Re: [PATCH v3] test-manual: add initial reproducible builds documentation

["Michael Opdenacker" <michael.opdenacker@bootlin.com>]

Hello,

Commenting my own patch, before others do :-}

On 6/9/21 4:47 PM, Michael Opdenacker wrote:
> +The project's current reproducibility status can be seen at
> +https://www.yoctoproject.org/reproducible-build-results/

Oops, my bad, I could have used the :yocto_home: macro here. Will do.

> +
> +You can also check the reproducibility status on supported host distributions:
> +
> +-  CentOS: https://autobuilder.yoctoproject.org/typhoon/#/builders/reproducible-centos
> +-  Debian: https://autobuilder.yoctoproject.org/typhoon/#/builders/reproducible-debian
> +-  Fedora: https://autobuilder.yoctoproject.org/typhoon/#/builders/reproducible-fedora
> +-  Ubuntu: https://autobuilder.yoctoproject.org/typhoon/#/builders/reproducible-ubuntu


Same here, will use :yocto_ab:

> +
> +===============================
> +Can I test my layer or recipes?
> +===============================
> +
> +Once again, you can run a ``world`` test using the
> +:ref:`oe-selftest <ref-manual/release-process:Testing and Quality Assurance>`
> +command provided above. This functionality is implemented
> +in `meta/lib/oeqa/selftest/cases/reproducible.py
> +<https://git.openembedded.org/openembedded-core/tree/meta/lib/oeqa/selftest/cases/reproducible.py>`_.


Same here, will use :yocto_git:

Pfooh, that was just in time before Quentin and Nico catch those ;-)

Michael.

-- 
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com