From: "Doug Smythies" <dsmythies@telus.net>
To: sedat.dilek@gmail.com
Cc: "'Srinivas Pandruvada'" <srinivas.pandruvada@linux.intel.com>,
"'Rafael J. Wysocki'" <rafael.j.wysocki@intel.com>,
"'Jörg Otte'" <jrg.otte@gmail.com>,
linux-pm@vger.kernel.org, 'LKML' <linux-kernel@vger.kernel.org>
Subject: RE: [intel-pstate driver regression] processor frequency very high even if in idle
Date: Thu, 31 Mar 2016 07:30:04 -0700 [thread overview]
Message-ID: <002301d18b59$d208fe50$761afaf0$@net> (raw)
In-Reply-To: <CA+icZUXaoeQz5vMzPxjOaAzbzdQ4D1MV2dG5EvXAM54k6EOz1g@mail.gmail.com>
On 2016.03.31 01:11 Sedat Dilek wrote:
> On Thu, Mar 31, 2016 at 12:50 AM, Doug Smythies <dsmythies@telus.net> wrote:
>> On 2106.03.30 15:19 Srinivas Pandruvada wrote:
>>>>
>>>> Please see attached files.
>>>>
>>> Thanks. Your logs make sense. You have config set to performance mode
>>> by default (Which I believe default in all kernel Ubuntu).
>>
>> Yes, but via a startup script, by default Ubuntu sets the governor
>> to powersave 1 minute after boot (or ondemand if acpi-cpufreq).
>>
>
> Can you give more and precise informations on this?
> script-name etc.
The script is /etc/init.d/ondemand
It sleeps for 1 minute and then sets the scaling
governor, based on availability, in the following order:
interactive
ondemand
powersave
See also:
$ ls -l /etc/rc?.d/S06ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc2.d/S06ondemand -> ../init.d/ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc3.d/S06ondemand -> ../init.d/ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc4.d/S06ondemand -> ../init.d/ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc5.d/S06ondemand -> ../init.d/ondemand
>From your other e-mail:
> is somehow showing higher
> values than TSC_MHz.
> Not sure if this really make sense if TSC_MHz is a max-value (which I
> don't know it is).
That is normal, and is turbo mode. Example:
$ sudo turbostat -i 3 --msr=0x199
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz MSR 0x199
- 478 12.53 3798 3413 0x00000000
0 3 0.09 3595 3413 0x00002500
4 1 0.03 3568 3413 0x00001000
1 4 0.11 3649 3413 0x00001200
5 2 0.07 3592 3413 0x00001000
2 3 0.08 3628 3413 0x00001000
6 1 0.03 3546 3413 0x00001000
3 1 0.02 3733 3413 0x00001000
7 3808 99.91 3799 3411 0x00002600
... Doug
WARNING: multiple messages have this Message-ID (diff)
From: "Doug Smythies" <dsmythies@telus.net>
To: <sedat.dilek@gmail.com>
Cc: "'Srinivas Pandruvada'" <srinivas.pandruvada@linux.intel.com>,
"'Rafael J. Wysocki'" <rafael.j.wysocki@intel.com>,
"'Jörg Otte'" <jrg.otte@gmail.com>,
linux-pm@vger.kernel.org, 'LKML' <linux-kernel@vger.kernel.org>
Subject: RE: [intel-pstate driver regression] processor frequency very high even if in idle
Date: Thu, 31 Mar 2016 07:30:04 -0700 [thread overview]
Message-ID: <002301d18b59$d208fe50$761afaf0$@net> (raw)
In-Reply-To: <CA+icZUXaoeQz5vMzPxjOaAzbzdQ4D1MV2dG5EvXAM54k6EOz1g@mail.gmail.com>
On 2016.03.31 01:11 Sedat Dilek wrote:
> On Thu, Mar 31, 2016 at 12:50 AM, Doug Smythies <dsmythies@telus.net> wrote:
>> On 2106.03.30 15:19 Srinivas Pandruvada wrote:
>>>>
>>>> Please see attached files.
>>>>
>>> Thanks. Your logs make sense. You have config set to performance mode
>>> by default (Which I believe default in all kernel Ubuntu).
>>
>> Yes, but via a startup script, by default Ubuntu sets the governor
>> to powersave 1 minute after boot (or ondemand if acpi-cpufreq).
>>
>
> Can you give more and precise informations on this?
> script-name etc.
The script is /etc/init.d/ondemand
It sleeps for 1 minute and then sets the scaling
governor, based on availability, in the following order:
interactive
ondemand
powersave
See also:
$ ls -l /etc/rc?.d/S06ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc2.d/S06ondemand -> ../init.d/ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc3.d/S06ondemand -> ../init.d/ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc4.d/S06ondemand -> ../init.d/ondemand
lrwxrwxrwx 1 root root 18 Mar 8 09:51 /etc/rc5.d/S06ondemand -> ../init.d/ondemand
>From your other e-mail:
> is somehow showing higher
> values than TSC_MHz.
> Not sure if this really make sense if TSC_MHz is a max-value (which I
> don't know it is).
That is normal, and is turbo mode. Example:
$ sudo turbostat -i 3 --msr=0x199
CPU Avg_MHz %Busy Bzy_MHz TSC_MHz MSR 0x199
- 478 12.53 3798 3413 0x00000000
0 3 0.09 3595 3413 0x00002500
4 1 0.03 3568 3413 0x00001000
1 4 0.11 3649 3413 0x00001200
5 2 0.07 3592 3413 0x00001000
2 3 0.08 3628 3413 0x00001000
6 1 0.03 3546 3413 0x00001000
3 1 0.02 3733 3413 0x00001000
7 3808 99.91 3799 3411 0x00002600
... Doug
next prev parent reply other threads:[~2016-03-31 14:30 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-30 21:41 [intel-pstate driver regression] processor frequency very high even if in idle Sedat Dilek
2016-03-30 21:58 ` Rafael J. Wysocki
2016-03-30 22:23 ` Sedat Dilek
2016-03-30 22:29 ` Rafael J. Wysocki
2016-03-30 22:18 ` Srinivas Pandruvada
2016-03-30 22:25 ` Rafael J. Wysocki
2016-03-30 22:46 ` Srinivas Pandruvada
2016-03-30 23:17 ` Pandruvada, Srinivas
2016-03-30 23:25 ` Sedat Dilek
2016-03-30 23:28 ` Rafael J. Wysocki
2016-03-30 23:32 ` Sedat Dilek
2016-03-30 23:41 ` Rafael J. Wysocki
2016-03-31 6:38 ` Sedat Dilek
2016-03-31 7:45 ` Sedat Dilek
[not found] ` <CAA=4085Mmv7gRpJid8UGQ4ti6c1HhaENnogd8aPrg6E-w68QWg@mail.gmail.com>
2016-03-31 7:28 ` Navin P.S
2016-03-30 22:50 ` Doug Smythies
2016-03-30 23:12 ` Srinivas Pandruvada
2016-03-31 8:10 ` Sedat Dilek
2016-03-31 14:30 ` Doug Smythies [this message]
2016-03-31 14:30 ` Doug Smythies
2016-04-02 6:12 ` Sedat Dilek
[not found] ` <CA+icZUVHyq7dOh457rYv+2nmNxPevY0ZcqxhQVhYG4Z1D-NaDA@mail.gmail.com>
2016-04-02 15:28 ` Srinivas Pandruvada
2016-04-02 17:19 ` Jörg Otte
2016-04-02 18:20 ` Sedat Dilek
2016-04-03 18:59 ` Doug Smythies
2016-04-03 18:59 ` Doug Smythies
2016-04-04 5:13 ` Sedat Dilek
2016-04-04 6:14 ` Doug Smythies
2016-04-04 6:14 ` Doug Smythies
2016-04-04 14:12 ` Sedat Dilek
-- strict thread matches above, loose matches on Subject: below --
2016-03-29 17:24 Jörg Otte
2016-03-29 17:32 ` Jörg Otte
2016-03-29 21:34 ` Rafael J. Wysocki
2016-03-30 10:17 ` Jörg Otte
2016-03-30 11:05 ` Rafael J. Wysocki
2016-03-30 15:29 ` Jörg Otte
2016-03-30 18:39 ` Rafael J. Wysocki
2016-03-31 9:05 ` Jörg Otte
2016-03-31 11:42 ` Rafael J. Wysocki
2016-03-31 15:25 ` Jörg Otte
2016-03-31 15:43 ` Rafael J. Wysocki
2016-03-31 16:10 ` Srinivas Pandruvada
2016-03-31 17:27 ` Jörg Otte
2016-03-31 17:55 ` Srinivas Pandruvada
2016-04-01 0:08 ` Rafael J. Wysocki
2016-04-01 9:42 ` Jörg Otte
2016-04-01 15:05 ` Srinivas Pandruvada
2016-04-01 20:24 ` Rafael J. Wysocki
2016-04-01 9:20 ` Jörg Otte
2016-04-01 12:40 ` Rafael J. Wysocki
2016-04-01 14:06 ` Jörg Otte
2016-04-01 17:44 ` Srinivas Pandruvada
2016-04-01 18:31 ` Doug Smythies
2016-04-01 18:41 ` Srinivas Pandruvada
2016-04-01 19:54 ` Rafael J. Wysocki
2016-04-01 23:36 ` Doug Smythies
2016-04-02 0:28 ` Rafael J. Wysocki
2016-04-01 20:28 ` Rafael J. Wysocki
2016-04-02 22:50 ` Rafael J. Wysocki
2016-04-01 15:20 ` Doug Smythies
2016-04-01 16:46 ` Jörg Otte
2016-04-01 17:34 ` Jörg Otte
2016-03-30 15:33 ` Pandruvada, Srinivas
2016-03-30 15:51 ` Jörg Otte
2016-03-30 18:50 ` Doug Smythies
2016-03-30 18:50 ` Doug Smythies
2016-03-30 18:58 ` Srinivas Pandruvada
2016-03-30 20:12 ` Rafael J. Wysocki
2016-03-30 20:26 ` Srinivas Pandruvada
2016-03-31 9:23 ` Jörg Otte
2016-03-31 14:39 ` Doug Smythies
2016-03-31 14:39 ` Doug Smythies
2016-03-31 15:06 ` Srinivas Pandruvada
2016-03-31 15:32 ` Jörg Otte
2016-03-31 15:10 ` Doug Smythies
2016-03-31 15:10 ` Doug Smythies
2016-04-01 7:20 ` Doug Smythies
2016-04-01 7:20 ` Doug Smythies
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002301d18b59$d208fe50$761afaf0$@net' \
--to=dsmythies@telus.net \
--cc=jrg.otte@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael.j.wysocki@intel.com \
--cc=sedat.dilek@gmail.com \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.