All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
	syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] INFO: task hung in __input_unregister_device (4)
Date: Sun, 03 Jul 2022 20:33:07 -0700	[thread overview]
Message-ID: <000000000000fe6f6705e2f26465@google.com> (raw)
In-Reply-To: <20220704031413.1709-1-hdanton@sina.com>

Hello,

syzbot has tested the proposed patch but the reproducer is still triggering an issue:
INFO: task hung in joydev_cleanup

INFO: task kworker/0:0:6 blocked for more than 143 seconds.
      Not tainted 5.19.0-rc4-syzkaller-00125-ga175eca0f3d7-dirty #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0     state:D stack:24472 pid:    6 ppid:     2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5146 [inline]
 __schedule+0xa00/0x4b50 kernel/sched/core.c:6458
 schedule+0xd2/0x1f0 kernel/sched/core.c:6530
 schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6589
 __mutex_lock_common kernel/locking/mutex.c:679 [inline]
 __mutex_lock+0xa70/0x1350 kernel/locking/mutex.c:747
 joydev_mark_dead drivers/input/joydev.c:731 [inline]
 joydev_cleanup+0x21/0x190 drivers/input/joydev.c:740
 joydev_disconnect+0x45/0xb0 drivers/input/joydev.c:1022
 __input_unregister_device+0x1f1/0x460 drivers/input/input.c:2238
 input_unregister_device+0xb4/0xf0 drivers/input/input.c:2428
 iforce_usb_disconnect+0x5e/0xf0 drivers/input/joystick/iforce/iforce-usb.c:261
 usb_unbind_interface+0x1d8/0x8e0 drivers/usb/core/driver.c:458
 device_remove drivers/base/dd.c:545 [inline]
 device_remove+0x11f/0x170 drivers/base/dd.c:537
 __device_release_driver drivers/base/dd.c:1222 [inline]
 device_release_driver_internal+0x4a1/0x700 drivers/base/dd.c:1248
 bus_remove_device+0x2eb/0x5a0 drivers/base/bus.c:529
 device_del+0x4f3/0xc80 drivers/base/core.c:3604
 usb_disable_device+0x35b/0x7b0 drivers/usb/core/message.c:1419
 usb_disconnect.cold+0x278/0x6ec drivers/usb/core/hub.c:2228
 hub_port_connect drivers/usb/core/hub.c:5207 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5507 [inline]
 port_event drivers/usb/core/hub.c:5663 [inline]
 hub_event+0x1e83/0x4690 drivers/usb/core/hub.c:5745
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 process_scheduled_works kernel/workqueue.c:2352 [inline]
 worker_thread+0x854/0x1080 kernel/workqueue.c:2438
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>

Showing all locks held in the system:
7 locks held by kworker/0:0/6:
 #0: ffff8881459c3938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
 #0: ffff8881459c3938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline]
 #0: ffff8881459c3938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1280 [inline]
 #0: ffff8881459c3938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:636 [inline]
 #0: ffff8881459c3938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:663 [inline]
 #0: ffff8881459c3938 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x87a/0x1610 kernel/workqueue.c:2260
 #1: ffffc900000b7da8 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x8ae/0x1610 kernel/workqueue.c:2264
 #2: ffff888147879190 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:835 [inline]
 #2: ffff888147879190 (&dev->mutex){....}-{3:3}, at: hub_event+0x1c1/0x4690 drivers/usb/core/hub.c:5691
 #3: ffff8880173a9190 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:835 [inline]
 #3: ffff8880173a9190 (&dev->mutex){....}-{3:3}, at: usb_disconnect.cold+0x43/0x6ec drivers/usb/core/hub.c:2219
 #4: ffff8880173ae118 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:835 [inline]
 #4: ffff8880173ae118 (&dev->mutex){....}-{3:3}, at: __device_driver_lock drivers/base/dd.c:1054 [inline]
 #4: ffff8880173ae118 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0xa0/0x700 drivers/base/dd.c:1245
 #5: ffffffff8ceafca8 (input_mutex){+.+.}-{3:3}, at: __input_unregister_device+0x158/0x460 drivers/input/input.c:2235
 #6: ffff88807bab4158 (&joydev->mutex){+.+.}-{3:3}, at: joydev_mark_dead drivers/input/joydev.c:731 [inline]
 #6: ffff88807bab4158 (&joydev->mutex){+.+.}-{3:3}, at: joydev_cleanup+0x21/0x190 drivers/input/joydev.c:740
1 lock held by khungtaskd/28:
 #0: ffffffff8bd86660 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6491
2 locks held by acpid/2960:
 #0: ffff88807bab4158 (&joydev->mutex){+.+.}-{3:3}, at: joydev_close_device drivers/input/joydev.c:220 [inline]
 #0: ffff88807bab4158 (&joydev->mutex){+.+.}-{3:3}, at: joydev_release+0x187/0x290 drivers/input/joydev.c:252
 #1: ffff8880173af2c0 (&dev->mutex#2){+.+.}-{3:3}, at: input_close_device+0x42/0x1f0 drivers/input/input.c:726
2 locks held by getty/3287:
 #0: ffff88802616e098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x22/0x80 drivers/tty/tty_ldisc.c:244
 #1: ffffc90002d162e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0xe50/0x13c0 drivers/tty/n_tty.c:2124
2 locks held by udevd/4084:
 #0: ffff8881458fa110 (&evdev->mutex){+.+.}-{3:3}, at: evdev_open_device drivers/input/evdev.c:393 [inline]
 #0: ffff8881458fa110 (&evdev->mutex){+.+.}-{3:3}, at: evdev_open+0x2f3/0x6a0 drivers/input/evdev.c:487
 #1: ffff8880173af2c0 (&dev->mutex#2){+.+.}-{3:3}, at: input_open_device+0x4a/0x320 drivers/input/input.c:656

=============================================

NMI backtrace for cpu 1
CPU: 1 PID: 28 Comm: khungtaskd Not tainted 5.19.0-rc4-syzkaller-00125-ga175eca0f3d7-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
 nmi_trigger_cpumask_backtrace+0x1e6/0x230 lib/nmi_backtrace.c:62
 trigger_all_cpu_backtrace include/linux/nmi.h:146 [inline]
 check_hung_uninterruptible_tasks kernel/hung_task.c:212 [inline]
 watchdog+0xc1d/0xf50 kernel/hung_task.c:369
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 41 Comm: kworker/u4:2 Not tainted 5.19.0-rc4-syzkaller-00125-ga175eca0f3d7-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022
Workqueue: phy5 ieee80211_iface_work
RIP: 0010:next_tid mm/slub.c:2311 [inline]
RIP: 0010:___slab_alloc+0x74b/0xe20 mm/slub.c:2985
Code: 8b 34 24 48 89 43 10 8b 05 5e 20 f5 0b 85 c0 0f 85 80 03 00 00 48 8b 43 10 80 78 2b 00 0f 89 25 04 00 00 8b 45 28 49 8b 04 06 <48> 83 43 08 08 48 89 03 48 8b 5d 00 e8 c4 bf b0 07 89 c5 48 83 c3
RSP: 0018:ffffc90000b27700 EFLAGS: 00000082
RAX: ffff888020bfa000 RBX: ffff8880b9a3db80 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff888011841dc0 R08: 0000000000000000 R09: 0000000080100010
R10: ffffffff81c69e72 R11: 0000000000000000 R12: 000000000003dba0
R13: 0000000000000246 R14: ffff888020bfb000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4fd6a83110 CR3: 000000000ba8e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3118
 slab_alloc_node mm/slub.c:3209 [inline]
 slab_alloc mm/slub.c:3251 [inline]
 kmem_cache_alloc_trace+0x310/0x3f0 mm/slub.c:3282
 kmalloc include/linux/slab.h:600 [inline]
 kzalloc include/linux/slab.h:733 [inline]
 ieee802_11_parse_elems_crc+0xd5/0x1050 net/mac80211/util.c:1502
 ieee802_11_parse_elems net/mac80211/ieee80211_i.h:2257 [inline]
 ieee80211_bss_info_update+0x42c/0xb00 net/mac80211/scan.c:212
 ieee80211_rx_bss_info net/mac80211/ibss.c:1119 [inline]
 ieee80211_rx_mgmt_probe_beacon net/mac80211/ibss.c:1610 [inline]
 ieee80211_ibss_rx_queued_mgmt+0x1ab8/0x33f0 net/mac80211/ibss.c:1639
 ieee80211_iface_process_skb net/mac80211/iface.c:1527 [inline]
 ieee80211_iface_work+0xa78/0xd10 net/mac80211/iface.c:1581
 process_one_work+0x996/0x1610 kernel/workqueue.c:2289
 worker_thread+0x665/0x1080 kernel/workqueue.c:2436
 kthread+0x2e9/0x3a0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
 </TASK>
----------------
Code disassembly (best guess):
   0:	8b 34 24             	mov    (%rsp),%esi
   3:	48 89 43 10          	mov    %rax,0x10(%rbx)
   7:	8b 05 5e 20 f5 0b    	mov    0xbf5205e(%rip),%eax        # 0xbf5206b
   d:	85 c0                	test   %eax,%eax
   f:	0f 85 80 03 00 00    	jne    0x395
  15:	48 8b 43 10          	mov    0x10(%rbx),%rax
  19:	80 78 2b 00          	cmpb   $0x0,0x2b(%rax)
  1d:	0f 89 25 04 00 00    	jns    0x448
  23:	8b 45 28             	mov    0x28(%rbp),%eax
  26:	49 8b 04 06          	mov    (%r14,%rax,1),%rax
* 2a:	48 83 43 08 08       	addq   $0x8,0x8(%rbx) <-- trapping instruction
  2f:	48 89 03             	mov    %rax,(%rbx)
  32:	48 8b 5d 00          	mov    0x0(%rbp),%rbx
  36:	e8 c4 bf b0 07       	callq  0x7b0bfff
  3b:	89 c5                	mov    %eax,%ebp
  3d:	48                   	rex.W
  3e:	83                   	.byte 0x83
  3f:	c3                   	retq


Tested on:

commit:         a175eca0 Merge tag 'drm-fixes-2022-07-01' of git://ano..
git tree:       http://kernel.source.codeaurora.cn/pub/scm/linux/kernel/git/torvalds/linux.git
console output: https://syzkaller.appspot.com/x/log.txt?x=1626aa58080000
kernel config:  https://syzkaller.appspot.com/x/.config?x=833001d0819ddbc9
dashboard link: https://syzkaller.appspot.com/bug?extid=deb6abc36aad4008f407
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch:          https://syzkaller.appspot.com/x/patch.diff?x=15b3b658080000


       reply	other threads:[~2022-07-04  3:33 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220704031413.1709-1-hdanton@sina.com>
2022-07-04  3:33 ` syzbot [this message]
     [not found] <20220724003356.2425-1-hdanton@sina.com>
2022-07-24  2:58 ` [syzbot] INFO: task hung in __input_unregister_device (4) syzbot
     [not found] <20220704042001.1830-1-hdanton@sina.com>
2022-07-04  4:39 ` syzbot
     [not found] <20220703091039.1538-1-hdanton@sina.com>
2022-07-03 14:11 ` syzbot
     [not found] <20220703081120.1414-1-hdanton@sina.com>
2022-07-03  8:32 ` syzbot
     [not found] <20220703073138.1297-1-hdanton@sina.com>
2022-07-03  7:57 ` syzbot
     [not found] <20220702234214.903-1-hdanton@sina.com>
2022-07-03  6:09 ` syzbot
2022-07-02  5:32 syzbot
2022-07-02 15:32 ` syzbot
2022-07-22 13:33   ` Fabio M. De Francesco
2022-07-22 13:53     ` syzbot
2022-07-02 22:16 ` syzbot
2022-07-21 11:11 ` Tetsuo Handa
2022-07-21 14:45   ` Fabio M. De Francesco
2022-07-21 15:06     ` Tetsuo Handa
2022-07-21 16:53       ` Fabio M. De Francesco
2022-07-21 18:16         ` Fabio M. De Francesco
2022-07-22 14:39         ` Tetsuo Handa
2022-07-22 19:15           ` Fabio M. De Francesco
2022-07-22 19:25             ` Fabio M. De Francesco
2022-07-23  5:38             ` Tetsuo Handa
2022-07-26  3:53               ` Tetsuo Handa
2022-07-26  4:40                 ` Fabio M. De Francesco

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=000000000000fe6f6705e2f26465@google.com \
    --to=syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com \
    --cc=hdanton@sina.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.