* xhci: unratelimited "buffer overrun event" warning floods log (~7000/s) with USB S/PDIF capture device
@ 2026-11-21 6:58 Alex Kononov
0 siblings, 0 replies; only message in thread
From: Alex Kononov @ 2026-11-21 6:58 UTC (permalink / raw)
To: 'Mathias Nyman'; +Cc: linux-usb, 'Takashi Iwai', linux-sound
Good day Mathias,
With a USB S/PDIF TX/RX adapter (Savitech, 262a:9123, UAC2, high speed), the
xHCI driver logs an isochronous buffer overrun warning for nearly
every microframe while the adapter's S/PDIF input has no signal:
xhci_hcd 0000:00:14.0: WARN: buffer overrun event for slot 2 ep 4 on
endpoint
Rate measured: ~433,000 messages per minute (~7,200/s). systemd-journald
sits at 100% of one core and reports "Missed N kernel messages".
Setup:
- Intel N100 (PCH xHCI 0000:00:14.0), Debian 13
- Kernel: 6.12.117+deb13-amd64 (same code in mainline 7.4-rc3)
- Capture stream open continuously (CamillaDSP), 48 kHz S16_LE,
EP 0x82 IN isochronous, adaptive, 125 us interval
- TV feeding the S/PDIF input goes idle -> no input signal -> flood.
With a valid input signal the count is 0.
The device is clearly misbehaving (it sends more data than requested when
the S/PDIF receiver is unlocked; it also reports its clock source
as valid while unlocked). The driver handles the events correctly and audio
recovers fine. The problem is only the logging: the warning in
handle_tx_event() for COMP_ISOCH_BUFFER_OVERRUN is not rate-limited, so a
single misbehaving isoc device can generate thousands of lines per second.
Locally I changed that xhci_warn() to dev_warn_ratelimited() and the rate
dropped to ~100/min with no functional change.
Would a patch rate-limiting this message (or demoting it to xhci_dbg) be
acceptable?
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ handle_tx_event()
case COMP_ISOCH_BUFFER_OVERRUN:
- xhci_warn(xhci,
- "WARN: buffer overrun event for slot %u ep %u on
endpoint",
- slot_id, ep_index);
+ dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller,
+ "WARN: buffer overrun event for slot %u
ep %u on endpoint\n",
+ slot_id, ep_index);
break;
or
case COMP_ISOCH_BUFFER_OVERRUN:
- xhci_warn(xhci,
- "WARN: buffer overrun event for slot %u ep %u on
endpoint",
- slot_id, ep_index);
+ xhci_dbg(xhci, "Buffer overrun event for slot %u ep %u\n",
+ slot_id, ep_index);
break;
Endpoint descriptor:
Endpoint 0x82 (capture), from lsusb -v:
altset 1 (S16_LE): Isochronous, Adaptive, wMaxPacketSize 104, bInterval 1
altset 2 (S24_3LE): Isochronous, Adaptive, wMaxPacketSize 156, bInterval 1
/proc/asound/card0/stream0 while flooding:
Capture: Status: Running, Interface 3, Altset 1,
Packet Size = 36, Momentary freq = 48000 Hz
Thank you,
Alex.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-21 6:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-21 6:58 xhci: unratelimited "buffer overrun event" warning floods log (~7000/s) with USB S/PDIF capture device Alex Kononov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.