* M-Audio Transit: alsamixer shows 100% and -0.5db at the same time !?
@ 2009-06-08 9:13 Klaus Schulz
2009-06-08 11:39 ` Clemens Ladisch
0 siblings, 1 reply; 3+ messages in thread
From: Klaus Schulz @ 2009-06-08 9:13 UTC (permalink / raw)
To: alsa-devel mailing list
Hi folks.
My M-Audio Transit shows at 100% and 0.5db attentuation in alsamixer at the
same time.
See below printout.
What could be the explanation for this behaviour?
THX
\Klaus
amixer -Dhw:0
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 254
Mono:
Front Left: Playback 254 [100%] [0.50dB] [on]
Front Right: Playback 254 [100%] [0.50dB] [on]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: M-Audio Transit: alsamixer shows 100% and -0.5db at the same time !?
2009-06-08 9:13 M-Audio Transit: alsamixer shows 100% and -0.5db at the same time !? Klaus Schulz
@ 2009-06-08 11:39 ` Clemens Ladisch
2009-06-08 12:05 ` kls.schlz
0 siblings, 1 reply; 3+ messages in thread
From: Clemens Ladisch @ 2009-06-08 11:39 UTC (permalink / raw)
To: Klaus Schulz; +Cc: alsa-devel mailing list
Klaus Schulz wrote:
> My M-Audio Transit shows at 100% and 0.5db attentuation in alsamixer at the
> same time.
"100%" just means that the control has its maximum value.
> See below printout.
This is not a printout of alsamixer.
> Front Left: Playback 254 [100%] [0.50dB] [on]
> Front Right: Playback 254 [100%] [0.50dB] [on]
I can see neither "-0.5dB" nor "0.5dB attenuation" in there; it's 0.5 dB
gain. (If you actually run alsamixer, it gets labeled with "gain".)
Best regards,
Clemens
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: M-Audio Transit: alsamixer shows 100% and -0.5db at the same time !?
2009-06-08 11:39 ` Clemens Ladisch
@ 2009-06-08 12:05 ` kls.schlz
0 siblings, 0 replies; 3+ messages in thread
From: kls.schlz @ 2009-06-08 12:05 UTC (permalink / raw)
To: Clemens Ladisch, Klaus Schulz; +Cc: alsa-devel mailing list
Hi Clemens.
BTW: I sent you corrections to sourceforge related to madfuload
installation/udev setup/new driver for the transit some days ago. I am
wondering if you still maintain the package.
See below comments:
On Jun 8, 2009 1:39pm, Clemens Ladisch <clemens@ladisch.de> wrote:
> Klaus Schulz wrote:
> > My M-Audio Transit shows at 100% and 0.5db attentuation in alsamixer at
> the
> > same time.
> "100%" just means that the control has its maximum value.
Hmmh. I understand that. But how do I get around this? My goal would be to
run the mixer at 0db.
> > See below printout.
> This is not a printout of alsamixer.
Sorry. Below is an amixer output. Alsamixer says: gain -0.5
> > Front Left: Playback 254 [100%] [0.50dB] [on]
> > Front Right: Playback 254 [100%] [0.50dB] [on]
> I can see neither "-0.5dB" nor "0.5dB attenuation" in there; it's 0.5 dB
> gain. (If you actually run alsamixer, it gets labeled with "gain".)
> Best regards,
> Clemens
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-06-08 12:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-06-08 9:13 M-Audio Transit: alsamixer shows 100% and -0.5db at the same time !? Klaus Schulz
2009-06-08 11:39 ` Clemens Ladisch
2009-06-08 12:05 ` kls.schlz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.