Re: [docs] [PATCH 3/3] dev-manual/bmaptool.rst: simplify and fix instructions

["Ulrich Ölmann" <u.oelmann@pengutronix.de>]

Hey Michael,

On Sun, Dec 01 2024 at 17:38 +0000, "Michael Opdenacker via lists.yoctoproject.org" <michael.opdenacker=rootcommit.com@lists.yoctoproject.org> wrote:
> From: Michael Opdenacker <michael.opdenacker@rootcommit.com>
>
> - Remove duplicate instructions
>
> - Detail how to run bmaptool directly if you installed it on your host
>   instead of building it through the ``bmaptool-native`` recipe,
>   as running "oe-run-native bmaptool-native bmaptool ..." won't work
>   in this case.
>
> Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
> ---
>  documentation/dev-manual/bmaptool.rst | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/documentation/dev-manual/bmaptool.rst b/documentation/dev-manual/bmaptool.rst
> index 5fc46c7792..e17074b65b 100644
> --- a/documentation/dev-manual/bmaptool.rst
> +++ b/documentation/dev-manual/bmaptool.rst
> @@ -44,14 +44,16 @@ any type of image. Use these steps to flash an image using `bmaptool`:
>     depending on your particular setup. The following commands assume the
>     image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
>
> -   -  If you have write access to the media, use this command form::
> +   -  If needed, set permissions to get write access to the media::
>
> -         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
> +         $ such chmod 666 /dev/sdX

a small typo slipped in here: s/such/sudo/

Best regards
Ulrich


> +
> +   -  If you installed the package for `bmaptool`, you can directly run::
> +
> +         $ sudo bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
>
> -   -  If you do not have write access to the media, set your permissions
> -      first and then use the same command form::
> +   -  Otherwise, if you built `bmaptool` with BitBake, run::
>
> -         $ sudo chmod 666 /dev/sdX
>           $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
>
>  For help on the ``bmaptool`` command, use the following command::
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#5860): https://lists.yoctoproject.org/g/docs/message/5860
> Mute This Topic: https://lists.yoctoproject.org/mt/109865516/3618626
> Group Owner: docs+owner@lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/docs/unsub [u.oelmann@pengutronix.de]
> -=-=-=-=-=-=-=-=-=-=-=-
-- 
Pengutronix e.K.                           | Ulrich Ölmann               |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |