Re: [yocto] #raspberrypi

[wojciech.st@tutanota.com]

[-- Attachment #1: Type: text/plain, Size: 3050 bytes --]

Hi Khem

Replacing 
IMAGE_INSTALL += "i2c-tools vim"
withIMAGE_INSTALL_append = " i2c-tools vim"

in my local.conf solve the problem.

More than half of the sources were rebuild.

Thanks a lot.

Now I found also the info in the manual "Using IMAGE_INSTALL with the += operator from the /conf/local.conf file or from within                    an image recipe is not recommended as it can cause ordering                    issues."

Regards,

Wojciech 
-- 
 Securely sent with Tutanota. Get your own encrypted, ad-free mailbox: 
 https://tutanota.com


Dec 17, 2019, 05:48 by raj.khem@gmail.com:

> On Mon, Dec 16, 2019 at 1:56 PM <wojciech.st@tutanota.com> wrote:
>
>>
>> Problem with rootfs boot on my raspberrypi.
>>
>> Hi
>> I am building simple image for my raspbery pi 3 A+ and connect to the pi via USB-UART converter and see the following in the console
>> ...
>> [ 2.071459] Run /bin/init as init process
>> [ 2.076507] Run /bin/sh as init process
>> sh: cannot set terminal process group (-1): Inappropriate ioctl for device
>> sh: no job control in this shell
>> sh-4.4#
>>
>>
>>
>> I build with the "bitbake core-image-base" and tried to run it on rpi 3A+, 3B, 3B+ and the problem is always the same it cannot switch to the rootfs on the sd card it seem like it stack at initramfs or some middle ground.
>>
>> I burn the *.rpi-sdimg image to SD card with dd from my Ubuntu16.04 host machine.
>> I tried with two branches thud and warrior and the problem is exactly the same.
>> The strange thing is that in this initramfs there are no tools like find grep modprobe etc. but I see my extra tools "i2c-tools vim"
>>
>> Here is my local.conf adjustments:
>> MACHINE ?= "raspberrypi3"
>> ENABLE_I2C = "1"
>> ENABLE_UART = "1"
>> IMAGE_INSTALL += "i2c-tools vim"
>>
>
> Can you turn this into
> IMAGE_INSTALL_append = " i2c-tools vim"
>
>>
>> and the bblayer.conf
>> BBLAYERS ?= " \
>>  /media/dave/Develop/yoctopi/warrior/sources/poky/meta \
>>  /media/dave/Develop/yoctopi/warrior/sources/poky/meta-poky \
>>  /media/dave/Develop/yoctopi/warrior/sources/poky/meta-yocto-bsp \
>>  /media/dave/Develop/yoctopi/warrior/sources/meta-openembedded/meta-oe \
>>  /media/dave/Develop/yoctopi/warrior/sources/meta-raspberrypi \
>>  "
>>
>> I tried also to build with the deprecated image "bitbake rpi-basic-image" but then I did not get my extra tools "i2c-tools vim".
>>
>> Anyone have any idea what can be wrong with my approach ?
>>
>> Regards,
>>
>> Wojciech
>>
>>
>> -=-=-=-=-=-=-=-=-=-=-=-
>> Links: You receive all messages sent to this group.
>>
>> View/Reply Online (#47702): https://lists.yoctoproject.org/g/yocto/message/47702
>> Mute This Topic: https://lists.yoctoproject.org/mt/68744766/1997914
>> Mute #raspberrypi: https://lists.yoctoproject.org/mk?hashtag=raspberrypi&subid=6692173
>> Group Owner: yocto+owner@lists.yoctoproject.org
>> Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub  [raj.khem@gmail.com]
>> -=-=-=-=-=-=-=-=-=-=-=-
>>


[-- Attachment #2: Type: text/html, Size: 4734 bytes --]