[PATCH v2 3/3] dev-manual/bmaptool.rst: simplify and fix instructions

[michael.opdenacker@rootcommit.com]

From: Michael Opdenacker <michael.opdenacker@rootcommit.com>

- Remove duplicate instructions

- Detail how to run bmaptool directly if you installed it on your host
  instead of building it through the ``bmaptool-native`` recipe,
  as running "oe-run-native bmaptool-native bmaptool ..." won't work
  in this case.

Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
---
 documentation/dev-manual/bmaptool.rst | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/documentation/dev-manual/bmaptool.rst b/documentation/dev-manual/bmaptool.rst
index 37083c9c64..93c8d3a45e 100644
--- a/documentation/dev-manual/bmaptool.rst
+++ b/documentation/dev-manual/bmaptool.rst
@@ -43,14 +43,16 @@ any type of image. Use these steps to flash an image using `bmaptool`:
    depending on your particular setup. The following commands assume the
    image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
 
-   -  If you have write access to the media, use this command form::
+   -  If needed, set permissions to get write access to the media::
 
-         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ sudo chmod 666 /dev/sdX
 
-   -  If you do not have write access to the media, set your permissions
-      first and then use the same command form::
+   -  If you installed the package for `bmaptool`, you can directly run::
+
+         $ sudo bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+
+   -  Otherwise, if you built `bmaptool` with BitBake, run::
 
-         $ sudo chmod 666 /dev/sdX
          $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
 For help on the ``bmaptool`` command, use the following command::