From: "Atechsystem" <Atechsystem@freenet.de>
To: intel-gfx@lists.freedesktop.org
Subject: Interlaced mode on intel Clarkdale only colored stripes
Date: Mon, 13 Feb 2012 19:44:41 +0100 [thread overview]
Message-ID: <00b901ccea7f$8c920df0$a5b629d0$@freenet.de> (raw)
In-Reply-To:
[-- Attachment #1: Type: text/plain, Size: 2653 bytes --]
-----Ursprüngliche Nachricht-----
Von: Atechsystem [mailto:Atechsystem@freenet.de]
Gesendet: Montag, 13. Februar 2012 19:44
An: 'Paulo Zanoni'
Betreff: AW: [Intel-gfx] Interlaced mode on intel Clarkdale only colored
stripes
Hi,
thanks for your quick reply.
>Paulo Zanoni [mailto:przanoni@gmail.com] Which git repo and which
>branch exactly? You may have a repo without the patches that fix interlaced
modes.
I compiled it from here: git://people.freedesktop.org/~danvet/drm
>Which line did you add to xorg.conf? What exactly did you do in this
>step? Please try to remove every xorg configuration file and test again
>with the default configuration
I added for example:
Modeline "1920x1080@50i" 74.25 1920 2448 2492 2640 1080 1084 1094
1124 interlace +hsync +vsync
Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, 30Hz,
25Hz and 24Hz.
>Please attach the TV, then run "xrandr --verbose" and send us the output.
Please also send the output of intel_reg_dumper:
>http://intellinuxgraphics.org/intel_reg_dumper.html
Please find files attached.
-----Ursprüngliche Nachricht-----
Von: Paulo Zanoni [mailto:przanoni@gmail.com]
Gesendet: Montag, 13. Februar 2012 18:58
An: Atechsystem
Cc: daniel@ffwll.ch; intel-gfx@lists.freedesktop.org
Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored
stripes
Hi
2012/2/13 Atechsystem <Atechsystem@freenet.de>:
> I compiled the kernel from your git repro to test interlaced output
> with my Clarkdale (H55) Chipset.
Which git repo and which branch exactly? You may have a repo without the
patches that fix interlaced modes.
> After installing and reboot I put the interlaced line to my xorg.conf
> and activate them (first by xorg.conf and after that by lxdm
> resolution set tool).
Which line did you add to xorg.conf? What exactly did you do in this step?
Please try to remove every xorg configuration file and test again with the
default configuration
>
> I only get a screen full of colored stripes after switching from
> progressive to interlaced mode. My TV shows 1080i as input mode.
> After that I read all mode lines from my TV by using the xorg server
> log and tried every interlaced modeline I found but always the same
> striped screen. To get sure that I use correct modelines I checked
> them with an plugged in card from another brand and it works immediately.
Please attach the TV, then run "xrandr --verbose" and send us the output.
Please also send the output of intel_reg_dumper:
http://intellinuxgraphics.org/intel_reg_dumper.html
--
Paulo Zanoni
[-- Attachment #2: intel_reg_dumper.txt --]
[-- Type: text/plain, Size: 11802 bytes --]
PGETBL_CTL: 0x00000008
GEN6_INSTDONE_1: 0xfffffffe
GEN6_INSTDONE_2: 0xffffffff
CPU_VGACNTRL: 0x80000000 (disabled)
DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
RR_HW_CTL: 0x00000000 (low 0, high 0)
FDI_PLL_BIOS_0: 0x082b3019
FDI_PLL_BIOS_1: 0x00000000
FDI_PLL_BIOS_2: 0x00000000
DISPLAY_PORT_PLL_BIOS_0: 0x0807012b
DISPLAY_PORT_PLL_BIOS_1: 0x00000000
DISPLAY_PORT_PLL_BIOS_2: 0x00000000
FDI_PLL_FREQ_CTL: 0x00053687
PIPEACONF: 0xc0000000 (enabled, active, 8bpc)
HTOTAL_A: 0x0897077f (1920 active, 2200 total)
HBLANK_A: 0x0897077f (1920 start, 2200 end)
HSYNC_A: 0x080307d7 (2008 start, 2052 end)
VTOTAL_A: 0x04640437 (1080 active, 1125 total)
VBLANK_A: 0x04640437 (1080 start, 1125 end)
VSYNC_A: 0x0440043b (1084 start, 1089 end)
VSYNCSHIFT_A: 0x00000000
PIPEASRC: 0x077f0437 (1920, 1080)
PIPEA_DATA_M1: 0x7e3661e0 (TU 64, val 0x3661e0 3564000)
PIPEA_DATA_N1: 0x0041eb00 (val 0x41eb00 4320000)
PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
PIPEA_LINK_M1: 0x00024414 (val 0x24414 148500)
PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
DSPACNTR: 0xd8004000 (enabled)
DSPABASE: 0x00000000
DSPASTRIDE: 0x00001e00 (120)
DSPASURF: 0x00043000
DSPATILEOFF: 0x00000000 (0, 0)
PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
HTOTAL_B: 0x031f027f (640 active, 800 total)
HBLANK_B: 0x03170287 (648 start, 792 end)
HSYNC_B: 0x02ef028f (656 start, 752 end)
VTOTAL_B: 0x020c01df (480 active, 525 total)
VBLANK_B: 0x020401e7 (488 start, 517 end)
VSYNC_B: 0x01eb01e9 (490 start, 492 end)
VSYNCSHIFT_B: 0x00000000
DSPBCNTR: 0x00000000 (disabled)
DSPBBASE: 0x00000000
DSPBSTRIDE: 0x00000000 (0)
DSPBSURF: 0x00000000
DSPBTILEOFF: 0x00000000 (0, 0)
PIPEBSRC: 0x027f01df (640, 480)
PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
PFA_CTL_2: 0x00007de4 (vscale 0.983521)
PFA_CTL_3: 0x00003ef2 (vscale initial phase 0.491760)
PFA_CTL_4: 0x00007c40 (hscale 0.970703)
PFA_WIN_POS: 0x00000000 (0, 0)
PFA_WIN_SIZE: 0x00000000 (0, 0)
PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
PFB_CTL_2: 0x00000000 (vscale 0.000000)
PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
PFB_CTL_4: 0x00000000 (hscale 0.000000)
PFB_WIN_POS: 0x00000000 (0, 0)
PFB_WIN_SIZE: 0x00000000 (0, 0)
PCH_DREF_CONTROL: 0x00000400 (cpu source disable, ssc_source disable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)
PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
PCH_DPLL_TMR_CFG: 0x0271186a
PCH_SSC4_PARMS: 0x00000000
PCH_SSC4_AUX_PARMS: 0x00000000
PCH_DPLL_SEL: 0x00000000 (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
PCH_DPLL_ANALOG_CTL: 0x00008000
PCH_DPLL_A: 0xc4020002 (enable, sdvo high speed yes, mode (null), p2 (null), FPA0 P1 2, FPA1 P1 2, refclk default 120Mhz, sdvo/hdmi mul 1)
PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
PCH_FPA0: 0x00021007 (n = 2, m1 = 16, m2 = 7)
PCH_FPA1: 0x00021007 (n = 2, m1 = 16, m2 = 7)
PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
TRANS_HTOTAL_A: 0x0897077f (1920 active, 2200 total)
TRANS_HBLANK_A: 0x0897077f (1920 start, 2200 end)
TRANS_HSYNC_A: 0x080307d7 (2008 start, 2052 end)
TRANS_VTOTAL_A: 0x04640437 (1080 active, 1125 total)
TRANS_VBLANK_A: 0x04640437 (1080 start, 1125 end)
TRANS_VSYNC_A: 0x0440043b (1084 start, 1089 end)
TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
TRANS_HTOTAL_B: 0x031f027f (640 active, 800 total)
TRANS_HBLANK_B: 0x03170287 (648 start, 792 end)
TRANS_HSYNC_B: 0x02ef028f (656 start, 752 end)
TRANS_VTOTAL_B: 0x020c01df (480 active, 525 total)
TRANS_VBLANK_B: 0x020401e7 (488 start, 517 end)
TRANS_VSYNC_B: 0x01eb01e9 (490 start, 492 end)
TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
TRANS_VBLANK_C: 0x00000044 (69 start, 1 end)
TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_N2: 0x00ffffff (val 0xffffff 16777215)
TRANSACONF: 0xc0000000 (enable, active)
TRANSBCONF: 0x00000000 (disable, inactive)
TRANSCCONF: 0x00000000 (disable, inactive)
FDI_TXA_CTL: 0xb00c4000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis none, port width X2, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
FDI_TXB_CTL: 0x00044000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis none, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
FDI_RXA_CTL: 0xb0082050 (enable, train pattern not train, port width X2, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, PCDClk)
FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
FDI_RXC_CTL: 0x00000000 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing disable, RawClk)
FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
FDI_RXC_MISC: 0x00000000 (FDI Delay 0)
FDI_RXA_TUSIZE1: 0x7e000000
FDI_RXA_TUSIZE2: 0x7e000000
FDI_RXB_TUSIZE1: 0x7e000000
FDI_RXB_TUSIZE2: 0x7e000000
FDI_RXC_TUSIZE1: 0x00000000
FDI_RXC_TUSIZE2: 0x00000000
FDI_PLL_CTL_1: 0x33505248
FDI_PLL_CTL_2: 0x00000000
FDI_RXA_IIR: 0x00000000
FDI_RXA_IMR: 0x000000ff
FDI_RXB_IIR: 0x00000000
FDI_RXB_IMR: 0x000000ff
PCH_ADPA: 0x00f40018 (disabled, transcoder A, +hsync, +vsync)
HDMIB: 0x0000089c (disabled pipe A 8bpc TMDS DVI audio disabled +vsync +hsync detected)
HDMIC: 0x8000025c (enabled pipe A 8bpc SDVO HDMI audio enabled +vsync +hsync detected)
HDMID: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
PCH_LVDS: 0x40000000 (disabled, pipe B, 18 bit, 1 channel)
CPU_eDP_A: 0x00000018
PCH_DP_B: 0x0000001c
PCH_DP_C: 0x0000001c
PCH_DP_D: 0x0000001c
TRANS_DP_CTL_A: 0x00000000 (disabled, pipe B, 18 bit, 1 channel)
TRANS_DP_CTL_B: 0x00000000 (disabled, pipe B, 18 bit, 1 channel)
TRANS_DP_CTL_C: 0x00000000 (disabled, pipe B, 18 bit, 1 channel)
BLC_PWM_CPU_CTL2: 0x00000000
BLC_PWM_CPU_CTL: 0x00000000
BLC_PWM_PCH_CTL1: 0x00000000
BLC_PWM_PCH_CTL2: 0x00000000
PCH_PP_STATUS: 0x00000000 (off, not ready, sequencing idle)
PCH_PP_CONTROL: 0xabcd0000 (blacklight disabled, do not power down on reset, panel off)
PCH_PP_ON_DELAYS: 0x00000000
PCH_PP_OFF_DELAYS: 0x00000000
PCH_PP_DIVISOR: 0x00186904
[-- Attachment #3: verbose.txt --]
[-- Type: text/plain, Size: 6717 bytes --]
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
VGA1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x41
Timestamp: 135826
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
HDMI1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x42
Timestamp: 135826
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Full
supported: Full Limited 16:2
audio: auto
supported: off auto on
DP1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x43
Timestamp: 135826
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Full
supported: Full Limited 16:2
audio: auto
supported: off auto on
HDMI2 connected 1920x1080+0+0 (0x48) normal (normal left inverted right x axis y axis) 160mm x 90mm
Identifier: 0x44
Timestamp: 135826
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff004c2dbc0300000000
2f110103801009780aee91a3544c9926
0f50542108008180a940010101010101
010101010101023a801871382d40582c
4500a05a0000001e662150b051001b30
40703600a05a0000001e000000fd0017
3d1a4c17000a202020202020000000fc
0053414d53554e470a202020202001d3
020327f14b901f041305140312202122
2309070783010000e2000fe305030167
030c002000b82d011d007251d01e206e
285500a05a0000001e011d00bc52d01e
20b8285540a05a0000001e011d801871
1c1620582c2500a05a0000009e011d80
d0721c1620102c2580a05a0000009e00
0000000000000000000000000000000d
Broadcast RGB: Full
supported: Full Limited 16:2
audio: auto
supported: off auto on
1920x1080 (0x48) 148.5MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.5KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.0Hz
1920x1080 (0x49) 148.5MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.2KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.0Hz
1920x1080 (0x4a) 74.2MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 33.8KHz
v: height 1080 start 1084 end 1089 total 1125 clock 30.0Hz
1920x1080 (0x4b) 74.2MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 28.1KHz
v: height 1080 start 1084 end 1089 total 1125 clock 25.0Hz
1920x1080 (0x4c) 74.2MHz +HSync +VSync
h: width 1920 start 2558 end 2602 total 2750 skew 0 clock 27.0KHz
v: height 1080 start 1084 end 1089 total 1125 clock 24.0Hz
1600x1200 (0x4d) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1280x1024 (0x4e) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1360x768 (0x4f) 85.5MHz +HSync +VSync
h: width 1360 start 1424 end 1536 total 1792 skew 0 clock 47.7KHz
v: height 768 start 771 end 777 total 795 clock 60.0Hz
1280x720 (0x50) 74.2MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.5KHz
v: height 720 start 725 end 730 total 750 clock 50.0Hz
1280x720 (0x51) 74.2MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.0KHz
v: height 720 start 725 end 730 total 750 clock 60.0Hz
1024x768 (0x52) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x53) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
720x576 (0x54) 27.0MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.2KHz
v: height 576 start 581 end 586 total 625 clock 50.0Hz
720x480 (0x55) 27.0MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.5KHz
v: height 480 start 489 end 495 total 525 clock 59.9Hz
640x480 (0x56) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
HDMI3 disconnected (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 135826
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Full
supported: Full Limited 16:2
audio: auto
supported: off auto on
DP2 disconnected (normal left inverted right x axis y axis)
Identifier: 0x46
Timestamp: 135826
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Full
supported: Full Limited 16:2
audio: auto
supported: off auto on
DP3 disconnected (normal left inverted right x axis y axis)
Identifier: 0x47
Timestamp: 135826
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Full
supported: Full Limited 16:2
audio: auto
supported: off auto on
[-- Attachment #4: xorg.conf --]
[-- Type: application/octet-stream, Size: 1419 bytes --]
Section "ServerFlags"
EndSection
Section "Serverlayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Option "Xinerama" "false"
EndSection
Section "Device"
Identifier "Device0"
Driver "intel"
VendorName "INTEL Corporation"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "HDMI2"
DefaultDepth 24
Option "TwinView" "off"
SubSection "Display"
Depth 24
Modes "1920x1080@50i"
# Modes "1920x1080@50p" "1920x1080@59.94p" "1920x1080@24p" "1920x1080@60p"
EndSubSection
EndSection
Section "Monitor"
Identifier "HDMI2"
HorizSync 26.0 - 76.0
VertRefresh 23.0 - 61.0
Modeline "1920x1080@50i" 74.25 1920 2448 2492 2640 1080 1084 1094 1124 interlace +hsync +vsync
#Modeline "1920x1080@50i" 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync
#Modeline "1920x1080@24p" 74.230 1920 2560 2604 2752 1080 1084 1089 1125 +hsync +vsync
#Modeline "1920x1080@50p" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
#Modeline "1920x1080@59.94p" 148.352 1920 1960 2016 2200 1080 1082 1088 1125 +hsync +vsync
#Modeline "1920x1080@60p" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Extensions"
# fixes tearing
Option "Composite" "Disable"
EndSection
[-- Attachment #5: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2012-02-13 18:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-13 17:06 Interlaced mode on intel Clarkdale only colored stripes Atechsystem
2012-02-13 17:57 ` Paulo Zanoni
2012-02-13 18:44 ` Atechsystem [this message]
2012-02-13 18:54 ` Rodrigo Vivi
[not found] ` <00af01ccea7f$62da4680$288ed380$@freenet.de>
2012-02-13 18:55 ` Paulo Zanoni
2012-02-13 19:05 ` Atechsystem
2012-02-13 20:44 ` WG: " Atechsystem
2012-02-13 22:28 ` Rodrigo Vivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00b901ccea7f$8c920df0$a5b629d0$@freenet.de' \
--to=atechsystem@freenet.de \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.