WG: Interlaced mode on intel Clarkdale only colored stripes

["Atechsystem" <Atechsystem@freenet.de>]

Hello,

> Von: Paulo Zanoni [mailto:przanoni@gmail.com] Maybe the best tree to 
>test is this:
>http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=drm-intel-next-queued

Thanks, compiling from this repro solved my problem. With my TV I have to
use the xorg modeline, without it I can't select the interlaced modes. If I
use my NEC monitor I can select the I modeline by using the lxde monitor
setting tool. I think my TV don't report the I modelines.

Thanks for this patch

Regards
Atech

-----Ursprüngliche Nachricht-----
Von: intel-gfx-bounces+atechsystem=freenet.de@lists.freedesktop.org
[mailto:intel-gfx-bounces+atechsystem=freenet.de@lists.freedesktop.org] Im
Auftrag von Atechsystem
Gesendet: Montag, 13. Februar 2012 20:05
An: 'Paulo Zanoni'
Cc: intel-gfx@lists.freedesktop.org
Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored
stripes

> Von: Paulo Zanoni [mailto:przanoni@gmail.com] Maybe the best tree to 
>test is this:
>http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=drm-intel-next-que
>ued

I will compile it now. Before I used the drm-intel-next branch. I downloaded
the latest tar.gz file and didn't use git to checkout the branch.

>Rodrigo Vivi [mailto:rodrigo.vivi@gmail.com] The git repo is right, but 
>are you sure you are using the
remotes/origin/interlaced branch?
>It is strange that you couldn't see any interlace mode without using 
>the
handmade modeline. 

No chance to select it directly. I 've no clue to select it by standard lxde
dialog.

-----Ursprüngliche Nachricht-----
Von: Paulo Zanoni [mailto:przanoni@gmail.com]
Gesendet: Montag, 13. Februar 2012 19:56
An: Atechsystem
Cc: Intel Graphics Development
Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored
stripes

2012/2/13 Atechsystem <Atechsystem@freenet.de>:
> I compiled it from here: git://people.freedesktop.org/~danvet/drm

Did you change to the "interlaced" branch?

Maybe the best tree to test is this:
http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=drm-intel-next-queued

(repository is drm-intel and branch is drm-intel-next-queued).

> I added for example:
> Modeline    "1920x1080@50i"     74.25 1920 2448 2492 2640 1080 1084
> 1094
> 1124 interlace +hsync +vsync
>
> Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, 
> 30Hz, 25Hz and 24Hz.

This should not be needed. If you have the correct branch, you don't need
any configuration tweak: just boot the machine, plug a monitor that supports
interlaced modes, and "xrandr --verbose" will show you some interlaced
modes.

Please confirm that you are using the correct branch first. Use "git log" or
"git branch" commands to check.


--
Paulo Zanoni

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx