All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jingoo Han <jg1.han@samsung.com>
To: 'Tomasz Figa' <t.figa@samsung.com>, linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	'Kukjin Kim' <kgene.kim@samsung.com>,
	devicetree-discuss@lists.ozlabs.org,
	'Felipe Balbi' <balbi@ti.com>,
	'Grant Likely' <grant.likely@linaro.org>,
	'Greg Kroah-Hartman' <gregkh@linuxfoundation.org>,
	'Linus Walleij' <linus.walleij@linaro.org>,
	linux-usb@vger.kernel.org,
	'Rob Herring' <rob.herring@calxeda.com>,
	'Sylwester Nawrocki' <s.nawrocki@samsung.com>,
	'Thomas Abraham' <thomas.abraham@linaro.org>,
	m.szyprowski@samsung.com, l.majewski@samsung.com,
	'Kyungmin Park' <kyungmin.park@samsung.com>,
	Jingoo Han <jg1.han@samsung.com>
Subject: Re: [PATCH 3/4] ARM: dts: exynos4: Add nodes for USB PHY block
Date: Wed, 26 Jun 2013 16:29:27 +0900	[thread overview]
Message-ID: <001601ce723e$e3f20170$abd60450$@samsung.com> (raw)
In-Reply-To: <1372174706-5459-4-git-send-email-t.figa@samsung.com>

On Wednesday, June 26, 2013 12:38 AM, Tomasz Figa wrote:
> 
> This patch adds device tree nodes for USB OTG PHYs of Exynos4210 and
> Exynos4x12 SoCs.
> 
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

It looks good.

Reviewed-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han


> ---
>  arch/arm/boot/dts/exynos4210.dtsi | 15 +++++++++++++++
>  arch/arm/boot/dts/exynos4x12.dtsi | 15 +++++++++++++++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index 54710de..3c71ea5 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -114,6 +114,21 @@
>  		interrupts = <2 4>;
>  	};
> 
> +	usbphy@125B0000 {
> +		compatible = "samsung,exynos4210-usb2phy";
> +		reg = <0x125B0000 0x100>;
> +		clocks = <&clock 305>;
> +		clock-names = "otg";
> +		status = "disabled";
> +		ranges;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		usbphy-sys {
> +			reg = <0x10020704 0x8>;
> +		};
> +	};
> +
>  	g2d@12800000 {
>  		compatible = "samsung,s5pv210-g2d";
>  		reg = <0x12800000 0x1000>;
> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
> index e3380a7..267ed95 100644
> --- a/arch/arm/boot/dts/exynos4x12.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
> @@ -79,4 +79,19 @@
>  		interrupts = <0 89 0>;
>  		status = "disabled";
>  	};
> +
> +	usbphy@125B0000 {
> +		compatible = "samsung,exynos4x12-usb2phy";
> +		reg = <0x125B0000 0x100>;
> +		clocks = <&clock 305>;
> +		clock-names = "otg";
> +		status = "disabled";
> +		ranges;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		usbphy-sys {
> +			reg = <0x10020704 0x8>;
> +		};
> +	};
>  };
> --
> 1.8.2.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: jg1.han@samsung.com (Jingoo Han)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dts: exynos4: Add nodes for USB PHY block
Date: Wed, 26 Jun 2013 16:29:27 +0900	[thread overview]
Message-ID: <001601ce723e$e3f20170$abd60450$@samsung.com> (raw)
In-Reply-To: <1372174706-5459-4-git-send-email-t.figa@samsung.com>

On Wednesday, June 26, 2013 12:38 AM, Tomasz Figa wrote:
> 
> This patch adds device tree nodes for USB OTG PHYs of Exynos4210 and
> Exynos4x12 SoCs.
> 
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

It looks good.

Reviewed-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han


> ---
>  arch/arm/boot/dts/exynos4210.dtsi | 15 +++++++++++++++
>  arch/arm/boot/dts/exynos4x12.dtsi | 15 +++++++++++++++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index 54710de..3c71ea5 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -114,6 +114,21 @@
>  		interrupts = <2 4>;
>  	};
> 
> +	usbphy at 125B0000 {
> +		compatible = "samsung,exynos4210-usb2phy";
> +		reg = <0x125B0000 0x100>;
> +		clocks = <&clock 305>;
> +		clock-names = "otg";
> +		status = "disabled";
> +		ranges;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		usbphy-sys {
> +			reg = <0x10020704 0x8>;
> +		};
> +	};
> +
>  	g2d at 12800000 {
>  		compatible = "samsung,s5pv210-g2d";
>  		reg = <0x12800000 0x1000>;
> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
> index e3380a7..267ed95 100644
> --- a/arch/arm/boot/dts/exynos4x12.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
> @@ -79,4 +79,19 @@
>  		interrupts = <0 89 0>;
>  		status = "disabled";
>  	};
> +
> +	usbphy at 125B0000 {
> +		compatible = "samsung,exynos4x12-usb2phy";
> +		reg = <0x125B0000 0x100>;
> +		clocks = <&clock 305>;
> +		clock-names = "otg";
> +		status = "disabled";
> +		ranges;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		usbphy-sys {
> +			reg = <0x10020704 0x8>;
> +		};
> +	};
>  };
> --
> 1.8.2.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2013-06-26  7:29 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-25 15:38 [PATCH 0/4] Add support for Samsung HSOTG on DT-enabled platforms Tomasz Figa
2013-06-25 15:38 ` Tomasz Figa
2013-06-25 15:38 ` [PATCH 3/4] ARM: dts: exynos4: Add nodes for USB PHY block Tomasz Figa
2013-06-25 15:38   ` Tomasz Figa
2013-06-26  7:29   ` Jingoo Han [this message]
2013-06-26  7:29     ` Jingoo Han
     [not found] ` <1372174706-5459-1-git-send-email-t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-06-25 15:38   ` [PATCH 1/4] usb: gadget: s3c-hsotg: Allow driver instantiation using device tree Tomasz Figa
2013-06-25 15:38     ` Tomasz Figa
2013-06-25 20:46     ` Felipe Balbi
2013-06-25 20:46       ` Felipe Balbi
     [not found]       ` <20130625204632.GB9748-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2013-06-25 20:57         ` Tomasz Figa
2013-06-25 20:57           ` Tomasz Figa
2013-06-25 21:00           ` Felipe Balbi
2013-06-25 21:00             ` Felipe Balbi
2013-06-25 21:05             ` Tomasz Figa
2013-06-25 21:05               ` Tomasz Figa
2013-07-08  7:41     ` Felipe Balbi
2013-07-08  7:41       ` Felipe Balbi
2013-06-25 15:38   ` [PATCH 2/4] ARM: dts: exynos4: Add node for hsotg Tomasz Figa
2013-06-25 15:38     ` Tomasz Figa
2013-06-26  7:26     ` Jingoo Han
2013-06-26  7:26       ` Jingoo Han
2013-06-25 15:38   ` [PATCH 4/4] ARM: dts: exynos4210-trats: Enable USB gadget functionality Tomasz Figa
2013-06-25 15:38     ` Tomasz Figa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='001601ce723e$e3f20170$abd60450$@samsung.com' \
    --to=jg1.han@samsung.com \
    --cc=balbi@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@linaro.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kgene.kim@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=l.majewski@samsung.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=rob.herring@calxeda.com \
    --cc=s.nawrocki@samsung.com \
    --cc=t.figa@samsung.com \
    --cc=thomas.abraham@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.