Re: [docs] [PATCH 3/3] dev-manual/bmaptool.rst: simplify and fix instructions

[Michael Opdenacker <michael.opdenacker@rootcommit.com>]

Hey Ulrich

On 12/1/24 20:26, Ulrich Ölmann wrote:
> Hey Michael,
>
> On Sun, Dec 01 2024 at 17:38 +0000, "Michael Opdenacker via lists.yoctoproject.org" <michael.opdenacker=rootcommit.com@lists.yoctoproject.org> wrote:
>> From: Michael Opdenacker <michael.opdenacker@rootcommit.com>
>>
>> - Remove duplicate instructions
>>
>> - Detail how to run bmaptool directly if you installed it on your host
>>    instead of building it through the ``bmaptool-native`` recipe,
>>    as running "oe-run-native bmaptool-native bmaptool ..." won't work
>>    in this case.
>>
>> Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com>
>> ---
>>   documentation/dev-manual/bmaptool.rst | 12 +++++++-----
>>   1 file changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/documentation/dev-manual/bmaptool.rst b/documentation/dev-manual/bmaptool.rst
>> index 5fc46c7792..e17074b65b 100644
>> --- a/documentation/dev-manual/bmaptool.rst
>> +++ b/documentation/dev-manual/bmaptool.rst
>> @@ -44,14 +44,16 @@ any type of image. Use these steps to flash an image using `bmaptool`:
>>      depending on your particular setup. The following commands assume the
>>      image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
>>
>> -   -  If you have write access to the media, use this command form::
>> +   -  If needed, set permissions to get write access to the media::
>>
>> -         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
>> +         $ such chmod 666 /dev/sdX
> a small typo slipped in here: s/such/sudo/


Oops, fixed!
Thanks for the review.
Cheers
Michael.

-- 
Michael Opdenacker
Root Commit
Embedded Linux Training and Consulting
https://rootcommit.com/