All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot-Users] help porting u-boot for customized ixdp425 board
@ 2004-12-02 15:23 Ara Avanesyan
  2004-12-02 15:29 ` Wolfgang Denk
  2004-12-02 16:09 ` Jon Loeliger
  0 siblings, 2 replies; 3+ messages in thread
From: Ara Avanesyan @ 2004-12-02 15:23 UTC (permalink / raw)
  To: u-boot

Hi all,

I'm noob in hardware, flashes and I need some help to porting u-boot to our customized ixdp425 hardware.

This hardware contains a small CFI compliant bootable flash for u-boot (512kb) and another one 64 Mb DiskOnChip flash for OS, FS and programs. 

I've read readme and the online manual. I have some basic knowledge about the things and some guesses what to do. However these are only guesses without any confirmation. I do not want go through tries and failures way.

Anybody familiar with those things please give me some advices where to start the porting or whatever might be useful...

Any help is greatly appreciated.

Thanks,
Ara


P.S. 
Btw, the doc/README.ixdp is still missing. Kyle? :)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20041202/70afbc56/attachment.htm 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [U-Boot-Users] help porting u-boot for customized ixdp425 board
  2004-12-02 15:23 [U-Boot-Users] help porting u-boot for customized ixdp425 board Ara Avanesyan
@ 2004-12-02 15:29 ` Wolfgang Denk
  2004-12-02 16:09 ` Jon Loeliger
  1 sibling, 0 replies; 3+ messages in thread
From: Wolfgang Denk @ 2004-12-02 15:29 UTC (permalink / raw)
  To: u-boot

In message <000e01c4d882$dacef1c0$1000000a@araav> you wrote:
> 
> I've read readme and the online manual. I have some basic knowledge
...
> Anybody familiar with those things please give me some advices where to
> start the porting or whatever might be useful...

Additional to what's in the REAME and the DULG? Sorry.  If  you  have
any specific questions, please feel free to ask, but...

> ------=_NextPart_000_000B_01C4D8A4.611838B0
> Content-Type: text/html;
> 	charset="koi8-r"
> Content-Transfer-Encoding: quoted-printable
> 
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

...but please do NOT post HTML!!!

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Memories of you remind me of you.                   - Karl Lehenbauer

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [U-Boot-Users] help porting u-boot for customized ixdp425 board
  2004-12-02 15:23 [U-Boot-Users] help porting u-boot for customized ixdp425 board Ara Avanesyan
  2004-12-02 15:29 ` Wolfgang Denk
@ 2004-12-02 16:09 ` Jon Loeliger
  1 sibling, 0 replies; 3+ messages in thread
From: Jon Loeliger @ 2004-12-02 16:09 UTC (permalink / raw)
  To: u-boot

On Thu, 2004-12-02 at 09:23, Ara Avanesyan wrote:
> Hi all,
>  
> I'm noob in hardware, flashes and I need some help to porting u-boot
> to our customized ixdp425 hardware.
>  
> This hardware contains a small CFI compliant bootable flash for u-boot
> (512kb) and another one 64 Mb DiskOnChip flash for OS, FS and
> programs. 
>  
> I've read readme and the online manual. I have some basic knowledge
> about the things and some guesses what to do. However these are only
> guesses without any confirmation. I do not want go through tries and
> failures way.

Hmmm... So it seems you've done the porting algorithm
fairly religiously so far, maybe even including the
"while (learning)" clause. :-)

Seems you are even anticipating the else clause of the
standard "if (available_money > toLocalCurrency ($2500)" test.
That's good.

> Anybody familiar with those things please give me some advices where
> to start the porting or whatever might be useful...

Many people are familiar with this process.  Some to greater
extent than others, so help us out a bit too.

Let's start with your _actual_ questions.  What are they?

Did you continue through the porting algorithm?  Did you make
your own board directory and files?  Have you built a new
image for it?  Downloaded it?  Do you have a BDI2000 to use?

We're going to need some more details from you here...

> Any help is greatly appreciated.

HTH...

> Thanks,
> Ara

Thanks,
jdl

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2004-12-02 16:09 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-12-02 15:23 [U-Boot-Users] help porting u-boot for customized ixdp425 board Ara Avanesyan
2004-12-02 15:29 ` Wolfgang Denk
2004-12-02 16:09 ` Jon Loeliger

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.