* [lm-sensors] lm85 in Intel S3000AH case
@ 2008-01-12 22:28 Andrew Voznytsa
2008-01-14 17:04 ` Jean Delvare
2008-01-14 17:18 ` Andrew Voznytsa
0 siblings, 2 replies; 3+ messages in thread
From: Andrew Voznytsa @ 2008-01-12 22:28 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1.1: Type: text/plain, Size: 1298 bytes --]
Hi guys,
Just installed lm-sensors (2.10.4 and 3.0.0) on S3000AH-based system (Linux
version 2.6.23-gentoo-r3 (root@farm) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0
.2)), x86_64) - works fine except lm-sensors does not show fans 5 and 6. Is
it fixable? (I'd leave my chassis fan connected to 5th socket and do not
reconnect it to 2-4)
Here is part of sensors-detect output
Detects correctly:
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x2e
Chip `SMSC EMC6D100, EMC6D101 or EMC6D102' (confidence: 7)
And sensors output:
lm85-i2c-0-2e
Adapter: SMBus I801 adapter at 3000
V1.5: +2.29 V (min = +0.00 V, max = +3.32 V)
VCore: +1.14 V (min = +0.00 V, max = +2.99 V)
V3.3: +3.35 V (min = +0.00 V, max = +4.38 V)
V5: +1.51 V (min = +0.00 V, max = +6.64 V)
V12: +12.81 V (min = +0.00 V, max = +15.94 V)
CPU_Fan: 1769 RPM (min = 720 RPM)
fan2: 0 RPM (min = 720 RPM)
fan3: 0 RPM (min = 720 RPM)
fan4: 0 RPM (min = 720 RPM)
CPU Temp: -63.0 C (low = -127.0 C, high = +127.0 C)
Board Temp: +39.0 C (low = -127.0 C, high = +127.0 C)
DIMM Temp: +29.0 C (low = -127.0 C, high = +127.0 C)
cpu0_vid: +0.000 V
Best regards,
Andrew Voznytsa
[-- Attachment #1.2: Type: text/html, Size: 6871 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] lm85 in Intel S3000AH case
2008-01-12 22:28 [lm-sensors] lm85 in Intel S3000AH case Andrew Voznytsa
@ 2008-01-14 17:04 ` Jean Delvare
2008-01-14 17:18 ` Andrew Voznytsa
1 sibling, 0 replies; 3+ messages in thread
From: Jean Delvare @ 2008-01-14 17:04 UTC (permalink / raw)
To: lm-sensors
Hi Andrew,
On Sun, 13 Jan 2008 00:28:08 +0200, Andrew Voznytsa wrote:
> Just installed lm-sensors (2.10.4 and 3.0.0) on S3000AH-based system (Linux
> version 2.6.23-gentoo-r3 (root@farm) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0
> .2)), x86_64) - works fine except lm-sensors does not show fans 5 and 6. Is
> it fixable? (I'd leave my chassis fan connected to 5th socket and do not
> reconnect it to 2-4)
The LM85 and compatible chips only have 4 fan inputs. If your board has
more than 4 fan headers, either some of them can't be monitored, or you
have second chip on your board to handle them. Best is to take a look
at what the BIOS displays. If the BIOS displays all 6 fans, there must
be another sensor chip on your board; if it displays only 4, it means
that the remaining 2 can't be monitored.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] lm85 in Intel S3000AH case
2008-01-12 22:28 [lm-sensors] lm85 in Intel S3000AH case Andrew Voznytsa
2008-01-14 17:04 ` Jean Delvare
@ 2008-01-14 17:18 ` Andrew Voznytsa
1 sibling, 0 replies; 3+ messages in thread
From: Andrew Voznytsa @ 2008-01-14 17:18 UTC (permalink / raw)
To: lm-sensors
Hi Jean,
>
> On Sun, 13 Jan 2008 00:28:08 +0200, Andrew Voznytsa wrote:
> > Just installed lm-sensors (2.10.4 and 3.0.0) on S3000AH-based system
> (Linux
> > version 2.6.23-gentoo-r3 (root@farm) (gcc version 4.1.2 (Gentoo 4.1.2
> p1.0
> > .2)), x86_64) - works fine except lm-sensors does not show fans 5 and 6.
> Is
> > it fixable? (I'd leave my chassis fan connected to 5th socket and do not
> > reconnect it to 2-4)
>
> The LM85 and compatible chips only have 4 fan inputs. If your board has
> more than 4 fan headers, either some of them can't be monitored, or you
> have second chip on your board to handle them. Best is to take a look
> at what the BIOS displays. If the BIOS displays all 6 fans, there must
> be another sensor chip on your board; if it displays only 4, it means
> that the remaining 2 can't be monitored.
>
BIOS shows 6 fans. This is system is not production system for now so I can
test some software there. If anyone is interested to make lm-sensors fully
compatible with S3000AH board then I'd help with testing.
lspci -v output follows:
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 1
Capabilities: [a0] Power Management version 2
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: Intel Corporation 82801GR/GH/GHM (ICH7
Family) PCI Express Port 5
Capabilities: [a0] Power Management version 2
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e8100000-e81fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: Intel Corporation 82801GR/GH/GHM (ICH7
Family) PCI Express Port 6
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 3080 [size2]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 3060 [size2]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 3040 [size2]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 3020 [size2]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at e8200400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01
[Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x04, subordinate\x04, sec-latency2
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e8000000-e80fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e7ffffff
Capabilities: [50] Subsystem: Intel Corporation Unknown device 348e
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface
Bridge (rev 01)
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
(rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 30b0 [size\x16]
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 30c8 [size=8]
I/O ports at 30e4 [size=4]
I/O ports at 30c0 [size=8]
I/O ports at 30e0 [size=4]
I/O ports at 30a0 [size\x16]
Memory at e8200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
01)
Subsystem: Intel Corporation Unknown device 348e
Flags: medium devsel, IRQ 19
I/O ports at 3000 [size2]
03:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet
Controller (Copper) (rev 03)
Subsystem: Intel Corporation Unknown device 348f
Flags: bus master, fast devsel, latency 0, IRQ 380
Memory at e8180000 (32-bit, non-prefetchable) [size\x128K]
Memory at e8100000 (32-bit, non-prefetchable) [sizeQ2K]
I/O ports at 2000 [size2]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
Capabilities: [e0] Express Endpoint, MSI 00
03:00.3 Serial controller: Intel Corporation Active Management Technology -
SOL (rev 03) (prog-if 02 [16550])
Subsystem: Intel Corporation Unknown device 0000
Flags: bus master, fast devsel, latency 0, IRQ 19
I/O ports at 2020 [size=8]
Memory at e81a1000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [e0] Express Endpoint, MSI 00
03:00.4 Serial bus controller [0c07]: Intel Corporation 82573E KCS (Active
Management) (rev 03) (prog-if 01)
Subsystem: Intel Corporation Unknown device 0000
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at e81a0000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 2028 [size=4]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [e0] Express Endpoint, MSI 00
04:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
(prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 348e
Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
Memory at e0000000 (32-bit, prefetchable) [size\x128M]
I/O ports at 1000 [size%6]
Memory at e8040000 (32-bit, non-prefetchable) [sizedK]
Expansion ROM at fffe0000 [disabled] [size\x128K]
Capabilities: [50] Power Management version 2
04:05.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
Controller (rev 05)
Subsystem: Intel Corporation Unknown device 348f
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
Memory at e8020000 (32-bit, non-prefetchable) [size\x128K]
Memory at e8000000 (32-bit, non-prefetchable) [size\x128K]
I/O ports at 1100 [sized]
Expansion ROM at e8060000 [disabled] [size\x128K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Best regards,
Andrew Voznytsa
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-01-14 17:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-12 22:28 [lm-sensors] lm85 in Intel S3000AH case Andrew Voznytsa
2008-01-14 17:04 ` Jean Delvare
2008-01-14 17:18 ` Andrew Voznytsa
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.