From: "Trevor Woerner" <twoerner@gmail.com>
To: yocto@lists.yoctoproject.org
Subject: [meta-rockchip][PATCH 1/4] centralize console settings
Date: Wed, 23 Jun 2021 11:24:54 -0400 [thread overview]
Message-ID: <20210623152457.35324-1-twoerner@gmail.com> (raw)
The console settings (baud and device) are scrambled and spread throughout the
MACHINE configurations. Consolidate them and set defaults which are then
overridden only as required.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
---
conf/machine/include/nanopi-m4.inc | 2 --
conf/machine/include/rk3066.inc | 1 +
conf/machine/include/rk3188.inc | 3 +++
conf/machine/include/rk3288.inc | 2 +-
conf/machine/include/rk3328.inc | 2 --
conf/machine/include/rk3399.inc | 2 --
conf/machine/include/rock-pi-4.inc | 2 --
conf/machine/include/rockchip-defaults.inc | 3 +++
conf/machine/marsboard-rk3066.conf | 1 -
conf/machine/radxarock.conf | 1 -
10 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/conf/machine/include/nanopi-m4.inc b/conf/machine/include/nanopi-m4.inc
index a14b705..8a7c1d9 100644
--- a/conf/machine/include/nanopi-m4.inc
+++ b/conf/machine/include/nanopi-m4.inc
@@ -21,5 +21,3 @@ WKS_FILE_DEPENDS ?= " \
IMAGE_BOOT_FILES ?= "\
${KERNEL_IMAGETYPE} \
"
-
-SERIAL_CONSOLES = "1500000;ttyS2"
diff --git a/conf/machine/include/rk3066.inc b/conf/machine/include/rk3066.inc
index dffbee0..76744ee 100644
--- a/conf/machine/include/rk3066.inc
+++ b/conf/machine/include/rk3066.inc
@@ -7,5 +7,6 @@ require conf/machine/include/tune-cortexa9.inc
require conf/machine/include/soc-family.inc
require conf/machine/include/rockchip-defaults.inc
+RK_CONSOLE_BAUD = "115200"
KBUILD_DEFCONFIG = "multi_v7_defconfig"
KERNEL_IMAGETYPE = "zImage"
diff --git a/conf/machine/include/rk3188.inc b/conf/machine/include/rk3188.inc
index 59e65d1..e21bbf7 100644
--- a/conf/machine/include/rk3188.inc
+++ b/conf/machine/include/rk3188.inc
@@ -9,3 +9,6 @@ require conf/machine/include/rockchip-defaults.inc
KBUILD_DEFCONFIG = "multi_v7_defconfig"
KERNEL_IMAGETYPE = "zImage"
+
+RK_CONSOLE_BAUD = "115200"
+RK_CONSOLE_DEVICE = "ttyFIQ0"
diff --git a/conf/machine/include/rk3288.inc b/conf/machine/include/rk3288.inc
index 480e250..2715e73 100644
--- a/conf/machine/include/rk3288.inc
+++ b/conf/machine/include/rk3288.inc
@@ -10,7 +10,7 @@ require conf/machine/include/rockchip-defaults.inc
KBUILD_DEFCONFIG ?= "multi_v7_defconfig"
KERNEL_IMAGETYPE = "zImage"
-SERIAL_CONSOLES = "115200;ttyS2"
+RK_CONSOLE_BAUD = "115200"
PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
SPL_BINARY ?= "idbloader.img"
diff --git a/conf/machine/include/rk3328.inc b/conf/machine/include/rk3328.inc
index a4bbc5d..5b11868 100644
--- a/conf/machine/include/rk3328.inc
+++ b/conf/machine/include/rk3328.inc
@@ -19,7 +19,5 @@ TFA_BUILD_TARGET = "bl31"
UBOOT_SUFFIX ?= "itb"
UBOOT_ENTRYPOINT ?= "0x06000000"
-SERIAL_CONSOLES = "1500000;ttyS2"
-
PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
SPL_BINARY ?= "idbloader.img"
diff --git a/conf/machine/include/rk3399.inc b/conf/machine/include/rk3399.inc
index f6b7826..9f9f474 100644
--- a/conf/machine/include/rk3399.inc
+++ b/conf/machine/include/rk3399.inc
@@ -19,8 +19,6 @@ TFA_BUILD_TARGET = "bl31"
UBOOT_SUFFIX ?= "itb"
UBOOT_ENTRYPOINT ?= "0x06000000"
-SERIAL_CONSOLES = "115200;ttyS2"
-
PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
SPL_BINARY ?= "idbloader.img"
diff --git a/conf/machine/include/rock-pi-4.inc b/conf/machine/include/rock-pi-4.inc
index 9c21084..a3e60c7 100644
--- a/conf/machine/include/rock-pi-4.inc
+++ b/conf/machine/include/rock-pi-4.inc
@@ -17,6 +17,4 @@ IMAGE_BOOT_FILES ?= "\
${KERNEL_IMAGETYPE} \
"
-SERIAL_CONSOLES = "1500000;ttyS2"
-
MACHINE_EXTRA_RRECOMMENDS += "kernel-modules"
diff --git a/conf/machine/include/rockchip-defaults.inc b/conf/machine/include/rockchip-defaults.inc
index a4e2a2c..fe4052e 100644
--- a/conf/machine/include/rockchip-defaults.inc
+++ b/conf/machine/include/rockchip-defaults.inc
@@ -21,6 +21,9 @@ XSERVER = " \
"
# misc
+RK_CONSOLE_DEVICE ?= "ttyS2"
+RK_CONSOLE_BAUD ?= "1500000"
+SERIAL_CONSOLES = "${RK_CONSOLE_BAUD};${RK_CONSOLE_DEVICE}"
IMAGE_FSTYPES += "ext4"
# boot device (sd-card/emmc)
diff --git a/conf/machine/marsboard-rk3066.conf b/conf/machine/marsboard-rk3066.conf
index 09414bc..52fd256 100644
--- a/conf/machine/marsboard-rk3066.conf
+++ b/conf/machine/marsboard-rk3066.conf
@@ -8,5 +8,4 @@
require conf/machine/include/rk3066.inc
-SERIAL_CONSOLES = "115200;ttyS2"
KERNEL_DEVICETREE = "rk3066a-marsboard.dtb"
diff --git a/conf/machine/radxarock.conf b/conf/machine/radxarock.conf
index 2036f6a..42d8848 100644
--- a/conf/machine/radxarock.conf
+++ b/conf/machine/radxarock.conf
@@ -9,5 +9,4 @@
require conf/machine/include/rk3188.inc
-SERIAL_CONSOLES = "115200;ttyFIQ0"
KERNEL_DEVICETREE = "rk3188-radxarock.dtb"
--
2.30.0.rc0
next reply other threads:[~2021-06-23 15:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-23 15:24 Trevor Woerner [this message]
2021-06-23 15:24 ` [meta-rockchip][PATCH 2/4] wic console device and baud Trevor Woerner
2021-06-23 15:24 ` [meta-rockchip][PATCH 3/4] machine common include cleanup Trevor Woerner
2021-06-23 15:24 ` [meta-rockchip][PATCH 4/4] wic/wks cleanup Trevor Woerner
2021-06-23 15:32 ` [yocto] [meta-rockchip][PATCH 1/4] centralize console settings Khem Raj
2021-06-23 18:10 ` Yann Dirson
2021-06-23 18:51 ` Trevor Woerner
2021-06-23 19:38 ` Yann Dirson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210623152457.35324-1-twoerner@gmail.com \
--to=twoerner@gmail.com \
--cc=yocto@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox