvmsg can 
only return -1 for errors)

-boris

> +}
> +
>   int pvcalls_front_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
>   {
>   	struct pvcalls_bedata *bedata;
> diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
> index d937c24..de24041 100644
> --- a/drivers/xen/pvcalls-front.h
> +++ b/drivers/xen/pvcalls-front.h
> @@ -16,5 +16,9 @@ int pvcalls_front_accept(struct socket *sock,
>   int pvcalls_front_sendmsg(struct socket *sock,
>   			  struct msghdr *msg,
>   			  size_t len);
> +int pvcalls_front_recvmsg(struct socket *sock,
> +			  struct msghdr *msg,
> +			  size_t len,
> +			  int flags);
>   
>   #endif
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

  reply	other threads:[~2017-08-15  2:39 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <alpine.DEB.2.10.1707311536460.22381@sstabellini-ThinkPad-X260>
2017-07-31 22:57 ` [PATCH v3 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 02/13] xen/pvcalls: implement frontend disconnect Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 03/13] xen/pvcalls: connect to the backend Stefano Stabellini
2017-08-11 22:55     ` Boris Ostrovsky
     [not found]     ` <4fbe7300-8934-ed6b-3868-443ae96c2ecb@oracle.com>
2017-09-09  0:14       ` Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 04/13] xen/pvcalls: implement socket command and handle events Stefano Stabellini
2017-08-13  0:42     ` Boris Ostrovsky
     [not found]     ` <bac44a61-e6d2-72fe-a8b4-5dec0e23186f@oracle.com>
2017-09-08 23:20       ` Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 05/13] xen/pvcalls: implement connect command Stefano Stabellini
2017-08-13  1:12     ` Boris Ostrovsky
     [not found]     ` <98a37ce0-468c-0938-a56d-31bbde177c91@oracle.com>
2017-09-08 21:23       ` Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 06/13] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 07/13] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 08/13] xen/pvcalls: implement accept command Stefano Stabellini
2017-08-15  2:00     ` Boris Ostrovsky
     [not found]     ` <1a368546-fec3-7f10-cc1b-296e095c9ba1@oracle.com>
2017-08-15  2:04       ` Boris Ostrovsky
     [not found]       ` <37d72529-c8d4-96e1-422c-342a19af9055@oracle.com>
2017-09-08 21:58         ` Stefano Stabellini
2017-09-08 22:16       ` Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 09/13] xen/pvcalls: implement sendmsg Stefano Stabellini
2017-08-15  2:31     ` Boris Ostrovsky
2017-09-08 23:48       ` Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 10/13] xen/pvcalls: implement recvmsg Stefano Stabellini
2017-08-15  2:39     ` Boris Ostrovsky [this message]
2017-09-08 23:11       ` Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 11/13] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 12/13] xen/pvcalls: implement release command Stefano Stabellini
2017-07-31 22:57   ` [PATCH v3 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Stefano Stabellini
2017-08-11 22:36   ` [PATCH v3 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Boris Ostrovsky
     [not found]   ` <1501541855-7354-2-git-send-email-sstabellini@kernel.org>
2017-08-11 22:43     ` [PATCH v3 02/13] xen/pvcalls: implement frontend disconnect Boris Ostrovsky
2017-09-09  0:07       ` Stefano Stabellini
     [not found]   ` <1501541855-7354-6-git-send-email-sstabellini@kernel.org>
2017-08-13  1:22     ` [PATCH v3 06/13] xen/pvcalls: implement bind command Boris Ostrovsky
     [not found]     ` <3591ec0c-1556-dd20-1cc9-092eb1792c42@oracle.com>
2017-09-08 21:46       ` Stefano Stabellini
     [not found]   ` <1501541855-7354-7-git-send-email-sstabellini@kernel.org>
2017-08-13  1:28     ` [PATCH v3 07/13] xen/pvcalls: implement listen command Boris Ostrovsky
     [not found]   ` <1501541855-7354-11-git-send-email-sstabellini@kernel.org>
2017-08-15 20:30     ` [PATCH v3 11/13] xen/pvcalls: implement poll command Boris Ostrovsky
     [not found]     ` <702cfa9c-5f14-07a3-63ba-93648ff66d9b@oracle.com>
2017-09-08 23:03       ` Stefano Stabellini
     [not found]       ` <alpine.DEB.2.10.1709081540330.19719@sstabellini-ThinkPad-X260>
2017-09-12 14:14         ` Boris Ostrovsky
     [not found]         ` <6c9613d8-8219-d06f-9095-fa57474ed518@oracle.com>
2017-09-12 22:17           ` Stefano Stabellini
     [not found]           ` <alpine.DEB.2.10.1709121502210.9439@sstabellini-ThinkPad-X260>
2017-09-12 23:04             ` Boris Ostrovsky
     [not found]             ` <73a6ae0f-077c-9d42-fd56-0738ccb30cec@oracle.com>
2017-09-12 23:13               ` Stefano Stabellini
     [not found]               ` <alpine.DEB.2.10.1709121610250.9439@sstabellini-ThinkPad-X260>
2017-09-12 23:18                 ` Stefano Stabellini
     [not found]   ` <1501541855-7354-12-git-send-email-sstabellini@kernel.org>
2017-08-15 20:44     ` [PATCH v3 12/13] xen/pvcalls: implement release command Boris Ostrovsky
     [not found]     ` <2fd1b3f3-28aa-1958-7522-766c7d92e8d3@oracle.com>
2017-09-08 23:09       ` Stefano Stabellini
2017-08-10 15:07 ` [PATCH v3 00/13] introduce the Xen PV Calls frontend Boris Ostrovsky
     [not found] ` <bbff3e92-e71a-f685-bae1-59521e6f2f99@oracle.com>
2017-08-10 18:15   ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f9e15125-bf79-fc8d-2df3-2857aab62f9a@oracle.com \
    --to=boris.ostrovsky@oracle.com \
    --cc=jgross@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sstabellini@kernel.org \
    --cc=stefano@aporeto.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).