WARNING: unexpected IO-APIC, please mail to

["Trevor Lee" <trevor@staff.highway1.com.au>]

trevor@crown:~$ dmesg
Linux version 2.2.20 (root@crown) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #3 SMP Sun Apr 7 15:21:39 WST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 3fef0000 @ 00100000 (usable)
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: VIA      Product ID: VT3075       APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 996547 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 1036416k/1048512k available (1008k kernel code, 420k reserved, 10608k data, 60k init)
Dentry hash table entries: 131072 (order 8, 1024k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 262144 (order 8, 1024k)
256K L2 cache (8 way)
CPU: L2 Cache: 256K
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
per-CPU timeslice cutoff: 50.01 usecs.
CPU0: Intel Pentium III (Coppermine) stepping 0a
calibrating APIC timer ...
..... CPU clock speed is 996.4901 MHz.
..... system bus clock speed is 132.8652 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 1992.29 BogoMIPS
Intel machine check reporting enabled on CPU#1.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
OK.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3978.03 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................


IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : IO APIC version: 0011
 WARNING: unexpected IO-APIC, please mail
          to linux-smp@vger.kernel.org
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 0FF 0F  1    0    0   0   0    1    1    59
 02 0FF 0F  0    0    0   0   0    1    1    51
 03 0FF 0F  1    0    0   0   0    1    1    61
 04 0FF 0F  1    0    0   0   0    1    1    69
 05 0FF 0F  1    0    0   0   0    1    1    71
 06 0FF 0F  1    0    0   0   0    1    1    79
 07 0FF 0F  1    0    0   0   0    1    1    81
 08 0FF 0F  1    0    0   0   0    1    1    89
 09 0FF 0F  1    0    0   0   0    1    1    91
 0a 0FF 0F  1    1    0   1   0    1    1    99
 0b 0FF 0F  1    1    0   1   0    1    1    A1
 0c 0FF 0F  1    1    0   1   0    1    1    A9
 0d 000 00  1    0    0   0   0    0    0    00
 0e 0FF 0F  1    0    0   0   0    1    1    B1
 0f 0FF 0F  1    0    0   0   0    1    1    B9
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:

IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfdb01
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ST340016A, 38166MB w/2048kB Cache, CHS=4865/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html
eth0: 3Com 3cSOHO100-TX Hurricane at 0xd400,  00:04:76:d2:70:92, IRQ 12
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 786d.
  Enabling bus-master transmits and whole-frame receives.
Partition check:
 hda: hda1 hda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 979924k swap-space (priority -1)
eth0: Initial media type Autonegotiate.
eth0: MII #24 status 786d, link partner capability 41e1, setting full-duplex.