All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Masafumi OE" <masa@fumi.org>
To: <dev@dpdk.org>
Subject: Intel X552/557 is not working.
Date: Mon, 8 Jun 2015 11:19:52 +0900	[thread overview]
Message-ID: <010a01d0a191$9afb8890$d0f299b0$@fumi.org> (raw)
In-Reply-To: 

Hi,

I'm trying to use X552/X557-AT 10GBASE-T NIC on Xeon-D 1540. However it did
not work properly.
Binding X552/557to PMD for ixgbe is fine but testpmd is not working on
X552/557 because th_ixgbe_dev_init() return Hardware Initialization
Failure:-3.

Do you have any idea?

--
Supermicro X10SDV-TLN4F
Running on CentOS 7.0:
DPDK is getting via git.
--
$ lspci -nn | grep X55
03:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection
X552/X557-AT 10GBASE-T [8086:15ad]
03:00.1 Ethernet controller [0200]: Intel Corporation Ethernet Connection
X552/X557-AT 10GBASE-T [8086:15ad]

$ ./dpdk_nic_bind.py  --status

Network devices using DPDK-compatible driver
============================================
0000:03:00.0 'Ethernet Connection X552/X557-AT 10GBASE-T'
drv=uio_pci_generic unused=vfio-pci
0000:03:00.1 'Ethernet Connection X552/X557-AT 10GBASE-T'
drv=uio_pci_generic unused=vfio-pci

Network devices using kernel driver
===================================
0000:05:00.0 'I350 Gigabit Network Connection' if=eno1 drv=igb
unused=vfio-pci,uio_pci_generic *Active*
0000:05:00.1 'I350 Gigabit Network Connection' if=eno2 drv=igb
unused=vfio-pci,uio_pci_generic

Other network devices
=====================
<none>

--
$ sudo -s app/testpmd -c 300 -n 4 -- -i --burst=32 --rxfreet=32
--mbcache=250 --txpt=32 --rxht=8 --rxwt=0 --txfreet=32 --txrst=32
--txqflags=0xf01
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 0 on socket 0
EAL: Detected lcore 9 as core 1 on socket 0
EAL: Detected lcore 10 as core 2 on socket 0
EAL: Detected lcore 11 as core 3 on socket 0
EAL: Detected lcore 12 as core 4 on socket 0
EAL: Detected lcore 13 as core 5 on socket 0
EAL: Detected lcore 14 as core 6 on socket 0
EAL: Detected lcore 15 as core 7 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 16 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up memory...
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ff893200000 (size = 0x200000)
EAL: Ask a virtual area of 0xc00000 bytes
EAL: Virtual area found at 0x7ff892400000 (size = 0xc00000)
EAL: Ask a virtual area of 0x7000000 bytes
EAL: Virtual area found at 0x7ff88b200000 (size = 0x7000000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7ff88ae00000 (size = 0x200000)
EAL: Requesting 64 pages of size 2MB from socket 0
^NEAL: TSC frequency is ~2000000 KHz
EAL: Master lcore 8 is ready (tid=9472d900;cpuset=[8])
EAL: lcore 9 is ready (tid=8a5fe700;cpuset=[9])
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL:   probe driver: 8086:15ad rte_ixgbe_pmd
EAL:   PCI memory mapped at 0x7ff893000000
EAL:   PCI memory mapped at 0x7ff8946f3000
PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -3
EAL: Error - exiting with code: 1
  Cause: Requested device 0000:03:00.0 cannot be used

--
Masafumi OE, NAOJ

             reply	other threads:[~2015-06-08  2:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-08  2:19 Masafumi OE [this message]
2015-06-08  2:32 ` Intel X552/557 is not working Masaru Oki
2015-06-08  6:45   ` Masafumi OE
2015-06-11  6:41     ` Lu, Wenzhuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='010a01d0a191$9afb8890$d0f299b0$@fumi.org' \
    --to=masa@fumi.org \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.