From: Craig Anderson <craiga@unminc.com>
To: linux-smp@vger.kernel.org
Subject: WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org
Date: Thu, 21 Nov 2002 18:49:58 -0800 [thread overview]
Message-ID: <3DDD9B56.6C3B5DFB@unminc.com> (raw)
Hello Kernel Gods,
I have a riddle for you all. I have a 2-processor machine that
thinks
it has 4 processors but looks to be using only 1 (I only get 1
processors
worth of performance out of it). Here is the messages file entries.
Included is the following message:
WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org
This is a straight-from-the-CD RedHat 7.2 system. Following the
messages file output is some output from the dmesg command.
Any and all suggestions would be GREATLY appreciated,
Craig Anderson
408-327-1328 (office)
Nov 21 16:49:15 s4 syslogd 1.4.1: restart.
Nov 21 16:49:15 s4 syslog: syslogd startup succeeded
Nov 21 16:49:15 s4 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 21 16:49:15 s4 kernel: Inspecting /boot/System.map-2.4.7-10smp
Nov 21 16:49:15 s4 syslog: klogd startup succeeded
Nov 21 16:49:15 s4 kernel: Loaded 15627 symbols from
/boot/System.map-2.4.7-10smp.
Nov 21 16:49:15 s4 kernel: Symbols match kernel version 2.4.7.
Nov 21 16:49:15 s4 kernel: Loaded 180 symbols from 5 modules.
Nov 21 16:49:15 s4 kernel: Linux version 2.4.7-10smp
(bhcompile@stripples.devel.redhat.com) (gcc version 2.96 20000731 (Red
Hat Linux 7.1 2.96-98)) #1 SMP Thu Sep 6 17:09:31 EDT 2001
Nov 21 16:49:15 s4 kernel: BIOS-provided physical RAM map:
Nov 21 16:49:15 s4 kernel: BIOS-e820: 0000000000000000 -
000000000009f800 (usable)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 000000000009f800 -
00000000000a0000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000000d8000 -
00000000000e0000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000000e4000 -
0000000000100000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 0000000000100000 -
00000000f7ef0000 (usable)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7ef0000 -
00000000f7efc000 (ACPI data)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7efc000 -
00000000f7f00000 (ACPI NVS)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7f00000 -
00000000f7f80000 (usable)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7f80000 -
00000000f8000000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000fec00000 -
00000000fec10000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000ff800000 -
00000000ffc00000 (reserved)
Nov 21 16:49:15 s4 portmap: portmap startup succeeded
Nov 21 16:49:16 s4 kernel: BIOS-e820: 00000000fff00000 -
0000000100000000 (reserved)
Nov 21 16:49:16 s4 kernel: Scanning bios EBDA for MXT signature
Nov 21 16:49:16 s4 kernel: 3071MB HIGHMEM available.
Nov 21 16:49:16 s4 kernel: found SMP MP-table at 000f6710
Nov 21 16:49:16 s4 kernel: hm, page 000f6000 reserved twice.
Nov 21 16:49:16 s4 kernel: hm, page 000f7000 reserved twice.
Nov 21 16:49:16 s4 kernel: hm, page 0009f000 reserved twice.
Nov 21 16:49:16 s4 kernel: hm, page 000a0000 reserved twice.
Nov 21 16:49:16 s4 kernel: On node 0 totalpages: 1015680
Nov 21 16:49:16 s4 kernel: zone(0): 4096 pages.
Nov 21 16:49:16 s4 kernel: zone(1): 225280 pages.
Nov 21 16:49:16 s4 kernel: zone(2): 786304 pages.
Nov 21 16:49:16 s4 kernel: Intel MultiProcessor Specification v1.4
Nov 21 16:49:16 s4 kernel: Virtual Wire compatibility mode.
Nov 21 16:49:16 s4 kernel: OEM ID: Product ID: Kings Canyon APIC at:
0xFEE00000
Nov 21 16:49:16 s4 kernel: Processor #0 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: Processor #6 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: Processor #1 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: Processor #7 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: I/O APIC #2 Version 32 at 0xFEC00000.
Nov 21 16:49:16 s4 kernel: I/O APIC #3 Version 32 at 0xFEC80000.
Nov 21 16:49:16 s4 kernel: I/O APIC #4 Version 32 at 0xFEC80400.
Nov 21 16:49:16 s4 kernel: I/O APIC #5 Version 32 at 0xFEC81000.
Nov 21 16:49:16 s4 rpc.statd[716]: Version 0.3.1 Starting
Nov 21 16:49:16 s4 kernel: I/O APIC #8 Version 32 at 0xFEC81400.
Nov 21 16:49:16 s4 nfslock: rpc.statd startup succeeded
Nov 21 16:49:16 s4 kernel: Processors: 4
Nov 21 16:49:16 s4 kernel: Kernel command line: ro root=/dev/hda1
Nov 21 16:49:16 s4 kernel: Initializing CPU#0
Nov 21 16:49:16 s4 kernel: Detected 798.659 MHz processor.
Nov 21 16:49:16 s4 kernel: Console: colour VGA+ 80x25
Nov 21 16:49:16 s4 kernel: Calibrating delay loop... 1592.52 BogoMIPS
Nov 21 16:49:17 s4 kernel: Memory: 3989736k/4062720k available (1396k
kernel code, 70484k reserved, 102k data, 240k init, 3145152k highmem)
Nov 21 16:49:17 s4 kernel: Dentry-cache hash table entries: 524288
(order: 10, 4194304 bytes)
Nov 21 16:49:17 s4 kernel: Inode-cache hash table entries: 262144
(order: 9, 2097152 bytes)
Nov 21 16:49:17 s4 kernel: Mount-cache hash table entries: 65536 (order:
7, 524288 bytes)
Nov 21 16:49:17 s4 kernel: Buffer-cache hash table entries: 262144
(order: 8, 1048576 bytes)
Nov 21 16:49:17 s4 kernel: Page-cache hash table entries: 524288 (order:
10, 4194304 bytes)
Nov 21 16:49:17 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:49:17 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:17 s4 kernel: Intel machine check architecture supported.
Nov 21 16:49:17 s4 keytable: Loading keymap: succeeded
Nov 21 16:49:17 s4 kernel: Intel machine check reporting enabled on
CPU#0.
Nov 21 16:49:17 s4 kernel: Enabling fast FPU save and restore... done.
Nov 21 16:49:17 s4 kernel: Enabling unmasked SIMD FPU exception
support... done.Nov 21 16:49:17 s4 kernel: Checking 'hlt' instruction...
OK.
Nov 21 16:49:17 s4 kernel: POSIX conformance testing by UNIFIX
Nov 21 16:49:17 s4 kernel: mtrr: v1.40 (20010327) Richard Gooch
(rgooch@atnf.csiro.au)
Nov 21 16:48:41 s4 rc.sysinit: Mounting proc filesystem: succeeded
Nov 21 16:49:17 s4 kernel: mtrr: detected mtrr type: Intel
Nov 21 16:49:17 s4 keytable: Loading system font: succeeded
Nov 21 16:48:41 s4 rc.sysinit: Unmounting initrd: succeeded
Nov 21 16:48:41 s4 sysctl: net.ipv4.ip_forward = 0
Nov 21 16:48:41 s4 sysctl: net.ipv4.conf.default.rp_filter = 1
Nov 21 16:48:41 s4 sysctl: kernel.sysrq = 0
Nov 21 16:49:17 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:48:41 s4 rc.sysinit: Configuring kernel parameters: succeeded
Nov 21 16:49:17 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:48:41 s4 date: Thu Nov 21 16:48:34 PST 2002
Nov 21 16:49:17 s4 kernel: Intel machine check reporting enabled on
CPU#0.
Nov 21 16:48:41 s4 rc.sysinit: Setting clock (localtime): Thu Nov 21
16:48:34 PST 2002 succeeded
Nov 21 16:48:41 s4 rc.sysinit: Loading default keymap succeeded
Nov 21 16:48:41 s4 rc.sysinit: Setting default font (lat0-sun16):
succeeded
Nov 21 16:48:41 s4 rc.sysinit: Activating swap partitions: succeeded
Nov 21 16:49:17 s4 kernel: CPU0: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:48:41 s4 rc.sysinit: Setting hostname s4: succeeded
Nov 21 16:49:17 s4 kernel: per-CPU timeslice cutoff: 1462.29 usecs.
Nov 21 16:48:41 s4 rc.sysinit: Mounting USB filesystem: succeeded
Nov 21 16:49:17 s4 random: Initializing random number generator:
succeeded
Nov 21 16:49:17 s4 kernel: enabled ExtINT on CPU#0
Nov 21 16:48:41 s4 rc.sysinit: Initializing USB controller (usb-uhci):
succeeded
Nov 21 16:48:41 s4 fsck: /: clean, 74844/640000 files, 310391/1279167
blocks
Nov 21 16:49:18 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:48:41 s4 rc.sysinit: Checking root filesystem succeeded
Nov 21 16:49:18 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:48:41 s4 rc.sysinit: Remounting root filesystem in read-write
mode: succeeded
Nov 21 16:49:18 s4 kernel: Booting processor 1/1 eip 2000
Nov 21 16:48:53 s4 rc.sysinit: Finding module dependencies: succeeded
Nov 21 16:49:18 s4 kernel: Initializing CPU#1
Nov 21 16:48:54 s4 fsck: /export/home: clean, 15/8880128 files,
338466/17733751
blocks
Nov 21 16:49:18 s4 kernel: masked ExtINT on CPU#1
Nov 21 16:48:54 s4 rc.sysinit: Checking filesystems succeeded
Nov 21 16:49:18 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:48:54 s4 rc.sysinit: Mounting local filesystems: succeeded
Nov 21 16:49:18 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:48:54 s4 rc.sysinit: Enabling local filesystem quotas:
succeeded
Nov 21 16:49:18 s4 kernel: Calibrating delay loop... 1595.80 BogoMIPS
Nov 21 16:48:55 s4 rc.sysinit: Enabling swap space: succeeded
Nov 21 16:48:58 s4 init: Entering runlevel: 5
Nov 21 16:49:18 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:48:59 s4 kudzu: Updating /etc/fstab succeeded
Nov 21 16:49:18 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:11 s4 kudzu: succeeded
Nov 21 16:49:18 s4 kernel: Intel machine check reporting enabled on
CPU#1.
Nov 21 16:49:11 s4 sysctl: net.ipv4.ip_forward = 0
Nov 21 16:49:11 s4 sysctl: net.ipv4.conf.default.rp_filter = 1
Nov 21 16:49:11 s4 sysctl: kernel.sysrq = 0
Nov 21 16:49:11 s4 network: Setting network parameters: succeeded
Nov 21 16:49:19 s4 kernel: CPU1: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:49:12 s4 network: Bringing up interface lo: succeeded
Nov 21 16:49:19 s4 kernel: Booting processor 2/6 eip 2000
Nov 21 16:49:19 s4 netfs: Mounting other filesystems: succeeded
Nov 21 16:49:14 s4 network: Bringing up interface eth0: succeeded
Nov 21 16:49:19 s4 kernel: Initializing CPU#2
Nov 21 16:49:19 s4 kernel: masked ExtINT on CPU#2
Nov 21 16:49:19 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: Calibrating delay loop... 1595.80 BogoMIPS
Nov 21 16:49:19 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:49:19 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:19 s4 kernel: Intel machine check reporting enabled on
CPU#2.
Nov 21 16:49:19 s4 kernel: CPU2: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:49:19 s4 kernel: Booting processor 3/7 eip 2000
Nov 21 16:49:19 s4 kernel: Initializing CPU#3
Nov 21 16:49:19 s4 kernel: masked ExtINT on CPU#3
Nov 21 16:49:19 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: Calibrating delay loop... 1595.80 BogoMIPS
Nov 21 16:49:19 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:49:19 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:19 s4 kernel: Intel machine check reporting enabled on
CPU#3.
Nov 21 16:49:19 s4 kernel: CPU3: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:49:19 s4 kernel: Total of 4 processors activated (6379.92
BogoMIPS).
Nov 21 16:49:19 s4 kernel: ENABLING IO-APIC IRQs
Nov 21 16:49:19 s4 kernel: ...changing IO-APIC physical APIC ID to 2 ...
ok.
Nov 21 16:49:20 s4 ntpd[832]: ntpd 4.1.0 Wed Sep 5 06:54:30 EDT 2001
(1)
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 3 ...
ok.
Nov 21 16:49:20 s4 ntpd: ntpd startup succeeded
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 4 ...
ok.
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 5 ...
ok.
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 8 ...
ok.
Nov 21 16:49:20 s4 ntpd[832]: precision = 8 usec
Nov 21 16:49:20 s4 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 21 16:49:20 s4 ntpd[832]: kernel time discipline status 0040
Nov 21 16:49:20 s4 ntpd[832]: getnetnum: "idns" invalid host number,
line ignored
Nov 21 16:49:20 s4 ntpd[832]: frequency initialized -74.522 from
/etc/ntp/drift
Nov 21 16:49:20 s4 ntpd[832]: bind() fd 9, family 2, port 123, addr
224.0.1.1, in_classd=1 flags=0 fails: Address already in use
Nov 21 16:49:20 s4 ntpd[832]: ...multicast address 224.0.1.1 using
wildcard socket
Nov 21 16:49:20 s4 kernel: testing the IO APIC.......................
Nov 21 16:49:20 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 ypbind: ypbind startup succeeded
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 ypbind: bound to NIS server unmsrvr.unminc.com
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:22 s4 kernel: .................................... done.
Nov 21 16:49:22 s4 kernel: Using local APIC timer interrupts.
Nov 21 16:49:22 s4 kernel: calibrating APIC timer ...
Nov 21 16:49:22 s4 kernel: ..... CPU clock speed is 798.6734 MHz.
Nov 21 16:49:22 s4 kernel: ..... host bus clock speed is 99.8339 MHz.
Nov 21 16:49:22 s4 kernel: cpu: 0, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel:
CPU0<T0:998336,T1:798624,D:45,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel: cpu: 1, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel: cpu: 3, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel: cpu: 2, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel:
CPU2<T0:998336,T1:399328,D:7,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel:
CPU3<T0:998336,T1:199664,D:4,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel:
CPU1<T0:998336,T1:598976,D:26,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel: checking TSC synchronization across CPUs:
passed.
Nov 21 16:49:22 s4 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd885,
last bus=7
Nov 21 16:49:22 s4 kernel: PCI: Using configuration type 1
Nov 21 16:49:22 s4 kernel: PCI: Probing PCI hardware
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: PCI: Discovered primary peer bus 10 [IRQ]
Nov 21 16:49:22 s4 kernel: PCI: Discovered primary peer bus 11 [IRQ]
Nov 21 16:49:22 s4 kernel: PCI: Discovered primary peer bus 12 [IRQ]
Nov 21 16:49:22 s4 kernel: PCI: Using IRQ router PIIX [8086/2480] at
00:1f.0
Nov 21 16:49:22 s4 automount[942]: starting automounter version 3.1.7,
path = /cvs, maptype = yp, mapname = auto.cvs
Nov 21 16:49:22 s4 kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 21 16:49:22 s4 kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Nov 21 16:49:23 s4 automount[946]: starting automounter version 3.1.7,
path = /home, maptype = yp, mapname = auto.home
Nov 21 16:49:23 s4 autofs: automount startup succeeded
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B7,I1,P0) -> 16
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B7,I2,P0) -> 17
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B7,I3,P0) -> 18
Nov 21 16:49:23 s4 automount[942]: using kernel protocol version 3
Nov 21 16:49:23 s4 kernel: isapnp: Scanning for PnP cards...
Nov 21 16:49:24 s4 automount[946]: using kernel protocol version 3
Nov 21 16:49:24 s4 snmpd: snmpd startup succeeded
Nov 21 16:49:24 s4 kernel: isapnp: No Plug & Play device found
Nov 21 16:49:24 s4 kernel: Linux NET4.0 for Linux 2.4
Nov 21 16:49:24 s4 kernel: Based upon Swansea University Computer
Society NET3.039
Nov 21 16:49:24 s4 kernel: Initializing RT netlink socket
Nov 21 16:49:24 s4 kernel: Simple Boot Flag extension found and enabled.
Nov 21 16:49:24 s4 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.14)
Nov 21 16:49:24 s4 kernel: apm: disabled - APM is not SMP safe.
Nov 21 16:49:24 s4 kernel: mxt_scan_bios: enter
Nov 21 16:49:24 s4 kernel: Starting kswapd v1.8
Nov 21 16:49:24 s4 kernel: allocated 64 pages and 64 bhs reserved for
the highmem bounces
Nov 21 16:49:24 s4 sshd: Starting sshd:
Nov 21 16:49:24 s4 kernel: VFS: Diskquotas version dquot_6.5.0
initialized
Nov 21 16:49:25 s4 kernel: pty: 2048 Unix98 ptys configured
Nov 21 16:49:25 s4 kernel: Serial driver version 5.05c (2001-07-08) with
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 21 16:49:25 s4 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 21 16:49:25 s4 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 21 16:49:25 s4 kernel: Real Time Clock Driver v1.10d
Nov 21 16:49:25 s4 sshd: succeeded
Nov 21 16:49:25 s4 kernel: block: queued sectors max/low
2651538kB/2520466kB, 7808 slots per queue
Nov 21 16:49:26 s4 sshd: ^[[60G
Nov 21 16:49:26 s4 kernel: RAMDISK driver initialized: 16 RAM disks of
4096K size 1024 blocksize
Nov 21 16:49:26 s4 kernel: Uniform Multi-Platform E-IDE driver Revision:
6.31
Nov 21 16:49:26 s4 sshd:
Nov 21 16:49:26 s4 kernel: ide: Assuming 33MHz PCI bus speed for PIO
modes; override with idebus=xx
Nov 21 16:49:26 s4 kernel: PCI_IDE: unknown IDE controller on PCI bus 00
device
f9, VID=8086, DID=248b
Nov 21 16:49:26 s4 kernel: PCI: Device 00:1f.1 not available because of
resource collisions
Nov 21 16:49:26 s4 kernel: PCI_IDE: chipset revision 2
Nov 21 16:49:26 s4 kernel: PCI_IDE: not 100%% native mode: will probe
irqs laterNov 21 16:49:26 s4 kernel: ide0: BM-DMA at 0x1460-0x1467,
BIOS settings: hda:pio, hdb:pio
Nov 21 16:49:26 s4 rc: Starting sshd: succeeded
Nov 21 16:49:26 s4 kernel: ide1: BM-DMA at 0x1468-0x146f, BIOS
settings: hdc:pio, hdd:pio
Nov 21 16:49:26 s4 kernel: hda: ST380021A, ATA DISK drive
Nov 21 16:49:26 s4 kernel: hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM
drive
Nov 21 16:49:26 s4 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 21 16:49:26 s4 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 21 16:49:26 s4 kernel: hda: 156301488 sectors (80026 MB) w/2048KiB
Cache, CHS=9729/255/63
Nov 21 16:49:26 s4 kernel: ide-floppy driver 0.97
Nov 21 16:49:26 s4 kernel: Partition check:
Nov 21 16:49:26 s4 kernel: hda: hda1 hda2 hda3
Nov 21 16:49:26 s4 kernel: Floppy drive(s): fd0 is 1.44M
Nov 21 16:49:26 s4 kernel: FDC 0 is a post-1991 82077
Nov 21 16:49:26 s4 kernel: ide-floppy driver 0.97
Nov 21 16:49:27 s4 ucd-snmp[969]: UCD-SNMP version 4.2.1
Nov 21 16:49:27 s4 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Nov 21 16:49:27 s4 kernel: md: Autodetecting RAID arrays.
Nov 21 16:49:27 s4 kernel: md: autorun ...
Nov 21 16:49:27 s4 kernel: md: ... autorun DONE.
Nov 21 16:49:27 s4 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 21 16:49:27 s4 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Nov 21 16:49:27 s4 kernel: IP: routing cache hash table of 32768
buckets, 256Kbytes
Nov 21 16:49:27 s4 kernel: TCP: Hash tables configured (established
524288 bind
65536)
Nov 21 16:49:27 s4 kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 21 16:49:27 s4 kernel: NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.
Nov 21 16:49:27 s4 kernel: RAMDISK: Compressed image found at block 0
Nov 21 16:49:27 s4 kernel: Freeing initrd memory: 323k freed
Nov 21 16:49:27 s4 kernel: VFS: Mounted root (ext2 filesystem).
Nov 21 16:49:27 s4 kernel: Journalled Block Device driver loaded
Nov 21 16:49:27 s4 kernel: kjournald starting. Commit interval 5
seconds
Nov 21 16:49:27 s4 kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Nov 21 16:49:27 s4 kernel: Freeing unused kernel memory: 240k freed
Nov 21 16:49:27 s4 kernel: Adding Swap: 2096472k swap-space (priority
-1)
Nov 21 16:49:27 s4 kernel: usb.c: registered new driver usbdevfs
Nov 21 16:49:27 s4 kernel: usb.c: registered new driver hub
Nov 21 16:49:27 s4 xinetd[1022]: chargen disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: $Revision: 1.259 $ time 17:18:11
Sep 6 2001
Nov 21 16:49:27 s4 xinetd[1022]: chargen disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: High bandwidth mode enabled
Nov 21 16:49:27 s4 xinetd[1022]: daytime disabled, removing
Nov 21 16:49:27 s4 kernel: PCI: Setting latency timer of device 00:1d.0
to 64
Nov 21 16:49:27 s4 xinetd[1022]: daytime disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: USB UHCI at I/O 0x1400, IRQ 16
Nov 21 16:49:27 s4 kernel: usb-uhci.c: Detected 2 ports
Nov 21 16:49:27 s4 xinetd[1022]: echo disabled, removing
Nov 21 16:49:27 s4 xinetd[1022]: echo disabled, removing
Nov 21 16:49:27 s4 kernel: usb.c: new USB bus registered, assigned bus
number 1
Nov 21 16:49:27 s4 xinetd[1022]: finger disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: USB hub found
Nov 21 16:49:27 s4 xinetd[1022]: ntalk disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: 2 ports detected
Nov 21 16:49:27 s4 xinetd[1022]: exec disabled, removing
Nov 21 16:49:27 s4 kernel: PCI: Setting latency timer of device 00:1d.1
to 64
Nov 21 16:49:27 s4 xinetd[1022]: login disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: USB UHCI at I/O 0x1420, IRQ 19
Nov 21 16:49:27 s4 xinetd[1022]: shell disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: Detected 2 ports
Nov 21 16:49:27 s4 xinetd[1022]: rsync disabled, removing
Nov 21 16:49:27 s4 kernel: usb.c: new USB bus registered, assigned bus
number 2
Nov 21 16:49:27 s4 xinetd[1022]: talk disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: USB hub found
Nov 21 16:49:27 s4 xinetd[1022]: time disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: 2 ports detected
Nov 21 16:49:27 s4 xinetd[1022]: time disabled, removing
Nov 21 16:49:27 s4 kernel: PCI: Setting latency timer of device 00:1d.2
to 64
Nov 21 16:49:27 s4 kernel: usb-uhci.c: USB UHCI at I/O 0x1440, IRQ 18
Nov 21 16:49:27 s4 kernel: usb-uhci.c: Detected 2 ports
Nov 21 16:49:27 s4 kernel: usb.c: new USB bus registered, assigned bus
number 3
Nov 21 16:49:27 s4 kernel: hub.c: USB hub found
Nov 21 16:49:27 s4 kernel: hub.c: 2 ports detected
Nov 21 16:49:27 s4 kernel: usb-uhci.c: v1.251:USB Universal Host
Controller Interface driver
Nov 21 16:49:27 s4 kernel: EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,1),
internal journal
Nov 21 16:49:27 s4 kernel: kjournald starting. Commit interval 5
seconds
Nov 21 16:49:28 s4 kernel: EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,3),
internal journal
Nov 21 16:49:28 s4 kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Nov 21 16:49:28 s4 kernel: 0x378: FIFO is 16 bytes
Nov 21 16:49:28 s4 kernel: 0x378: writeIntrThreshold is 9
Nov 21 16:49:28 s4 kernel: 0x378: readIntrThreshold is 9
Nov 21 16:49:28 s4 kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE,COMPAT,EPP,ECP]
Nov 21 16:49:28 s4 kernel: parport0: irq 7 detected
Nov 21 16:49:28 s4 kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Nov 21 16:49:28 s4 kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
Modified by
Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Nov 21 16:49:28 s4 kernel: eth0: OEM i82557/i82558 10/100 Ethernet,
00:30:48:23:06:96, IRQ 17.
Nov 21 16:49:28 s4 kernel: Board assembly 000000-000, Physical
connectors present: RJ45
Nov 21 16:49:28 s4 kernel: Primary interface chip i82555 PHY #1.
Nov 21 16:49:28 s4 kernel: General self-test: passed.
Nov 21 16:49:28 s4 kernel: Serial sub-system self-test: passed.
Nov 21 16:49:28 s4 kernel: Internal registers self-test: passed.
Nov 21 16:49:28 s4 kernel: ROM checksum self-test: passed
(0xb874c1d3).
Nov 21 16:49:28 s4 kernel: eth1: OEM i82557/i82558 10/100 Ethernet,
00:30:48:23:06:97, IRQ 18.
Nov 21 16:49:28 s4 kernel: Board assembly 000000-000, Physical
connectors present: RJ45
Nov 21 16:49:28 s4 kernel: Primary interface chip i82555 PHY #1.
Nov 21 16:49:28 s4 kernel: General self-test: passed.
Nov 21 16:49:28 s4 kernel: Serial sub-system self-test: passed.
Nov 21 16:49:28 s4 kernel: Internal registers self-test: passed.
Nov 21 16:49:28 s4 kernel: ROM checksum self-test: passed
(0xb874c1d3).
Nov 21 16:49:28 s4 xinetd[1022]: xinetd Version 2.3.3 started with
libwrap options compiled in.
Nov 21 16:49:28 s4 xinetd[1022]: Started working: 2 available services
Nov 21 16:49:30 s4 xinetd: xinetd startup succeeded
Nov 21 16:49:32 s4 lpd: lpd startup succeeded
Nov 21 16:49:34 s4 sendmail: sendmail startup succeeded
Nov 21 16:49:34 s4 gpm: gpm startup succeeded
Nov 21 16:49:35 s4 crond: crond startup succeeded
Nov 21 16:49:36 s4 xfs: xfs startup succeeded
Nov 21 16:49:36 s4 xfs: listening on port 7100
Nov 21 16:49:36 s4 vncserver: Starting VNC server:
Nov 21 16:49:36 s4 vncserver: vncserver startup succeeded
Nov 21 16:49:36 s4 vncserver:
Nov 21 16:49:36 s4 rc: Starting vncserver: succeeded
Nov 21 16:49:37 s4 anacron: anacron startup succeeded
Nov 21 16:49:37 s4 xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/cyrillic (unreadable)
Nov 21 16:49:37 s4 xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/local (unreadable)
Nov 21 16:49:37 s4 xfs: ignoring font path element
/usr/share/AbiSuite/fonts (unreadable)
Nov 21 16:49:37 s4 atd: atd startup succeeded
Nov 21 16:49:42 s4 kernel: mtrr: type mismatch for fd000000,800000 old:
uncachable new: write-combining
The dmesg command:
NG: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 00F 0F 0 0 0 0 0 1 1 39
02 00F 0F 0 0 0 0 0 1 1 31
03 00F 0F 0 0 0 0 0 1 1 41
04 00F 0F 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 00F 0F 0 0 0 0 0 1 1 51
07 00F 0F 0 0 0 0 0 1 1 59
08 00F 0F 0 0 0 0 0 1 1 61
09 00F 0F 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 00F 0F 0 0 0 0 0 1 1 71
0d 00F 0F 0 0 0 0 0 1 1 79
0e 00F 0F 0 0 0 0 0 1 1 81
0f 00F 0F 0 0 0 0 0 1 1 89
10 00F 0F 1 1 0 1 0 1 1 91
11 00F 0F 1 1 0 1 0 1 1 99
12 00F 0F 1 1 0 1 0 1 1 A1
13 00F 0F 1 1 0 1 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #3......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #5......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 08000000
....... : arbitration: 08
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 08000000
....... : arbitration: 08
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 798.6734 MHz.
..... host bus clock speed is 99.8339 MHz.
cpu: 0, clocks: 998339, slice: 199667
CPU0<T0:998336,T1:798624,D:45,S:199667,C:998339>
cpu: 1, clocks: 998339, slice: 199667
cpu: 3, clocks: 998339, slice: 199667
cpu: 2, clocks: 998339, slice: 199667
CPU2<T0:998336,T1:399328,D:7,S:199667,C:998339>
CPU3<T0:998336,T1:199664,D:4,S:199667,C:998339>
CPU1<T0:998336,T1:598976,D:26,S:199667,C:998339>
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfd885, last bus=7
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Discovered primary peer bus 10 [IRQ]
PCI: Discovered primary peer bus 11 [IRQ]
PCI: Discovered primary peer bus 12 [IRQ]
PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B7,I1,P0) -> 16
PCI->APIC IRQ transform: (B7,I2,P0) -> 17
PCI->APIC IRQ transform: (B7,I3,P0) -> 18
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Simple Boot Flag extension found and enabled.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
apm: disabled - APM is not SMP safe.
mxt_scan_bios: enter
Starting kswapd v1.8
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 2651538kB/2520466kB, 7808 slots per queue
next reply other threads:[~2002-11-22 2:49 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-22 2:49 Craig Anderson [this message]
2002-11-22 6:33 ` hyper-threading Robert M. Hyatt
2002-11-22 9:19 ` WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org Dave Jones
2002-11-22 13:35 ` Alan Cox
2002-11-22 15:28 ` Robert M. Hyatt
2002-11-25 0:53 ` Alan Cox
2002-11-25 3:26 ` Robert M. Hyatt
2002-11-25 13:15 ` Alan Cox
2002-11-25 17:25 ` Robert M. Hyatt
2002-11-25 17:57 ` Mihai Burcea
-- strict thread matches above, loose matches on Subject: below --
2005-02-15 13:06 Rinat Yangurazov
2004-10-18 3:15 David Hill
2004-09-10 17:35 Agustín Ciciliani
2003-11-14 19:58 Ingo Claro
2003-07-18 20:48 M. J. Blom
2003-05-27 5:53 Mattias Kregert
2003-05-27 6:03 ` Randy.Dunlap
2003-05-27 20:52 ` Randy.Dunlap
2003-05-03 7:54 Joshua McClintock
2003-02-09 21:20 Eli
2003-01-13 7:30 D. Nathan Cookson
2002-11-29 19:52 R. Lemos
2002-10-12 9:33 Trevor Lee
2002-10-13 3:12 ` Randy.Dunlap
2002-10-21 22:57 ` Alan Cox
2002-08-10 18:41 Chris McGinlay
2002-01-16 21:23 Tim Lee
2003-01-30 18:48 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DDD9B56.6C3B5DFB@unminc.com \
--to=craiga@unminc.com \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.