From: Jingoo Han <jg1.han@samsung.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] Generic PHY driver for the Exynos SoC DP PHY
Date: Fri, 28 Jun 2013 05:21:15 +0000 [thread overview]
Message-ID: <001401ce73bf$4f9a67b0$eecf3710$@samsung.com> (raw)
This patch series adds a simple driver for the Samsung Exynos SoC
series DP transmitter PHY, using the generic PHY framework [1].
Previously the DP PHY used a platform callback or internal DT node
to control the PHY power enable bit.
The platform callback and internal DT node can be dropped and this
driver does not need any calls back to the platform code.
This series depends on the generic PHY framework [1]. These patches
refer to Sylwester Nawrocki's patches about Exynos MIPI [2].
[1] https://lkml.org/lkml/2013/6/26/259
[2] http://www.spinics.net/lists/linux-samsung-soc/msg20034.html
Jingoo Han (3):
phy: Add driver for Exynos DP PHY
ARM: dts: Add DP PHY node to exynos5250.dtsi
video: exynos_dp: Use the generic PHY driver
.../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++
.../devicetree/bindings/video/exynos_dp.txt | 17 ---
arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
drivers/phy/Kconfig | 8 ++
drivers/phy/Makefile | 3 +-
drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++
drivers/video/exynos/exynos_dp_core.c | 118 ++------------------
drivers/video/exynos/exynos_dp_core.h | 2 +
include/video/exynos_dp.h | 6 +-
9 files changed, 170 insertions(+), 134 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt
create mode 100644 drivers/phy/phy-exynos-dp-video.c
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: Jingoo Han <jg1.han@samsung.com>
To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
linux-media@vger.kernel.org, Kukjin Kim <kgene.kim@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Felipe Balbi <balbi@ti.com>, Tomasz Figa <t.figa@samsung.com>,
devicetree-discuss@lists.ozlabs.org,
'Inki Dae' <inki.dae@samsung.com>,
'Donghwa Lee' <dh09.lee@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
linux-fbdev@vger.kernel.org, Jingoo Han <jg1.han@samsung.com>
Subject: [PATCH 0/3] Generic PHY driver for the Exynos SoC DP PHY
Date: Fri, 28 Jun 2013 14:21:15 +0900 [thread overview]
Message-ID: <001401ce73bf$4f9a67b0$eecf3710$@samsung.com> (raw)
This patch series adds a simple driver for the Samsung Exynos SoC
series DP transmitter PHY, using the generic PHY framework [1].
Previously the DP PHY used a platform callback or internal DT node
to control the PHY power enable bit.
The platform callback and internal DT node can be dropped and this
driver does not need any calls back to the platform code.
This series depends on the generic PHY framework [1]. These patches
refer to Sylwester Nawrocki's patches about Exynos MIPI [2].
[1] https://lkml.org/lkml/2013/6/26/259
[2] http://www.spinics.net/lists/linux-samsung-soc/msg20034.html
Jingoo Han (3):
phy: Add driver for Exynos DP PHY
ARM: dts: Add DP PHY node to exynos5250.dtsi
video: exynos_dp: Use the generic PHY driver
.../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++
.../devicetree/bindings/video/exynos_dp.txt | 17 ---
arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
drivers/phy/Kconfig | 8 ++
drivers/phy/Makefile | 3 +-
drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++
drivers/video/exynos/exynos_dp_core.c | 118 ++------------------
drivers/video/exynos/exynos_dp_core.h | 2 +
include/video/exynos_dp.h | 6 +-
9 files changed, 170 insertions(+), 134 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt
create mode 100644 drivers/phy/phy-exynos-dp-video.c
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: jg1.han@samsung.com (Jingoo Han)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] Generic PHY driver for the Exynos SoC DP PHY
Date: Fri, 28 Jun 2013 14:21:15 +0900 [thread overview]
Message-ID: <001401ce73bf$4f9a67b0$eecf3710$@samsung.com> (raw)
This patch series adds a simple driver for the Samsung Exynos SoC
series DP transmitter PHY, using the generic PHY framework [1].
Previously the DP PHY used a platform callback or internal DT node
to control the PHY power enable bit.
The platform callback and internal DT node can be dropped and this
driver does not need any calls back to the platform code.
This series depends on the generic PHY framework [1]. These patches
refer to Sylwester Nawrocki's patches about Exynos MIPI [2].
[1] https://lkml.org/lkml/2013/6/26/259
[2] http://www.spinics.net/lists/linux-samsung-soc/msg20034.html
Jingoo Han (3):
phy: Add driver for Exynos DP PHY
ARM: dts: Add DP PHY node to exynos5250.dtsi
video: exynos_dp: Use the generic PHY driver
.../phy/samsung,exynos5250-dp-video-phy.txt | 7 ++
.../devicetree/bindings/video/exynos_dp.txt | 17 ---
arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
drivers/phy/Kconfig | 8 ++
drivers/phy/Makefile | 3 +-
drivers/phy/phy-exynos-dp-video.c | 130 ++++++++++++++++++++
drivers/video/exynos/exynos_dp_core.c | 118 ++------------------
drivers/video/exynos/exynos_dp_core.h | 2 +
include/video/exynos_dp.h | 6 +-
9 files changed, 170 insertions(+), 134 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/samsung,exynos5250-dp-video-phy.txt
create mode 100644 drivers/phy/phy-exynos-dp-video.c
--
1.7.10.4
next reply other threads:[~2013-06-28 5:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-28 5:21 Jingoo Han [this message]
2013-06-28 5:21 ` [PATCH 0/3] Generic PHY driver for the Exynos SoC DP PHY Jingoo Han
2013-06-28 5:21 ` Jingoo Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001401ce73bf$4f9a67b0$eecf3710$@samsung.com' \
--to=jg1.han@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.