From: "Masafumi OE" <masa@fumi.org>
To: "'Masaru Oki'" <m-oki@stratosphere.co.jp>
Cc: dev@dpdk.org
Subject: Re: Intel X552/557 is not working.
Date: Mon, 8 Jun 2015 15:45:02 +0900 [thread overview]
Message-ID: <002101d0a1b6$a5e0fe50$f1a2faf0$@fumi.org> (raw)
In-Reply-To: <CAFLKUzKLcC9vDK5i7CHoPL27UrHM+UnREz9szwW-dxySuzNpbA@mail.gmail.com>
Great!
I will try it.
Regards,
--
Masafumi OE, NAOJ
-----Original Message-----
From: Masaru Oki [mailto:m-oki@stratosphere.co.jp]
Sent: Monday, June 8, 2015 11:32 AM
To: Masafumi OE
Cc: <dev@dpdk.org>
Subject: Re: [dpdk-dev] Intel X552/557 is not working.
Hi,
I made (unofficial, quick) patch. The code is mostly pulled from FreeBSD.
My Ubuntu 14.04 on X10SDV-TLN4F is works fine.
http://www.e-neta.jp/~oki/dpdk-ixgbe.diff
2015-06-08 11:19 GMT+09:00 Masafumi OE <masa@fumi.org>:
> Hi,
>
> I'm trying to use X552/X557-AT 10GBASE-T NIC on Xeon-D 1540. However
> it did not work properly.
> Binding X552/557to PMD for ixgbe is fine but testpmd is not working on
> X552/557 because th_ixgbe_dev_init() return Hardware Initialization
> Failure:-3.
>
> Do you have any idea?
>
> --
> Supermicro X10SDV-TLN4F
> Running on CentOS 7.0:
> DPDK is getting via git.
> --
> $ lspci -nn | grep X55
> 03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet
> Connection X552/X557-AT 10GBASE-T [8086:15ad]
> 03:00.1 Ethernet controller [0200]: Intel Corporation Ethernet
> Connection X552/X557-AT 10GBASE-T [8086:15ad]
>
> $ ./dpdk_nic_bind.py --status
>
> Network devices using DPDK-compatible driver
> ============================================
> 0000:03:00.0 'Ethernet Connection X552/X557-AT 10GBASE-T'
> drv=uio_pci_generic unused=vfio-pci
> 0000:03:00.1 'Ethernet Connection X552/X557-AT 10GBASE-T'
> drv=uio_pci_generic unused=vfio-pci
>
> Network devices using kernel driver
> ===================================
> 0000:05:00.0 'I350 Gigabit Network Connection' if=eno1 drv=igb
> unused=vfio-pci,uio_pci_generic *Active*
> 0000:05:00.1 'I350 Gigabit Network Connection' if=eno2 drv=igb
> unused=vfio-pci,uio_pci_generic
>
> Other network devices
> =====================
> <none>
>
> --
> $ sudo -s app/testpmd -c 300 -n 4 -- -i --burst=32 --rxfreet=32
> --mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32
> --txqflags=0xf01
> EAL: Detected lcore 0 as core 0 on socket 0
> EAL: Detected lcore 1 as core 1 on socket 0
> EAL: Detected lcore 2 as core 2 on socket 0
> EAL: Detected lcore 3 as core 3 on socket 0
> EAL: Detected lcore 4 as core 4 on socket 0
> EAL: Detected lcore 5 as core 5 on socket 0
> EAL: Detected lcore 6 as core 6 on socket 0
> EAL: Detected lcore 7 as core 7 on socket 0
> EAL: Detected lcore 8 as core 0 on socket 0
> EAL: Detected lcore 9 as core 1 on socket 0
> EAL: Detected lcore 10 as core 2 on socket 0
> EAL: Detected lcore 11 as core 3 on socket 0
> EAL: Detected lcore 12 as core 4 on socket 0
> EAL: Detected lcore 13 as core 5 on socket 0
> EAL: Detected lcore 14 as core 6 on socket 0
> EAL: Detected lcore 15 as core 7 on socket 0
> EAL: Support maximum 128 logical core(s) by configuration.
> EAL: Detected 16 lcore(s)
> EAL: VFIO modules not all loaded, skip VFIO support...
> EAL: Setting up memory...
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7ff893200000 (size = 0x200000)
> EAL: Ask a virtual area of 0xc00000 bytes
> EAL: Virtual area found at 0x7ff892400000 (size = 0xc00000)
> EAL: Ask a virtual area of 0x7000000 bytes
> EAL: Virtual area found at 0x7ff88b200000 (size = 0x7000000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7ff88ae00000 (size = 0x200000)
> EAL: Requesting 64 pages of size 2MB from socket 0
> ^NEAL: TSC frequency is ~2000000 KHz
> EAL: Master lcore 8 is ready (tid=9472d900;cpuset=[8])
> EAL: lcore 9 is ready (tid=8a5fe700;cpuset=[9])
> EAL: PCI device 0000:03:00.0 on NUMA socket 0
> EAL: probe driver: 8086:15ad rte_ixgbe_pmd
> EAL: PCI memory mapped at 0x7ff893000000
> EAL: PCI memory mapped at 0x7ff8946f3000
> PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -3
> EAL: Error - exiting with code: 1
> Cause: Requested device 0000:03:00.0 cannot be used
>
> --
> Masafumi OE, NAOJ
>
>
next prev parent reply other threads:[~2015-06-08 6:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-08 2:19 Intel X552/557 is not working Masafumi OE
2015-06-08 2:32 ` Masaru Oki
2015-06-08 6:45 ` Masafumi OE [this message]
2015-06-11 6:41 ` Lu, Wenzhuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002101d0a1b6$a5e0fe50$f1a2faf0$@fumi.org' \
--to=masa@fumi.org \
--cc=dev@dpdk.org \
--cc=m-oki@stratosphere.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.