From: "Sricharan" <sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: 'Marek Szyprowski'
<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
robin.murphy-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org,
lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: RE: [PATCH v4 00/10] IOMMU probe deferral support
Date: Wed, 30 Nov 2016 16:58:33 +0530 [thread overview]
Message-ID: <000201d24afc$e5612a50$b0237ef0$@codeaurora.org> (raw)
In-Reply-To: <90b1ad92-f7e6-b512-0676-90b96af10710-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Hi Marek,
>
>On 2016-11-30 01:22, Sricharan R wrote:
>> This series calls the dma ops configuration for the devices
>> at a generic place so that it works for all busses.
>> The dma_configure_ops for a device is now called during
>> the device_attach callback just before the probe of the
>> bus/driver is called. Similarly dma_deconfigure is called during
>> device/driver_detach path.
>>
>> pci_bus_add_devices (platform/amba)(_device_create/driver_register)
>> | |
>> pci_bus_add_device (device_add/driver_register)
>> | |
>> device_attach device_initial_probe
>> | |
>> __device_attach_driver __device_attach_driver
>> |
>> driver_probe_device
>> |
>> really_probe
>> |
>> dma_configure
>>
>> Similarly on the device/driver_unregister path __device_release_driver is
>> called which inturn calls dma_deconfigure.
>>
>> Took the reworked patches [2] from Robin's branch and
>> rebased on top of Lorenzo's ACPI IORT ARM support series [3].
>>
>> Tested with platform and pci devices for probe deferral
>> and reprobe on arm64 based platform. Added the patches [9,10],
>> drivers: acpi: Configure acpi devices dma operation at probe time
>> drivers: acpi: Handle IOMMU lookup failure with deferred probing or error
>> for doing the dma ops configuration at probe time for acpi based platform
>> as well. Did not have a acpi based platform to test the changes and with
>> my still catching up knowledge on acpi/enumeration those two patches needs
>> to be reviewed/tested more.
>
>I've checked this patchset on my development boards: Odroid U3
>(ARM/Exynos4412),
>XU3 (ARM/Exynos5422) and TM2 (ARM64/Exynos5433) and my queued patches
>for Exynos
>IOMMU driver [1]. Besides the issue with an excessive dev_info, which
>causes NULL
>pointer dereference (reported in reply to patch #6), it works fine on
>all those
>platforms! Please add (again) my:
>
>Tested-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>
>[1] https://www.spinics.net/lists/linux-samsung-soc/msg56354.html
>
>> Previous post of this series [5].
Thanks for the testing every time.
Regards,
Sricharan
>>
>> [V4]
>> * Took the reworked patches [2] from Robin's branch and
>> rebased on top of Lorenzo's ACPI IORT ARM support series [3].
>>
>> * Added the patches for moving the dma ops configuration of
>> acpi based devices to probe time as well.
>> [V3]
>> * Removed the patch to split dma_masks/dma_ops configuration
>> separately based on review comments that both masks and ops are
>> required only during the device probe time.
>>
>> * Reworked the series based on Generic DT bindings series.
>>
>> * Added call to iommu's remove_device in the cleanup path for arm and
>> arm64.
>>
>> * Removed the notifier trick in arm64 to handle early device
>> registration.
>>
>> * Added reset of dma_ops in cleanup path for arm based on comments.
>>
>> * Fixed the pci_iommu_configure path and tested with PCI device as
>> well.
>>
>> * Fixed a bug to return the correct iommu_ops from patch 7 [4] in
>> last post.
>>
>> * Fixed few other cosmetic comments.
>>
>> [V2]
>> * Updated the Initial post to call dma_configure/deconfigure from
>> generic code
>>
>> * Added iommu add_device callback from of_iommu_configure path
>>
>> [V1]
>> * Initial post from Laurent Pinchart [1]
>>
>> [1] http://lists.linuxfoundation.org/pipermail/iommu/2015-May/013016.html
>> [2] http://www.linux-arm.org/git?p=linux-rm.git;a=shortlog;h=refs/heads/iommu/defer
>> [3] https://lkml.org/lkml/2016/11/21/141
>> [4] https://www.mail-archive.com/iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org/msg13940.html
>> [5] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-October/460832.html
>>
>> Laurent Pinchart (3):
>> of: dma: Move range size workaround to of_dma_get_range()
>> of: dma: Make of_dma_deconfigure() public
>> iommu: of: Handle IOMMU lookup failure with deferred probing or error
>>
>> Robin Murphy (3):
>> iommu/of: Refactor of_iommu_configure() for error handling
>> iommu/of: Prepare for deferred IOMMU configuration
>> iommu/arm-smmu: Clean up early-probing workarounds
>>
>> Sricharan R (4):
>> drivers: platform: Configure dma operations at probe time
>> arm64: dma-mapping: Remove the notifier trick to handle early setting
>> of dma_ops
>> drivers: acpi: Configure acpi devices dma operation at probe time
>> drivers: acpi: Handle IOMMU lookup failure with deferred probing or
>> error
>>
>> arch/arm64/mm/dma-mapping.c | 132 ++++----------------------------------------
>> drivers/acpi/arm64/iort.c | 17 +++++-
>> drivers/acpi/glue.c | 6 --
>> drivers/acpi/scan.c | 7 ++-
>> drivers/base/dd.c | 10 ++++
>> drivers/base/dma-mapping.c | 32 +++++++++++
>> drivers/iommu/arm-smmu-v3.c | 35 +-----------
>> drivers/iommu/arm-smmu.c | 58 +++----------------
>> drivers/iommu/dma-iommu.c | 1 +
>> drivers/iommu/of_iommu.c | 114 +++++++++++++++++++++++++++-----------
>> drivers/of/address.c | 20 ++++++-
>> drivers/of/device.c | 36 ++++++------
>> drivers/of/platform.c | 10 +---
>> drivers/pci/probe.c | 17 +++---
>> include/acpi/acpi_bus.h | 2 +-
>> include/linux/acpi.h | 7 ++-
>> include/linux/dma-mapping.h | 3 +
>> include/linux/of_device.h | 10 +++-
>> include/linux/pci.h | 5 ++
>> 19 files changed, 238 insertions(+), 284 deletions(-)
>>
>
>Best regards
>--
>Marek Szyprowski, PhD
>Samsung R&D Institute Poland
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 00/10] IOMMU probe deferral support
Date: Wed, 30 Nov 2016 16:58:33 +0530 [thread overview]
Message-ID: <000201d24afc$e5612a50$b0237ef0$@codeaurora.org> (raw)
In-Reply-To: <90b1ad92-f7e6-b512-0676-90b96af10710@samsung.com>
Hi Marek,
>
>On 2016-11-30 01:22, Sricharan R wrote:
>> This series calls the dma ops configuration for the devices
>> at a generic place so that it works for all busses.
>> The dma_configure_ops for a device is now called during
>> the device_attach callback just before the probe of the
>> bus/driver is called. Similarly dma_deconfigure is called during
>> device/driver_detach path.
>>
>> pci_bus_add_devices (platform/amba)(_device_create/driver_register)
>> | |
>> pci_bus_add_device (device_add/driver_register)
>> | |
>> device_attach device_initial_probe
>> | |
>> __device_attach_driver __device_attach_driver
>> |
>> driver_probe_device
>> |
>> really_probe
>> |
>> dma_configure
>>
>> Similarly on the device/driver_unregister path __device_release_driver is
>> called which inturn calls dma_deconfigure.
>>
>> Took the reworked patches [2] from Robin's branch and
>> rebased on top of Lorenzo's ACPI IORT ARM support series [3].
>>
>> Tested with platform and pci devices for probe deferral
>> and reprobe on arm64 based platform. Added the patches [9,10],
>> drivers: acpi: Configure acpi devices dma operation at probe time
>> drivers: acpi: Handle IOMMU lookup failure with deferred probing or error
>> for doing the dma ops configuration at probe time for acpi based platform
>> as well. Did not have a acpi based platform to test the changes and with
>> my still catching up knowledge on acpi/enumeration those two patches needs
>> to be reviewed/tested more.
>
>I've checked this patchset on my development boards: Odroid U3
>(ARM/Exynos4412),
>XU3 (ARM/Exynos5422) and TM2 (ARM64/Exynos5433) and my queued patches
>for Exynos
>IOMMU driver [1]. Besides the issue with an excessive dev_info, which
>causes NULL
>pointer dereference (reported in reply to patch #6), it works fine on
>all those
>platforms! Please add (again) my:
>
>Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>
>[1] https://www.spinics.net/lists/linux-samsung-soc/msg56354.html
>
>> Previous post of this series [5].
Thanks for the testing every time.
Regards,
Sricharan
>>
>> [V4]
>> * Took the reworked patches [2] from Robin's branch and
>> rebased on top of Lorenzo's ACPI IORT ARM support series [3].
>>
>> * Added the patches for moving the dma ops configuration of
>> acpi based devices to probe time as well.
>> [V3]
>> * Removed the patch to split dma_masks/dma_ops configuration
>> separately based on review comments that both masks and ops are
>> required only during the device probe time.
>>
>> * Reworked the series based on Generic DT bindings series.
>>
>> * Added call to iommu's remove_device in the cleanup path for arm and
>> arm64.
>>
>> * Removed the notifier trick in arm64 to handle early device
>> registration.
>>
>> * Added reset of dma_ops in cleanup path for arm based on comments.
>>
>> * Fixed the pci_iommu_configure path and tested with PCI device as
>> well.
>>
>> * Fixed a bug to return the correct iommu_ops from patch 7 [4] in
>> last post.
>>
>> * Fixed few other cosmetic comments.
>>
>> [V2]
>> * Updated the Initial post to call dma_configure/deconfigure from
>> generic code
>>
>> * Added iommu add_device callback from of_iommu_configure path
>>
>> [V1]
>> * Initial post from Laurent Pinchart [1]
>>
>> [1] http://lists.linuxfoundation.org/pipermail/iommu/2015-May/013016.html
>> [2] http://www.linux-arm.org/git?p=linux-rm.git;a=shortlog;h=refs/heads/iommu/defer
>> [3] https://lkml.org/lkml/2016/11/21/141
>> [4] https://www.mail-archive.com/iommu at lists.linux-foundation.org/msg13940.html
>> [5] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-October/460832.html
>>
>> Laurent Pinchart (3):
>> of: dma: Move range size workaround to of_dma_get_range()
>> of: dma: Make of_dma_deconfigure() public
>> iommu: of: Handle IOMMU lookup failure with deferred probing or error
>>
>> Robin Murphy (3):
>> iommu/of: Refactor of_iommu_configure() for error handling
>> iommu/of: Prepare for deferred IOMMU configuration
>> iommu/arm-smmu: Clean up early-probing workarounds
>>
>> Sricharan R (4):
>> drivers: platform: Configure dma operations at probe time
>> arm64: dma-mapping: Remove the notifier trick to handle early setting
>> of dma_ops
>> drivers: acpi: Configure acpi devices dma operation at probe time
>> drivers: acpi: Handle IOMMU lookup failure with deferred probing or
>> error
>>
>> arch/arm64/mm/dma-mapping.c | 132 ++++----------------------------------------
>> drivers/acpi/arm64/iort.c | 17 +++++-
>> drivers/acpi/glue.c | 6 --
>> drivers/acpi/scan.c | 7 ++-
>> drivers/base/dd.c | 10 ++++
>> drivers/base/dma-mapping.c | 32 +++++++++++
>> drivers/iommu/arm-smmu-v3.c | 35 +-----------
>> drivers/iommu/arm-smmu.c | 58 +++----------------
>> drivers/iommu/dma-iommu.c | 1 +
>> drivers/iommu/of_iommu.c | 114 +++++++++++++++++++++++++++-----------
>> drivers/of/address.c | 20 ++++++-
>> drivers/of/device.c | 36 ++++++------
>> drivers/of/platform.c | 10 +---
>> drivers/pci/probe.c | 17 +++---
>> include/acpi/acpi_bus.h | 2 +-
>> include/linux/acpi.h | 7 ++-
>> include/linux/dma-mapping.h | 3 +
>> include/linux/of_device.h | 10 +++-
>> include/linux/pci.h | 5 ++
>> 19 files changed, 238 insertions(+), 284 deletions(-)
>>
>
>Best regards
>--
>Marek Szyprowski, PhD
>Samsung R&D Institute Poland
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>linux-arm-kernel at lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2016-11-30 11:28 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20161130002326epcas2p462e9291a284c562b3cfeb2ee4339c5af@epcas2p4.samsung.com>
2016-11-30 0:22 ` [PATCH v4 00/10] IOMMU probe deferral support Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 01/10] iommu/of: Refactor of_iommu_configure() for error handling Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 02/10] iommu/of: Prepare for deferred IOMMU configuration Sricharan R
2016-11-30 0:22 ` Sricharan R
[not found] ` <1480465344-11862-3-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-30 16:17 ` Lorenzo Pieralisi
2016-11-30 16:17 ` Lorenzo Pieralisi
2016-11-30 16:42 ` Robin Murphy
2016-11-30 16:42 ` Robin Murphy
2016-12-01 11:29 ` Lorenzo Pieralisi
2016-12-01 11:29 ` Lorenzo Pieralisi
2016-12-01 11:50 ` Sricharan
2016-12-01 11:50 ` Sricharan
2017-01-05 8:34 ` Sricharan
2017-01-05 8:34 ` Sricharan
2017-01-05 12:27 ` Lorenzo Pieralisi
2017-01-05 12:27 ` Lorenzo Pieralisi
2017-01-05 13:52 ` Robin Murphy
2017-01-05 13:52 ` Robin Murphy
[not found] ` <7cd7bcfb-abae-2948-c3f8-230c0d9c9db6-5wv7dgnIgG8@public.gmane.org>
2017-01-05 14:51 ` Sricharan
2017-01-05 14:51 ` Sricharan
2017-01-06 16:24 ` Lorenzo Pieralisi
2017-01-06 16:24 ` Lorenzo Pieralisi
2017-01-19 14:40 ` Lorenzo Pieralisi
2017-01-19 14:40 ` Lorenzo Pieralisi
2017-01-19 15:10 ` Sricharan
2017-01-19 15:10 ` Sricharan
2017-01-05 15:35 ` Lorenzo Pieralisi
2017-01-05 15:35 ` Lorenzo Pieralisi
2016-11-30 0:22 ` [PATCH 03/10] of: dma: Move range size workaround to of_dma_get_range() Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 04/10] of: dma: Make of_dma_deconfigure() public Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 05/10] drivers: platform: Configure dma operations at probe time Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 06/10] iommu: of: Handle IOMMU lookup failure with deferred probing or error Sricharan R
2016-11-30 0:22 ` Sricharan R
[not found] ` <1480465344-11862-7-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-30 7:54 ` Marek Szyprowski
2016-11-30 7:54 ` Marek Szyprowski
[not found] ` <8e91ce72-9d37-f4be-9224-856a1a4c3e1d-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-11-30 11:27 ` Sricharan
2016-11-30 11:27 ` Sricharan
2016-11-30 12:57 ` Robin Murphy
2016-11-30 12:57 ` Robin Murphy
[not found] ` <5043bd01-2fc3-851d-2d6f-ba5fea96c774-5wv7dgnIgG8@public.gmane.org>
2016-11-30 14:01 ` Sricharan
2016-11-30 14:01 ` Sricharan
2016-11-30 0:22 ` [PATCH 07/10] arm64: dma-mapping: Remove the notifier trick to handle early setting of dma_ops Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 08/10] iommu/arm-smmu: Clean up early-probing workarounds Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 09/10] drivers: acpi: Configure acpi devices dma operation at probe time Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 0:22 ` [PATCH 10/10] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error Sricharan R
2016-11-30 0:22 ` Sricharan R
2016-11-30 8:19 ` [PATCH v4 00/10] IOMMU probe deferral support Marek Szyprowski
2016-11-30 8:19 ` Marek Szyprowski
[not found] ` <90b1ad92-f7e6-b512-0676-90b96af10710-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-11-30 11:28 ` Sricharan [this message]
2016-11-30 11:28 ` Sricharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000201d24afc$e5612a50$b0237ef0$@codeaurora.org' \
--to=sricharan-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=robin.murphy-5wv7dgnIgG8@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.