From: "Jonathan Leong" <aptos@gmx.net>
To: <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer
Date: Thu, 13 Oct 2005 21:56:43 +0800 [thread overview]
Message-ID: <000701c5cffd$f4e8cc20$6701a8c0@mainframe> (raw)
In-Reply-To: 1129210251.6308.0.camel@localhost.localdomain
Hi Marcel,
It should be the BPA-100. According to your website, I reckon it belongs to
the first generation (08fd:0001) .
The device isnt marked Tektronix but Digianswer A/S Bluetooth Protocol
Analyzer but shouldn't be much of a difference.
The loaded driver is hci_usb instead of bpa10x, maybe the driver was
missing? modprobe bpa10x.ko gave me an error.
Regards,
Jonathan Leong
----- Original Message -----
From: "Marcel Holtmann" <marcel@holtmann.org>
To: <bluez-users@lists.sourceforge.net>
Sent: Thursday, October 13, 2005 9:30 PM
Subject: Re: [Bluez-users] Help with Digianswer protocol analyzer
> Hi Jonathan,
>
>> > show me the content of /proc/bus/usb/devices and check if you have the
>> > bpa10x kernel driver. If not then you might need to install a newer
>> > kernel.
>>
>> here we go,
>>
>> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
>> P: Vendor=08fd ProdID=0001 Rev= 1.00
>> C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=300mA
>> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=hci_usb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>
>> Meanwhile, I'll go upgrade my kernel to 2.6.13 and get it patch.
>> I'll post the results in a bit.
>
> this won't help, I think. Is this the BPA-100 or the BPA-105?
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads, discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2005-10-13 13:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-13 10:30 [Bluez-users] Help with Digianswer protocol analyzer Jonathan Leong
2005-10-13 11:06 ` Marcel Holtmann
2005-10-13 12:51 ` Jonathan Leong
2005-10-13 13:30 ` Marcel Holtmann
2005-10-13 13:56 ` Jonathan Leong [this message]
2005-10-13 14:11 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000701c5cffd$f4e8cc20$6701a8c0@mainframe' \
--to=aptos@gmx.net \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.