From: Jonghwan Choi <jhbird.choi@samsung.com>
To: "'open list:CPU FREQUENCY DRI...'" <cpufreq@vger.kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org
Cc: "'Rafael J. Wysocki'" <rjw@rjwysocki.net>,
'Viresh Kumar' <viresh.kumar@linaro.org>,
'Kukjin Kim' <kgene.kim@samsung.com>
Subject: [PATCH 3/3] cpufreq: Pass third argument as function parameter is
Date: Wed, 30 Apr 2014 15:28:36 +0900 [thread overview]
Message-ID: <000201cf643d$6ac0da00$40428e00$@samsung.com> (raw)
In dev_pm_opp_init_cpufreq_table, flags parameter is added to
indicate descending order. If flags is zero, it is a ascending
order.
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
---
drivers/cpufreq/arm_big_little.c | 2 +-
drivers/cpufreq/cpufreq-cpu0.c | 2 +-
drivers/cpufreq/imx6q-cpufreq.c | 2 +-
drivers/cpufreq/omap-cpufreq.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/cpufreq/arm_big_little.c
b/drivers/cpufreq/arm_big_little.c
index bad2ed3..851f53b 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -332,7 +332,7 @@ static int _get_cluster_clk_and_freq_table(struct device
*cpu_dev)
goto out;
}
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster],
0);
if (ret) {
dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d,
err: %d\n",
__func__, cpu_dev->id, ret);
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 1bf6bba..2557860 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -158,7 +158,7 @@ static int cpu0_cpufreq_probe(struct platform_device
*pdev)
goto out_put_node;
}
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table, 0);
if (ret) {
pr_err("failed to init cpufreq table: %d\n", ret);
goto out_put_node;
diff --git a/drivers/cpufreq/imx6q-cpufreq.c
b/drivers/cpufreq/imx6q-cpufreq.c
index e27fca8..c2bf03f 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -212,7 +212,7 @@ static int imx6q_cpufreq_probe(struct platform_device
*pdev)
}
}
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table, 0);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
goto put_node;
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 5f69c9a..afe9bf8 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -119,7 +119,7 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
return PTR_ERR(policy->clk);
if (!freq_table) {
- result = dev_pm_opp_init_cpufreq_table(mpu_dev,
&freq_table);
+ result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table,
0);
if (result) {
dev_err(mpu_dev,
"%s: cpu%d: failed creating freq
table[%d]\n",
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: jhbird.choi@samsung.com (Jonghwan Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] cpufreq: Pass third argument as function parameter is
Date: Wed, 30 Apr 2014 15:28:36 +0900 [thread overview]
Message-ID: <000201cf643d$6ac0da00$40428e00$@samsung.com> (raw)
In dev_pm_opp_init_cpufreq_table, flags parameter is added to
indicate descending order. If flags is zero, it is a ascending
order.
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
---
drivers/cpufreq/arm_big_little.c | 2 +-
drivers/cpufreq/cpufreq-cpu0.c | 2 +-
drivers/cpufreq/imx6q-cpufreq.c | 2 +-
drivers/cpufreq/omap-cpufreq.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/cpufreq/arm_big_little.c
b/drivers/cpufreq/arm_big_little.c
index bad2ed3..851f53b 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -332,7 +332,7 @@ static int _get_cluster_clk_and_freq_table(struct device
*cpu_dev)
goto out;
}
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]);
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster],
0);
if (ret) {
dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d,
err: %d\n",
__func__, cpu_dev->id, ret);
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 1bf6bba..2557860 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -158,7 +158,7 @@ static int cpu0_cpufreq_probe(struct platform_device
*pdev)
goto out_put_node;
}
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table, 0);
if (ret) {
pr_err("failed to init cpufreq table: %d\n", ret);
goto out_put_node;
diff --git a/drivers/cpufreq/imx6q-cpufreq.c
b/drivers/cpufreq/imx6q-cpufreq.c
index e27fca8..c2bf03f 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -212,7 +212,7 @@ static int imx6q_cpufreq_probe(struct platform_device
*pdev)
}
}
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table, 0);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
goto put_node;
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 5f69c9a..afe9bf8 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -119,7 +119,7 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
return PTR_ERR(policy->clk);
if (!freq_table) {
- result = dev_pm_opp_init_cpufreq_table(mpu_dev,
&freq_table);
+ result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table,
0);
if (result) {
dev_err(mpu_dev,
"%s: cpu%d: failed creating freq
table[%d]\n",
--
1.7.10.4
next reply other threads:[~2014-04-30 6:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-30 6:28 Jonghwan Choi [this message]
2014-04-30 6:28 ` [PATCH 3/3] cpufreq: Pass third argument as function parameter is Jonghwan Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000201cf643d$6ac0da00$40428e00$@samsung.com' \
--to=jhbird.choi@samsung.com \
--cc=cpufreq@vger.kernel.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.