[PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T demodulator driver

[suzuki.katsuhiro@socionext.com (Katsuhiro Suzuki)]

Hello Mauro,

> -----Original Message-----
> From: linux-media-owner at vger.kernel.org <linux-media-owner@vger.kernel.org> On
> Behalf Of Mauro Carvalho Chehab
> Sent: Friday, July 6, 2018 8:16 PM
> To: Suzuki, Katsuhiro/?? ?? <suzuki.katsuhiro@socionext.com>
> Cc: linux-media at vger.kernel.org; Masami Hiramatsu
<masami.hiramatsu@linaro.org>;
> Jassi Brar <jaswinder.singh@linaro.org>; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; Abylay Ospan <aospan@netup.ru>
> Subject: Re: [PATCH v3] media: dvb-frontends: add Socionext SC1501A ISDB-S/T
> demodulator driver
> 
> Em Fri, 6 Jul 2018 15:04:08 +0900
> "Katsuhiro Suzuki" <suzuki.katsuhiro@socionext.com> escreveu:
> 
> > Here is the log of dvb-fe-tool on my environment.
> >
> > --------------------
> > # ./utils/dvb/.libs/dvb-fe-tool -d isdbs
> > Changing delivery system to: ISDBS
> > ERROR    FE_SET_VOLTAGE: Unknown error 524
> 
> Hmm... ENOTSUPP. Doesn't the device supposed to be able to power on the
> LNBf?

Ah, maybe it's not implemented yet in Helene driver.


> 
> Anyway, I changed the error print message to be clearer, displaying
> instead:
> 
>   ERROR    FE_SET_VOLTAGE: driver doesn't support it!
> 

It's nice for users. Thanks!


> >
> > # ./utils/dvb/.libs/dvb-fe-tool
> > Device Socionext SC1501A (/dev/dvb/adapter0/frontend0) capabilities:
> >      CAN_FEC_AUTO
> >      CAN_GUARD_INTERVAL_AUTO
> >      CAN_HIERARCHY_AUTO
> >      CAN_INVERSION_AUTO
> >      CAN_QAM_AUTO
> >      CAN_TRANSMISSION_MODE_AUTO
> > DVB API Version 5.11, Current v5 delivery system: ISDBS
> > Supported delivery systems:
> >     [ISDBS]
> >      ISDBT
> > Frequency range for the current standard:
> > From:             470 MHz
> > To:              2.07 GHz
> > Step:            25.0 kHz
> > Symbol rate ranges for the current standard:
> > From:                 0Bauds
> > To:                   0Bauds
> 
> That seems a driver issue. The ISDB-S ops.info should be
> filling both symbol_rate_min and symbol_rate_max.
> 
> I suspect that both should be filled with 28860000.
> 
> The dvb_frontend.c core might hardcode it, but, IMHO,
> it is better to keep those information inside the
> tuner/frontend ops.info.
> 

Indeed, thank you for reviewing. I fixed my driver. It seems works fine.

----
# utils/dvb/.libs/dvb-fe-tool -a 0
Device Socionext SC1501A (/dev/dvb/adapter0/frontend0) capabilities:
     CAN_FEC_AUTO
     CAN_GUARD_INTERVAL_AUTO
     CAN_HIERARCHY_AUTO
     CAN_INVERSION_AUTO
     CAN_QAM_AUTO
     CAN_TRANSMISSION_MODE_AUTO
DVB API Version 5.11, Current v5 delivery system: ISDBS
Supported delivery systems:
    [ISDBS]
     ISDBT
Frequency range for the current standard:
From:             470 MHz
To:              2.07 GHz
Step:            25.0 kHz
Symbol rate ranges for the current standard:
From:            28.9 MBauds
To:              28.9 MBauds
SEC: set voltage to OFF
ERROR    FE_SET_VOLTAGE: Operation not permitted
----


> > SEC: set voltage to OFF
> > ERROR    FE_SET_VOLTAGE: Operation not permitted
> >
> >
> > # ./utils/dvb/.libs/dvb-fe-tool -d isdbt
> > Changing delivery system to: ISDBT
> > ERROR    FE_SET_VOLTAGE: Unknown error 524
> >
> > # ./utils/dvb/.libs/dvb-fe-tool
> > Device Socionext SC1501A (/dev/dvb/adapter0/frontend0) capabilities:
> >      CAN_FEC_AUTO
> >      CAN_GUARD_INTERVAL_AUTO
> >      CAN_HIERARCHY_AUTO
> >      CAN_INVERSION_AUTO
> >      CAN_QAM_AUTO
> >      CAN_TRANSMISSION_MODE_AUTO
> > DVB API Version 5.11, Current v5 delivery system: ISDBT
> > Supported delivery systems:
> >      ISDBS
> >     [ISDBT]
> > Frequency range for the current standard:
> > From:             470 MHz
> > To:              2.07 GHz
> > Step:            25.0 kHz
> 
> The rest looks OK for me.
> 
> > > > For example, Helene uses these info for only Ter or Sat freq ranges:
> > > >
> > > > 		.name = "Sony HELENE Ter tuner",
> > > > 		.frequency_min_hz  =    1 * MHz,
> > > > 		.frequency_max_hz  = 1200 * MHz,
> > > > 		.frequency_step_hz =   25 * kHz,
> > > >
> > > > 		.name = "Sony HELENE Sat tuner",
> > > > 		.frequency_min_hz  =  500 * MHz,
> > > > 		.frequency_max_hz  = 2500 * MHz,
> > > > 		.frequency_step_hz =    1 * MHz,
> > > >
> > > > Is this better to add new info for both system?
> > > >
> > > > 		.name = "Sony HELENE Sat/Ter tuner",
> > > > 		.frequency_min_hz  =    1 * MHz,
> > > > 		.frequency_max_hz  = 2500 * MHz,
> > > > 		.frequency_step_hz =   25 * kHz, // Is this correct...?
> > >
> > > That is indeed a very good question, and maybe a reason why we
> > > may need other approaches.
> > >
> > > See, if the tuner is capable of tuning from 1 MHz to 2500 MHz,
> > > the frequency range should be ok. It would aget_frontend_algoctually be
pretty
> cool
> > > to use a tuner with such wide range for SDR, if the hardware supports
> > > raw I/Q collect :-D
> > >
> > > The frequency step is a different issue. If the tuner driver uses
> > > DVBFE_ALGO_SW (e. g. if ops.get_frontend_algo() returns it, or if
> > > this function is not defined), then the step will be used to adjust
> > > the zigzag interactions. If it is too small, the tuning will lose
> > > channels if the signal is not strong.
> > >
> >
> > Thank you for describing. It's difficult problem...
> 
> I double-checked the implementation. We don't need to worry about
> zigzag, provided that the ISDB-S implementation at the core is correct.
> 
> For satellite/cable standards, the zigzag logic takes the symbol
> rate into account, and not the stepsize:
> 
>                 case SYS_DVBS:
>                 case SYS_DVBS2:
>                 case SYS_ISDBS:
>                 case SYS_TURBO:
>                 case SYS_DVBC_ANNEX_A:
>                 case SYS_DVBC_ANNEX_C:
>                         fepriv->min_delay = HZ / 20;
>                         fepriv->step_size = c->symbol_rate / 16000;
>                         fepriv->max_drift = c->symbol_rate / 2000;
>                         break;
> 
> For terrestrial standards, it uses the stepsize:
> 
>                 case SYS_DVBT:
>                 case SYS_DVBT2:
>                 case SYS_ISDBT:
>                 case SYS_DTMB:
>                         fepriv->min_delay = HZ / 20;
>                         fepriv->step_size = dvb_frontend_get_stepsize(fe) * 2;
>                         fepriv->max_drift = (dvb_frontend_get_stepsize(fe) * 2)
+
> 1;
>                         break;
> 
> So, having a value of 25 kHz there won't affect the zigzag algorithm
> for ISDB-S, as it will be used only for ISDB-T.
> 

Thank you for checking and describing. I checked it too.

Default value is fine as you said, and we can use get_tune_settings() 
callback if we face the problem or need different settings for each 
delivery systems in the future.

        /* get frontend-specific tuning settings */
        memset(&fetunesettings, 0, sizeof(struct dvb_frontend_tune_settings));
        if (fe->ops.get_tune_settings && (fe->ops.get_tune_settings(fe,
&fetunesettings) == 0)) {
                fepriv->min_delay = (fetunesettings.min_delay_ms * HZ) / 1000;
                fepriv->max_drift = fetunesettings.max_drift;
                fepriv->step_size = fetunesettings.step_size;
        } else {
                /* default values */
                ...


> > > In the specific case of helene, it doesn't have a get_frontend_algo,
> > > so it will use the step frequency.
> > >
> > > I'm not sure how to solve this issue. Maybe Abylay may shed a light
> > > here, if helene does sigzag in hardware or not.
> > >
> >
> > As far as I know, Helene does not have automatic scan mechanism in
> > hardware.
> 
> Ok, so the driver is doing the right thing here.
> 
> > > If it does in hardware, you could add a get_frontend_algo() routine
> > > at helene driver and return DVBFE_ALGO_HW. The tuning zigzag software
> > > algorithm in the Kernel will stop, as it will rely at the hardware.
> > >
> > > Please notice that, if the hardware doesn't do zigzag itself, this
> > > will make it lose channels. On the other hand, if the hardware does
> > > have sigzag, changing to DVBFE_ALGO_HW will speedup tuning, as the
> > > Kernel won't try to do sigzag itself.
> > >
> >
> > ISDB-T uses 6MHz bandwidth per channel (in Japan), ISDB-S for
> > BS/CS110 uses 38.36MHz bandwidth. Maybe 1MHz zigzag step is large for
> > ISDB-T system and 25kHz is small for ISDB-S system.
> 
> Yeah, but, after double-checking the logic, for ISDB-S, it will
> use:
> 
> 	c->symbol_rate = 28860000;
> 	c->rolloff = ROLLOFF_35;
> 	c->bandwidth_hz = c->symbol_rate / 100 * 135;
> 
> That would actually set the ISDB-S channel separation to 38.961 MHz.
> 
> By setting symbol_rate like that, the zigzag for ISDB-S will
> be defined by:
> 
>        fepriv->step_size = c->symbol_rate / 16000; /* 38.961MHz / 16000 =
.002435
> - e. g. steps of ~25 kHz */
>        fepriv->max_drift = c->symbol_rate / 2000;  /* 38.961MHz / 2000 =
.0194805
> - e. g. max drift of ~195 kHz */
> 
> Funny enough, it will be using about 25 kHz as step size for ISDB-S.
> 
> I have no idea if the ISDB-S standard defines the zigzag logic,
> but I would be expecting a higher value for it. So, perhaps
> the ISDB-S zigzag could be optimized.
> 
> Thanks,
> Mauro

Hmm, interesting. I don't know zigzag for ISDB-S too, sorry...

Anyway, I don't worry about that. I said in above, we can use 
get_tune_settings() for fine tuning.


Regards,
--
Katsuhiro Suzuki