* [PATCH v3] migration-guides: Add start of 3.4 guide with override migration notes
[not found] <169696B02F879A93.7588@lists.yoctoproject.org>
@ 2021-07-30 14:09 ` Michael Opdenacker
[not found] ` <169696DEEE299346.20313@lists.yoctoproject.org>
1 sibling, 0 replies; 2+ messages in thread
From: Michael Opdenacker @ 2021-07-30 14:09 UTC (permalink / raw)
To: docs; +Cc: Richard Purdie, Quentin Schulz, Michael Opdenacker
From: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: Quentin Schulz <foss@0leil.net>
Reviewed-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
---
documentation/migration-guides/index.rst | 1 +
.../migration-guides/migration-3.4.rst | 76 +++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 documentation/migration-guides/migration-3.4.rst
diff --git a/documentation/migration-guides/index.rst b/documentation/migration-guides/index.rst
index 6304e6318c..287b553195 100644
--- a/documentation/migration-guides/index.rst
+++ b/documentation/migration-guides/index.rst
@@ -12,6 +12,7 @@ to move to one release of the Yocto Project from the previous one.
.. toctree::
migration-general
+ migration-3.4
migration-3.3
migration-3.2
migration-3.1
diff --git a/documentation/migration-guides/migration-3.4.rst b/documentation/migration-guides/migration-3.4.rst
new file mode 100644
index 0000000000..6fa1ab20cb
--- /dev/null
+++ b/documentation/migration-guides/migration-3.4.rst
@@ -0,0 +1,76 @@
+Release 3.4 (honister)
+======================
+
+This section provides migration information for moving to the Yocto
+Project 3.4 Release (codename "honister") from the prior release.
+
+Override syntax changes
+-----------------------
+
+This release requires changes to the metadata to indicate where overrides are
+being used in variable key names. This is done with the ``:`` character replacing
+the use of ``_`` previously. This means that an entry like::
+
+ SRC_URI_qemux86 = "file://somefile"
+
+becomes::
+
+ SRC_URI:qemux86 = "file://somefile"
+
+since ``qemux86`` is an override. This applies to any use of override syntax so::
+
+ SRC_URI_append = " file://somefile"
+ SRC_URI_append_qemux86 = " file://somefile2"
+ SRC_URI_remove_qemux86-64 = " file://somefile3"
+ SRC_URI_prepend_qemuarm = "file://somefile4 "
+ FILES_${PN}-ptest = "${bindir}/xyz"
+ IMAGE_CMD_tar = "tar"
+ BASE_LIB_tune-cortexa76 = "lib"
+ SRCREV_pn-bash = "abc"
+ BB_TASK_NICE_LEVEL_task-testimage = '0'
+
+becomes::
+
+ SRC_URI:append = " file://somefile"
+ SRC_URI:append:qemux86 = " file://somefile2"
+ SRC_URI:remove:qemux86-64 = " file://somefile3"
+ SRC_URI:prepend:qemuarm = "file://somefile4 "
+ FILES:${PN}-ptest = "${bindir}/xyz"
+ IMAGE_CMD:tar = "tar"
+ BASE_LIB:tune-cortexa76 = "lib"
+ SRCREV:pn-bash = "abc"
+ BB_TASK_NICE_LEVEL:task-testimage = '0'
+
+This also applies to
+:ref:`variable queries to the datastore <bitbake:bitbake-user-manual/bitbake-user-manual-metadata:functions for accessing datastore variables>`,
+for example using ``getVar`` and similar so ``d.getVar("RDEPENDS_${PN}")``
+becomes ``d.getVar("RDEPENDS:${PN}")``.
+
+Whilst some of these are fairly obvious such as :term:`MACHINE` and :term:`DISTRO`
+overrides, some are less obvious, for example the packaging variables such as
+:term:`RDEPENDS`, :term:`FILES` and so on taking package names (e.g. ``${PN}``,
+``${PN}-ptest``) as overrides. These overrides are not always in
+:term:`OVERRIDES` but applied conditionally in specific contexts
+such as packaging. ``task-<taskname>`` is another context specific override, the
+context being specific tasks in that case. Tune overrides are another special
+case where some code does use them as overrides but some does not. We plan to try
+and make the tune code use overrides more consistently in the future.
+
+To help with migration of layers there is a script in OE-Core. Once configured
+with the overrides used by a layer, this can be run as::
+
+ <oe-core>/scripts/contrib/convert-overrides.py <layerdir>
+
+.. note::
+
+ Please read the notes in the script as it isn't entirely automatic and it isn't
+ expected to handle every case. In particular, it needs to be told which overrides
+ the layer uses (usually machine and distro names/overrides) and the result should
+ be carefully checked since it can be a little enthusiastic and will convert
+ references to ``_append``, ``_remove`` and ``_prepend`` in function and variables names.
+
+For reference, this conversion is important as it allows BitBake to know what is
+an override and what is not. This should allow us to proceed with other syntax
+improvements and simplifications for usability. It also means bitbake no longer
+has to guess and maintain large lookup lists just in case ``functionname`` in
+``my_functionname`` is an override and this should improve efficiency.
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread