All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
	syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] INFO: task hung in __input_unregister_device (4)
Date: Sun, 03 Jul 2022 21:39:06 -0700	[thread overview]
Message-ID: <000000000000f1138c05e2f35061@google.com> (raw)
In-Reply-To: <20220704042001.1830-1-hdanton@sina.com>

Hello,

syzbot has tested the proposed patch but the reproducer is still triggering an issue:
INFO: task hung in input_unregister_handle

INFO: task kworker/1:2:143 blocked for more than 143 seconds.
      Not tainted 5.19.0-rc4-syzkaller-00125-ga175eca0f3d7-dirty #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:2     state:D stack:23672 pid:  143 ppid:     2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5146 [inline]
 __schedule+0xa00/0x4b50 kernel/sched/core.c:6458
 schedule+0xd2/0x1f0 kernel/sched/core.c:6530
 schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6589
 __mutex_lock_common kernel/locking/mutex.c:679 [inline]
 __mutex_lock+0xa70/0x1350 kernel/locking/mutex.c:747
 input_unregister_handle+0x128/0x290 drivers/input/input.c:2592
 joydev_disconnect+0xfb/0x150 drivers/input/joydev.c:1023
 __input_unregister_device+0x1f1/0x460 drivers/input/input.c:2238
 input_unregister_device+0xb4/0xf0 drivers/input/input.c:2428
 iforce_usb_disconnect+0x5e/0xf0 drivers/input/joystick/iforce/iforce-usb.c:261
 usb_unbind_interface+0x1d8/0x8e0 drivers/usb/core/driver.c:458
 device_remove drivers/base/dd.c:545 [inline]
 device_remove+0x11f/0x170 drivers/base/dd.c:537
 __device_release_driver drivers/base/dd.c:1222 [inline]
 device_release_driver_internal+0x4a1/0x700 drivers/base/dd.c:1248
 bus_remove_device+0x2eb/0x5a0 drivers/base/bus.c:529
 device_del+0x4f3/0xc80 drivers/base/core.c:3604
 usb_disable_device+0x35b/0x7b0 drivers/usb/core/message.c:1419
 usb_disconnect.cold+0x278/0x6ec drivers/usb/core/hub.c:2228
 hub_port_connect drivers/usb/core/hub.c:5207 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
 port_event drivers/usb/core/hub.c:5663 [inline]
 hub_event+0x1e83/0x4690 drivers/usb/core/hub.c:5745
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 process_scheduled_works kernel/workqueue.c:2352 [inline]
 worker_thread+0x854/0x1080 kernel/workqueue.c:2438
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>

Showing all locks held in the system:
1 lock held by khungtaskd/28:
 #0: ffffffff8bd86660 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6491
3 locks held by kworker/u4:2/41:
7 locks held by kworker/1:2/143:
 #0: ffff888011a65938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
 #0: ffff888011a65938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline]
 #0: ffff888011a65938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1280 [inline]
 #0: ffff888011a65938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:636 [inline]
 #0: ffff888011a65938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:663 [inline]
 #0: ffff888011a65938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x87a/0x1610 kernel/workqueue.c:2260
 #1: ffffc90002b9fda8 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x8ae/0x1610 kernel/workqueue.c:2264
 #2: ffff88802011d190 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:835 [inline]
 #2: ffff88802011d190 (&dev->mutex){....}-{3:3}, at: hub_event+0x1c1/0x4690 drivers/usb/core/hub.c:5691
 #3: ffff88807b888190 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:835 [inline]
 #3: ffff88807b888190 (&dev->mutex){....}-{3:3}, at: usb_disconnect.cold+0x43/0x6ec drivers/usb/core/hub.c:2219
 #4: ffff88807a420118 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:835 [inline]
 #4: ffff88807a420118 (&dev->mutex){....}-{3:3}, at: __device_driver_lock drivers/base/dd.c:1054 [inline]
 #4: ffff88807a420118 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0xa0/0x700 drivers/base/dd.c:1245
 #5: ffffffff8ceafca8 (input_mutex){+.+.}-{3:3}, at: __input_unregister_device+0x158/0x460 drivers/input/input.c:2235
 #6: ffff88807a4212c0 (&dev->mutex#2){+.+.}-{3:3}, at: input_unregister_handle+0x128/0x290 drivers/input/input.c:2592
2 locks held by acpid/2962:
 #0: ffff88807a120158 (&joydev->mutex){+.+.}-{3:3}, at: joydev_close_device drivers/input/joydev.c:220 [inline]
 #0: ffff88807a120158 (&joydev->mutex){+.+.}-{3:3}, at: joydev_release+0x187/0x290 drivers/input/joydev.c:252
 #1: ffff88807a4212c0 (&dev->mutex#2){+.+.}-{3:3}, at: input_close_device+0x42/0x1f0 drivers/input/input.c:726
2 locks held by getty/3288:
 #0: ffff88814b342098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x22/0x80 drivers/tty/tty_ldisc.c:244
 #1: ffffc90002d162e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0xe50/0x13c0 drivers/tty/n_tty.c:2124
2 locks held by udevd/4098:
 #0: ffff88807a424110 (&evdev->mutex){+.+.}-{3:3}, at: evdev_open_device drivers/input/evdev.c:393 [inline]
 #0: ffff88807a424110 (&evdev->mutex){+.+.}-{3:3}, at: evdev_open+0x2f3/0x6a0 drivers/input/evdev.c:487
 #1: ffff88807a4212c0 (&dev->mutex#2){+.+.}-{3:3}, at: input_open_device+0x4a/0x320 drivers/input/input.c:656

=============================================

NMI backtrace for cpu 1
CPU: 1 PID: 28 Comm: khungtaskd Not tainted 5.19.0-rc4-syzkaller-00125-ga175eca0f3d7-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
 nmi_trigger_cpumask_backtrace+0x1e6/0x230 lib/nmi_backtrace.c:62
 trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
 check_hung_uninterruptible_tasks kernel/hung_task.c:212 [inline]
 watchdog+0xc1d/0xf50 kernel/hung_task.c:369
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 41 Comm: kworker/u4:2 Not tainted 5.19.0-rc4-syzkaller-00125-ga175eca0f3d7-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
Workqueue: events_unbound toggle_allocation_gate
RIP: 0010:mark_held_locks+0xc1/0xe0 kernel/locking/lockdep.c:4239
Code: 4c 89 e7 e8 51 e6 ff ff 85 c0 74 12 83 c3 01 41 39 9c 24 58 0a 00 00 7f a9 b8 01 00 00 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e <c3> e8 c9 3f 69 00 e9 6d ff ff ff 48 89 34 24 e8 9b 3f 69 00 48 8b
RSP: 0018:ffffc90000b27998 EFLAGS: 00000092
RAX: 0000000000000001 RBX: ffff888011b19d80 RCX: 1ffffffff20d0d76
RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffffffff90686bb0
RBP: ffff888011b19d80 R08: 0000000000000000 R09: ffffffff9067f917
R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff812c131f
R13: 0000000000000004 R14: 0000000000000aa8 R15: ffffffff8bec6480
FS:  0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7f22bcc110 CR3: 000000000ba8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __trace_hardirqs_on_caller kernel/locking/lockdep.c:4252 [inline]
 lockdep_hardirqs_on_prepare kernel/locking/lockdep.c:4319 [inline]
 lockdep_hardirqs_on_prepare+0x135/0x400 kernel/locking/lockdep.c:4271
 trace_hardirqs_on+0x2d/0x120 kernel/trace/trace_preemptirq.c:49
 __text_poke+0x6df/0x8e0 arch/x86/kernel/alternative.c:1112
 text_poke arch/x86/kernel/alternative.c:1137 [inline]
 text_poke_bp_batch+0x382/0x6c0 arch/x86/kernel/alternative.c:1432
 text_poke_flush arch/x86/kernel/alternative.c:1589 [inline]
 text_poke_flush arch/x86/kernel/alternative.c:1586 [inline]
 text_poke_finish+0x16/0x30 arch/x86/kernel/alternative.c:1596
 arch_jump_label_transform_apply+0x13/0x20 arch/x86/kernel/jump_label.c:146
 jump_label_update+0x32f/0x410 kernel/jump_label.c:830
 static_key_disable_cpuslocked+0x152/0x1b0 kernel/jump_label.c:207
 static_key_disable+0x16/0x20 kernel/jump_label.c:215
 toggle_allocation_gate mm/kfence/core.c:825 [inline]
 toggle_allocation_gate+0x183/0x390 mm/kfence/core.c:803
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>
----------------
Code disassembly (best guess):
   0:	4c 89 e7             	mov    %r12,%rdi
   3:	e8 51 e6 ff ff       	callq  0xffffe659
   8:	85 c0                	test   %eax,%eax
   a:	74 12                	je     0x1e
   c:	83 c3 01             	add    $0x1,%ebx
   f:	41 39 9c 24 58 0a 00 	cmp    %ebx,0xa58(%r12)
  16:	00
  17:	7f a9                	jg     0xffffffc2
  19:	b8 01 00 00 00       	mov    $0x1,%eax
  1e:	48 83 c4 08          	add    $0x8,%rsp
  22:	5b                   	pop    %rbx
  23:	5d                   	pop    %rbp
  24:	41 5c                	pop    %r12
  26:	41 5d                	pop    %r13
  28:	41 5e                	pop    %r14
* 2a:	c3                   	retq <-- trapping instruction
  2b:	e8 c9 3f 69 00       	callq  0x693ff9
  30:	e9 6d ff ff ff       	jmpq   0xffffffa2
  35:	48 89 34 24          	mov    %rsi,(%rsp)
  39:	e8 9b 3f 69 00       	callq  0x693fd9
  3e:	48                   	rex.W
  3f:	8b                   	.byte 0x8b


Tested on:

commit:         a175eca0 Merge tag 'drm-fixes-2022-07-01' of git://ano..
git tree:       http://kernel.source.codeaurora.cn/pub/scm/linux/kernel/git/torvalds/linux.git
console output: https://syzkaller.appspot.com/x/log.txt?x=1422b968080000
kernel config:  https://syzkaller.appspot.com/x/.config?x=833001d0819ddbc9
dashboard link: https://syzkaller.appspot.com/bug?extid=deb6abc36aad4008f407
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch:          https://syzkaller.appspot.com/x/patch.diff?x=130ec148080000


       reply	other threads:[~2022-07-04  4:39 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220704042001.1830-1-hdanton@sina.com>
2022-07-04  4:39 ` syzbot [this message]
     [not found] <20220724003356.2425-1-hdanton@sina.com>
2022-07-24  2:58 ` [syzbot] INFO: task hung in __input_unregister_device (4) syzbot
     [not found] <20220704031413.1709-1-hdanton@sina.com>
2022-07-04  3:33 ` syzbot
     [not found] <20220703091039.1538-1-hdanton@sina.com>
2022-07-03 14:11 ` syzbot
     [not found] <20220703081120.1414-1-hdanton@sina.com>
2022-07-03  8:32 ` syzbot
     [not found] <20220703073138.1297-1-hdanton@sina.com>
2022-07-03  7:57 ` syzbot
     [not found] <20220702234214.903-1-hdanton@sina.com>
2022-07-03  6:09 ` syzbot
2022-07-02  5:32 syzbot
2022-07-02 15:32 ` syzbot
2022-07-22 13:33   ` Fabio M. De Francesco
2022-07-22 13:53     ` syzbot
2022-07-02 22:16 ` syzbot
2022-07-21 11:11 ` Tetsuo Handa
2022-07-21 14:45   ` Fabio M. De Francesco
2022-07-21 15:06     ` Tetsuo Handa
2022-07-21 16:53       ` Fabio M. De Francesco
2022-07-21 18:16         ` Fabio M. De Francesco
2022-07-22 14:39         ` Tetsuo Handa
2022-07-22 19:15           ` Fabio M. De Francesco
2022-07-22 19:25             ` Fabio M. De Francesco
2022-07-23  5:38             ` Tetsuo Handa
2022-07-26  3:53               ` Tetsuo Handa
2022-07-26  4:40                 ` Fabio M. De Francesco

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=000000000000f1138c05e2f35061@google.com \
    --to=syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com \
    --cc=hdanton@sina.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.