* [ath9k-devel] ar9280 PCIe 5/10MHz support
@ 2010-10-08 23:26 Hasan Rashid
2010-10-11 22:06 ` Pavel Roskin
0 siblings, 1 reply; 2+ messages in thread
From: Hasan Rashid @ 2010-10-08 23:26 UTC (permalink / raw)
To: ath9k-devel
Hi,
I am using ath9k on UBNT's NanoStations flashed with an OpenWRT image. Does
ath9k support 5 or 10 MHz operation on AR9280 chips in AP mode? UBNT's stock
firmware allows this.
Searching online I found Robert and Luis's emails but they didn't lead me to
any concrete information.
I have been experimenting with 0x5428 and 0x9428 as the PLL values for
Merlin 2.0 but in the code I see that its setting the PLL to a "magic" value
of 0x2850.
Thanks in advance!
- Hasan R.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20101008/a8188591/attachment-0001.htm
^ permalink raw reply [flat|nested] 2+ messages in thread
* [ath9k-devel] ar9280 PCIe 5/10MHz support
2010-10-08 23:26 [ath9k-devel] ar9280 PCIe 5/10MHz support Hasan Rashid
@ 2010-10-11 22:06 ` Pavel Roskin
0 siblings, 0 replies; 2+ messages in thread
From: Pavel Roskin @ 2010-10-11 22:06 UTC (permalink / raw)
To: ath9k-devel
On 10/08/2010 07:26 PM, Hasan Rashid wrote:
>
> I am using ath9k on UBNT's NanoStations flashed with an OpenWRT image. Does
> ath9k support 5 or 10 MHz operation on AR9280 chips in AP mode? UBNT's stock
> firmware allows this.
As far as I know, narrow channels are not supported by mac80211 and
nobody is working on this. If it's not supported by mac80211, it cannot
be properly supported by ath9k.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-10-11 22:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-08 23:26 [ath9k-devel] ar9280 PCIe 5/10MHz support Hasan Rashid
2010-10-11 22:06 ` Pavel Roskin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.