[U-Boot-Users] mx31 litekit help

[U-Boot-Users] mx31 litekit help

[Nathan Manning]

Hello,

I am currently trying to get u-boot to work on our mx31 litekit from logic
pd. Everything is compiling just fine and we are able to load our board with
our BDI3000, but executing u-boot doesn't result in the u-boot prompt or
anything else.

I noticed that the litektit's config.mk file has a TEXT_BASE of 0x87f00000
which doesn't correspond to our board's flash range. Is this really where
u-boot should be loaded?

Thanks for any help as I am new to U-boot.

Sincerely,
Nathan Manning
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 4708 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080721/88cbc95e/attachment.bin 

[U-Boot-Users] mx31 litekit help

[Fabio Estevam]

Hi Nathan,

--- On Mon, 7/21/08, Nathan Manning <manning@spawar.navy.mil> wrote:
> I noticed that the litektit's config.mk file has a
> TEXT_BASE of 0x87f00000
> which doesn't correspond to our board's flash
> range. Is this really where
> u-boot should be loaded?

0x87F0000 is an address in RAM, not flash.

Regards,

Fabio Estevam