All of lore.kernel.org
 help / color / mirror / Atom feed
From: "chaithrika" <chaithrika@ti.com>
To: "'Chaithrika U S'" <chaithrika@ti.com>,
	<linux-media@vger.kernel.org>,
	"'Russell King'" <rmk@arm.linux.org.uk>
Cc: <mchehab@infradead.org>, <hverkuil@xs4all.nl>,
	<davinci-linux-open-source@linux.davincidsp.com>,
	<linux@arm.linux.org.uk>, "'Manjunath Hadli'" <mrh@ti.com>,
	"'Brijesh Jadav'" <brijesh.j@ti.com>,
	"'Kevin Hilman'" <khilman@deeprootsystems.com>
Subject: RE: [PATCH v2] ARM: DaVinci: DM646x Video: Platform and board specific setup
Date: Wed, 15 Jul 2009 09:45:05 +0530	[thread overview]
Message-ID: <002e01ca0502$d5353d30$7f9fb790$@com> (raw)
In-Reply-To: <1246967577-8573-1-git-send-email-chaithrika@ti.com>

Russell,

Requesting your review and ack on this updated patch.

Regards,
Chaithrika

On Tue, Jul 07, 2009 at 17:22:57, Chaithrika U S wrote:
> Platform specific display device setup for DM646x EVM
> 
> Add platform device and resource structures. Also define a platform
specific clock setup function that can be accessed by the driver to
configure the clock and CPLD.
> 
> Signed-off-by: Manjunath Hadli <mrh@ti.com>
> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
> Signed-off-by: Chaithrika U S <chaithrika@ti.com>
> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
> ---
> Applies to Davinci GIT tree.The current version has updates as per review
comments from Russell King
> 
>  arch/arm/mach-davinci/board-dm646x-evm.c    |  125
+++++++++++++++++++++++++++
>  arch/arm/mach-davinci/dm646x.c              |   62 +++++++++++++
>  arch/arm/mach-davinci/include/mach/dm646x.h |   24 +++++
>  3 files changed, 211 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c
b/arch/arm/mach-davinci/board-dm646x-evm.c
> index 575c6ca..3e168d7 100644
> --- a/arch/arm/mach-davinci/board-dm646x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
> @@ -52,6 +52,19 @@
>  #define DM646X_EVM_PHY_MASK		(0x2)
>  #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
>  
> +#define VIDCLKCTL_OFFSET	(0x38)
> +#define VSCLKDIS_OFFSET		(0x6c)
> +
> +#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
> +#define VCH2CLK_SYSCLK8		(BIT(9))
> +#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
> +#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
> +#define VCH3CLK_SYSCLK8		(BIT(13))
> +#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
> +
> +#define VIDCH2CLK		(BIT(10))
> +#define VIDCH3CLK		(BIT(11))
> +
>  static struct davinci_uart_config uart_config __initdata = {
>  	.enabled_uarts = (1 << 0),
>  };
> @@ -238,6 +251,40 @@ static struct snd_platform_data dm646x_evm_snd_data[]
= {
>  	},
>  };
>  
> +static struct i2c_client *cpld_client;
> +
> +static int cpld_video_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	cpld_client = client;
> +	return 0;
> +}
> +
> +static int __devexit cpld_video_remove(struct i2c_client *client) {
> +	cpld_client = NULL;
> +	return 0;
> +}
> +
> +static const struct i2c_device_id cpld_video_id[] = {
> +	{ "cpld_video", 0 },
> +	{ }
> +};
> +
> +static struct i2c_driver cpld_video_driver = {
> +	.driver = {
> +		.name	= "cpld_video",
> +	},
> +	.probe		= cpld_video_probe,
> +	.remove		= cpld_video_remove,
> +	.id_table	= cpld_video_id,
> +};
> +
> +static void evm_init_cpld(void)
> +{
> +	i2c_add_driver(&cpld_video_driver);
> +}
> +
>  static struct i2c_board_info __initdata i2c_info[] =  {
>  	{
>  		I2C_BOARD_INFO("24c256", 0x50),
> @@ -247,6 +294,9 @@ static struct i2c_board_info __initdata i2c_info[] =
{
>  		I2C_BOARD_INFO("pcf8574a", 0x38),
>  		.platform_data	= &pcf_data,
>  	},
> +	{
> +		I2C_BOARD_INFO("cpld_video", 0x3B),
> +	},
>  };
>  
>  static struct davinci_i2c_platform_data i2c_pdata = { @@ -254,10 +304,84
@@ static struct davinci_i2c_platform_data i2c_pdata = {
>  	.bus_delay      = 0 /* usec */,
>  };
>  
> +static int set_vpif_clock(int mux_mode, int hd) {
> +	int val = 0;
> +	int err = 0;
> +	unsigned int value;
> +	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
> +
> +	if (!cpld_client)
> +		return -ENXIO;
> +
> +	/* disable the clock */
> +	value = __raw_readl(base + VSCLKDIS_OFFSET);
> +	value |= (VIDCH3CLK | VIDCH2CLK);
> +	__raw_writel(value, base + VSCLKDIS_OFFSET);
> +
> +	val = i2c_smbus_read_byte(cpld_client);
> +	if (val < 0)
> +		return val;
> +
> +	if (mux_mode == 1)
> +		val &= ~0x40;
> +	else
> +		val |= 0x40;
> +
> +	err = i2c_smbus_write_byte(cpld_client, val);
> +	if (err)
> +		return err;
> +
> +	value = __raw_readl(base + VIDCLKCTL_OFFSET);
> +	value &= ~(VCH2CLK_MASK);
> +	value &= ~(VCH3CLK_MASK);
> +
> +	if (hd >= 1)
> +		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
> +	else
> +		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
> +
> +	__raw_writel(value, base + VIDCLKCTL_OFFSET);
> +
> +	/* enable the clock */
> +	value = __raw_readl(base + VSCLKDIS_OFFSET);
> +	value &= ~(VIDCH3CLK | VIDCH2CLK);
> +	__raw_writel(value, base + VSCLKDIS_OFFSET);
> +
> +	return 0;
> +}
> +
> +static const struct subdev_info dm646x_vpif_subdev[] = {
> +	{
> +		.addr	= 0x2A,
> +		.name	= "adv7343",
> +	},
> +	{
> +		.addr	= 0x2C,
> +		.name	= "ths7303",
> +	},
> +};
> +
> +static const char *output[] = {
> +	"Composite",
> +	"Component",
> +	"S-Video",
> +};
> +
> +static struct vpif_config dm646x_vpif_config = {
> +	.set_clock	= set_vpif_clock,
> +	.subdevinfo	= dm646x_vpif_subdev,
> +	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
> +	.output		= output,
> +	.output_count	= ARRAY_SIZE(output),
> +	.card_name	= "DM646x EVM",
> +};
> +
>  static void __init evm_init_i2c(void)
>  {
>  	davinci_init_i2c(&i2c_pdata);
>  	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
> +	evm_init_cpld();
>  }
>  
>  static void __init davinci_map_io(void) @@ -276,6 +400,7 @@ static __init
void evm_init(void)
>  
>  	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
>  	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
> +	dm646x_setup_vpif(&dm646x_vpif_config);
>  }
>  
>  static __init void davinci_dm646x_evm_irq_init(void) diff --git
a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index
df82ee5..c5e2788 100644
> --- a/arch/arm/mach-davinci/dm646x.c
> +++ b/arch/arm/mach-davinci/dm646x.c
> @@ -32,6 +32,15 @@
>  #include "clock.h"
>  #include "mux.h"
>  
> +#define DAVINCI_VPIF_BASE       (0x01C12000)
> +#define VDD3P3V_PWDN_OFFSET	(0x48)
> +#define VSCLKDIS_OFFSET		(0x6C)
> +
> +#define VDD3P3V_VID_MASK	(BIT_MASK(7) | BIT_MASK(6) | BIT_MASK(5) |\
> +					BIT_MASK(4))
> +#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) |
BIT_MASK(9) |\
> +					BIT_MASK(8))
> +
>  /*
>   * Device specific clocks
>   */
> @@ -648,6 +657,37 @@ static struct platform_device dm646x_dit_device = {
>  	.id	= -1,
>  };
>  
> +static u64 vpif_dma_mask = DMA_BIT_MASK(32);
> +
> +static struct resource vpif_resource[] = {
> +	{
> +		.start	= DAVINCI_VPIF_BASE,
> +		.end	= DAVINCI_VPIF_BASE + 0x03fff,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	{
> +		.start = IRQ_DM646X_VP_VERTINT2,
> +		.end   = IRQ_DM646X_VP_VERTINT2,
> +		.flags = IORESOURCE_IRQ,
> +	},
> +	{
> +		.start = IRQ_DM646X_VP_VERTINT3,
> +		.end   = IRQ_DM646X_VP_VERTINT3,
> +		.flags = IORESOURCE_IRQ,
> +	},
> +};
> +
> +static struct platform_device vpif_display_dev = {
> +	.name		= "vpif_display",
> +	.id		= -1,
> +	.dev		= {
> +			.dma_mask 		= &vpif_dma_mask,
> +			.coherent_dma_mask	= DMA_BIT_MASK(32),
> +	},
> +	.resource	= vpif_resource,
> +	.num_resources	= ARRAY_SIZE(vpif_resource),
> +};
> +
>
/*----------------------------------------------------------------------*/
>  
>  static struct map_desc dm646x_io_desc[] = { @@ -770,6 +810,28 @@ void
__init dm646x_init_mcasp1(struct snd_platform_data *pdata)
>  	platform_device_register(&dm646x_dit_device);
>  }
>  
> +void dm646x_setup_vpif(struct vpif_config *config) {
> +	unsigned int value;
> +	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
> +
> +	value = __raw_readl(base + VSCLKDIS_OFFSET);
> +	value &= ~VSCLKDIS_MASK;
> +	__raw_writel(value, base + VSCLKDIS_OFFSET);
> +
> +	value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
> +	value &= ~VDD3P3V_VID_MASK;
> +	__raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
> +
> +	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
> +	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
> +	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
> +	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
> +
> +	vpif_display_dev.dev.platform_data = config;
> +	platform_device_register(&vpif_display_dev);
> +}
> +
>  void __init dm646x_init(void)
>  {
>  	davinci_common_init(&davinci_soc_info_dm646x);
> diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h
b/arch/arm/mach-davinci/include/mach/dm646x.h
> index 0585484..1f247fb 100644
> --- a/arch/arm/mach-davinci/include/mach/dm646x.h
> +++ b/arch/arm/mach-davinci/include/mach/dm646x.h
> @@ -26,4 +26,28 @@ void __init dm646x_init(void);  void __init
dm646x_init_mcasp0(struct snd_platform_data *pdata);  void __init
dm646x_init_mcasp1(struct snd_platform_data *pdata);
>  
> +void dm646x_video_init(void);
> +
> +struct vpif_output {
> +	u16 id;
> +	const char *name;
> +};
> +
> +struct subdev_info {
> +	unsigned short addr;
> +	const char *name;
> +};
> +
> +struct vpif_config {
> +	int (*set_clock)(int, int);
> +	const struct subdev_info *subdevinfo;
> +	int subdev_count;
> +	const char **output;
> +	int output_count;
> +	const char *card_name;
> +};
> +
> +
> +void dm646x_setup_vpif(struct vpif_config *config);
> +
>  #endif /* __ASM_ARCH_DM646X_H */
> --
> 1.5.6
> 




  reply	other threads:[~2009-07-15  4:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-07 11:52 [PATCH v2] ARM: DaVinci: DM646x Video: Platform and board specific setup Chaithrika U S
2009-07-15  4:15 ` chaithrika [this message]
2009-07-19 10:42 ` Russell King - ARM Linux
2009-07-20  6:08   ` chaithrika

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='002e01ca0502$d5353d30$7f9fb790$@com' \
    --to=chaithrika@ti.com \
    --cc=brijesh.j@ti.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=hverkuil@xs4all.nl \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mchehab@infradead.org \
    --cc=mrh@ti.com \
    --cc=rmk@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.