Re: [docs] [PATCH v2 3/3] dev-manual/bmaptool.rst: simplify and fix instructions

[Michael Opdenacker <michael.opdenacker@rootcommit.com>]

Hi Antonin

On 12/4/24 13:19, Antonin Godard wrote:
> On Wed Dec 4, 2024 at 11:44 AM CET, Michael Opdenacker via lists.yoctoproject.org wrote:
>> From: Michael Opdenacker <michael.opdenacker@rootcommit.com>
>>
>> - Remove duplicate instructions
>>
>> - Detail how to run bmaptool directly if you installed it on your host
>>    instead of building it through the ``bmaptool-native`` recipe,
>>    as running "oe-run-native bmaptool-native bmaptool ..." won't work
>>    in this case.
>>
>> Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
>> ---
>>   documentation/dev-manual/bmaptool.rst | 12 +++++++-----
>>   1 file changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/documentation/dev-manual/bmaptool.rst b/documentation/dev-manual/bmaptool.rst
>> index 37083c9c64..93c8d3a45e 100644
>> --- a/documentation/dev-manual/bmaptool.rst
>> +++ b/documentation/dev-manual/bmaptool.rst
>> @@ -43,14 +43,16 @@ any type of image. Use these steps to flash an image using `bmaptool`:
>>      depending on your particular setup. The following commands assume the
>>      image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
>>   
>> -   -  If you have write access to the media, use this command form::
>> +   -  If needed, set permissions to get write access to the media::
>>   
>> -         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
>> +         $ sudo chmod 666 /dev/sdX
> I think you forgot to change to "a+w"
> Also, it wasn't moved after the sudo command?
>
> Looks like the wrong patch may have slipped in? :)


Right, I messed things up by modifying the second commit.
A V3 is coming, thanks!
Michael.

-- 
Michael Opdenacker
Root Commit
Embedded Linux Training and Consulting
https://rootcommit.com/