From: "Kyle Unice" <unixe@comcast.net>
To: <linux-mips@linux-mips.org>
Subject: Au1550 Serial port - linux-2.6.13.2
Date: Mon, 3 Oct 2005 18:00:30 -0600 [thread overview]
Message-ID: <000f01c5c876$a2b78740$0400a8c0@buzz> (raw)
I have configured linux-2.6.13.2 for a db1550_defconfig build. When I
compile it, I get this error when compiling au1x00_uart.c:
LD usr/built-in.o
HOSTCC drivers/pci/gen-devlist
DEVLIST drivers/pci/devlist.h
CC drivers/pci/names.o
In file included from include/linux/mm.h:36,
from include/asm/pci.h:10,
from include/linux/pci.h:919,
from drivers/pci/names.c:11:
include/asm/pgtable.h: In function `io_remap_pfn_range':
include/asm/pgtable.h:377: warning: unused variable `phys_addr_high'
LD drivers/pci/built-in.o
CC drivers/serial/au1x00_uart.o
drivers/serial/au1x00_uart.c:72: error: `AU1000_UART0_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:72: error: initializer element is not constant
drivers/serial/au1x00_uart.c:72: error: (near initialization for
`old_serial_por
t[0].irq')
drivers/serial/au1x00_uart.c:75: error: initializer element is not constant
drivers/serial/au1x00_uart.c:75: error: (near initialization for
`old_serial_por
t[0]')
drivers/serial/au1x00_uart.c:78: error: `AU1000_UART1_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:78: error: initializer element is not constant
drivers/serial/au1x00_uart.c:78: error: (near initialization for
`old_serial_por
t[1].irq')
drivers/serial/au1x00_uart.c:81: error: initializer element is not constant
drivers/serial/au1x00_uart.c:81: error: (near initialization for
`old_serial_por
t[1]')
drivers/serial/au1x00_uart.c:84: error: `UART2_ADDR' undeclared here (not in
a f
unction)
drivers/serial/au1x00_uart.c:84: error: initializer element is not constant
drivers/serial/au1x00_uart.c:84: error: (near initialization for
`old_serial_por
t[2].iomem_base')
drivers/serial/au1x00_uart.c:85: error: `AU1000_UART2_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:85: error: initializer element is not constant
drivers/serial/au1x00_uart.c:85: error: (near initialization for
`old_serial_por
t[2].irq')
drivers/serial/au1x00_uart.c:88: error: initializer element is not constant
drivers/serial/au1x00_uart.c:88: error: (near initialization for
`old_serial_por
t[2]')
drivers/serial/au1x00_uart.c:92: error: `AU1000_UART3_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:92: error: initializer element is not constant
drivers/serial/au1x00_uart.c:92: error: (near initialization for
`old_serial_por
t[3].irq')
drivers/serial/au1x00_uart.c:95: error: initializer element is not constant
drivers/serial/au1x00_uart.c:95: error: (near initialization for
`old_serial_por
t[3]')
make[2]: *** [drivers/serial/au1x00_uart.o] Error 1
make[1]: *** [drivers/serial] Error 2
make: *** [drivers] Error 2
Kyle@buzz /usr/src/linux-2.6.13.2
$
WARNING: multiple messages have this Message-ID (diff)
From: "Kyle Unice" <unixe@comcast.net>
To: linux-mips@linux-mips.org
Subject: Au1550 Serial port - linux-2.6.13.2
Date: Mon, 3 Oct 2005 18:00:30 -0600 [thread overview]
Message-ID: <000f01c5c876$a2b78740$0400a8c0@buzz> (raw)
Message-ID: <20051004000030.7Kt_MfpgIipTJQOc_k1BUv3sGMbRWXGDpdH4KgglHQ0@z> (raw)
I have configured linux-2.6.13.2 for a db1550_defconfig build. When I
compile it, I get this error when compiling au1x00_uart.c:
LD usr/built-in.o
HOSTCC drivers/pci/gen-devlist
DEVLIST drivers/pci/devlist.h
CC drivers/pci/names.o
In file included from include/linux/mm.h:36,
from include/asm/pci.h:10,
from include/linux/pci.h:919,
from drivers/pci/names.c:11:
include/asm/pgtable.h: In function `io_remap_pfn_range':
include/asm/pgtable.h:377: warning: unused variable `phys_addr_high'
LD drivers/pci/built-in.o
CC drivers/serial/au1x00_uart.o
drivers/serial/au1x00_uart.c:72: error: `AU1000_UART0_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:72: error: initializer element is not constant
drivers/serial/au1x00_uart.c:72: error: (near initialization for
`old_serial_por
t[0].irq')
drivers/serial/au1x00_uart.c:75: error: initializer element is not constant
drivers/serial/au1x00_uart.c:75: error: (near initialization for
`old_serial_por
t[0]')
drivers/serial/au1x00_uart.c:78: error: `AU1000_UART1_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:78: error: initializer element is not constant
drivers/serial/au1x00_uart.c:78: error: (near initialization for
`old_serial_por
t[1].irq')
drivers/serial/au1x00_uart.c:81: error: initializer element is not constant
drivers/serial/au1x00_uart.c:81: error: (near initialization for
`old_serial_por
t[1]')
drivers/serial/au1x00_uart.c:84: error: `UART2_ADDR' undeclared here (not in
a f
unction)
drivers/serial/au1x00_uart.c:84: error: initializer element is not constant
drivers/serial/au1x00_uart.c:84: error: (near initialization for
`old_serial_por
t[2].iomem_base')
drivers/serial/au1x00_uart.c:85: error: `AU1000_UART2_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:85: error: initializer element is not constant
drivers/serial/au1x00_uart.c:85: error: (near initialization for
`old_serial_por
t[2].irq')
drivers/serial/au1x00_uart.c:88: error: initializer element is not constant
drivers/serial/au1x00_uart.c:88: error: (near initialization for
`old_serial_por
t[2]')
drivers/serial/au1x00_uart.c:92: error: `AU1000_UART3_INT' undeclared here
(not
in a function)
drivers/serial/au1x00_uart.c:92: error: initializer element is not constant
drivers/serial/au1x00_uart.c:92: error: (near initialization for
`old_serial_por
t[3].irq')
drivers/serial/au1x00_uart.c:95: error: initializer element is not constant
drivers/serial/au1x00_uart.c:95: error: (near initialization for
`old_serial_por
t[3]')
make[2]: *** [drivers/serial/au1x00_uart.o] Error 1
make[1]: *** [drivers/serial] Error 2
make: *** [drivers] Error 2
Kyle@buzz /usr/src/linux-2.6.13.2
$
next reply other threads:[~2005-10-04 0:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-04 0:00 Kyle Unice [this message]
2005-10-04 0:00 ` Au1550 Serial port - linux-2.6.13.2 Kyle Unice
2005-10-04 0:43 ` Dan Malek
2005-10-04 0:43 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000f01c5c876$a2b78740$0400a8c0@buzz' \
--to=unixe@comcast.net \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.