* (unknown),
@ 2005-09-06 7:15 Riccardo Castellani
2005-09-06 7:59 ` Stefan
0 siblings, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-06 7:15 UTC (permalink / raw)
To: linux-ide
My HD supports U-ATA 133 while motherboard supports U-ATA 100. (Fedora Core
3)
DMA works at 33 Mhz (UDMA2) !?!
WHY ? How Can I set to UDMA5 ?
With "hdparm -i /dev/hda" I can see:
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):
dmesg gives:
Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com) (gcc
version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fc570
ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000
ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030
ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable
ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
Initializing CPU#0
CPU 0 irqstacks, hard=c0447000 soft=c0446000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 798.270 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254828k/262080k available (2450k kernel code, 6572k reserved, 694k
data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 399k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050729
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1125948457.147:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key ACD1A80A1D789A78
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 180k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 9 for device 0000:00:0a.0
eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda5, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
parport_pc: VIA parallel port: io=0x378, irq=7
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03d60a0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-06 7:15 (unknown), Riccardo Castellani
@ 2005-09-06 7:59 ` Stefan
2005-09-06 8:27 ` Re: Riccardo Castellani
0 siblings, 1 reply; 2775+ messages in thread
From: Stefan @ 2005-09-06 7:59 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: linux-ide
Riccardo Castellani wrote:
> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
> (Fedora Core 3)
> DMA works at 33 Mhz (UDMA2) !?!
> WHY ? How Can I set to UDMA5 ?
To change to udma5 run:
hdparm -X udma5
>
>
> With "hdparm -i /dev/hda" I can see:
>
> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 *udma2
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive conforms to: (null):
Looks like the drive was switched to only support UDMA2, did you buy
this drive directly from store?
This drive can be set to only support udma2 with the help of maxtors
utility, this is sometimes needed to fix problems with older boards,
so if you bought this drive from someone, there is a chance, that this
person switched the udma mode for that drive.
If you got it directly from a store, then this should not be the case.
>
>
>
> dmesg gives:
>
> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
> EDT 2005
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 255MB LOWMEM available.
> Using x86 segment limits to approximate NX protection
> On node 0 totalpages: 65520
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 61424 pages, LIFO batch:31
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> ACPI: RSDP (v000 AMI ) @ 0x000fc570
> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000
> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030
> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
> enable ACPI
> ACPI: Disabling ACPI support
> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
> Built 1 zonelists
> Kernel command line: ro root=LABEL=/
> Initializing CPU#0
> CPU 0 irqstacks, hard=c0447000 soft=c0446000
> PID hash table entries: 1024 (order: 10, 16384 bytes)
> Detected 798.270 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
> 694k data, 180k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
> 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: Intel Pentium III (Coppermine) stepping 06
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> checking if image is initramfs... it is
> Freeing initrd memory: 399k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20050729
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> audit: initializing netlink socket (disabled)
> audit(1125948457.147:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key ACD1A80A1D789A78
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected VIA Apollo Pro 133 chipset
> agpgart: AGP aperture is 64M @ 0xe0000000
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:07.1
> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
> Probing IDE interface ide0...
> hda: Maxtor 6Y080L0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
> UDMA(33)
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.20
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 512 buckets, 16Kbytes
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Freeing unused kernel memory: 180k freed
> input: AT Translated Set 2 keyboard on isa0060/serio0
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: Disabled at runtime.
> SELinux: Unregistering netfilter hooks
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> 8139too Fast Ethernet driver 0.9.27
> PCI: Found IRQ 9 for device 0000:00:0a.0
> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
> eth0: Identified 8139 chip type 'RTL-8139C'
> USB Universal Host Controller Interface driver v2.2
> PCI: Found IRQ 11 for device 0000:00:07.2
> uhci_hcd 0000:00:07.2: UHCI Host Controller
> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> EXT3 FS on hda5, internal journal
> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
> parport_pc: VIA 686A/8231 detected
> parport_pc: probing current configuration
> parport_pc: Current parallel port base: 0x378
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> parport_pc: VIA parallel port: io=0x378, irq=7
> ieee1394: Initialized config rom entry `ip1394'
> ip_tables: (C) 2000-2002 Netfilter core team
> ip_tables: (C) 2000-2002 Netfilter core team
> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
> i2c /dev entries driver
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c03d60a0(lo)
> IPv6 over IPv4 tunneling driver
> eth0: no IPv6 routers present
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-06 7:59 ` Stefan
@ 2005-09-06 8:27 ` Riccardo Castellani
2005-09-06 11:00 ` Re: Stefan
0 siblings, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-06 8:27 UTC (permalink / raw)
To: Stefan, Riccardo Castellani; +Cc: linux-ide
I bought it directly from store.
Several weeks ago I had problems with IDE cable and I could see UDMA5 (with
"hdparm" command) inside UDMA modes list. UDMA was the current active mode.
Then I replaced 80- wire cable and I needed (for other reasons) again to
reinstall operating system FC3 and now I'm here.
----- Original Message -----
From: "Stefan" <gentoopower@yahoo.de>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: <linux-ide@vger.kernel.org>
Sent: Tuesday, September 06, 2005 9:59 AM
Subject: Re:
> Riccardo Castellani wrote:
>
>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>> (Fedora Core 3)
>> DMA works at 33 Mhz (UDMA2) !?!
>> WHY ? How Can I set to UDMA5 ?
>
> To change to udma5 run:
>
> hdparm -X udma5
>
>>
>>
>> With "hdparm -i /dev/hda" I can see:
>>
>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>> Config={ Fixed }
>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>> PIO modes: pio0 pio1 pio2 pio3 pio4
>> DMA modes: mdma0 mdma1 mdma2
>> UDMA modes: udma0 udma1 *udma2
>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>> Drive conforms to: (null):
>
>
> Looks like the drive was switched to only support UDMA2, did you buy
> this drive directly from store?
> This drive can be set to only support udma2 with the help of maxtors
> utility, this is sometimes needed to fix problems with older boards,
> so if you bought this drive from someone, there is a chance, that this
> person switched the udma mode for that drive.
> If you got it directly from a store, then this should not be the case.
>
>>
>>
>>
>> dmesg gives:
>>
>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>> EDT 2005
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>> 0MB HIGHMEM available.
>> 255MB LOWMEM available.
>> Using x86 segment limits to approximate NX protection
>> On node 0 totalpages: 65520
>> DMA zone: 4096 pages, LIFO batch:1
>> Normal zone: 61424 pages, LIFO batch:31
>> HighMem zone: 0 pages, LIFO batch:1
>> DMI 2.3 present.
>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000
>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030
>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>> enable ACPI
>> ACPI: Disabling ACPI support
>> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
>> Built 1 zonelists
>> Kernel command line: ro root=LABEL=/
>> Initializing CPU#0
>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>> Detected 798.270 MHz processor.
>> Using tsc for high-res timesource
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>> 694k data, 180k init, 0k highmem)
>> Checking if this processor honours the WP bit even in supervisor
>> mode... Ok.
>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>> Security Framework v1.0.0 initialized
>> SELinux: Initializing.
>> SELinux: Starting in permissive mode
>> selinux_register_security: Registering secondary module capability
>> Capability LSM initialized as secondary
>> Mount-cache hash table entries: 512
>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>> 00000000 00000000 00000000
>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>> 00000000 00000000 00000000
>> CPU: L1 I cache: 16K, L1 D cache: 16K
>> CPU: L2 cache: 256K
>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>> 00000000 00000000 00000000
>> Intel machine check architecture supported.
>> Intel machine check reporting enabled on CPU#0.
>> CPU: Intel Pentium III (Coppermine) stepping 06
>> Enabling fast FPU save and restore... done.
>> Enabling unmasked SIMD FPU exception support... done.
>> Checking 'hlt' instruction... OK.
>> checking if image is initramfs... it is
>> Freeing initrd memory: 399k freed
>> NET: Registered protocol family 16
>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>> PCI: Using configuration type 1
>> mtrr: v2.0 (20020519)
>> ACPI: Subsystem revision 20050729
>> ACPI: Interpreter disabled.
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI: disabled
>> usbcore: registered new driver usbfs
>> usbcore: registered new driver hub
>> PCI: Probing PCI hardware
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>> audit: initializing netlink socket (disabled)
>> audit(1125948457.147:1): initialized
>> Total HugeTLB memory allocated, 0
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> SELinux: Registering netfilter hooks
>> Initializing Cryptographic API
>> ksign: Installing public key data
>> Loading keyring
>> - Added public key ACD1A80A1D789A78
>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> isapnp: Scanning for PnP cards...
>> isapnp: No Plug & Play device found
>> Real Time Clock Driver v1.12
>> Linux agpgart interface v0.101 (c) Dave Jones
>> agpgart: Detected VIA Apollo Pro 133 chipset
>> agpgart: AGP aperture is 64M @ 0xe0000000
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered
>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>> VP_IDE: chipset revision 6
>> VP_IDE: not 100% native mode: will probe irqs later
>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>> Probing IDE interface ide0...
>> hda: Maxtor 6Y080L0, ATA DISK drive
>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>> Probing IDE interface ide1...
>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>> ide1 at 0x170-0x177,0x376 on irq 15
>> hda: max request size: 128KiB
>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>> UDMA(33)
>> hda: cache flushes supported
>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>> Uniform CD-ROM driver Revision: 3.20
>> ide-floppy driver 0.99.newide
>> usbcore: registered new driver hiddev
>> usbcore: registered new driver usbhid
>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>> mice: PS/2 mouse device common for all mice
>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>> NET: Registered protocol family 2
>> IP: routing cache hash table of 512 buckets, 16Kbytes
>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>> TCP: Hash tables configured (established 16384 bind 16384)
>> Initializing IPsec netlink socket
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> Freeing unused kernel memory: 180k freed
>> input: AT Translated Set 2 keyboard on isa0060/serio0
>> kjournald starting. Commit interval 5 seconds
>> EXT3-fs: mounted filesystem with ordered data mode.
>> SELinux: Disabled at runtime.
>> SELinux: Unregistering netfilter hooks
>> Floppy drive(s): fd0 is 1.44M
>> FDC 0 is a post-1991 82077
>> 8139too Fast Ethernet driver 0.9.27
>> PCI: Found IRQ 9 for device 0000:00:0a.0
>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>> eth0: Identified 8139 chip type 'RTL-8139C'
>> USB Universal Host Controller Interface driver v2.2
>> PCI: Found IRQ 11 for device 0000:00:07.2
>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 2 ports detected
>> md: Autodetecting RAID arrays.
>> md: autorun ...
>> md: ... autorun DONE.
>> EXT3 FS on hda5, internal journal
>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda1, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda2, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda8, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda3, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>> parport_pc: VIA 686A/8231 detected
>> parport_pc: probing current configuration
>> parport_pc: Current parallel port base: 0x378
>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>> parport_pc: VIA parallel port: io=0x378, irq=7
>> ieee1394: Initialized config rom entry `ip1394'
>> ip_tables: (C) 2000-2002 Netfilter core team
>> ip_tables: (C) 2000-2002 Netfilter core team
>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>> i2c /dev entries driver
>> NET: Registered protocol family 10
>> Disabled Privacy Extensions on device c03d60a0(lo)
>> IPv6 over IPv4 tunneling driver
>> eth0: no IPv6 routers present
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
> anmelden: http://mail.yahoo.de
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-06 8:27 ` Re: Riccardo Castellani
@ 2005-09-06 11:00 ` Stefan
2005-09-07 8:30 ` Re: Riccardo Castellani
0 siblings, 1 reply; 2775+ messages in thread
From: Stefan @ 2005-09-06 11:00 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: linux-ide
Riccardo Castellani wrote:
> I bought it directly from store.
> Several weeks ago I had problems with IDE cable and I could see UDMA5
> (with "hdparm" command) inside UDMA modes list. UDMA was the current
> active mode.
> Then I replaced 80- wire cable and I needed (for other reasons) again
> to reinstall operating system FC3 and now I'm here.
Well you probably answered the question yourself now, you must have
installed a cable only capable of udma2/udma 33.
The older ide cables have sligthly thicker lines than the >udma2 cables,
they have the same connector and of course there are mire connected pins
on the >udma2
cables but you don't see that if looking at the connector.
>
> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> Cc: <linux-ide@vger.kernel.org>
> Sent: Tuesday, September 06, 2005 9:59 AM
> Subject: Re:
>
>
>> Riccardo Castellani wrote:
>>
>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>> (Fedora Core 3)
>>> DMA works at 33 Mhz (UDMA2) !?!
>>> WHY ? How Can I set to UDMA5 ?
>>
>>
>> To change to udma5 run:
>>
>> hdparm -X udma5
>>
>>>
>>>
>>> With "hdparm -i /dev/hda" I can see:
>>>
>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>> Config={ Fixed }
>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>> DMA modes: mdma0 mdma1 mdma2
>>> UDMA modes: udma0 udma1 *udma2
>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>> Drive conforms to: (null):
>>
>>
>>
>> Looks like the drive was switched to only support UDMA2, did you buy
>> this drive directly from store?
>> This drive can be set to only support udma2 with the help of maxtors
>> utility, this is sometimes needed to fix problems with older boards,
>> so if you bought this drive from someone, there is a chance, that this
>> person switched the udma mode for that drive.
>> If you got it directly from a store, then this should not be the case.
>>
>>>
>>>
>>>
>>> dmesg gives:
>>>
>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>> EDT 2005
>>> BIOS-provided physical RAM map:
>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>> 0MB HIGHMEM available.
>>> 255MB LOWMEM available.
>>> Using x86 segment limits to approximate NX protection
>>> On node 0 totalpages: 65520
>>> DMA zone: 4096 pages, LIFO batch:1
>>> Normal zone: 61424 pages, LIFO batch:31
>>> HighMem zone: 0 pages, LIFO batch:1
>>> DMI 2.3 present.
>>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>> 0x0fff0000
>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>> 0x0fff0030
>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>> 0x00000000
>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>>> enable ACPI
>>> ACPI: Disabling ACPI support
>>> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
>>> Built 1 zonelists
>>> Kernel command line: ro root=LABEL=/
>>> Initializing CPU#0
>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>> Detected 798.270 MHz processor.
>>> Using tsc for high-res timesource
>>> Console: colour VGA+ 80x25
>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>>> 694k data, 180k init, 0k highmem)
>>> Checking if this processor honours the WP bit even in supervisor
>>> mode... Ok.
>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>> Security Framework v1.0.0 initialized
>>> SELinux: Initializing.
>>> SELinux: Starting in permissive mode
>>> selinux_register_security: Registering secondary module capability
>>> Capability LSM initialized as secondary
>>> Mount-cache hash table entries: 512
>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>>> 00000000 00000000 00000000
>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>>> 00000000 00000000 00000000
>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>> CPU: L2 cache: 256K
>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>> 00000000 00000000 00000000
>>> Intel machine check architecture supported.
>>> Intel machine check reporting enabled on CPU#0.
>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>> Enabling fast FPU save and restore... done.
>>> Enabling unmasked SIMD FPU exception support... done.
>>> Checking 'hlt' instruction... OK.
>>> checking if image is initramfs... it is
>>> Freeing initrd memory: 399k freed
>>> NET: Registered protocol family 16
>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>> PCI: Using configuration type 1
>>> mtrr: v2.0 (20020519)
>>> ACPI: Subsystem revision 20050729
>>> ACPI: Interpreter disabled.
>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>> pnp: PnP ACPI: disabled
>>> usbcore: registered new driver usbfs
>>> usbcore: registered new driver hub
>>> PCI: Probing PCI hardware
>>> PCI: Probing PCI hardware (bus 00)
>>> Boot video device is 0000:01:00.0
>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>> audit: initializing netlink socket (disabled)
>>> audit(1125948457.147:1): initialized
>>> Total HugeTLB memory allocated, 0
>>> VFS: Disk quotas dquot_6.5.1
>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>> SELinux: Registering netfilter hooks
>>> Initializing Cryptographic API
>>> ksign: Installing public key data
>>> Loading keyring
>>> - Added public key ACD1A80A1D789A78
>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>> isapnp: Scanning for PnP cards...
>>> isapnp: No Plug & Play device found
>>> Real Time Clock Driver v1.12
>>> Linux agpgart interface v0.101 (c) Dave Jones
>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>> PNP: No PS/2 controller found. Probing ports directly.
>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>> enabled
>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>> io scheduler noop registered
>>> io scheduler anticipatory registered
>>> io scheduler deadline registered
>>> io scheduler cfq registered
>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>> idebus=xx
>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>> VP_IDE: chipset revision 6
>>> VP_IDE: not 100% native mode: will probe irqs later
>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>> pci0000:00:07.1
>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>> Probing IDE interface ide0...
>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>> Probing IDE interface ide1...
>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>> ide1 at 0x170-0x177,0x376 on irq 15
>>> hda: max request size: 128KiB
>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>> UDMA(33)
>>> hda: cache flushes supported
>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>> Uniform CD-ROM driver Revision: 3.20
>>> ide-floppy driver 0.99.newide
>>> usbcore: registered new driver hiddev
>>> usbcore: registered new driver usbhid
>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>> mice: PS/2 mouse device common for all mice
>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>> NET: Registered protocol family 2
>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>> TCP: Hash tables configured (established 16384 bind 16384)
>>> Initializing IPsec netlink socket
>>> NET: Registered protocol family 1
>>> NET: Registered protocol family 17
>>> Freeing unused kernel memory: 180k freed
>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> SELinux: Disabled at runtime.
>>> SELinux: Unregistering netfilter hooks
>>> Floppy drive(s): fd0 is 1.44M
>>> FDC 0 is a post-1991 82077
>>> 8139too Fast Ethernet driver 0.9.27
>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>> USB Universal Host Controller Interface driver v2.2
>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>> hub 1-0:1.0: USB hub found
>>> hub 1-0:1.0: 2 ports detected
>>> md: Autodetecting RAID arrays.
>>> md: autorun ...
>>> md: ... autorun DONE.
>>> EXT3 FS on hda5, internal journal
>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>> dm-devel@redhat.com
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda1, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda2, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda8, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda3, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>> parport_pc: VIA 686A/8231 detected
>>> parport_pc: probing current configuration
>>> parport_pc: Current parallel port base: 0x378
>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>> ieee1394: Initialized config rom entry `ip1394'
>>> ip_tables: (C) 2000-2002 Netfilter core team
>>> ip_tables: (C) 2000-2002 Netfilter core team
>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>> i2c /dev entries driver
>>> NET: Registered protocol family 10
>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>> IPv6 over IPv4 tunneling driver
>>> eth0: no IPv6 routers present
>>> -
>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>>
>>
>>
>>
>>
>> ___________________________________________________________
>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>> anmelden: http://mail.yahoo.de
>>
>
>
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-06 11:00 ` Re: Stefan
@ 2005-09-07 8:30 ` Riccardo Castellani
2005-09-07 9:28 ` Re: Erik Slagter
2005-09-08 1:21 ` Stefan
0 siblings, 2 replies; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-07 8:30 UTC (permalink / raw)
To: Stefan, Riccardo Castellani; +Cc: linux-ide
I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE cable".
----- Original Message -----
From: "Stefan" <gentoopower@yahoo.de>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: <linux-ide@vger.kernel.org>
Sent: Tuesday, September 06, 2005 1:00 PM
Subject: Re:
> Riccardo Castellani wrote:
>
>> I bought it directly from store.
>> Several weeks ago I had problems with IDE cable and I could see UDMA5
>> (with "hdparm" command) inside UDMA modes list. UDMA was the current
>> active mode.
>> Then I replaced 80- wire cable and I needed (for other reasons) again
>> to reinstall operating system FC3 and now I'm here.
>
> Well you probably answered the question yourself now, you must have
> installed a cable only capable of udma2/udma 33.
> The older ide cables have sligthly thicker lines than the >udma2 cables,
> they have the same connector and of course there are mire connected pins
> on the >udma2
> cables but you don't see that if looking at the connector.
>
>>
>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>> Cc: <linux-ide@vger.kernel.org>
>> Sent: Tuesday, September 06, 2005 9:59 AM
>> Subject: Re:
>>
>>
>>> Riccardo Castellani wrote:
>>>
>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>> (Fedora Core 3)
>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>> WHY ? How Can I set to UDMA5 ?
>>>
>>>
>>> To change to udma5 run:
>>>
>>> hdparm -X udma5
>>>
>>>>
>>>>
>>>> With "hdparm -i /dev/hda" I can see:
>>>>
>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>> Config={ Fixed }
>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>> DMA modes: mdma0 mdma1 mdma2
>>>> UDMA modes: udma0 udma1 *udma2
>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>> Drive conforms to: (null):
>>>
>>>
>>>
>>> Looks like the drive was switched to only support UDMA2, did you buy
>>> this drive directly from store?
>>> This drive can be set to only support udma2 with the help of maxtors
>>> utility, this is sometimes needed to fix problems with older boards,
>>> so if you bought this drive from someone, there is a chance, that this
>>> person switched the udma mode for that drive.
>>> If you got it directly from a store, then this should not be the case.
>>>
>>>>
>>>>
>>>>
>>>> dmesg gives:
>>>>
>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>>> EDT 2005
>>>> BIOS-provided physical RAM map:
>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>> 0MB HIGHMEM available.
>>>> 255MB LOWMEM available.
>>>> Using x86 segment limits to approximate NX protection
>>>> On node 0 totalpages: 65520
>>>> DMA zone: 4096 pages, LIFO batch:1
>>>> Normal zone: 61424 pages, LIFO batch:31
>>>> HighMem zone: 0 pages, LIFO batch:1
>>>> DMI 2.3 present.
>>>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>> 0x0fff0000
>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>> 0x0fff0030
>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>> 0x00000000
>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>>>> enable ACPI
>>>> ACPI: Disabling ACPI support
>>>> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
>>>> Built 1 zonelists
>>>> Kernel command line: ro root=LABEL=/
>>>> Initializing CPU#0
>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>> Detected 798.270 MHz processor.
>>>> Using tsc for high-res timesource
>>>> Console: colour VGA+ 80x25
>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>>>> 694k data, 180k init, 0k highmem)
>>>> Checking if this processor honours the WP bit even in supervisor
>>>> mode... Ok.
>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>> Security Framework v1.0.0 initialized
>>>> SELinux: Initializing.
>>>> SELinux: Starting in permissive mode
>>>> selinux_register_security: Registering secondary module capability
>>>> Capability LSM initialized as secondary
>>>> Mount-cache hash table entries: 512
>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>>>> 00000000 00000000 00000000
>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>>>> 00000000 00000000 00000000
>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>> CPU: L2 cache: 256K
>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>> 00000000 00000000 00000000
>>>> Intel machine check architecture supported.
>>>> Intel machine check reporting enabled on CPU#0.
>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>> Enabling fast FPU save and restore... done.
>>>> Enabling unmasked SIMD FPU exception support... done.
>>>> Checking 'hlt' instruction... OK.
>>>> checking if image is initramfs... it is
>>>> Freeing initrd memory: 399k freed
>>>> NET: Registered protocol family 16
>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>> PCI: Using configuration type 1
>>>> mtrr: v2.0 (20020519)
>>>> ACPI: Subsystem revision 20050729
>>>> ACPI: Interpreter disabled.
>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>> pnp: PnP ACPI: disabled
>>>> usbcore: registered new driver usbfs
>>>> usbcore: registered new driver hub
>>>> PCI: Probing PCI hardware
>>>> PCI: Probing PCI hardware (bus 00)
>>>> Boot video device is 0000:01:00.0
>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>> audit: initializing netlink socket (disabled)
>>>> audit(1125948457.147:1): initialized
>>>> Total HugeTLB memory allocated, 0
>>>> VFS: Disk quotas dquot_6.5.1
>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>> SELinux: Registering netfilter hooks
>>>> Initializing Cryptographic API
>>>> ksign: Installing public key data
>>>> Loading keyring
>>>> - Added public key ACD1A80A1D789A78
>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>> isapnp: Scanning for PnP cards...
>>>> isapnp: No Plug & Play device found
>>>> Real Time Clock Driver v1.12
>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>> enabled
>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>> io scheduler noop registered
>>>> io scheduler anticipatory registered
>>>> io scheduler deadline registered
>>>> io scheduler cfq registered
>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>> idebus=xx
>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>> VP_IDE: chipset revision 6
>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>> pci0000:00:07.1
>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>> Probing IDE interface ide0...
>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>> Probing IDE interface ide1...
>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>> hda: max request size: 128KiB
>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>>> UDMA(33)
>>>> hda: cache flushes supported
>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>> Uniform CD-ROM driver Revision: 3.20
>>>> ide-floppy driver 0.99.newide
>>>> usbcore: registered new driver hiddev
>>>> usbcore: registered new driver usbhid
>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>> mice: PS/2 mouse device common for all mice
>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>> NET: Registered protocol family 2
>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>> Initializing IPsec netlink socket
>>>> NET: Registered protocol family 1
>>>> NET: Registered protocol family 17
>>>> Freeing unused kernel memory: 180k freed
>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> SELinux: Disabled at runtime.
>>>> SELinux: Unregistering netfilter hooks
>>>> Floppy drive(s): fd0 is 1.44M
>>>> FDC 0 is a post-1991 82077
>>>> 8139too Fast Ethernet driver 0.9.27
>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>> USB Universal Host Controller Interface driver v2.2
>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>> hub 1-0:1.0: USB hub found
>>>> hub 1-0:1.0: 2 ports detected
>>>> md: Autodetecting RAID arrays.
>>>> md: autorun ...
>>>> md: ... autorun DONE.
>>>> EXT3 FS on hda5, internal journal
>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>> dm-devel@redhat.com
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda1, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda2, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda8, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda3, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>> parport_pc: VIA 686A/8231 detected
>>>> parport_pc: probing current configuration
>>>> parport_pc: Current parallel port base: 0x378
>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>> ieee1394: Initialized config rom entry `ip1394'
>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>> i2c /dev entries driver
>>>> NET: Registered protocol family 10
>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>> IPv6 over IPv4 tunneling driver
>>>> eth0: no IPv6 routers present
>>>> -
>>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ___________________________________________________________
>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>> anmelden: http://mail.yahoo.de
>>>
>>
>>
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
> anmelden: http://mail.yahoo.de
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: Re:
2005-09-07 8:30 ` Re: Riccardo Castellani
@ 2005-09-07 9:28 ` Erik Slagter
2005-09-07 10:13 ` UDMA5 not works ! Riccardo Castellani
2005-09-08 1:21 ` Stefan
1 sibling, 1 reply; 2775+ messages in thread
From: Erik Slagter @ 2005-09-07 9:28 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: Stefan, linux-ide
[-- Attachment #1: Type: text/plain, Size: 219 bytes --]
On Wed, 2005-09-07 at 10:30 +0200, Riccardo Castellani wrote:
> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE cable".
What happens if you use the cable you used previously (just for
testing)?
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: UDMA5 not works !
2005-09-07 9:28 ` Re: Erik Slagter
@ 2005-09-07 10:13 ` Riccardo Castellani
0 siblings, 0 replies; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-07 10:13 UTC (permalink / raw)
To: Erik Slagter, Riccardo Castellani; +Cc: Stefan, linux-ide
I can't use again the old cable because it was damaged.
----- Original Message -----
From: "Erik Slagter" <erik@slagter.name>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
Sent: Wednesday, September 07, 2005 11:28 AM
Subject: Re: Re:
On Wed, 2005-09-07 at 10:30 +0200, Riccardo Castellani wrote:
> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE cable".
What happens if you use the cable you used previously (just for
testing)?
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re:
2005-09-07 8:30 ` Re: Riccardo Castellani
2005-09-07 9:28 ` Re: Erik Slagter
@ 2005-09-08 1:21 ` Stefan
2005-09-08 7:21 ` Re: Riccardo Castellani
1 sibling, 1 reply; 2775+ messages in thread
From: Stefan @ 2005-09-08 1:21 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: linux-ide
What happens if you check udma level with a live cd like knoppix?
Riccardo Castellani wrote:
> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
> cable".
>
>
> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> Cc: <linux-ide@vger.kernel.org>
> Sent: Tuesday, September 06, 2005 1:00 PM
> Subject: Re:
>
>
>> Riccardo Castellani wrote:
>>
>>> I bought it directly from store.
>>> Several weeks ago I had problems with IDE cable and I could see UDMA5
>>> (with "hdparm" command) inside UDMA modes list. UDMA was the current
>>> active mode.
>>> Then I replaced 80- wire cable and I needed (for other reasons) again
>>> to reinstall operating system FC3 and now I'm here.
>>
>>
>> Well you probably answered the question yourself now, you must have
>> installed a cable only capable of udma2/udma 33.
>> The older ide cables have sligthly thicker lines than the >udma2 cables,
>> they have the same connector and of course there are mire connected pins
>> on the >udma2
>> cables but you don't see that if looking at the connector.
>>
>>>
>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>> Cc: <linux-ide@vger.kernel.org>
>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>> Subject: Re:
>>>
>>>
>>>> Riccardo Castellani wrote:
>>>>
>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>> (Fedora Core 3)
>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>> WHY ? How Can I set to UDMA5 ?
>>>>
>>>>
>>>>
>>>> To change to udma5 run:
>>>>
>>>> hdparm -X udma5
>>>>
>>>>>
>>>>>
>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>
>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>> Config={ Fixed }
>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>> UDMA modes: udma0 udma1 *udma2
>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>> Drive conforms to: (null):
>>>>
>>>>
>>>>
>>>>
>>>> Looks like the drive was switched to only support UDMA2, did you buy
>>>> this drive directly from store?
>>>> This drive can be set to only support udma2 with the help of maxtors
>>>> utility, this is sometimes needed to fix problems with older boards,
>>>> so if you bought this drive from someone, there is a chance, that this
>>>> person switched the udma mode for that drive.
>>>> If you got it directly from a store, then this should not be the case.
>>>>
>>>>>
>>>>>
>>>>>
>>>>> dmesg gives:
>>>>>
>>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>>>> EDT 2005
>>>>> BIOS-provided physical RAM map:
>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>> 0MB HIGHMEM available.
>>>>> 255MB LOWMEM available.
>>>>> Using x86 segment limits to approximate NX protection
>>>>> On node 0 totalpages: 65520
>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>> DMI 2.3 present.
>>>>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>> 0x0fff0000
>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>> 0x0fff0030
>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>> 0x00000000
>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>>>>> enable ACPI
>>>>> ACPI: Disabling ACPI support
>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>> 10000000:efff0000)
>>>>> Built 1 zonelists
>>>>> Kernel command line: ro root=LABEL=/
>>>>> Initializing CPU#0
>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>> Detected 798.270 MHz processor.
>>>>> Using tsc for high-res timesource
>>>>> Console: colour VGA+ 80x25
>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>>>>> 694k data, 180k init, 0k highmem)
>>>>> Checking if this processor honours the WP bit even in supervisor
>>>>> mode... Ok.
>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>> Security Framework v1.0.0 initialized
>>>>> SELinux: Initializing.
>>>>> SELinux: Starting in permissive mode
>>>>> selinux_register_security: Registering secondary module capability
>>>>> Capability LSM initialized as secondary
>>>>> Mount-cache hash table entries: 512
>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>> 00000000
>>>>> 00000000 00000000 00000000
>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>>>>> 00000000 00000000 00000000
>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>> CPU: L2 cache: 256K
>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>> 00000000 00000000 00000000
>>>>> Intel machine check architecture supported.
>>>>> Intel machine check reporting enabled on CPU#0.
>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>> Enabling fast FPU save and restore... done.
>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>> Checking 'hlt' instruction... OK.
>>>>> checking if image is initramfs... it is
>>>>> Freeing initrd memory: 399k freed
>>>>> NET: Registered protocol family 16
>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>> PCI: Using configuration type 1
>>>>> mtrr: v2.0 (20020519)
>>>>> ACPI: Subsystem revision 20050729
>>>>> ACPI: Interpreter disabled.
>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>> pnp: PnP ACPI: disabled
>>>>> usbcore: registered new driver usbfs
>>>>> usbcore: registered new driver hub
>>>>> PCI: Probing PCI hardware
>>>>> PCI: Probing PCI hardware (bus 00)
>>>>> Boot video device is 0000:01:00.0
>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>> audit: initializing netlink socket (disabled)
>>>>> audit(1125948457.147:1): initialized
>>>>> Total HugeTLB memory allocated, 0
>>>>> VFS: Disk quotas dquot_6.5.1
>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>> SELinux: Registering netfilter hooks
>>>>> Initializing Cryptographic API
>>>>> ksign: Installing public key data
>>>>> Loading keyring
>>>>> - Added public key ACD1A80A1D789A78
>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>> isapnp: Scanning for PnP cards...
>>>>> isapnp: No Plug & Play device found
>>>>> Real Time Clock Driver v1.12
>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>>> enabled
>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>> io scheduler noop registered
>>>>> io scheduler anticipatory registered
>>>>> io scheduler deadline registered
>>>>> io scheduler cfq registered
>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>> blocksize
>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>> idebus=xx
>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>> VP_IDE: chipset revision 6
>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>> pci0000:00:07.1
>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>>> Probing IDE interface ide0...
>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>> Probing IDE interface ide1...
>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>> hda: max request size: 128KiB
>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>>>> UDMA(33)
>>>>> hda: cache flushes supported
>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>> ide-floppy driver 0.99.newide
>>>>> usbcore: registered new driver hiddev
>>>>> usbcore: registered new driver usbhid
>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>> mice: PS/2 mouse device common for all mice
>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>> NET: Registered protocol family 2
>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>> Initializing IPsec netlink socket
>>>>> NET: Registered protocol family 1
>>>>> NET: Registered protocol family 17
>>>>> Freeing unused kernel memory: 180k freed
>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>> kjournald starting. Commit interval 5 seconds
>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>> SELinux: Disabled at runtime.
>>>>> SELinux: Unregistering netfilter hooks
>>>>> Floppy drive(s): fd0 is 1.44M
>>>>> FDC 0 is a post-1991 82077
>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>> USB Universal Host Controller Interface driver v2.2
>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>> hub 1-0:1.0: USB hub found
>>>>> hub 1-0:1.0: 2 ports detected
>>>>> md: Autodetecting RAID arrays.
>>>>> md: autorun ...
>>>>> md: ... autorun DONE.
>>>>> EXT3 FS on hda5, internal journal
>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>> dm-devel@redhat.com
>>>>> kjournald starting. Commit interval 5 seconds
>>>>> EXT3 FS on hda1, internal journal
>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>> kjournald starting. Commit interval 5 seconds
>>>>> EXT3 FS on hda2, internal journal
>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>> kjournald starting. Commit interval 5 seconds
>>>>> EXT3 FS on hda8, internal journal
>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>> kjournald starting. Commit interval 5 seconds
>>>>> EXT3 FS on hda3, internal journal
>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>> parport_pc: VIA 686A/8231 detected
>>>>> parport_pc: probing current configuration
>>>>> parport_pc: Current parallel port base: 0x378
>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>> i2c /dev entries driver
>>>>> NET: Registered protocol family 10
>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>> IPv6 over IPv4 tunneling driver
>>>>> eth0: no IPv6 routers present
>>>>> -
>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>> linux-ide" in
>>>>> the body of a message to majordomo@vger.kernel.org
>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ___________________________________________________________
>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>> anmelden: http://mail.yahoo.de
>>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>> ___________________________________________________________
>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>> anmelden: http://mail.yahoo.de
>>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-08 1:21 ` Stefan
@ 2005-09-08 7:21 ` Riccardo Castellani
2005-09-08 8:06 ` Re: Stefan
0 siblings, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-08 7:21 UTC (permalink / raw)
To: Stefan, Riccardo Castellani; +Cc: linux-ide
That's good idea ! I tried to Knoppix but it detects UDMA at 33 Mhz.
I read in mothearboard manual that it supports until to UDMA 100 Mhz
----- Original Message -----
From: "Stefan" <gentoopower@yahoo.de>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: <linux-ide@vger.kernel.org>
Sent: Thursday, September 08, 2005 3:21 AM
Subject: Re:
> What happens if you check udma level with a live cd like knoppix?
>
> Riccardo Castellani wrote:
>
>> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
>> cable".
>>
>>
>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>> Cc: <linux-ide@vger.kernel.org>
>> Sent: Tuesday, September 06, 2005 1:00 PM
>> Subject: Re:
>>
>>
>>> Riccardo Castellani wrote:
>>>
>>>> I bought it directly from store.
>>>> Several weeks ago I had problems with IDE cable and I could see UDMA5
>>>> (with "hdparm" command) inside UDMA modes list. UDMA was the current
>>>> active mode.
>>>> Then I replaced 80- wire cable and I needed (for other reasons) again
>>>> to reinstall operating system FC3 and now I'm here.
>>>
>>>
>>> Well you probably answered the question yourself now, you must have
>>> installed a cable only capable of udma2/udma 33.
>>> The older ide cables have sligthly thicker lines than the >udma2 cables,
>>> they have the same connector and of course there are mire connected pins
>>> on the >udma2
>>> cables but you don't see that if looking at the connector.
>>>
>>>>
>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>> Cc: <linux-ide@vger.kernel.org>
>>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>>> Subject: Re:
>>>>
>>>>
>>>>> Riccardo Castellani wrote:
>>>>>
>>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>>> (Fedora Core 3)
>>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>>> WHY ? How Can I set to UDMA5 ?
>>>>>
>>>>>
>>>>>
>>>>> To change to udma5 run:
>>>>>
>>>>> hdparm -X udma5
>>>>>
>>>>>>
>>>>>>
>>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>>
>>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>>> Config={ Fixed }
>>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
>>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
>>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>>> UDMA modes: udma0 udma1 *udma2
>>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>>> Drive conforms to: (null):
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Looks like the drive was switched to only support UDMA2, did you buy
>>>>> this drive directly from store?
>>>>> This drive can be set to only support udma2 with the help of maxtors
>>>>> utility, this is sometimes needed to fix problems with older boards,
>>>>> so if you bought this drive from someone, there is a chance, that this
>>>>> person switched the udma mode for that drive.
>>>>> If you got it directly from a store, then this should not be the case.
>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> dmesg gives:
>>>>>>
>>>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>>>>> EDT 2005
>>>>>> BIOS-provided physical RAM map:
>>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>>> 0MB HIGHMEM available.
>>>>>> 255MB LOWMEM available.
>>>>>> Using x86 segment limits to approximate NX protection
>>>>>> On node 0 totalpages: 65520
>>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>>> DMI 2.3 present.
>>>>>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>>> 0x0fff0000
>>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>>> 0x0fff0030
>>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>>> 0x00000000
>>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>>>>>> enable ACPI
>>>>>> ACPI: Disabling ACPI support
>>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>>> 10000000:efff0000)
>>>>>> Built 1 zonelists
>>>>>> Kernel command line: ro root=LABEL=/
>>>>>> Initializing CPU#0
>>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>>> Detected 798.270 MHz processor.
>>>>>> Using tsc for high-res timesource
>>>>>> Console: colour VGA+ 80x25
>>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>>>>>> 694k data, 180k init, 0k highmem)
>>>>>> Checking if this processor honours the WP bit even in supervisor
>>>>>> mode... Ok.
>>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>>> Security Framework v1.0.0 initialized
>>>>>> SELinux: Initializing.
>>>>>> SELinux: Starting in permissive mode
>>>>>> selinux_register_security: Registering secondary module capability
>>>>>> Capability LSM initialized as secondary
>>>>>> Mount-cache hash table entries: 512
>>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>>> 00000000
>>>>>> 00000000 00000000 00000000
>>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>>>>>> 00000000 00000000 00000000
>>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>>> CPU: L2 cache: 256K
>>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>>> 00000000 00000000 00000000
>>>>>> Intel machine check architecture supported.
>>>>>> Intel machine check reporting enabled on CPU#0.
>>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>>> Enabling fast FPU save and restore... done.
>>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>>> Checking 'hlt' instruction... OK.
>>>>>> checking if image is initramfs... it is
>>>>>> Freeing initrd memory: 399k freed
>>>>>> NET: Registered protocol family 16
>>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>>> PCI: Using configuration type 1
>>>>>> mtrr: v2.0 (20020519)
>>>>>> ACPI: Subsystem revision 20050729
>>>>>> ACPI: Interpreter disabled.
>>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>>> pnp: PnP ACPI: disabled
>>>>>> usbcore: registered new driver usbfs
>>>>>> usbcore: registered new driver hub
>>>>>> PCI: Probing PCI hardware
>>>>>> PCI: Probing PCI hardware (bus 00)
>>>>>> Boot video device is 0000:01:00.0
>>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>>> audit: initializing netlink socket (disabled)
>>>>>> audit(1125948457.147:1): initialized
>>>>>> Total HugeTLB memory allocated, 0
>>>>>> VFS: Disk quotas dquot_6.5.1
>>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>>> SELinux: Registering netfilter hooks
>>>>>> Initializing Cryptographic API
>>>>>> ksign: Installing public key data
>>>>>> Loading keyring
>>>>>> - Added public key ACD1A80A1D789A78
>>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>>> isapnp: Scanning for PnP cards...
>>>>>> isapnp: No Plug & Play device found
>>>>>> Real Time Clock Driver v1.12
>>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>>>> enabled
>>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>>> io scheduler noop registered
>>>>>> io scheduler anticipatory registered
>>>>>> io scheduler deadline registered
>>>>>> io scheduler cfq registered
>>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>>> blocksize
>>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>>> idebus=xx
>>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>>> VP_IDE: chipset revision 6
>>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>>> pci0000:00:07.1
>>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>>>> Probing IDE interface ide0...
>>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>>> Probing IDE interface ide1...
>>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>>> hda: max request size: 128KiB
>>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>>>>> UDMA(33)
>>>>>> hda: cache flushes supported
>>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>>> ide-floppy driver 0.99.newide
>>>>>> usbcore: registered new driver hiddev
>>>>>> usbcore: registered new driver usbhid
>>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>>> mice: PS/2 mouse device common for all mice
>>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>>> NET: Registered protocol family 2
>>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>>> Initializing IPsec netlink socket
>>>>>> NET: Registered protocol family 1
>>>>>> NET: Registered protocol family 17
>>>>>> Freeing unused kernel memory: 180k freed
>>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>> SELinux: Disabled at runtime.
>>>>>> SELinux: Unregistering netfilter hooks
>>>>>> Floppy drive(s): fd0 is 1.44M
>>>>>> FDC 0 is a post-1991 82077
>>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>>> USB Universal Host Controller Interface driver v2.2
>>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>>> hub 1-0:1.0: USB hub found
>>>>>> hub 1-0:1.0: 2 ports detected
>>>>>> md: Autodetecting RAID arrays.
>>>>>> md: autorun ...
>>>>>> md: ... autorun DONE.
>>>>>> EXT3 FS on hda5, internal journal
>>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>>> dm-devel@redhat.com
>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>> EXT3 FS on hda1, internal journal
>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>> EXT3 FS on hda2, internal journal
>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>> EXT3 FS on hda8, internal journal
>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>> EXT3 FS on hda3, internal journal
>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>>> parport_pc: VIA 686A/8231 detected
>>>>>> parport_pc: probing current configuration
>>>>>> parport_pc: Current parallel port base: 0x378
>>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>>> i2c /dev entries driver
>>>>>> NET: Registered protocol family 10
>>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>>> IPv6 over IPv4 tunneling driver
>>>>>> eth0: no IPv6 routers present
>>>>>> -
>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>> linux-ide" in
>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ___________________________________________________________
>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>> anmelden: http://mail.yahoo.de
>>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ___________________________________________________________
>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>> anmelden: http://mail.yahoo.de
>>>
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
> anmelden: http://mail.yahoo.de
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-08 7:21 ` Re: Riccardo Castellani
@ 2005-09-08 8:06 ` Stefan
2005-09-08 11:34 ` Re: Riccardo Castellani
0 siblings, 1 reply; 2775+ messages in thread
From: Stefan @ 2005-09-08 8:06 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: linux-ide
Riccardo Castellani wrote:
> That's good idea ! I tried to Knoppix but it detects UDMA at 33 Mhz.
> I read in mothearboard manual that it supports until to UDMA 100 Mhz
What is the name of that motherboard and can you provide output of:
lspci
>
> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> Cc: <linux-ide@vger.kernel.org>
> Sent: Thursday, September 08, 2005 3:21 AM
> Subject: Re:
>
>
>> What happens if you check udma level with a live cd like knoppix?
>>
>> Riccardo Castellani wrote:
>>
>>> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
>>> cable".
>>>
>>>
>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>> Cc: <linux-ide@vger.kernel.org>
>>> Sent: Tuesday, September 06, 2005 1:00 PM
>>> Subject: Re:
>>>
>>>
>>>> Riccardo Castellani wrote:
>>>>
>>>>> I bought it directly from store.
>>>>> Several weeks ago I had problems with IDE cable and I could see UDMA5
>>>>> (with "hdparm" command) inside UDMA modes list. UDMA was the current
>>>>> active mode.
>>>>> Then I replaced 80- wire cable and I needed (for other reasons) again
>>>>> to reinstall operating system FC3 and now I'm here.
>>>>
>>>>
>>>>
>>>> Well you probably answered the question yourself now, you must have
>>>> installed a cable only capable of udma2/udma 33.
>>>> The older ide cables have sligthly thicker lines than the >udma2
>>>> cables,
>>>> they have the same connector and of course there are mire connected
>>>> pins
>>>> on the >udma2
>>>> cables but you don't see that if looking at the connector.
>>>>
>>>>>
>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>>>> Subject: Re:
>>>>>
>>>>>
>>>>>> Riccardo Castellani wrote:
>>>>>>
>>>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>>>> (Fedora Core 3)
>>>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>>>> WHY ? How Can I set to UDMA5 ?
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> To change to udma5 run:
>>>>>>
>>>>>> hdparm -X udma5
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>>>
>>>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>>>> Config={ Fixed }
>>>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16,
>>>>>>> MultSect=16
>>>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
>>>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>>>> UDMA modes: udma0 udma1 *udma2
>>>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>>>> Drive conforms to: (null):
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Looks like the drive was switched to only support UDMA2, did you
>>>>>> buy
>>>>>> this drive directly from store?
>>>>>> This drive can be set to only support udma2 with the help of maxtors
>>>>>> utility, this is sometimes needed to fix problems with older boards,
>>>>>> so if you bought this drive from someone, there is a chance, that
>>>>>> this
>>>>>> person switched the udma mode for that drive.
>>>>>> If you got it directly from a store, then this should not be the
>>>>>> case.
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> dmesg gives:
>>>>>>>
>>>>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>>>>>>> 23:27:26
>>>>>>> EDT 2005
>>>>>>> BIOS-provided physical RAM map:
>>>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>>>> 0MB HIGHMEM available.
>>>>>>> 255MB LOWMEM available.
>>>>>>> Using x86 segment limits to approximate NX protection
>>>>>>> On node 0 totalpages: 65520
>>>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>>>> DMI 2.3 present.
>>>>>>> ACPI: RSDP (v000 AMI ) @
>>>>>>> 0x000fc570
>>>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>>>> 0x0fff0000
>>>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>>>> 0x0fff0030
>>>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>>>> 0x00000000
>>>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is
>>>>>>> required to
>>>>>>> enable ACPI
>>>>>>> ACPI: Disabling ACPI support
>>>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>>>> 10000000:efff0000)
>>>>>>> Built 1 zonelists
>>>>>>> Kernel command line: ro root=LABEL=/
>>>>>>> Initializing CPU#0
>>>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>>>> Detected 798.270 MHz processor.
>>>>>>> Using tsc for high-res timesource
>>>>>>> Console: colour VGA+ 80x25
>>>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k
>>>>>>> reserved,
>>>>>>> 694k data, 180k init, 0k highmem)
>>>>>>> Checking if this processor honours the WP bit even in supervisor
>>>>>>> mode... Ok.
>>>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>>>> Security Framework v1.0.0 initialized
>>>>>>> SELinux: Initializing.
>>>>>>> SELinux: Starting in permissive mode
>>>>>>> selinux_register_security: Registering secondary module capability
>>>>>>> Capability LSM initialized as secondary
>>>>>>> Mount-cache hash table entries: 512
>>>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>>>> 00000000
>>>>>>> 00000000 00000000 00000000
>>>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
>>>>>>> 00000000
>>>>>>> 00000000 00000000 00000000
>>>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>>>> CPU: L2 cache: 256K
>>>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>>>> 00000000 00000000 00000000
>>>>>>> Intel machine check architecture supported.
>>>>>>> Intel machine check reporting enabled on CPU#0.
>>>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>>>> Enabling fast FPU save and restore... done.
>>>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>>>> Checking 'hlt' instruction... OK.
>>>>>>> checking if image is initramfs... it is
>>>>>>> Freeing initrd memory: 399k freed
>>>>>>> NET: Registered protocol family 16
>>>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>>>> PCI: Using configuration type 1
>>>>>>> mtrr: v2.0 (20020519)
>>>>>>> ACPI: Subsystem revision 20050729
>>>>>>> ACPI: Interpreter disabled.
>>>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>>>> pnp: PnP ACPI: disabled
>>>>>>> usbcore: registered new driver usbfs
>>>>>>> usbcore: registered new driver hub
>>>>>>> PCI: Probing PCI hardware
>>>>>>> PCI: Probing PCI hardware (bus 00)
>>>>>>> Boot video device is 0000:01:00.0
>>>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>>>> audit: initializing netlink socket (disabled)
>>>>>>> audit(1125948457.147:1): initialized
>>>>>>> Total HugeTLB memory allocated, 0
>>>>>>> VFS: Disk quotas dquot_6.5.1
>>>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>>>> SELinux: Registering netfilter hooks
>>>>>>> Initializing Cryptographic API
>>>>>>> ksign: Installing public key data
>>>>>>> Loading keyring
>>>>>>> - Added public key ACD1A80A1D789A78
>>>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>>>> isapnp: Scanning for PnP cards...
>>>>>>> isapnp: No Plug & Play device found
>>>>>>> Real Time Clock Driver v1.12
>>>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>>>>> enabled
>>>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>>>> io scheduler noop registered
>>>>>>> io scheduler anticipatory registered
>>>>>>> io scheduler deadline registered
>>>>>>> io scheduler cfq registered
>>>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>>>> blocksize
>>>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>>>> idebus=xx
>>>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>>>> VP_IDE: chipset revision 6
>>>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>>>> pci0000:00:07.1
>>>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>>>>> Probing IDE interface ide0...
>>>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>>>> Probing IDE interface ide1...
>>>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>>>> hda: max request size: 128KiB
>>>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>>>>>> UDMA(33)
>>>>>>> hda: cache flushes supported
>>>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>>>> ide-floppy driver 0.99.newide
>>>>>>> usbcore: registered new driver hiddev
>>>>>>> usbcore: registered new driver usbhid
>>>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>>>> mice: PS/2 mouse device common for all mice
>>>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>>>> NET: Registered protocol family 2
>>>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>>>> Initializing IPsec netlink socket
>>>>>>> NET: Registered protocol family 1
>>>>>>> NET: Registered protocol family 17
>>>>>>> Freeing unused kernel memory: 180k freed
>>>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>> SELinux: Disabled at runtime.
>>>>>>> SELinux: Unregistering netfilter hooks
>>>>>>> Floppy drive(s): fd0 is 1.44M
>>>>>>> FDC 0 is a post-1991 82077
>>>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>>>> USB Universal Host Controller Interface driver v2.2
>>>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
>>>>>>> number 1
>>>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>>>> hub 1-0:1.0: USB hub found
>>>>>>> hub 1-0:1.0: 2 ports detected
>>>>>>> md: Autodetecting RAID arrays.
>>>>>>> md: autorun ...
>>>>>>> md: ... autorun DONE.
>>>>>>> EXT3 FS on hda5, internal journal
>>>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>>>> dm-devel@redhat.com
>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>> EXT3 FS on hda1, internal journal
>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>> EXT3 FS on hda2, internal journal
>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>> EXT3 FS on hda8, internal journal
>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>> EXT3 FS on hda3, internal journal
>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>>>> parport_pc: VIA 686A/8231 detected
>>>>>>> parport_pc: probing current configuration
>>>>>>> parport_pc: Current parallel port base: 0x378
>>>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>>>> i2c /dev entries driver
>>>>>>> NET: Registered protocol family 10
>>>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>>>> IPv6 over IPv4 tunneling driver
>>>>>>> eth0: no IPv6 routers present
>>>>>>> -
>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>> linux-ide" in
>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ___________________________________________________________
>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>> anmelden: http://mail.yahoo.de
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ___________________________________________________________
>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>> anmelden: http://mail.yahoo.de
>>>>
>>>
>>> -
>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>>
>>
>>
>>
>>
>> ___________________________________________________________
>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>> anmelden: http://mail.yahoo.de
>>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-08 8:06 ` Re: Stefan
@ 2005-09-08 11:34 ` Riccardo Castellani
2005-09-08 15:55 ` Re: Stefan
0 siblings, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-08 11:34 UTC (permalink / raw)
To: Stefan, Riccardo Castellani; +Cc: linux-ide
Gigabyte
GA-6VXC7-4X-P rev. 5.2
I see in dmseg:
Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com) (gcc
version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fc570
ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000
ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030
ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable
ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
Initializing CPU#0
CPU 0 irqstacks, hard=c0447000 soft=c0446000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 798.155 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254828k/262080k available (2450k kernel code, 6572k reserved, 694k
data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 399k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050729
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1126182695.366:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key ACD1A80A1D789A78
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 180k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PS/2 Generic Mouse on isa0060/serio1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 5 for device 0000:00:0a.0
eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda5, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
parport_pc: VIA parallel port: io=0x378, irq=7
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03d60a0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
----- Original Message -----
From: "Stefan" <gentoopower@yahoo.de>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: <linux-ide@vger.kernel.org>
Sent: Thursday, September 08, 2005 10:06 AM
Subject: Re:
> Riccardo Castellani wrote:
>
>> That's good idea ! I tried to Knoppix but it detects UDMA at 33 Mhz.
>> I read in mothearboard manual that it supports until to UDMA 100 Mhz
>
>
> What is the name of that motherboard and can you provide output of:
>
> lspci
>
>>
>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>> Cc: <linux-ide@vger.kernel.org>
>> Sent: Thursday, September 08, 2005 3:21 AM
>> Subject: Re:
>>
>>
>>> What happens if you check udma level with a live cd like knoppix?
>>>
>>> Riccardo Castellani wrote:
>>>
>>>> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
>>>> cable".
>>>>
>>>>
>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>> Cc: <linux-ide@vger.kernel.org>
>>>> Sent: Tuesday, September 06, 2005 1:00 PM
>>>> Subject: Re:
>>>>
>>>>
>>>>> Riccardo Castellani wrote:
>>>>>
>>>>>> I bought it directly from store.
>>>>>> Several weeks ago I had problems with IDE cable and I could see UDMA5
>>>>>> (with "hdparm" command) inside UDMA modes list. UDMA was the current
>>>>>> active mode.
>>>>>> Then I replaced 80- wire cable and I needed (for other reasons) again
>>>>>> to reinstall operating system FC3 and now I'm here.
>>>>>
>>>>>
>>>>>
>>>>> Well you probably answered the question yourself now, you must have
>>>>> installed a cable only capable of udma2/udma 33.
>>>>> The older ide cables have sligthly thicker lines than the >udma2
>>>>> cables,
>>>>> they have the same connector and of course there are mire connected
>>>>> pins
>>>>> on the >udma2
>>>>> cables but you don't see that if looking at the connector.
>>>>>
>>>>>>
>>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>>>>> Subject: Re:
>>>>>>
>>>>>>
>>>>>>> Riccardo Castellani wrote:
>>>>>>>
>>>>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>>>>> (Fedora Core 3)
>>>>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>>>>> WHY ? How Can I set to UDMA5 ?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> To change to udma5 run:
>>>>>>>
>>>>>>> hdparm -X udma5
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>>>>
>>>>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>>>>> Config={ Fixed }
>>>>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16,
>>>>>>>> MultSect=16
>>>>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
>>>>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>>>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>>>>> UDMA modes: udma0 udma1 *udma2
>>>>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>>>>> Drive conforms to: (null):
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Looks like the drive was switched to only support UDMA2, did you
>>>>>>> buy
>>>>>>> this drive directly from store?
>>>>>>> This drive can be set to only support udma2 with the help of maxtors
>>>>>>> utility, this is sometimes needed to fix problems with older boards,
>>>>>>> so if you bought this drive from someone, there is a chance, that
>>>>>>> this
>>>>>>> person switched the udma mode for that drive.
>>>>>>> If you got it directly from a store, then this should not be the
>>>>>>> case.
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> dmesg gives:
>>>>>>>>
>>>>>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>>>>>>>> 23:27:26
>>>>>>>> EDT 2005
>>>>>>>> BIOS-provided physical RAM map:
>>>>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>>>>> 0MB HIGHMEM available.
>>>>>>>> 255MB LOWMEM available.
>>>>>>>> Using x86 segment limits to approximate NX protection
>>>>>>>> On node 0 totalpages: 65520
>>>>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>>>>> DMI 2.3 present.
>>>>>>>> ACPI: RSDP (v000 AMI ) @
>>>>>>>> 0x000fc570
>>>>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>>>>> 0x0fff0000
>>>>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>>>>> 0x0fff0030
>>>>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>>>>> 0x00000000
>>>>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is
>>>>>>>> required to
>>>>>>>> enable ACPI
>>>>>>>> ACPI: Disabling ACPI support
>>>>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>>>>> 10000000:efff0000)
>>>>>>>> Built 1 zonelists
>>>>>>>> Kernel command line: ro root=LABEL=/
>>>>>>>> Initializing CPU#0
>>>>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>>>>> Detected 798.270 MHz processor.
>>>>>>>> Using tsc for high-res timesource
>>>>>>>> Console: colour VGA+ 80x25
>>>>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k
>>>>>>>> reserved,
>>>>>>>> 694k data, 180k init, 0k highmem)
>>>>>>>> Checking if this processor honours the WP bit even in supervisor
>>>>>>>> mode... Ok.
>>>>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>>>>> Security Framework v1.0.0 initialized
>>>>>>>> SELinux: Initializing.
>>>>>>>> SELinux: Starting in permissive mode
>>>>>>>> selinux_register_security: Registering secondary module capability
>>>>>>>> Capability LSM initialized as secondary
>>>>>>>> Mount-cache hash table entries: 512
>>>>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>>>>> 00000000
>>>>>>>> 00000000 00000000 00000000
>>>>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
>>>>>>>> 00000000
>>>>>>>> 00000000 00000000 00000000
>>>>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>>>>> CPU: L2 cache: 256K
>>>>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>>>>> 00000000 00000000 00000000
>>>>>>>> Intel machine check architecture supported.
>>>>>>>> Intel machine check reporting enabled on CPU#0.
>>>>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>>>>> Enabling fast FPU save and restore... done.
>>>>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>>>>> Checking 'hlt' instruction... OK.
>>>>>>>> checking if image is initramfs... it is
>>>>>>>> Freeing initrd memory: 399k freed
>>>>>>>> NET: Registered protocol family 16
>>>>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>>>>> PCI: Using configuration type 1
>>>>>>>> mtrr: v2.0 (20020519)
>>>>>>>> ACPI: Subsystem revision 20050729
>>>>>>>> ACPI: Interpreter disabled.
>>>>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>>>>> pnp: PnP ACPI: disabled
>>>>>>>> usbcore: registered new driver usbfs
>>>>>>>> usbcore: registered new driver hub
>>>>>>>> PCI: Probing PCI hardware
>>>>>>>> PCI: Probing PCI hardware (bus 00)
>>>>>>>> Boot video device is 0000:01:00.0
>>>>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>>>>> audit: initializing netlink socket (disabled)
>>>>>>>> audit(1125948457.147:1): initialized
>>>>>>>> Total HugeTLB memory allocated, 0
>>>>>>>> VFS: Disk quotas dquot_6.5.1
>>>>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>>>>> SELinux: Registering netfilter hooks
>>>>>>>> Initializing Cryptographic API
>>>>>>>> ksign: Installing public key data
>>>>>>>> Loading keyring
>>>>>>>> - Added public key ACD1A80A1D789A78
>>>>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>>>>> isapnp: Scanning for PnP cards...
>>>>>>>> isapnp: No Plug & Play device found
>>>>>>>> Real Time Clock Driver v1.12
>>>>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>>>>>> enabled
>>>>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>>>>> io scheduler noop registered
>>>>>>>> io scheduler anticipatory registered
>>>>>>>> io scheduler deadline registered
>>>>>>>> io scheduler cfq registered
>>>>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>>>>> blocksize
>>>>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>>>>> idebus=xx
>>>>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>>>>> VP_IDE: chipset revision 6
>>>>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>>>>> pci0000:00:07.1
>>>>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>>>>>> Probing IDE interface ide0...
>>>>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>>>>> Probing IDE interface ide1...
>>>>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>>>>> hda: max request size: 128KiB
>>>>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>>>>>>> UDMA(33)
>>>>>>>> hda: cache flushes supported
>>>>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>>>>> ide-floppy driver 0.99.newide
>>>>>>>> usbcore: registered new driver hiddev
>>>>>>>> usbcore: registered new driver usbhid
>>>>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>>>>> mice: PS/2 mouse device common for all mice
>>>>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>>>>> NET: Registered protocol family 2
>>>>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>>>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>>>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>>>>> Initializing IPsec netlink socket
>>>>>>>> NET: Registered protocol family 1
>>>>>>>> NET: Registered protocol family 17
>>>>>>>> Freeing unused kernel memory: 180k freed
>>>>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>> SELinux: Disabled at runtime.
>>>>>>>> SELinux: Unregistering netfilter hooks
>>>>>>>> Floppy drive(s): fd0 is 1.44M
>>>>>>>> FDC 0 is a post-1991 82077
>>>>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>>>>> USB Universal Host Controller Interface driver v2.2
>>>>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
>>>>>>>> number 1
>>>>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>>>>> hub 1-0:1.0: USB hub found
>>>>>>>> hub 1-0:1.0: 2 ports detected
>>>>>>>> md: Autodetecting RAID arrays.
>>>>>>>> md: autorun ...
>>>>>>>> md: ... autorun DONE.
>>>>>>>> EXT3 FS on hda5, internal journal
>>>>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>>>>> dm-devel@redhat.com
>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>> EXT3 FS on hda1, internal journal
>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>> EXT3 FS on hda2, internal journal
>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>> EXT3 FS on hda8, internal journal
>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>> EXT3 FS on hda3, internal journal
>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>>>>> parport_pc: VIA 686A/8231 detected
>>>>>>>> parport_pc: probing current configuration
>>>>>>>> parport_pc: Current parallel port base: 0x378
>>>>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>>>>> i2c /dev entries driver
>>>>>>>> NET: Registered protocol family 10
>>>>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>>>>> IPv6 over IPv4 tunneling driver
>>>>>>>> eth0: no IPv6 routers present
>>>>>>>> -
>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>> linux-ide" in
>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ___________________________________________________________
>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ___________________________________________________________
>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>> anmelden: http://mail.yahoo.de
>>>>>
>>>>
>>>> -
>>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ___________________________________________________________
>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>> anmelden: http://mail.yahoo.de
>>>
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
> anmelden: http://mail.yahoo.de
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re:
2005-09-08 11:34 ` Re: Riccardo Castellani
@ 2005-09-08 15:55 ` Stefan
2005-09-19 9:19 ` UDMA5 Riccardo Castellani
0 siblings, 1 reply; 2775+ messages in thread
From: Stefan @ 2005-09-08 15:55 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: linux-ide
Looks quite good, I checked the source of the via driver for your board
and there is no code that would limit it to udma2, so linux definitely
would enable udma5 if the rest of the components would work alright.
So in my opinion there are three possibilities now, either the drive is
set to udma2(UDMA 33) or the cable is broken or the connector on the
motherboard for ide is broken.
If you got a boxed harddrive then you shouzld have a maxtor diagnose
floppy and I think it also has the feature on boadr to check and set
udma level, if not it should be available on their website, I have used
this tool before.
Riccardo Castellani wrote:
> Gigabyte
> GA-6VXC7-4X-P rev. 5.2
>
> I see in dmseg:
>
> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
> EDT 2005
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 255MB LOWMEM available.
> Using x86 segment limits to approximate NX protection
> On node 0 totalpages: 65520
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 61424 pages, LIFO batch:31
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> ACPI: RSDP (v000 AMI ) @ 0x000fc570
> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000
> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030
> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
> enable ACPI
> ACPI: Disabling ACPI support
> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
> Built 1 zonelists
> Kernel command line: ro root=LABEL=/
> Initializing CPU#0
> CPU 0 irqstacks, hard=c0447000 soft=c0446000
> PID hash table entries: 1024 (order: 10, 16384 bytes)
> Detected 798.155 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
> 694k data, 180k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
> 00000000 00000000 00000000
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
> 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: Intel Pentium III (Coppermine) stepping 06
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> checking if image is initramfs... it is
> Freeing initrd memory: 399k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20050729
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> audit: initializing netlink socket (disabled)
> audit(1126182695.366:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key ACD1A80A1D789A78
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected VIA Apollo Pro 133 chipset
> agpgart: AGP aperture is 64M @ 0xe0000000
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> VP_IDE: IDE controller at PCI slot 0000:00:07.1
> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
> Probing IDE interface ide0...
> hda: Maxtor 6Y080L0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
> UDMA(33)
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.20
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 512 buckets, 16Kbytes
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Freeing unused kernel memory: 180k freed
> input: AT Translated Set 2 keyboard on isa0060/serio0
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> input: PS/2 Generic Mouse on isa0060/serio1
> SELinux: Disabled at runtime.
> SELinux: Unregistering netfilter hooks
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> 8139too Fast Ethernet driver 0.9.27
> PCI: Found IRQ 5 for device 0000:00:0a.0
> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 5
> eth0: Identified 8139 chip type 'RTL-8139C'
> USB Universal Host Controller Interface driver v2.2
> PCI: Found IRQ 11 for device 0000:00:07.2
> uhci_hcd 0000:00:07.2: UHCI Host Controller
> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> EXT3 FS on hda5, internal journal
> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
> parport_pc: VIA 686A/8231 detected
> parport_pc: probing current configuration
> parport_pc: Current parallel port base: 0x378
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> parport_pc: VIA parallel port: io=0x378, irq=7
> ieee1394: Initialized config rom entry `ip1394'
> ip_tables: (C) 2000-2002 Netfilter core team
> ip_tables: (C) 2000-2002 Netfilter core team
> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
> i2c /dev entries driver
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c03d60a0(lo)
> IPv6 over IPv4 tunneling driver
> eth0: no IPv6 routers present
>
>
> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> Cc: <linux-ide@vger.kernel.org>
> Sent: Thursday, September 08, 2005 10:06 AM
> Subject: Re:
>
>
>> Riccardo Castellani wrote:
>>
>>> That's good idea ! I tried to Knoppix but it detects UDMA at 33 Mhz.
>>> I read in mothearboard manual that it supports until to UDMA 100 Mhz
>>
>>
>>
>> What is the name of that motherboard and can you provide output of:
>>
>> lspci
>>
>>>
>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>> Cc: <linux-ide@vger.kernel.org>
>>> Sent: Thursday, September 08, 2005 3:21 AM
>>> Subject: Re:
>>>
>>>
>>>> What happens if you check udma level with a live cd like knoppix?
>>>>
>>>> Riccardo Castellani wrote:
>>>>
>>>>> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
>>>>> cable".
>>>>>
>>>>>
>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>> Sent: Tuesday, September 06, 2005 1:00 PM
>>>>> Subject: Re:
>>>>>
>>>>>
>>>>>> Riccardo Castellani wrote:
>>>>>>
>>>>>>> I bought it directly from store.
>>>>>>> Several weeks ago I had problems with IDE cable and I could see
>>>>>>> UDMA5
>>>>>>> (with "hdparm" command) inside UDMA modes list. UDMA was the
>>>>>>> current
>>>>>>> active mode.
>>>>>>> Then I replaced 80- wire cable and I needed (for other reasons)
>>>>>>> again
>>>>>>> to reinstall operating system FC3 and now I'm here.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Well you probably answered the question yourself now, you must have
>>>>>> installed a cable only capable of udma2/udma 33.
>>>>>> The older ide cables have sligthly thicker lines than the >udma2
>>>>>> cables,
>>>>>> they have the same connector and of course there are mire connected
>>>>>> pins
>>>>>> on the >udma2
>>>>>> cables but you don't see that if looking at the connector.
>>>>>>
>>>>>>>
>>>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>>>>>> Subject: Re:
>>>>>>>
>>>>>>>
>>>>>>>> Riccardo Castellani wrote:
>>>>>>>>
>>>>>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>>>>>> (Fedora Core 3)
>>>>>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>>>>>> WHY ? How Can I set to UDMA5 ?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> To change to udma5 run:
>>>>>>>>
>>>>>>>> hdparm -X udma5
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>>>>>
>>>>>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>>>>>> Config={ Fixed }
>>>>>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16,
>>>>>>>>> MultSect=16
>>>>>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes,
>>>>>>>>> LBAsects=160086528
>>>>>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>>>>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>>>>>> UDMA modes: udma0 udma1 *udma2
>>>>>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>>>>>> Drive conforms to: (null):
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Looks like the drive was switched to only support UDMA2, did you
>>>>>>>> buy
>>>>>>>> this drive directly from store?
>>>>>>>> This drive can be set to only support udma2 with the help of
>>>>>>>> maxtors
>>>>>>>> utility, this is sometimes needed to fix problems with older
>>>>>>>> boards,
>>>>>>>> so if you bought this drive from someone, there is a chance, that
>>>>>>>> this
>>>>>>>> person switched the udma mode for that drive.
>>>>>>>> If you got it directly from a store, then this should not be the
>>>>>>>> case.
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> dmesg gives:
>>>>>>>>>
>>>>>>>>> Linux version 2.6.12-1.1376_FC3
>>>>>>>>> (bhcompile@tweety.build.redhat.com)
>>>>>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>>>>>>>>> 23:27:26
>>>>>>>>> EDT 2005
>>>>>>>>> BIOS-provided physical RAM map:
>>>>>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>>>>>> 0MB HIGHMEM available.
>>>>>>>>> 255MB LOWMEM available.
>>>>>>>>> Using x86 segment limits to approximate NX protection
>>>>>>>>> On node 0 totalpages: 65520
>>>>>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>>>>>> DMI 2.3 present.
>>>>>>>>> ACPI: RSDP (v000 AMI ) @
>>>>>>>>> 0x000fc570
>>>>>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>>>>>> 0x0fff0000
>>>>>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>>>>>> 0x0fff0030
>>>>>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>>>>>> 0x00000000
>>>>>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is
>>>>>>>>> required to
>>>>>>>>> enable ACPI
>>>>>>>>> ACPI: Disabling ACPI support
>>>>>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>>>>>> 10000000:efff0000)
>>>>>>>>> Built 1 zonelists
>>>>>>>>> Kernel command line: ro root=LABEL=/
>>>>>>>>> Initializing CPU#0
>>>>>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>>>>>> Detected 798.270 MHz processor.
>>>>>>>>> Using tsc for high-res timesource
>>>>>>>>> Console: colour VGA+ 80x25
>>>>>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k
>>>>>>>>> reserved,
>>>>>>>>> 694k data, 180k init, 0k highmem)
>>>>>>>>> Checking if this processor honours the WP bit even in supervisor
>>>>>>>>> mode... Ok.
>>>>>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>>>>>> Security Framework v1.0.0 initialized
>>>>>>>>> SELinux: Initializing.
>>>>>>>>> SELinux: Starting in permissive mode
>>>>>>>>> selinux_register_security: Registering secondary module
>>>>>>>>> capability
>>>>>>>>> Capability LSM initialized as secondary
>>>>>>>>> Mount-cache hash table entries: 512
>>>>>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>> 00000000
>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>> 00000000
>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>>>>>> CPU: L2 cache: 256K
>>>>>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>> Intel machine check architecture supported.
>>>>>>>>> Intel machine check reporting enabled on CPU#0.
>>>>>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>>>>>> Enabling fast FPU save and restore... done.
>>>>>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>>>>>> Checking 'hlt' instruction... OK.
>>>>>>>>> checking if image is initramfs... it is
>>>>>>>>> Freeing initrd memory: 399k freed
>>>>>>>>> NET: Registered protocol family 16
>>>>>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>>>>>> PCI: Using configuration type 1
>>>>>>>>> mtrr: v2.0 (20020519)
>>>>>>>>> ACPI: Subsystem revision 20050729
>>>>>>>>> ACPI: Interpreter disabled.
>>>>>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>>>>>> pnp: PnP ACPI: disabled
>>>>>>>>> usbcore: registered new driver usbfs
>>>>>>>>> usbcore: registered new driver hub
>>>>>>>>> PCI: Probing PCI hardware
>>>>>>>>> PCI: Probing PCI hardware (bus 00)
>>>>>>>>> Boot video device is 0000:01:00.0
>>>>>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>>>>>> audit: initializing netlink socket (disabled)
>>>>>>>>> audit(1125948457.147:1): initialized
>>>>>>>>> Total HugeTLB memory allocated, 0
>>>>>>>>> VFS: Disk quotas dquot_6.5.1
>>>>>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>>>>>> SELinux: Registering netfilter hooks
>>>>>>>>> Initializing Cryptographic API
>>>>>>>>> ksign: Installing public key data
>>>>>>>>> Loading keyring
>>>>>>>>> - Added public key ACD1A80A1D789A78
>>>>>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>>>>>> isapnp: Scanning for PnP cards...
>>>>>>>>> isapnp: No Plug & Play device found
>>>>>>>>> Real Time Clock Driver v1.12
>>>>>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>>>>>>> enabled
>>>>>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>>>>>> io scheduler noop registered
>>>>>>>>> io scheduler anticipatory registered
>>>>>>>>> io scheduler deadline registered
>>>>>>>>> io scheduler cfq registered
>>>>>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>>>>>> blocksize
>>>>>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>>>>>> idebus=xx
>>>>>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>>>>>> VP_IDE: chipset revision 6
>>>>>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>>>>>> pci0000:00:07.1
>>>>>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>>>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>>>>>>> Probing IDE interface ide0...
>>>>>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>>>>>> Probing IDE interface ide1...
>>>>>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>>>>>> hda: max request size: 128KiB
>>>>>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache,
>>>>>>>>> CHS=65535/16/63,
>>>>>>>>> UDMA(33)
>>>>>>>>> hda: cache flushes supported
>>>>>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>>>>>> ide-floppy driver 0.99.newide
>>>>>>>>> usbcore: registered new driver hiddev
>>>>>>>>> usbcore: registered new driver usbhid
>>>>>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>>>>>> mice: PS/2 mouse device common for all mice
>>>>>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>>>>>> NET: Registered protocol family 2
>>>>>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>>>>>> TCP established hash table entries: 16384 (order: 5, 131072
>>>>>>>>> bytes)
>>>>>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>>>>>> Initializing IPsec netlink socket
>>>>>>>>> NET: Registered protocol family 1
>>>>>>>>> NET: Registered protocol family 17
>>>>>>>>> Freeing unused kernel memory: 180k freed
>>>>>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>> SELinux: Disabled at runtime.
>>>>>>>>> SELinux: Unregistering netfilter hooks
>>>>>>>>> Floppy drive(s): fd0 is 1.44M
>>>>>>>>> FDC 0 is a post-1991 82077
>>>>>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>>>>>> USB Universal Host Controller Interface driver v2.2
>>>>>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
>>>>>>>>> number 1
>>>>>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>>>>>> hub 1-0:1.0: USB hub found
>>>>>>>>> hub 1-0:1.0: 2 ports detected
>>>>>>>>> md: Autodetecting RAID arrays.
>>>>>>>>> md: autorun ...
>>>>>>>>> md: ... autorun DONE.
>>>>>>>>> EXT3 FS on hda5, internal journal
>>>>>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>>>>>> dm-devel@redhat.com
>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>> EXT3 FS on hda1, internal journal
>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>> EXT3 FS on hda2, internal journal
>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>> EXT3 FS on hda8, internal journal
>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>> EXT3 FS on hda3, internal journal
>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>>>>>> parport_pc: VIA 686A/8231 detected
>>>>>>>>> parport_pc: probing current configuration
>>>>>>>>> parport_pc: Current parallel port base: 0x378
>>>>>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>>>>>> i2c /dev entries driver
>>>>>>>>> NET: Registered protocol family 10
>>>>>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>>>>>> IPv6 over IPv4 tunneling driver
>>>>>>>>> eth0: no IPv6 routers present
>>>>>>>>> -
>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>>> linux-ide" in
>>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>>> More majordomo info at
>>>>>>>>> http://vger.kernel.org/majordomo-info.html
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ___________________________________________________________
>>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ___________________________________________________________
>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>> anmelden: http://mail.yahoo.de
>>>>>>
>>>>>
>>>>> -
>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>> linux-ide" in
>>>>> the body of a message to majordomo@vger.kernel.org
>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ___________________________________________________________
>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>> anmelden: http://mail.yahoo.de
>>>>
>>>
>>> -
>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>>
>>
>>
>>
>>
>> ___________________________________________________________
>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>> anmelden: http://mail.yahoo.de
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: UDMA5
2005-09-08 15:55 ` Re: Stefan
@ 2005-09-19 9:19 ` Riccardo Castellani
2005-09-19 9:50 ` UDMA5 Stefan
0 siblings, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-19 9:19 UTC (permalink / raw)
To: Stefan, Riccardo Castellani; +Cc: linux-ide
Now I set CDROM as master on IDE 1 but I didn't find any BIOS settings to
force UDMA value.
I already replaced 80 wired IDE cable twice BUT NOTHING !
dmesg:
Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com) (gcc
version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fc570
ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000
ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030
ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable
ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
Initializing CPU#0
CPU 0 irqstacks, hard=c0447000 soft=c0446000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 798.067 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 254828k/262080k available (2450k kernel code, 6572k reserved, 694k
data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 399k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050729
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1127121018.960:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key ACD1A80A1D789A78
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 180k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PS/2 Generic Mouse on isa0060/serio1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 5 for device 0000:00:0a.0
eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda5, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
parport_pc: VIA parallel port: io=0x378, irq=7
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03d60a0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Now I have also this message !
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
----- Original Message -----
From: "Stefan" <gentoopower@yahoo.de>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: <linux-ide@vger.kernel.org>
Sent: Thursday, September 08, 2005 5:55 PM
Subject: Re:
> Looks quite good, I checked the source of the via driver for your board
> and there is no code that would limit it to udma2, so linux definitely
> would enable udma5 if the rest of the components would work alright.
>
> So in my opinion there are three possibilities now, either the drive is
> set to udma2(UDMA 33) or the cable is broken or the connector on the
> motherboard for ide is broken.
> If you got a boxed harddrive then you shouzld have a maxtor diagnose
> floppy and I think it also has the feature on boadr to check and set
> udma level, if not it should be available on their website, I have used
> this tool before.
>
>
> Riccardo Castellani wrote:
>
>> Gigabyte
>> GA-6VXC7-4X-P rev. 5.2
>>
>> I see in dmseg:
>>
>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>> EDT 2005
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>> 0MB HIGHMEM available.
>> 255MB LOWMEM available.
>> Using x86 segment limits to approximate NX protection
>> On node 0 totalpages: 65520
>> DMA zone: 4096 pages, LIFO batch:1
>> Normal zone: 61424 pages, LIFO batch:31
>> HighMem zone: 0 pages, LIFO batch:1
>> DMI 2.3 present.
>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @ 0x0fff0000
>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @ 0x0fff0030
>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @ 0x00000000
>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>> enable ACPI
>> ACPI: Disabling ACPI support
>> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
>> Built 1 zonelists
>> Kernel command line: ro root=LABEL=/
>> Initializing CPU#0
>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>> Detected 798.155 MHz processor.
>> Using tsc for high-res timesource
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>> 694k data, 180k init, 0k highmem)
>> Checking if this processor honours the WP bit even in supervisor
>> mode... Ok.
>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>> Security Framework v1.0.0 initialized
>> SELinux: Initializing.
>> SELinux: Starting in permissive mode
>> selinux_register_security: Registering secondary module capability
>> Capability LSM initialized as secondary
>> Mount-cache hash table entries: 512
>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>> 00000000 00000000 00000000
>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>> 00000000 00000000 00000000
>> CPU: L1 I cache: 16K, L1 D cache: 16K
>> CPU: L2 cache: 256K
>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>> 00000000 00000000 00000000
>> Intel machine check architecture supported.
>> Intel machine check reporting enabled on CPU#0.
>> CPU: Intel Pentium III (Coppermine) stepping 06
>> Enabling fast FPU save and restore... done.
>> Enabling unmasked SIMD FPU exception support... done.
>> Checking 'hlt' instruction... OK.
>> checking if image is initramfs... it is
>> Freeing initrd memory: 399k freed
>> NET: Registered protocol family 16
>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>> PCI: Using configuration type 1
>> mtrr: v2.0 (20020519)
>> ACPI: Subsystem revision 20050729
>> ACPI: Interpreter disabled.
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI: disabled
>> usbcore: registered new driver usbfs
>> usbcore: registered new driver hub
>> PCI: Probing PCI hardware
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>> audit: initializing netlink socket (disabled)
>> audit(1126182695.366:1): initialized
>> Total HugeTLB memory allocated, 0
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> SELinux: Registering netfilter hooks
>> Initializing Cryptographic API
>> ksign: Installing public key data
>> Loading keyring
>> - Added public key ACD1A80A1D789A78
>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> isapnp: Scanning for PnP cards...
>> isapnp: No Plug & Play device found
>> Real Time Clock Driver v1.12
>> Linux agpgart interface v0.101 (c) Dave Jones
>> agpgart: Detected VIA Apollo Pro 133 chipset
>> agpgart: AGP aperture is 64M @ 0xe0000000
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered
>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>> VP_IDE: chipset revision 6
>> VP_IDE: not 100% native mode: will probe irqs later
>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>> Probing IDE interface ide0...
>> hda: Maxtor 6Y080L0, ATA DISK drive
>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>> Probing IDE interface ide1...
>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>> ide1 at 0x170-0x177,0x376 on irq 15
>> hda: max request size: 128KiB
>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>> UDMA(33)
>> hda: cache flushes supported
>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>> Uniform CD-ROM driver Revision: 3.20
>> ide-floppy driver 0.99.newide
>> usbcore: registered new driver hiddev
>> usbcore: registered new driver usbhid
>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>> mice: PS/2 mouse device common for all mice
>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>> NET: Registered protocol family 2
>> IP: routing cache hash table of 512 buckets, 16Kbytes
>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>> TCP: Hash tables configured (established 16384 bind 16384)
>> Initializing IPsec netlink socket
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> Freeing unused kernel memory: 180k freed
>> input: AT Translated Set 2 keyboard on isa0060/serio0
>> kjournald starting. Commit interval 5 seconds
>> EXT3-fs: mounted filesystem with ordered data mode.
>> input: PS/2 Generic Mouse on isa0060/serio1
>> SELinux: Disabled at runtime.
>> SELinux: Unregistering netfilter hooks
>> Floppy drive(s): fd0 is 1.44M
>> FDC 0 is a post-1991 82077
>> 8139too Fast Ethernet driver 0.9.27
>> PCI: Found IRQ 5 for device 0000:00:0a.0
>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 5
>> eth0: Identified 8139 chip type 'RTL-8139C'
>> USB Universal Host Controller Interface driver v2.2
>> PCI: Found IRQ 11 for device 0000:00:07.2
>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 2 ports detected
>> md: Autodetecting RAID arrays.
>> md: autorun ...
>> md: ... autorun DONE.
>> EXT3 FS on hda5, internal journal
>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda1, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda2, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda8, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on hda3, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>> parport_pc: VIA 686A/8231 detected
>> parport_pc: probing current configuration
>> parport_pc: Current parallel port base: 0x378
>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>> parport_pc: VIA parallel port: io=0x378, irq=7
>> ieee1394: Initialized config rom entry `ip1394'
>> ip_tables: (C) 2000-2002 Netfilter core team
>> ip_tables: (C) 2000-2002 Netfilter core team
>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>> i2c /dev entries driver
>> NET: Registered protocol family 10
>> Disabled Privacy Extensions on device c03d60a0(lo)
>> IPv6 over IPv4 tunneling driver
>> eth0: no IPv6 routers present
>>
>>
>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>> Cc: <linux-ide@vger.kernel.org>
>> Sent: Thursday, September 08, 2005 10:06 AM
>> Subject: Re:
>>
>>
>>> Riccardo Castellani wrote:
>>>
>>>> That's good idea ! I tried to Knoppix but it detects UDMA at 33 Mhz.
>>>> I read in mothearboard manual that it supports until to UDMA 100 Mhz
>>>
>>>
>>>
>>> What is the name of that motherboard and can you provide output of:
>>>
>>> lspci
>>>
>>>>
>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>> Cc: <linux-ide@vger.kernel.org>
>>>> Sent: Thursday, September 08, 2005 3:21 AM
>>>> Subject: Re:
>>>>
>>>>
>>>>> What happens if you check udma level with a live cd like knoppix?
>>>>>
>>>>> Riccardo Castellani wrote:
>>>>>
>>>>>> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
>>>>>> cable".
>>>>>>
>>>>>>
>>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>> Sent: Tuesday, September 06, 2005 1:00 PM
>>>>>> Subject: Re:
>>>>>>
>>>>>>
>>>>>>> Riccardo Castellani wrote:
>>>>>>>
>>>>>>>> I bought it directly from store.
>>>>>>>> Several weeks ago I had problems with IDE cable and I could see
>>>>>>>> UDMA5
>>>>>>>> (with "hdparm" command) inside UDMA modes list. UDMA was the
>>>>>>>> current
>>>>>>>> active mode.
>>>>>>>> Then I replaced 80- wire cable and I needed (for other reasons)
>>>>>>>> again
>>>>>>>> to reinstall operating system FC3 and now I'm here.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Well you probably answered the question yourself now, you must have
>>>>>>> installed a cable only capable of udma2/udma 33.
>>>>>>> The older ide cables have sligthly thicker lines than the >udma2
>>>>>>> cables,
>>>>>>> they have the same connector and of course there are mire connected
>>>>>>> pins
>>>>>>> on the >udma2
>>>>>>> cables but you don't see that if looking at the connector.
>>>>>>>
>>>>>>>>
>>>>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>>>>>>> Subject: Re:
>>>>>>>>
>>>>>>>>
>>>>>>>>> Riccardo Castellani wrote:
>>>>>>>>>
>>>>>>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>>>>>>> (Fedora Core 3)
>>>>>>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>>>>>>> WHY ? How Can I set to UDMA5 ?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> To change to udma5 run:
>>>>>>>>>
>>>>>>>>> hdparm -X udma5
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>>>>>>
>>>>>>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>>>>>>> Config={ Fixed }
>>>>>>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>>>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16,
>>>>>>>>>> MultSect=16
>>>>>>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes,
>>>>>>>>>> LBAsects=160086528
>>>>>>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
>>>>>>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>>>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>>>>>>> UDMA modes: udma0 udma1 *udma2
>>>>>>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>>>>>>> Drive conforms to: (null):
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Looks like the drive was switched to only support UDMA2, did you
>>>>>>>>> buy
>>>>>>>>> this drive directly from store?
>>>>>>>>> This drive can be set to only support udma2 with the help of
>>>>>>>>> maxtors
>>>>>>>>> utility, this is sometimes needed to fix problems with older
>>>>>>>>> boards,
>>>>>>>>> so if you bought this drive from someone, there is a chance, that
>>>>>>>>> this
>>>>>>>>> person switched the udma mode for that drive.
>>>>>>>>> If you got it directly from a store, then this should not be the
>>>>>>>>> case.
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> dmesg gives:
>>>>>>>>>>
>>>>>>>>>> Linux version 2.6.12-1.1376_FC3
>>>>>>>>>> (bhcompile@tweety.build.redhat.com)
>>>>>>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>>>>>>>>>> 23:27:26
>>>>>>>>>> EDT 2005
>>>>>>>>>> BIOS-provided physical RAM map:
>>>>>>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>>>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>>>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>>>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>>>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>>>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>>>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>>>>>>> 0MB HIGHMEM available.
>>>>>>>>>> 255MB LOWMEM available.
>>>>>>>>>> Using x86 segment limits to approximate NX protection
>>>>>>>>>> On node 0 totalpages: 65520
>>>>>>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>>>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>>>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>>>>>>> DMI 2.3 present.
>>>>>>>>>> ACPI: RSDP (v000 AMI ) @
>>>>>>>>>> 0x000fc570
>>>>>>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>>>>>>> 0x0fff0000
>>>>>>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>>>>>>> 0x0fff0030
>>>>>>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>>>>>>> 0x00000000
>>>>>>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is
>>>>>>>>>> required to
>>>>>>>>>> enable ACPI
>>>>>>>>>> ACPI: Disabling ACPI support
>>>>>>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>>>>>>> 10000000:efff0000)
>>>>>>>>>> Built 1 zonelists
>>>>>>>>>> Kernel command line: ro root=LABEL=/
>>>>>>>>>> Initializing CPU#0
>>>>>>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>>>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>>>>>>> Detected 798.270 MHz processor.
>>>>>>>>>> Using tsc for high-res timesource
>>>>>>>>>> Console: colour VGA+ 80x25
>>>>>>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>>>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>>>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k
>>>>>>>>>> reserved,
>>>>>>>>>> 694k data, 180k init, 0k highmem)
>>>>>>>>>> Checking if this processor honours the WP bit even in supervisor
>>>>>>>>>> mode... Ok.
>>>>>>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>>>>>>> Security Framework v1.0.0 initialized
>>>>>>>>>> SELinux: Initializing.
>>>>>>>>>> SELinux: Starting in permissive mode
>>>>>>>>>> selinux_register_security: Registering secondary module
>>>>>>>>>> capability
>>>>>>>>>> Capability LSM initialized as secondary
>>>>>>>>>> Mount-cache hash table entries: 512
>>>>>>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>>> 00000000
>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>>> 00000000
>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>>>>>>> CPU: L2 cache: 256K
>>>>>>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>> Intel machine check architecture supported.
>>>>>>>>>> Intel machine check reporting enabled on CPU#0.
>>>>>>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>>>>>>> Enabling fast FPU save and restore... done.
>>>>>>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>>>>>>> Checking 'hlt' instruction... OK.
>>>>>>>>>> checking if image is initramfs... it is
>>>>>>>>>> Freeing initrd memory: 399k freed
>>>>>>>>>> NET: Registered protocol family 16
>>>>>>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>>>>>>> PCI: Using configuration type 1
>>>>>>>>>> mtrr: v2.0 (20020519)
>>>>>>>>>> ACPI: Subsystem revision 20050729
>>>>>>>>>> ACPI: Interpreter disabled.
>>>>>>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>>>>>>> pnp: PnP ACPI: disabled
>>>>>>>>>> usbcore: registered new driver usbfs
>>>>>>>>>> usbcore: registered new driver hub
>>>>>>>>>> PCI: Probing PCI hardware
>>>>>>>>>> PCI: Probing PCI hardware (bus 00)
>>>>>>>>>> Boot video device is 0000:01:00.0
>>>>>>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>>>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>>>>>>> audit: initializing netlink socket (disabled)
>>>>>>>>>> audit(1125948457.147:1): initialized
>>>>>>>>>> Total HugeTLB memory allocated, 0
>>>>>>>>>> VFS: Disk quotas dquot_6.5.1
>>>>>>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>>>>>>> SELinux: Registering netfilter hooks
>>>>>>>>>> Initializing Cryptographic API
>>>>>>>>>> ksign: Installing public key data
>>>>>>>>>> Loading keyring
>>>>>>>>>> - Added public key ACD1A80A1D789A78
>>>>>>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>>>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>>>>>>> isapnp: Scanning for PnP cards...
>>>>>>>>>> isapnp: No Plug & Play device found
>>>>>>>>>> Real Time Clock Driver v1.12
>>>>>>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>>>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>>>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>>>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>>>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>>>>>>>> enabled
>>>>>>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>>>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>>>>>>> io scheduler noop registered
>>>>>>>>>> io scheduler anticipatory registered
>>>>>>>>>> io scheduler deadline registered
>>>>>>>>>> io scheduler cfq registered
>>>>>>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>>>>>>> blocksize
>>>>>>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>>>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>>>>>>> idebus=xx
>>>>>>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>>>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>>>>>>> VP_IDE: chipset revision 6
>>>>>>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>>>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>>>>>>> pci0000:00:07.1
>>>>>>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>>>>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>>>>>>>> Probing IDE interface ide0...
>>>>>>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>>>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>>>>>>> Probing IDE interface ide1...
>>>>>>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>>>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>>>>>>> hda: max request size: 128KiB
>>>>>>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache,
>>>>>>>>>> CHS=65535/16/63,
>>>>>>>>>> UDMA(33)
>>>>>>>>>> hda: cache flushes supported
>>>>>>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>>>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>>>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>>>>>>> ide-floppy driver 0.99.newide
>>>>>>>>>> usbcore: registered new driver hiddev
>>>>>>>>>> usbcore: registered new driver usbhid
>>>>>>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>>>>>>> mice: PS/2 mouse device common for all mice
>>>>>>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>>>>>>> NET: Registered protocol family 2
>>>>>>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>>>>>>> TCP established hash table entries: 16384 (order: 5, 131072
>>>>>>>>>> bytes)
>>>>>>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>>>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>>>>>>> Initializing IPsec netlink socket
>>>>>>>>>> NET: Registered protocol family 1
>>>>>>>>>> NET: Registered protocol family 17
>>>>>>>>>> Freeing unused kernel memory: 180k freed
>>>>>>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>> SELinux: Disabled at runtime.
>>>>>>>>>> SELinux: Unregistering netfilter hooks
>>>>>>>>>> Floppy drive(s): fd0 is 1.44M
>>>>>>>>>> FDC 0 is a post-1991 82077
>>>>>>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>>>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>>>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>>>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>>>>>>> USB Universal Host Controller Interface driver v2.2
>>>>>>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>>>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>>>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
>>>>>>>>>> number 1
>>>>>>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>>>>>>> hub 1-0:1.0: USB hub found
>>>>>>>>>> hub 1-0:1.0: 2 ports detected
>>>>>>>>>> md: Autodetecting RAID arrays.
>>>>>>>>>> md: autorun ...
>>>>>>>>>> md: ... autorun DONE.
>>>>>>>>>> EXT3 FS on hda5, internal journal
>>>>>>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>>>>>>> dm-devel@redhat.com
>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>> EXT3 FS on hda1, internal journal
>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>> EXT3 FS on hda2, internal journal
>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>> EXT3 FS on hda8, internal journal
>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>> EXT3 FS on hda3, internal journal
>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>>>>>>> parport_pc: VIA 686A/8231 detected
>>>>>>>>>> parport_pc: probing current configuration
>>>>>>>>>> parport_pc: Current parallel port base: 0x378
>>>>>>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>>>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>>>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>>>>>>> i2c /dev entries driver
>>>>>>>>>> NET: Registered protocol family 10
>>>>>>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>>>>>>> IPv6 over IPv4 tunneling driver
>>>>>>>>>> eth0: no IPv6 routers present
>>>>>>>>>> -
>>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>>>> linux-ide" in
>>>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>>>> More majordomo info at
>>>>>>>>>> http://vger.kernel.org/majordomo-info.html
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ___________________________________________________________
>>>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ___________________________________________________________
>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>
>>>>>>
>>>>>> -
>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>> linux-ide" in
>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ___________________________________________________________
>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>> anmelden: http://mail.yahoo.de
>>>>>
>>>>
>>>> -
>>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ___________________________________________________________
>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>> anmelden: http://mail.yahoo.de
>>> -
>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
> anmelden: http://mail.yahoo.de
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: UDMA5
2005-09-19 9:19 ` UDMA5 Riccardo Castellani
@ 2005-09-19 9:50 ` Stefan
2005-09-19 15:07 ` UDMA5 Riccardo Castellani
0 siblings, 1 reply; 2775+ messages in thread
From: Stefan @ 2005-09-19 9:50 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: linux-ide
>
>
> Now I have also this message !
>
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
Ok sounds like this drive has problems to run in this dma mode, I think
the maxtor is by default set to UDMA6 while your board only supports
UDMA5, use the maxtor tool to limit the trive to use UDMA5
and if that doesn't work test if it helps to switch to UDMA4.
I once had such a problem where a drive didn't want to work with the
controller if not set to the same modes, I had probs with windows and
linux that time.
>
>
>
>
>
>
> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> Cc: <linux-ide@vger.kernel.org>
> Sent: Thursday, September 08, 2005 5:55 PM
> Subject: Re:
>
>
>> Looks quite good, I checked the source of the via driver for your board
>> and there is no code that would limit it to udma2, so linux definitely
>> would enable udma5 if the rest of the components would work alright.
>>
>> So in my opinion there are three possibilities now, either the drive is
>> set to udma2(UDMA 33) or the cable is broken or the connector on the
>> motherboard for ide is broken.
>> If you got a boxed harddrive then you shouzld have a maxtor diagnose
>> floppy and I think it also has the feature on boadr to check and set
>> udma level, if not it should be available on their website, I have used
>> this tool before.
>>
>>
>> Riccardo Castellani wrote:
>>
>>> Gigabyte
>>> GA-6VXC7-4X-P rev. 5.2
>>>
>>> I see in dmseg:
>>>
>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>> EDT 2005
>>> BIOS-provided physical RAM map:
>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>> 0MB HIGHMEM available.
>>> 255MB LOWMEM available.
>>> Using x86 segment limits to approximate NX protection
>>> On node 0 totalpages: 65520
>>> DMA zone: 4096 pages, LIFO batch:1
>>> Normal zone: 61424 pages, LIFO batch:31
>>> HighMem zone: 0 pages, LIFO batch:1
>>> DMI 2.3 present.
>>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>> 0x0fff0000
>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>> 0x0fff0030
>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>> 0x00000000
>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>>> enable ACPI
>>> ACPI: Disabling ACPI support
>>> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
>>> Built 1 zonelists
>>> Kernel command line: ro root=LABEL=/
>>> Initializing CPU#0
>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>> Detected 798.155 MHz processor.
>>> Using tsc for high-res timesource
>>> Console: colour VGA+ 80x25
>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>>> 694k data, 180k init, 0k highmem)
>>> Checking if this processor honours the WP bit even in supervisor
>>> mode... Ok.
>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>> Security Framework v1.0.0 initialized
>>> SELinux: Initializing.
>>> SELinux: Starting in permissive mode
>>> selinux_register_security: Registering secondary module capability
>>> Capability LSM initialized as secondary
>>> Mount-cache hash table entries: 512
>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>>> 00000000 00000000 00000000
>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>>> 00000000 00000000 00000000
>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>> CPU: L2 cache: 256K
>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>> 00000000 00000000 00000000
>>> Intel machine check architecture supported.
>>> Intel machine check reporting enabled on CPU#0.
>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>> Enabling fast FPU save and restore... done.
>>> Enabling unmasked SIMD FPU exception support... done.
>>> Checking 'hlt' instruction... OK.
>>> checking if image is initramfs... it is
>>> Freeing initrd memory: 399k freed
>>> NET: Registered protocol family 16
>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>> PCI: Using configuration type 1
>>> mtrr: v2.0 (20020519)
>>> ACPI: Subsystem revision 20050729
>>> ACPI: Interpreter disabled.
>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>> pnp: PnP ACPI: disabled
>>> usbcore: registered new driver usbfs
>>> usbcore: registered new driver hub
>>> PCI: Probing PCI hardware
>>> PCI: Probing PCI hardware (bus 00)
>>> Boot video device is 0000:01:00.0
>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>> audit: initializing netlink socket (disabled)
>>> audit(1126182695.366:1): initialized
>>> Total HugeTLB memory allocated, 0
>>> VFS: Disk quotas dquot_6.5.1
>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>> SELinux: Registering netfilter hooks
>>> Initializing Cryptographic API
>>> ksign: Installing public key data
>>> Loading keyring
>>> - Added public key ACD1A80A1D789A78
>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>> isapnp: Scanning for PnP cards...
>>> isapnp: No Plug & Play device found
>>> Real Time Clock Driver v1.12
>>> Linux agpgart interface v0.101 (c) Dave Jones
>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>> PNP: No PS/2 controller found. Probing ports directly.
>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>> enabled
>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>> io scheduler noop registered
>>> io scheduler anticipatory registered
>>> io scheduler deadline registered
>>> io scheduler cfq registered
>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>> idebus=xx
>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>> VP_IDE: chipset revision 6
>>> VP_IDE: not 100% native mode: will probe irqs later
>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>> pci0000:00:07.1
>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>> Probing IDE interface ide0...
>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>> Probing IDE interface ide1...
>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>> ide1 at 0x170-0x177,0x376 on irq 15
>>> hda: max request size: 128KiB
>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>> UDMA(33)
>>> hda: cache flushes supported
>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>> Uniform CD-ROM driver Revision: 3.20
>>> ide-floppy driver 0.99.newide
>>> usbcore: registered new driver hiddev
>>> usbcore: registered new driver usbhid
>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>> mice: PS/2 mouse device common for all mice
>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>> NET: Registered protocol family 2
>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>> TCP: Hash tables configured (established 16384 bind 16384)
>>> Initializing IPsec netlink socket
>>> NET: Registered protocol family 1
>>> NET: Registered protocol family 17
>>> Freeing unused kernel memory: 180k freed
>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> input: PS/2 Generic Mouse on isa0060/serio1
>>> SELinux: Disabled at runtime.
>>> SELinux: Unregistering netfilter hooks
>>> Floppy drive(s): fd0 is 1.44M
>>> FDC 0 is a post-1991 82077
>>> 8139too Fast Ethernet driver 0.9.27
>>> PCI: Found IRQ 5 for device 0000:00:0a.0
>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 5
>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>> USB Universal Host Controller Interface driver v2.2
>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>> hub 1-0:1.0: USB hub found
>>> hub 1-0:1.0: 2 ports detected
>>> md: Autodetecting RAID arrays.
>>> md: autorun ...
>>> md: ... autorun DONE.
>>> EXT3 FS on hda5, internal journal
>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>> dm-devel@redhat.com
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda1, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda2, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda8, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> kjournald starting. Commit interval 5 seconds
>>> EXT3 FS on hda3, internal journal
>>> EXT3-fs: mounted filesystem with ordered data mode.
>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>> parport_pc: VIA 686A/8231 detected
>>> parport_pc: probing current configuration
>>> parport_pc: Current parallel port base: 0x378
>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>> ieee1394: Initialized config rom entry `ip1394'
>>> ip_tables: (C) 2000-2002 Netfilter core team
>>> ip_tables: (C) 2000-2002 Netfilter core team
>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>> i2c /dev entries driver
>>> NET: Registered protocol family 10
>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>> IPv6 over IPv4 tunneling driver
>>> eth0: no IPv6 routers present
>>>
>>>
>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>> Cc: <linux-ide@vger.kernel.org>
>>> Sent: Thursday, September 08, 2005 10:06 AM
>>> Subject: Re:
>>>
>>>
>>>> Riccardo Castellani wrote:
>>>>
>>>>> That's good idea ! I tried to Knoppix but it detects UDMA at 33 Mhz.
>>>>> I read in mothearboard manual that it supports until to UDMA 100 Mhz
>>>>
>>>>
>>>>
>>>>
>>>> What is the name of that motherboard and can you provide output of:
>>>>
>>>> lspci
>>>>
>>>>>
>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>> Sent: Thursday, September 08, 2005 3:21 AM
>>>>> Subject: Re:
>>>>>
>>>>>
>>>>>> What happens if you check udma level with a live cd like knoppix?
>>>>>>
>>>>>> Riccardo Castellani wrote:
>>>>>>
>>>>>>> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
>>>>>>> cable".
>>>>>>>
>>>>>>>
>>>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>>> Sent: Tuesday, September 06, 2005 1:00 PM
>>>>>>> Subject: Re:
>>>>>>>
>>>>>>>
>>>>>>>> Riccardo Castellani wrote:
>>>>>>>>
>>>>>>>>> I bought it directly from store.
>>>>>>>>> Several weeks ago I had problems with IDE cable and I could see
>>>>>>>>> UDMA5
>>>>>>>>> (with "hdparm" command) inside UDMA modes list. UDMA was the
>>>>>>>>> current
>>>>>>>>> active mode.
>>>>>>>>> Then I replaced 80- wire cable and I needed (for other reasons)
>>>>>>>>> again
>>>>>>>>> to reinstall operating system FC3 and now I'm here.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Well you probably answered the question yourself now, you must
>>>>>>>> have
>>>>>>>> installed a cable only capable of udma2/udma 33.
>>>>>>>> The older ide cables have sligthly thicker lines than the >udma2
>>>>>>>> cables,
>>>>>>>> they have the same connector and of course there are mire
>>>>>>>> connected
>>>>>>>> pins
>>>>>>>> on the >udma2
>>>>>>>> cables but you don't see that if looking at the connector.
>>>>>>>>
>>>>>>>>>
>>>>>>>>> ----- Original Message ----- From: "Stefan"
>>>>>>>>> <gentoopower@yahoo.de>
>>>>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>>>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>>>>>>>> Subject: Re:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Riccardo Castellani wrote:
>>>>>>>>>>
>>>>>>>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>>>>>>>> (Fedora Core 3)
>>>>>>>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>>>>>>>> WHY ? How Can I set to UDMA5 ?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> To change to udma5 run:
>>>>>>>>>>
>>>>>>>>>> hdparm -X udma5
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>>>>>>>
>>>>>>>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>>>>>>>> Config={ Fixed }
>>>>>>>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>>>>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16,
>>>>>>>>>>> MultSect=16
>>>>>>>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes,
>>>>>>>>>>> LBAsects=160086528
>>>>>>>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120},
>>>>>>>>>>> tDMA={min:120,rec:120}
>>>>>>>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>>>>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>>>>>>>> UDMA modes: udma0 udma1 *udma2
>>>>>>>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>>>>>>>> Drive conforms to: (null):
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Looks like the drive was switched to only support UDMA2, did
>>>>>>>>>> you
>>>>>>>>>> buy
>>>>>>>>>> this drive directly from store?
>>>>>>>>>> This drive can be set to only support udma2 with the help of
>>>>>>>>>> maxtors
>>>>>>>>>> utility, this is sometimes needed to fix problems with older
>>>>>>>>>> boards,
>>>>>>>>>> so if you bought this drive from someone, there is a chance,
>>>>>>>>>> that
>>>>>>>>>> this
>>>>>>>>>> person switched the udma mode for that drive.
>>>>>>>>>> If you got it directly from a store, then this should not be the
>>>>>>>>>> case.
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> dmesg gives:
>>>>>>>>>>>
>>>>>>>>>>> Linux version 2.6.12-1.1376_FC3
>>>>>>>>>>> (bhcompile@tweety.build.redhat.com)
>>>>>>>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>>>>>>>>>>> 23:27:26
>>>>>>>>>>> EDT 2005
>>>>>>>>>>> BIOS-provided physical RAM map:
>>>>>>>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>>>>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>>>>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>>>>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>>>>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>>>>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>>>>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>>>>>>>> 0MB HIGHMEM available.
>>>>>>>>>>> 255MB LOWMEM available.
>>>>>>>>>>> Using x86 segment limits to approximate NX protection
>>>>>>>>>>> On node 0 totalpages: 65520
>>>>>>>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>>>>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>>>>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>>>>>>>> DMI 2.3 present.
>>>>>>>>>>> ACPI: RSDP (v000 AMI ) @
>>>>>>>>>>> 0x000fc570
>>>>>>>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>>>>>>>> 0x0fff0000
>>>>>>>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>>>>>>>> 0x0fff0030
>>>>>>>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>>>>>>>> 0x00000000
>>>>>>>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is
>>>>>>>>>>> required to
>>>>>>>>>>> enable ACPI
>>>>>>>>>>> ACPI: Disabling ACPI support
>>>>>>>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>>>>>>>> 10000000:efff0000)
>>>>>>>>>>> Built 1 zonelists
>>>>>>>>>>> Kernel command line: ro root=LABEL=/
>>>>>>>>>>> Initializing CPU#0
>>>>>>>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>>>>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>>>>>>>> Detected 798.270 MHz processor.
>>>>>>>>>>> Using tsc for high-res timesource
>>>>>>>>>>> Console: colour VGA+ 80x25
>>>>>>>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>>>>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>>>>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k
>>>>>>>>>>> reserved,
>>>>>>>>>>> 694k data, 180k init, 0k highmem)
>>>>>>>>>>> Checking if this processor honours the WP bit even in
>>>>>>>>>>> supervisor
>>>>>>>>>>> mode... Ok.
>>>>>>>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>>>>>>>> Security Framework v1.0.0 initialized
>>>>>>>>>>> SELinux: Initializing.
>>>>>>>>>>> SELinux: Starting in permissive mode
>>>>>>>>>>> selinux_register_security: Registering secondary module
>>>>>>>>>>> capability
>>>>>>>>>>> Capability LSM initialized as secondary
>>>>>>>>>>> Mount-cache hash table entries: 512
>>>>>>>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>>>> 00000000
>>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>>>> 00000000
>>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>>>>>>>> CPU: L2 cache: 256K
>>>>>>>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>>> Intel machine check architecture supported.
>>>>>>>>>>> Intel machine check reporting enabled on CPU#0.
>>>>>>>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>>>>>>>> Enabling fast FPU save and restore... done.
>>>>>>>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>>>>>>>> Checking 'hlt' instruction... OK.
>>>>>>>>>>> checking if image is initramfs... it is
>>>>>>>>>>> Freeing initrd memory: 399k freed
>>>>>>>>>>> NET: Registered protocol family 16
>>>>>>>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>>>>>>>> PCI: Using configuration type 1
>>>>>>>>>>> mtrr: v2.0 (20020519)
>>>>>>>>>>> ACPI: Subsystem revision 20050729
>>>>>>>>>>> ACPI: Interpreter disabled.
>>>>>>>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>>>>>>>> pnp: PnP ACPI: disabled
>>>>>>>>>>> usbcore: registered new driver usbfs
>>>>>>>>>>> usbcore: registered new driver hub
>>>>>>>>>>> PCI: Probing PCI hardware
>>>>>>>>>>> PCI: Probing PCI hardware (bus 00)
>>>>>>>>>>> Boot video device is 0000:01:00.0
>>>>>>>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>>>>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>>>>>>>> audit: initializing netlink socket (disabled)
>>>>>>>>>>> audit(1125948457.147:1): initialized
>>>>>>>>>>> Total HugeTLB memory allocated, 0
>>>>>>>>>>> VFS: Disk quotas dquot_6.5.1
>>>>>>>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>>>>>>>> SELinux: Registering netfilter hooks
>>>>>>>>>>> Initializing Cryptographic API
>>>>>>>>>>> ksign: Installing public key data
>>>>>>>>>>> Loading keyring
>>>>>>>>>>> - Added public key ACD1A80A1D789A78
>>>>>>>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>>>>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>>>>>>>> isapnp: Scanning for PnP cards...
>>>>>>>>>>> isapnp: No Plug & Play device found
>>>>>>>>>>> Real Time Clock Driver v1.12
>>>>>>>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>>>>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>>>>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>>>>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>>>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>>>>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>>>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ
>>>>>>>>>>> sharing
>>>>>>>>>>> enabled
>>>>>>>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>>>>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>>>>>>>> io scheduler noop registered
>>>>>>>>>>> io scheduler anticipatory registered
>>>>>>>>>>> io scheduler deadline registered
>>>>>>>>>>> io scheduler cfq registered
>>>>>>>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>>>>>>>> blocksize
>>>>>>>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>>>>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override
>>>>>>>>>>> with
>>>>>>>>>>> idebus=xx
>>>>>>>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>>>>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>>>>>>>> VP_IDE: chipset revision 6
>>>>>>>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>>>>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>>>>>>>> pci0000:00:07.1
>>>>>>>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
>>>>>>>>>>> hdb:pio
>>>>>>>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio,
>>>>>>>>>>> hdd:DMA
>>>>>>>>>>> Probing IDE interface ide0...
>>>>>>>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>>>>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>>>>>>>> Probing IDE interface ide1...
>>>>>>>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>>>>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>>>>>>>> hda: max request size: 128KiB
>>>>>>>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache,
>>>>>>>>>>> CHS=65535/16/63,
>>>>>>>>>>> UDMA(33)
>>>>>>>>>>> hda: cache flushes supported
>>>>>>>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>>>>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>>>>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>>>>>>>> ide-floppy driver 0.99.newide
>>>>>>>>>>> usbcore: registered new driver hiddev
>>>>>>>>>>> usbcore: registered new driver usbhid
>>>>>>>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>>>>>>>> mice: PS/2 mouse device common for all mice
>>>>>>>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>>>>>>>> NET: Registered protocol family 2
>>>>>>>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>>>>>>>> TCP established hash table entries: 16384 (order: 5, 131072
>>>>>>>>>>> bytes)
>>>>>>>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>>>>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>>>>>>>> Initializing IPsec netlink socket
>>>>>>>>>>> NET: Registered protocol family 1
>>>>>>>>>>> NET: Registered protocol family 17
>>>>>>>>>>> Freeing unused kernel memory: 180k freed
>>>>>>>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>> SELinux: Disabled at runtime.
>>>>>>>>>>> SELinux: Unregistering netfilter hooks
>>>>>>>>>>> Floppy drive(s): fd0 is 1.44M
>>>>>>>>>>> FDC 0 is a post-1991 82077
>>>>>>>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>>>>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>>>>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>>>>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>>>>>>>> USB Universal Host Controller Interface driver v2.2
>>>>>>>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>>>>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>>>>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
>>>>>>>>>>> number 1
>>>>>>>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>>>>>>>> hub 1-0:1.0: USB hub found
>>>>>>>>>>> hub 1-0:1.0: 2 ports detected
>>>>>>>>>>> md: Autodetecting RAID arrays.
>>>>>>>>>>> md: autorun ...
>>>>>>>>>>> md: ... autorun DONE.
>>>>>>>>>>> EXT3 FS on hda5, internal journal
>>>>>>>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>>>>>>>> dm-devel@redhat.com
>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>> EXT3 FS on hda1, internal journal
>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>> EXT3 FS on hda2, internal journal
>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>> EXT3 FS on hda8, internal journal
>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>> EXT3 FS on hda3, internal journal
>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>>>>>>>> parport_pc: VIA 686A/8231 detected
>>>>>>>>>>> parport_pc: probing current configuration
>>>>>>>>>>> parport_pc: Current parallel port base: 0x378
>>>>>>>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>>>>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>>>>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>>>>>>>> i2c /dev entries driver
>>>>>>>>>>> NET: Registered protocol family 10
>>>>>>>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>>>>>>>> IPv6 over IPv4 tunneling driver
>>>>>>>>>>> eth0: no IPv6 routers present
>>>>>>>>>>> -
>>>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>>>>> linux-ide" in
>>>>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>>>>> More majordomo info at
>>>>>>>>>>> http://vger.kernel.org/majordomo-info.html
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ___________________________________________________________
>>>>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos -
>>>>>>>>>> Hier
>>>>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ___________________________________________________________
>>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>>
>>>>>>>
>>>>>>> -
>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>> linux-ide" in
>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ___________________________________________________________
>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>> anmelden: http://mail.yahoo.de
>>>>>>
>>>>>
>>>>> -
>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>> linux-ide" in
>>>>> the body of a message to majordomo@vger.kernel.org
>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ___________________________________________________________
>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>> anmelden: http://mail.yahoo.de
>>>> -
>>>> To unsubscribe from this list: send the line "unsubscribe
>>>> linux-ide" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>> -
>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>>
>>
>>
>>
>>
>> ___________________________________________________________
>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>> anmelden: http://mail.yahoo.de
>>
>
>
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: UDMA5
2005-09-19 9:50 ` UDMA5 Stefan
@ 2005-09-19 15:07 ` Riccardo Castellani
2005-09-19 15:16 ` UDMA5 Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-19 15:07 UTC (permalink / raw)
To: Stefan, Riccardo Castellani; +Cc: linux-ide
I run Maxtor MaxPower tool and HD test is ok.
I didn't see any settings to change UDMA mode.
I tried to run Knoppix live CD into machine and I had the same result: UDMA
2*
I put this disk into another hardware and It worked in UDMA 6 !!!
What do you think ?
----- Original Message -----
From: "Stefan" <gentoopower@yahoo.de>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: <linux-ide@vger.kernel.org>
Sent: Monday, September 19, 2005 11:50 AM
Subject: Re: UDMA5
>
>>
>>
>> Now I have also this message !
>>
>> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
>> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
>> ide: failed opcode was: unknown
>
>
> Ok sounds like this drive has problems to run in this dma mode, I think
> the maxtor is by default set to UDMA6 while your board only supports
> UDMA5, use the maxtor tool to limit the trive to use UDMA5
> and if that doesn't work test if it helps to switch to UDMA4.
>
> I once had such a problem where a drive didn't want to work with the
> controller if not set to the same modes, I had probs with windows and
> linux that time.
>
>>
>>
>>
>>
>>
>>
>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>> Cc: <linux-ide@vger.kernel.org>
>> Sent: Thursday, September 08, 2005 5:55 PM
>> Subject: Re:
>>
>>
>>> Looks quite good, I checked the source of the via driver for your board
>>> and there is no code that would limit it to udma2, so linux definitely
>>> would enable udma5 if the rest of the components would work alright.
>>>
>>> So in my opinion there are three possibilities now, either the drive is
>>> set to udma2(UDMA 33) or the cable is broken or the connector on the
>>> motherboard for ide is broken.
>>> If you got a boxed harddrive then you shouzld have a maxtor diagnose
>>> floppy and I think it also has the feature on boadr to check and set
>>> udma level, if not it should be available on their website, I have used
>>> this tool before.
>>>
>>>
>>> Riccardo Castellani wrote:
>>>
>>>> Gigabyte
>>>> GA-6VXC7-4X-P rev. 5.2
>>>>
>>>> I see in dmseg:
>>>>
>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>>> EDT 2005
>>>> BIOS-provided physical RAM map:
>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>> 0MB HIGHMEM available.
>>>> 255MB LOWMEM available.
>>>> Using x86 segment limits to approximate NX protection
>>>> On node 0 totalpages: 65520
>>>> DMA zone: 4096 pages, LIFO batch:1
>>>> Normal zone: 61424 pages, LIFO batch:31
>>>> HighMem zone: 0 pages, LIFO batch:1
>>>> DMI 2.3 present.
>>>> ACPI: RSDP (v000 AMI ) @ 0x000fc570
>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>> 0x0fff0000
>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>> 0x0fff0030
>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>> 0x00000000
>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to
>>>> enable ACPI
>>>> ACPI: Disabling ACPI support
>>>> Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
>>>> Built 1 zonelists
>>>> Kernel command line: ro root=LABEL=/
>>>> Initializing CPU#0
>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>> Detected 798.155 MHz processor.
>>>> Using tsc for high-res timesource
>>>> Console: colour VGA+ 80x25
>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k reserved,
>>>> 694k data, 180k init, 0k highmem)
>>>> Checking if this processor honours the WP bit even in supervisor
>>>> mode... Ok.
>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>> Security Framework v1.0.0 initialized
>>>> SELinux: Initializing.
>>>> SELinux: Starting in permissive mode
>>>> selinux_register_security: Registering secondary module capability
>>>> Capability LSM initialized as secondary
>>>> Mount-cache hash table entries: 512
>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>>>> 00000000 00000000 00000000
>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>>>> 00000000 00000000 00000000
>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>> CPU: L2 cache: 256K
>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>> 00000000 00000000 00000000
>>>> Intel machine check architecture supported.
>>>> Intel machine check reporting enabled on CPU#0.
>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>> Enabling fast FPU save and restore... done.
>>>> Enabling unmasked SIMD FPU exception support... done.
>>>> Checking 'hlt' instruction... OK.
>>>> checking if image is initramfs... it is
>>>> Freeing initrd memory: 399k freed
>>>> NET: Registered protocol family 16
>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>> PCI: Using configuration type 1
>>>> mtrr: v2.0 (20020519)
>>>> ACPI: Subsystem revision 20050729
>>>> ACPI: Interpreter disabled.
>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>> pnp: PnP ACPI: disabled
>>>> usbcore: registered new driver usbfs
>>>> usbcore: registered new driver hub
>>>> PCI: Probing PCI hardware
>>>> PCI: Probing PCI hardware (bus 00)
>>>> Boot video device is 0000:01:00.0
>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>> audit: initializing netlink socket (disabled)
>>>> audit(1126182695.366:1): initialized
>>>> Total HugeTLB memory allocated, 0
>>>> VFS: Disk quotas dquot_6.5.1
>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>> SELinux: Registering netfilter hooks
>>>> Initializing Cryptographic API
>>>> ksign: Installing public key data
>>>> Loading keyring
>>>> - Added public key ACD1A80A1D789A78
>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>> isapnp: Scanning for PnP cards...
>>>> isapnp: No Plug & Play device found
>>>> Real Time Clock Driver v1.12
>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing
>>>> enabled
>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>> io scheduler noop registered
>>>> io scheduler anticipatory registered
>>>> io scheduler deadline registered
>>>> io scheduler cfq registered
>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>> idebus=xx
>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>> VP_IDE: chipset revision 6
>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>> pci0000:00:07.1
>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>>>> Probing IDE interface ide0...
>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>> Probing IDE interface ide1...
>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>> hda: max request size: 128KiB
>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
>>>> UDMA(33)
>>>> hda: cache flushes supported
>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>> Uniform CD-ROM driver Revision: 3.20
>>>> ide-floppy driver 0.99.newide
>>>> usbcore: registered new driver hiddev
>>>> usbcore: registered new driver usbhid
>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>> mice: PS/2 mouse device common for all mice
>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>> NET: Registered protocol family 2
>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>> Initializing IPsec netlink socket
>>>> NET: Registered protocol family 1
>>>> NET: Registered protocol family 17
>>>> Freeing unused kernel memory: 180k freed
>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> input: PS/2 Generic Mouse on isa0060/serio1
>>>> SELinux: Disabled at runtime.
>>>> SELinux: Unregistering netfilter hooks
>>>> Floppy drive(s): fd0 is 1.44M
>>>> FDC 0 is a post-1991 82077
>>>> 8139too Fast Ethernet driver 0.9.27
>>>> PCI: Found IRQ 5 for device 0000:00:0a.0
>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 5
>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>> USB Universal Host Controller Interface driver v2.2
>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>> hub 1-0:1.0: USB hub found
>>>> hub 1-0:1.0: 2 ports detected
>>>> md: Autodetecting RAID arrays.
>>>> md: autorun ...
>>>> md: ... autorun DONE.
>>>> EXT3 FS on hda5, internal journal
>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>> dm-devel@redhat.com
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda1, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda2, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda8, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> kjournald starting. Commit interval 5 seconds
>>>> EXT3 FS on hda3, internal journal
>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>> parport_pc: VIA 686A/8231 detected
>>>> parport_pc: probing current configuration
>>>> parport_pc: Current parallel port base: 0x378
>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>> ieee1394: Initialized config rom entry `ip1394'
>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>> i2c /dev entries driver
>>>> NET: Registered protocol family 10
>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>> IPv6 over IPv4 tunneling driver
>>>> eth0: no IPv6 routers present
>>>>
>>>>
>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>> Cc: <linux-ide@vger.kernel.org>
>>>> Sent: Thursday, September 08, 2005 10:06 AM
>>>> Subject: Re:
>>>>
>>>>
>>>>> Riccardo Castellani wrote:
>>>>>
>>>>>> That's good idea ! I tried to Knoppix but it detects UDMA at 33 Mhz.
>>>>>> I read in mothearboard manual that it supports until to UDMA 100 Mhz
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> What is the name of that motherboard and can you provide output of:
>>>>>
>>>>> lspci
>>>>>
>>>>>>
>>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>> Sent: Thursday, September 08, 2005 3:21 AM
>>>>>> Subject: Re:
>>>>>>
>>>>>>
>>>>>>> What happens if you check udma level with a live cd like knoppix?
>>>>>>>
>>>>>>> Riccardo Castellani wrote:
>>>>>>>
>>>>>>>> I'm sure that I replaced old 80-wire cable with "newer 80-wire IDE
>>>>>>>> cable".
>>>>>>>>
>>>>>>>>
>>>>>>>> ----- Original Message ----- From: "Stefan" <gentoopower@yahoo.de>
>>>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>>>> Sent: Tuesday, September 06, 2005 1:00 PM
>>>>>>>> Subject: Re:
>>>>>>>>
>>>>>>>>
>>>>>>>>> Riccardo Castellani wrote:
>>>>>>>>>
>>>>>>>>>> I bought it directly from store.
>>>>>>>>>> Several weeks ago I had problems with IDE cable and I could see
>>>>>>>>>> UDMA5
>>>>>>>>>> (with "hdparm" command) inside UDMA modes list. UDMA was the
>>>>>>>>>> current
>>>>>>>>>> active mode.
>>>>>>>>>> Then I replaced 80- wire cable and I needed (for other reasons)
>>>>>>>>>> again
>>>>>>>>>> to reinstall operating system FC3 and now I'm here.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Well you probably answered the question yourself now, you must
>>>>>>>>> have
>>>>>>>>> installed a cable only capable of udma2/udma 33.
>>>>>>>>> The older ide cables have sligthly thicker lines than the >udma2
>>>>>>>>> cables,
>>>>>>>>> they have the same connector and of course there are mire
>>>>>>>>> connected
>>>>>>>>> pins
>>>>>>>>> on the >udma2
>>>>>>>>> cables but you don't see that if looking at the connector.
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ----- Original Message ----- From: "Stefan"
>>>>>>>>>> <gentoopower@yahoo.de>
>>>>>>>>>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>>>>>>>>>> Cc: <linux-ide@vger.kernel.org>
>>>>>>>>>> Sent: Tuesday, September 06, 2005 9:59 AM
>>>>>>>>>> Subject: Re:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> Riccardo Castellani wrote:
>>>>>>>>>>>
>>>>>>>>>>>> My HD supports U-ATA 133 while motherboard supports U-ATA 100.
>>>>>>>>>>>> (Fedora Core 3)
>>>>>>>>>>>> DMA works at 33 Mhz (UDMA2) !?!
>>>>>>>>>>>> WHY ? How Can I set to UDMA5 ?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> To change to udma5 run:
>>>>>>>>>>>
>>>>>>>>>>> hdparm -X udma5
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> With "hdparm -i /dev/hda" I can see:
>>>>>>>>>>>>
>>>>>>>>>>>> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
>>>>>>>>>>>> Config={ Fixed }
>>>>>>>>>>>> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
>>>>>>>>>>>> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16,
>>>>>>>>>>>> MultSect=16
>>>>>>>>>>>> CurCHS=4047/16/255, CurSects=16511760, LBA=yes,
>>>>>>>>>>>> LBAsects=160086528
>>>>>>>>>>>> IORDY=on/off, tPIO={min:120,w/IORDY:120},
>>>>>>>>>>>> tDMA={min:120,rec:120}
>>>>>>>>>>>> PIO modes: pio0 pio1 pio2 pio3 pio4
>>>>>>>>>>>> DMA modes: mdma0 mdma1 mdma2
>>>>>>>>>>>> UDMA modes: udma0 udma1 *udma2
>>>>>>>>>>>> AdvancedPM=yes: disabled (255) WriteCache=enabled
>>>>>>>>>>>> Drive conforms to: (null):
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Looks like the drive was switched to only support UDMA2, did
>>>>>>>>>>> you
>>>>>>>>>>> buy
>>>>>>>>>>> this drive directly from store?
>>>>>>>>>>> This drive can be set to only support udma2 with the help of
>>>>>>>>>>> maxtors
>>>>>>>>>>> utility, this is sometimes needed to fix problems with older
>>>>>>>>>>> boards,
>>>>>>>>>>> so if you bought this drive from someone, there is a chance,
>>>>>>>>>>> that
>>>>>>>>>>> this
>>>>>>>>>>> person switched the udma mode for that drive.
>>>>>>>>>>> If you got it directly from a store, then this should not be the
>>>>>>>>>>> case.
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> dmesg gives:
>>>>>>>>>>>>
>>>>>>>>>>>> Linux version 2.6.12-1.1376_FC3
>>>>>>>>>>>> (bhcompile@tweety.build.redhat.com)
>>>>>>>>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>>>>>>>>>>>> 23:27:26
>>>>>>>>>>>> EDT 2005
>>>>>>>>>>>> BIOS-provided physical RAM map:
>>>>>>>>>>>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>>>>>>>>>>>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>>>>>>>>>>>> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>>>>>>>>>>>> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>>>>>>>>>>>> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>>>>>>>>>>>> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>>>>>>>>>>>> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>>>>>>>>>>>> 0MB HIGHMEM available.
>>>>>>>>>>>> 255MB LOWMEM available.
>>>>>>>>>>>> Using x86 segment limits to approximate NX protection
>>>>>>>>>>>> On node 0 totalpages: 65520
>>>>>>>>>>>> DMA zone: 4096 pages, LIFO batch:1
>>>>>>>>>>>> Normal zone: 61424 pages, LIFO batch:31
>>>>>>>>>>>> HighMem zone: 0 pages, LIFO batch:1
>>>>>>>>>>>> DMI 2.3 present.
>>>>>>>>>>>> ACPI: RSDP (v000 AMI ) @
>>>>>>>>>>>> 0x000fc570
>>>>>>>>>>>> ACPI: RSDT (v001 AMIINT VIA_P6 0x00000010 MSFT 0x00000097) @
>>>>>>>>>>>> 0x0fff0000
>>>>>>>>>>>> ACPI: FADT (v001 AMIINT VIA_P6 0x00000011 MSFT 0x00000097) @
>>>>>>>>>>>> 0x0fff0030
>>>>>>>>>>>> ACPI: DSDT (v001 VIA APOLLO-P 0x00001000 MSFT 0x0100000b) @
>>>>>>>>>>>> 0x00000000
>>>>>>>>>>>> ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is
>>>>>>>>>>>> required to
>>>>>>>>>>>> enable ACPI
>>>>>>>>>>>> ACPI: Disabling ACPI support
>>>>>>>>>>>> Allocating PCI resources starting at 10000000 (gap:
>>>>>>>>>>>> 10000000:efff0000)
>>>>>>>>>>>> Built 1 zonelists
>>>>>>>>>>>> Kernel command line: ro root=LABEL=/
>>>>>>>>>>>> Initializing CPU#0
>>>>>>>>>>>> CPU 0 irqstacks, hard=c0447000 soft=c0446000
>>>>>>>>>>>> PID hash table entries: 1024 (order: 10, 16384 bytes)
>>>>>>>>>>>> Detected 798.270 MHz processor.
>>>>>>>>>>>> Using tsc for high-res timesource
>>>>>>>>>>>> Console: colour VGA+ 80x25
>>>>>>>>>>>> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>>>>>>>>>>> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>>>>>>>>>>> Memory: 254828k/262080k available (2450k kernel code, 6572k
>>>>>>>>>>>> reserved,
>>>>>>>>>>>> 694k data, 180k init, 0k highmem)
>>>>>>>>>>>> Checking if this processor honours the WP bit even in
>>>>>>>>>>>> supervisor
>>>>>>>>>>>> mode... Ok.
>>>>>>>>>>>> Calibrating delay loop... 1568.76 BogoMIPS (lpj=784384)
>>>>>>>>>>>> Security Framework v1.0.0 initialized
>>>>>>>>>>>> SELinux: Initializing.
>>>>>>>>>>>> SELinux: Starting in permissive mode
>>>>>>>>>>>> selinux_register_security: Registering secondary module
>>>>>>>>>>>> capability
>>>>>>>>>>>> Capability LSM initialized as secondary
>>>>>>>>>>>> Mount-cache hash table entries: 512
>>>>>>>>>>>> CPU: After generic identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>>>>> 00000000
>>>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>>>> CPU: After vendor identify, caps: 0383f9ff 00000000 00000000
>>>>>>>>>>>> 00000000
>>>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>>>> CPU: L1 I cache: 16K, L1 D cache: 16K
>>>>>>>>>>>> CPU: L2 cache: 256K
>>>>>>>>>>>> CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040
>>>>>>>>>>>> 00000000 00000000 00000000
>>>>>>>>>>>> Intel machine check architecture supported.
>>>>>>>>>>>> Intel machine check reporting enabled on CPU#0.
>>>>>>>>>>>> CPU: Intel Pentium III (Coppermine) stepping 06
>>>>>>>>>>>> Enabling fast FPU save and restore... done.
>>>>>>>>>>>> Enabling unmasked SIMD FPU exception support... done.
>>>>>>>>>>>> Checking 'hlt' instruction... OK.
>>>>>>>>>>>> checking if image is initramfs... it is
>>>>>>>>>>>> Freeing initrd memory: 399k freed
>>>>>>>>>>>> NET: Registered protocol family 16
>>>>>>>>>>>> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>>>>>>>>>>>> PCI: Using configuration type 1
>>>>>>>>>>>> mtrr: v2.0 (20020519)
>>>>>>>>>>>> ACPI: Subsystem revision 20050729
>>>>>>>>>>>> ACPI: Interpreter disabled.
>>>>>>>>>>>> Linux Plug and Play Support v0.97 (c) Adam Belay
>>>>>>>>>>>> pnp: PnP ACPI: disabled
>>>>>>>>>>>> usbcore: registered new driver usbfs
>>>>>>>>>>>> usbcore: registered new driver hub
>>>>>>>>>>>> PCI: Probing PCI hardware
>>>>>>>>>>>> PCI: Probing PCI hardware (bus 00)
>>>>>>>>>>>> Boot video device is 0000:01:00.0
>>>>>>>>>>>> PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
>>>>>>>>>>>> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>>>>>>>>>>>> audit: initializing netlink socket (disabled)
>>>>>>>>>>>> audit(1125948457.147:1): initialized
>>>>>>>>>>>> Total HugeTLB memory allocated, 0
>>>>>>>>>>>> VFS: Disk quotas dquot_6.5.1
>>>>>>>>>>>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>>>>>>>>>>>> SELinux: Registering netfilter hooks
>>>>>>>>>>>> Initializing Cryptographic API
>>>>>>>>>>>> ksign: Installing public key data
>>>>>>>>>>>> Loading keyring
>>>>>>>>>>>> - Added public key ACD1A80A1D789A78
>>>>>>>>>>>> - User ID: Red Hat, Inc. (Kernel Module GPG key)
>>>>>>>>>>>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>>>>>>>>>>>> isapnp: Scanning for PnP cards...
>>>>>>>>>>>> isapnp: No Plug & Play device found
>>>>>>>>>>>> Real Time Clock Driver v1.12
>>>>>>>>>>>> Linux agpgart interface v0.101 (c) Dave Jones
>>>>>>>>>>>> agpgart: Detected VIA Apollo Pro 133 chipset
>>>>>>>>>>>> agpgart: AGP aperture is 64M @ 0xe0000000
>>>>>>>>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>>>>>>>> serio: i8042 AUX port at 0x60,0x64 irq 12
>>>>>>>>>>>> serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>>>>>>>> Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ
>>>>>>>>>>>> sharing
>>>>>>>>>>>> enabled
>>>>>>>>>>>> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>>>>>>>>>> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>>>>>>>>>>>> io scheduler noop registered
>>>>>>>>>>>> io scheduler anticipatory registered
>>>>>>>>>>>> io scheduler deadline registered
>>>>>>>>>>>> io scheduler cfq registered
>>>>>>>>>>>> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
>>>>>>>>>>>> blocksize
>>>>>>>>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>>>>>>>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override
>>>>>>>>>>>> with
>>>>>>>>>>>> idebus=xx
>>>>>>>>>>>> VP_IDE: IDE controller at PCI slot 0000:00:07.1
>>>>>>>>>>>> PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>>>>>>>>>>>> VP_IDE: chipset revision 6
>>>>>>>>>>>> VP_IDE: not 100% native mode: will probe irqs later
>>>>>>>>>>>> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
>>>>>>>>>>>> pci0000:00:07.1
>>>>>>>>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
>>>>>>>>>>>> hdb:pio
>>>>>>>>>>>> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio,
>>>>>>>>>>>> hdd:DMA
>>>>>>>>>>>> Probing IDE interface ide0...
>>>>>>>>>>>> hda: Maxtor 6Y080L0, ATA DISK drive
>>>>>>>>>>>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>>>>>>>>>>> Probing IDE interface ide1...
>>>>>>>>>>>> hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
>>>>>>>>>>>> ide1 at 0x170-0x177,0x376 on irq 15
>>>>>>>>>>>> hda: max request size: 128KiB
>>>>>>>>>>>> hda: 160086528 sectors (81964 MB) w/2048KiB Cache,
>>>>>>>>>>>> CHS=65535/16/63,
>>>>>>>>>>>> UDMA(33)
>>>>>>>>>>>> hda: cache flushes supported
>>>>>>>>>>>> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>>>>>>>>>>>> hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>>>>>>>>>>>> Uniform CD-ROM driver Revision: 3.20
>>>>>>>>>>>> ide-floppy driver 0.99.newide
>>>>>>>>>>>> usbcore: registered new driver hiddev
>>>>>>>>>>>> usbcore: registered new driver usbhid
>>>>>>>>>>>> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>>>>>>>>>>>> mice: PS/2 mouse device common for all mice
>>>>>>>>>>>> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>>>>>>>>>>>> NET: Registered protocol family 2
>>>>>>>>>>>> IP: routing cache hash table of 512 buckets, 16Kbytes
>>>>>>>>>>>> TCP established hash table entries: 16384 (order: 5, 131072
>>>>>>>>>>>> bytes)
>>>>>>>>>>>> TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
>>>>>>>>>>>> TCP: Hash tables configured (established 16384 bind 16384)
>>>>>>>>>>>> Initializing IPsec netlink socket
>>>>>>>>>>>> NET: Registered protocol family 1
>>>>>>>>>>>> NET: Registered protocol family 17
>>>>>>>>>>>> Freeing unused kernel memory: 180k freed
>>>>>>>>>>>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>>> SELinux: Disabled at runtime.
>>>>>>>>>>>> SELinux: Unregistering netfilter hooks
>>>>>>>>>>>> Floppy drive(s): fd0 is 1.44M
>>>>>>>>>>>> FDC 0 is a post-1991 82077
>>>>>>>>>>>> 8139too Fast Ethernet driver 0.9.27
>>>>>>>>>>>> PCI: Found IRQ 9 for device 0000:00:0a.0
>>>>>>>>>>>> eth0: RealTek RTL8139 at 0xd800, 00:50:bf:5a:8d:bf, IRQ 9
>>>>>>>>>>>> eth0: Identified 8139 chip type 'RTL-8139C'
>>>>>>>>>>>> USB Universal Host Controller Interface driver v2.2
>>>>>>>>>>>> PCI: Found IRQ 11 for device 0000:00:07.2
>>>>>>>>>>>> uhci_hcd 0000:00:07.2: UHCI Host Controller
>>>>>>>>>>>> uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
>>>>>>>>>>>> number 1
>>>>>>>>>>>> uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dc00
>>>>>>>>>>>> hub 1-0:1.0: USB hub found
>>>>>>>>>>>> hub 1-0:1.0: 2 ports detected
>>>>>>>>>>>> md: Autodetecting RAID arrays.
>>>>>>>>>>>> md: autorun ...
>>>>>>>>>>>> md: ... autorun DONE.
>>>>>>>>>>>> EXT3 FS on hda5, internal journal
>>>>>>>>>>>> device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
>>>>>>>>>>>> dm-devel@redhat.com
>>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>>> EXT3 FS on hda1, internal journal
>>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>>> EXT3 FS on hda2, internal journal
>>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>>> EXT3 FS on hda8, internal journal
>>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>>> kjournald starting. Commit interval 5 seconds
>>>>>>>>>>>> EXT3 FS on hda3, internal journal
>>>>>>>>>>>> EXT3-fs: mounted filesystem with ordered data mode.
>>>>>>>>>>>> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
>>>>>>>>>>>> parport_pc: VIA 686A/8231 detected
>>>>>>>>>>>> parport_pc: probing current configuration
>>>>>>>>>>>> parport_pc: Current parallel port base: 0x378
>>>>>>>>>>>> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>>>>>>>>>>>> parport_pc: VIA parallel port: io=0x378, irq=7
>>>>>>>>>>>> ieee1394: Initialized config rom entry `ip1394'
>>>>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>>>>> ip_tables: (C) 2000-2002 Netfilter core team
>>>>>>>>>>>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>>>>>>>>>>> i2c /dev entries driver
>>>>>>>>>>>> NET: Registered protocol family 10
>>>>>>>>>>>> Disabled Privacy Extensions on device c03d60a0(lo)
>>>>>>>>>>>> IPv6 over IPv4 tunneling driver
>>>>>>>>>>>> eth0: no IPv6 routers present
>>>>>>>>>>>> -
>>>>>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>>>>>> linux-ide" in
>>>>>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>>>>>> More majordomo info at
>>>>>>>>>>>> http://vger.kernel.org/majordomo-info.html
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ___________________________________________________________
>>>>>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos -
>>>>>>>>>>> Hier
>>>>>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ___________________________________________________________
>>>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>>>
>>>>>>>>
>>>>>>>> -
>>>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>>>> linux-ide" in
>>>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ___________________________________________________________
>>>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>>>> anmelden: http://mail.yahoo.de
>>>>>>>
>>>>>>
>>>>>> -
>>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>>> linux-ide" in
>>>>>> the body of a message to majordomo@vger.kernel.org
>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ___________________________________________________________
>>>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>>>> anmelden: http://mail.yahoo.de
>>>>> -
>>>>> To unsubscribe from this list: send the line "unsubscribe
>>>>> linux-ide" in
>>>>> the body of a message to majordomo@vger.kernel.org
>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>
>>>> -
>>>> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ___________________________________________________________
>>> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
>>> anmelden: http://mail.yahoo.de
>>>
>>
>>
>
>
>
>
>
>
> ___________________________________________________________
> Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier
> anmelden: http://mail.yahoo.de
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: UDMA5
2005-09-19 15:07 ` UDMA5 Riccardo Castellani
@ 2005-09-19 15:16 ` Bartlomiej Zolnierkiewicz
2005-09-19 15:33 ` UDMA5 Riccardo Castellani
0 siblings, 1 reply; 2775+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2005-09-19 15:16 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: Stefan, linux-ide
On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
> I run Maxtor MaxPower tool and HD test is ok.
> I didn't see any settings to change UDMA mode.
> I tried to run Knoppix live CD into machine and I had the same result: UDMA
> 2*
> I put this disk into another hardware and It worked in UDMA 6 !!!
> What do you think ?
>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>>> EDT 2005
Try with *vanilla* kernel 2.6.13 or 2.6.14-rc1.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: UDMA5
2005-09-19 15:16 ` UDMA5 Bartlomiej Zolnierkiewicz
@ 2005-09-19 15:33 ` Riccardo Castellani
2005-09-19 15:36 ` UDMA5 Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-19 15:33 UTC (permalink / raw)
To: bzolnier, Riccardo Castellani; +Cc: Stefan, linux-ide
I think it's no kernel problem because after immediately POST stage (before
that GRUB is loaded) I see hard disk properties where UDMA is set to 2
value. PIO mode is set to 4.
----- Original Message -----
From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
Sent: Monday, September 19, 2005 5:16 PM
Subject: Re: UDMA5
> On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
>> I run Maxtor MaxPower tool and HD test is ok.
>> I didn't see any settings to change UDMA mode.
>> I tried to run Knoppix live CD into machine and I had the same result:
>> UDMA
>> 2*
>> I put this disk into another hardware and It worked in UDMA 6 !!!
>> What do you think ?
>
>>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
>>>>> EDT 2005
>
> Try with *vanilla* kernel 2.6.13 or 2.6.14-rc1.
>
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: UDMA5
2005-09-19 15:33 ` UDMA5 Riccardo Castellani
@ 2005-09-19 15:36 ` Bartlomiej Zolnierkiewicz
2005-09-19 17:27 ` UDMA5 Riccardo Castellani
2005-09-20 7:51 ` UDMA5 Riccardo Castellani
0 siblings, 2 replies; 2775+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2005-09-19 15:36 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: Stefan, linux-ide
On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
> I think it's no kernel problem because after immediately POST stage (before
> that GRUB is loaded) I see hard disk properties where UDMA is set to 2
> value. PIO mode is set to 4.
It is still worth to try (Linux VIA IDE driver overrides BIOS UDMA settings,
it depends only on BIOS doing the cable detection - but you can try booting
with "ide0=ata66" kernel parameter to force 80-wires cable).
> ----- Original Message -----
> From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
> Sent: Monday, September 19, 2005 5:16 PM
> Subject: Re: UDMA5
>
>
> > On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
> >> I run Maxtor MaxPower tool and HD test is ok.
> >> I didn't see any settings to change UDMA mode.
> >> I tried to run Knoppix live CD into machine and I had the same result:
> >> UDMA
> >> 2*
> >> I put this disk into another hardware and It worked in UDMA 6 !!!
> >> What do you think ?
> >
> >>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
> >>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26 23:27:26
> >>>>> EDT 2005
> >
> > Try with *vanilla* kernel 2.6.13 or 2.6.14-rc1.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: UDMA5
2005-09-19 15:36 ` UDMA5 Bartlomiej Zolnierkiewicz
@ 2005-09-19 17:27 ` Riccardo Castellani
2005-09-20 7:51 ` UDMA5 Riccardo Castellani
1 sibling, 0 replies; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-19 17:27 UTC (permalink / raw)
To: bzolnier, Riccardo Castellani; +Cc: Stefan, linux-ide
I tried booting with "ide0=ata66" kernel parameter to force 80-wires cable
but nothing.
udma2 is set !
----- Original Message -----
From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
Sent: Monday, September 19, 2005 5:36 PM
Subject: Re: UDMA5
> On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
>> I think it's no kernel problem because after immediately POST stage
>> (before
>> that GRUB is loaded) I see hard disk properties where UDMA is set to 2
>> value. PIO mode is set to 4.
>
> It is still worth to try (Linux VIA IDE driver overrides BIOS UDMA
> settings,
> it depends only on BIOS doing the cable detection - but you can try
> booting
> with "ide0=ata66" kernel parameter to force 80-wires cable).
>
>> ----- Original Message -----
>> From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>> Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
>> Sent: Monday, September 19, 2005 5:16 PM
>> Subject: Re: UDMA5
>>
>>
>> > On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
>> >> I run Maxtor MaxPower tool and HD test is ok.
>> >> I didn't see any settings to change UDMA mode.
>> >> I tried to run Knoppix live CD into machine and I had the same result:
>> >> UDMA
>> >> 2*
>> >> I put this disk into another hardware and It worked in UDMA 6 !!!
>> >> What do you think ?
>> >
>> >>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>> >>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>> >>>>> 23:27:26
>> >>>>> EDT 2005
>> >
>> > Try with *vanilla* kernel 2.6.13 or 2.6.14-rc1.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: UDMA5
2005-09-19 15:36 ` UDMA5 Bartlomiej Zolnierkiewicz
2005-09-19 17:27 ` UDMA5 Riccardo Castellani
@ 2005-09-20 7:51 ` Riccardo Castellani
2005-09-20 7:54 ` UDMA5 Bartlomiej Zolnierkiewicz
1 sibling, 1 reply; 2775+ messages in thread
From: Riccardo Castellani @ 2005-09-20 7:51 UTC (permalink / raw)
To: bzolnier, Riccardo Castellani; +Cc: Stefan, linux-ide
I replaced again 80 wire cable with another one for the fourth time.
I tried to connect IDE cable inverting side ends.
Now It works alright.
Thanks
hdparm -i /dev/hda gets:
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):
* signifies the current active mode
But in dmesg I saw:
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide0: reset: success
why this error ?
----- Original Message -----
From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
Sent: Monday, September 19, 2005 5:36 PM
Subject: Re: UDMA5
> On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
>> I think it's no kernel problem because after immediately POST stage
>> (before
>> that GRUB is loaded) I see hard disk properties where UDMA is set to 2
>> value. PIO mode is set to 4.
>
> It is still worth to try (Linux VIA IDE driver overrides BIOS UDMA
> settings,
> it depends only on BIOS doing the cable detection - but you can try
> booting
> with "ide0=ata66" kernel parameter to force 80-wires cable).
>
>> ----- Original Message -----
>> From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
>> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
>> Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
>> Sent: Monday, September 19, 2005 5:16 PM
>> Subject: Re: UDMA5
>>
>>
>> > On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
>> >> I run Maxtor MaxPower tool and HD test is ok.
>> >> I didn't see any settings to change UDMA mode.
>> >> I tried to run Knoppix live CD into machine and I had the same result:
>> >> UDMA
>> >> 2*
>> >> I put this disk into another hardware and It worked in UDMA 6 !!!
>> >> What do you think ?
>> >
>> >>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
>> >>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
>> >>>>> 23:27:26
>> >>>>> EDT 2005
>> >
>> > Try with *vanilla* kernel 2.6.13 or 2.6.14-rc1.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: UDMA5
2005-09-20 7:51 ` UDMA5 Riccardo Castellani
@ 2005-09-20 7:54 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 2775+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2005-09-20 7:54 UTC (permalink / raw)
To: Riccardo Castellani; +Cc: Stefan, linux-ide
On 9/20/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
> I replaced again 80 wire cable with another one for the fourth time.
> I tried to connect IDE cable inverting side ends.
> Now It works alright.
> Thanks
>
> hdparm -i /dev/hda gets:
>
> Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y23TZR2C
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
> CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=160086528
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5 udma6
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive conforms to: (null):
>
> * signifies the current active mode
>
>
> But in dmesg I saw:
>
> EXT3 FS on hda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 1052216k swap on /dev/hda7. Priority:-1 extents:1
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> ide0: reset: success
>
> why this error ?
Bad CRC detected during transfer (usually bad cable).
> ----- Original Message -----
> From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
> Sent: Monday, September 19, 2005 5:36 PM
> Subject: Re: UDMA5
>
>
> > On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
> >> I think it's no kernel problem because after immediately POST stage
> >> (before
> >> that GRUB is loaded) I see hard disk properties where UDMA is set to 2
> >> value. PIO mode is set to 4.
> >
> > It is still worth to try (Linux VIA IDE driver overrides BIOS UDMA
> > settings,
> > it depends only on BIOS doing the cable detection - but you can try
> > booting
> > with "ide0=ata66" kernel parameter to force 80-wires cable).
> >
> >> ----- Original Message -----
> >> From: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
> >> To: "Riccardo Castellani" <r.castellani@usl6.toscana.it>
> >> Cc: "Stefan" <gentoopower@yahoo.de>; <linux-ide@vger.kernel.org>
> >> Sent: Monday, September 19, 2005 5:16 PM
> >> Subject: Re: UDMA5
> >>
> >>
> >> > On 9/19/05, Riccardo Castellani <r.castellani@usl6.toscana.it> wrote:
> >> >> I run Maxtor MaxPower tool and HD test is ok.
> >> >> I didn't see any settings to change UDMA mode.
> >> >> I tried to run Knoppix live CD into machine and I had the same result:
> >> >> UDMA
> >> >> 2*
> >> >> I put this disk into another hardware and It worked in UDMA 6 !!!
> >> >> What do you think ?
> >> >
> >> >>>>> Linux version 2.6.12-1.1376_FC3 (bhcompile@tweety.build.redhat.com)
> >> >>>>> (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 Fri Aug 26
> >> >>>>> 23:27:26
> >> >>>>> EDT 2005
> >> >
> >> > Try with *vanilla* kernel 2.6.13 or 2.6.14-rc1.
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
>
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-07-27 13:54 Grace Bunyan
0 siblings, 0 replies; 2775+ messages in thread
From: Grace Bunyan @ 2016-07-27 13:54 UTC (permalink / raw)
Greeting, Did you receive the fund letter i send you last? from Grace Bunyan
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-07-28 6:11 Paul Mackerras
0 siblings, 0 replies; 2775+ messages in thread
From: Paul Mackerras @ 2016-07-28 6:11 UTC (permalink / raw)
To: kvm, kvm-ppc
These two patches fix a denial-of-service vulnerability in the host
kernel when running guests using HV-style KVM on POWER8 machines.
It turns out that if a user process starts a transaction and then
does an exec system call, it can not only crash the guest kernel
but also cause one or more host CPUs to hang. This vulnerability
has been assigned the ID CVE-2016-5412. This patch series is the
fix for the vulnerability. I would like to get these patches into
v4.8-rc1 and also into the stable trees.
Paul.
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 462 +++++++++++++++++---------------
1 file changed, 250 insertions(+), 212 deletions(-)
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-07-28 17:49 Ryan
0 siblings, 0 replies; 2775+ messages in thread
From: Ryan @ 2016-07-28 17:49 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
auth 74e10dbf subscribe devicetree ryanphilips19-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-08-09 7:32 Emily Deng
0 siblings, 0 replies; 2775+ messages in thread
From: Emily Deng @ 2016-08-09 7:32 UTC (permalink / raw)
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW; +Cc: Emily Deng
Add PCI domains compare and replace strncmp with strcmp.
Subject: [PATCH v2] drm/amdgpu: Change the virtual_display type from int to
char*.
For virtual display feature, as there may be mutiple GPUs,
for user could choose whiche GPU need to enable this feature, change
the type of virtual_display from int to char*. The variable will be set
like this virtual_display="xxxx:xx:xx.x;xxxx:xx:xx.x;".
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu.h | 3 ++-
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 27 ++++++++++++++++++++++++++-
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 6 +++---
drivers/gpu/drm/amd/amdgpu/cik.c | 2 +-
drivers/gpu/drm/amd/amdgpu/vi.c | 2 +-
5 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index c309eaf..b6bed4e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -93,7 +93,7 @@ extern unsigned amdgpu_pcie_lane_cap;
extern unsigned amdgpu_cg_mask;
extern unsigned amdgpu_pg_mask;
extern int amdgpu_sclk_deep_sleep_en;
-extern int amdgpu_virtual_display;
+extern char *amdgpu_virtual_display;
#define AMDGPU_WAIT_IDLE_TIMEOUT_IN_MS 3000
#define AMDGPU_MAX_USEC_TIMEOUT 100000 /* 100 ms */
@@ -2142,6 +2142,7 @@ struct amdgpu_device {
struct kfd_dev *kfd;
struct amdgpu_virtualization virtualization;
+ int enable_virtual_display;
};
bool amdgpu_device_is_px(struct drm_device *dev);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 68cce12..4d9c033 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -47,6 +47,7 @@
#endif
#include "vi.h"
#include "bif/bif_4_1_d.h"
+#include <linux/pci.h>
static int amdgpu_debugfs_regs_init(struct amdgpu_device *adev);
static void amdgpu_debugfs_regs_cleanup(struct amdgpu_device *adev);
@@ -1182,11 +1183,35 @@ int amdgpu_ip_block_version_cmp(struct amdgpu_device *adev,
return 1;
}
+static void amdgpu_whether_enable_virtual_display(struct amdgpu_device *adev)
+{
+ adev->enable_virtual_display = 0;
+
+ if (amdgpu_virtual_display) {
+ struct drm_device *ddev = adev->ddev;
+ const char *pci_address_name = pci_name(ddev->pdev);
+ char *pciaddstr, *pciaddstr_tmp, *pciaddname;
+
+ pciaddstr = kstrdup(amdgpu_virtual_display, GFP_KERNEL);
+ pciaddstr_tmp = pciaddstr;
+ while ((pciaddname = strsep(&pciaddstr_tmp, ";"))) {
+ if (!strcmp(pci_address_name, pciaddname)) {
+ adev->enable_virtual_display = 1;
+ break;
+ }
+ }
+
+ DRM_INFO("virtual display string:%s, %s:virtual_display:%d\n", amdgpu_virtual_display, pci_address_name, adev->enable_virtual_display);
+
+ kfree(pciaddstr);
+ }
+}
+
static int amdgpu_early_init(struct amdgpu_device *adev)
{
int i, r;
- DRM_INFO("virtual display enabled:%d\n", amdgpu_virtual_display);
+ amdgpu_whether_enable_virtual_display(adev);
switch (adev->asic_type) {
case CHIP_TOPAZ:
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 7007cf7..209a539 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -90,7 +90,7 @@ unsigned amdgpu_pcie_gen_cap = 0;
unsigned amdgpu_pcie_lane_cap = 0;
unsigned amdgpu_cg_mask = 0xffffffff;
unsigned amdgpu_pg_mask = 0xffffffff;
-int amdgpu_virtual_display = 0;
+char *amdgpu_virtual_display = NULL;
MODULE_PARM_DESC(vramlimit, "Restrict VRAM for testing, in megabytes");
module_param_named(vramlimit, amdgpu_vram_limit, int, 0600);
@@ -190,8 +190,8 @@ module_param_named(cg_mask, amdgpu_cg_mask, uint, 0444);
MODULE_PARM_DESC(pg_mask, "Powergating flags mask (0 = disable power gating)");
module_param_named(pg_mask, amdgpu_pg_mask, uint, 0444);
-MODULE_PARM_DESC(virtual_display, "enable virtual display (0 = disable virtual display)");
-module_param_named(virtual_display, amdgpu_virtual_display, int, 0444);
+MODULE_PARM_DESC(virtual_display, "Enable virtual display feature (the virtual_display will be set like xxxx:xx:xx.x;xxxx:xx:xx.x)");
+module_param_named(virtual_display, amdgpu_virtual_display, charp, 0444);
static const struct pci_device_id pciidlist[] = {
#ifdef CONFIG_DRM_AMDGPU_CIK
diff --git a/drivers/gpu/drm/amd/amdgpu/cik.c b/drivers/gpu/drm/amd/amdgpu/cik.c
index 84caa3f..a9fc2bb 100644
--- a/drivers/gpu/drm/amd/amdgpu/cik.c
+++ b/drivers/gpu/drm/amd/amdgpu/cik.c
@@ -2464,7 +2464,7 @@ static const struct amdgpu_ip_block_version kaveri_ip_blocks_vd[] =
int cik_set_ip_blocks(struct amdgpu_device *adev)
{
- if (amdgpu_virtual_display) {
+ if (adev->enable_virtual_display) {
amdgpu_dal = 0;
switch (adev->asic_type) {
case CHIP_BONAIRE:
diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
index 224e8a0..b9da2c7 100644
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -1730,7 +1730,7 @@ static const struct amdgpu_ip_block_version fiji_ip_blocks_dal[] =
int vi_set_ip_blocks(struct amdgpu_device *adev)
{
- if (amdgpu_virtual_display) {
+ if (adev->enable_virtual_display) {
amdgpu_dal = 0;
switch (adev->asic_type) {
case CHIP_TOPAZ:
--
1.9.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown)
@ 2016-08-09 9:13 关淼官
0 siblings, 0 replies; 2775+ messages in thread
From: 关淼官 @ 2016-08-09 9:13 UTC (permalink / raw)
To: linux-nvdimm
[-- Attachment #1: Type: text/plain, Size: 68 bytes --]
°²È«ÊÇÆóÒµ×ʲúÇ°ÃæµÄ¡°1¡± ºóÃæÔÙ¶àµÄ¡°0¡± ûÓÐǰûµÄ¡°1¡±Ò²ÊÇÿÓõÄ
[-- Attachment #2: Type: text/plain, Size: 178 bytes --]
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-08-16 1:28 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2016-08-16 1:28 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 945665.zip --]
[-- Type: application/zip, Size: 1462 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <408717014.902633.1454965557404.JavaMail.yahoo.ref@mail.yahoo.com>]
* (unknown),
@ 2016-08-16 23:57 robert.berry
0 siblings, 0 replies; 2775+ messages in thread
From: robert.berry @ 2016-08-16 23:57 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: leulinux-ide.zip --]
[-- Type: application/zip, Size: 3958 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-08-17 0:13 piwet_sokolow
0 siblings, 0 replies; 2775+ messages in thread
From: piwet_sokolow @ 2016-08-17 0:13 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: yjalinux-pm.zip --]
[-- Type: application/zip, Size: 3434 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-08-24 21:57 mariobronti
0 siblings, 0 replies; 2775+ messages in thread
From: mariobronti @ 2016-08-24 21:57 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: kuslinux-ide.zip --]
[-- Type: application/zip, Size: 3086 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-08-30 3:08 耿航
0 siblings, 0 replies; 2775+ messages in thread
From: 耿航 @ 2016-08-30 3:08 UTC (permalink / raw)
To: ceph-devel
subscribe ceph-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-08-30 10:42 Charls D. Chap
0 siblings, 0 replies; 2775+ messages in thread
From: Charls D. Chap @ 2016-08-30 10:42 UTC (permalink / raw)
To: kvm
Hello,
It's not clear to me, how is the virtual interrupt injection occurs.
For block I/O cases, virtio and full virtualization
I know the call graph for both cases MSI, pci legacy.
My question is: How QEMU notifies the guest?
How the worker thread(iothread or mainloop thread) is going to inject
the interrupt to vcpu.
vcpu at this time is executing, so it's is in running state.
It needs to change context and jump to interrupt handler.
How is this change from non-root process context to non-root interrupt
context happens?
1) In full-virtualization block io
2) in virtio-blk io
For example the issue path in the second case, is clearer, it's a write to
a register in pci configuration space (kick).
Maybe it's implemented in the following calls(?)
msix_notify or pci_set_irq or in the implementation of the ioctls that
these two calls invokes in the end.
Thanks in advance!
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-08-30 15:53 Iaroslav Gridin
0 siblings, 0 replies; 2775+ messages in thread
From: Iaroslav Gridin @ 2016-08-30 15:53 UTC (permalink / raw)
To: herbert
Cc: davem, linux-crypto, linux-kernel, andy.gross, david.brown,
linux-arm-msm, linux-soc
This set of patches fixes QCE digest code, preventing lockups and incorrect results.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-09-05 15:21 Christoph Hellwig
0 siblings, 0 replies; 2775+ messages in thread
From: Christoph Hellwig @ 2016-09-05 15:21 UTC (permalink / raw)
To: tj; +Cc: dan.j.williamps, rrichter, linux-ide
Hi Tejun,
this patch converts the ahci driver to use the new PCI MSI/MSI-X
vector allocator. Note that you need to first pull 4.8-rc4 or -rc5
into the libata for-4.9 branch as it depends on changes added to
mainline after that branch started.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-09-08 5:16 Mail Administrator
0 siblings, 0 replies; 2775+ messages in thread
From: Mail Administrator @ 2016-09-08 5:16 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
[-- Attachment #1: Type: text/plain, Size: 1805 bytes --]
Spam detection software, running on the system "blaine.gmane.org",
has identified this incoming email as possible spam. The original
message has been attached to this so you can view it or label
similar future email. If you have any questions, see
@@CONTACT_ADDRESS@@ for details.
Content preview: Your message could not be delivered Linux-nvdimm mailing list
Linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org https://lists.01.org/mailman/listinfo/linux-nvdimm
[...]
Content analysis details: (7.1 points, 5.0 required)
pts rule name description
---- ---------------------- --------------------------------------------------
0.0 URIBL_BLOCKED ADMINISTRATOR NOTICE: The query to URIBL was blocked.
See
http://wiki.apache.org/spamassassin/DnsBlocklists#dnsbl-block
for more information.
[URIs: 01.org]
0.8 RCVD_IN_SORBS_WEB RBL: SORBS: sender is an abusable web server
[103.204.166.162 listed in dnsbl.sorbs.net]
-0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no
trust
[198.145.21.10 listed in list.dnswl.org]
0.1 RCVD_IN_SBL RBL: Received via a relay in Spamhaus SBL
[103.204.166.162 listed in zen.spamhaus.org]
-0.6 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain
-0.0 BAYES_20 BODY: Bayes spam probability is 5 to 20%
[score: 0.1942]
2.2 AXB_XMAILER_MIMEOLE_OL_024C2 No description available.
2.6 MSOE_MID_WRONG_CASE No description available.
1.9 FORGED_MUA_OUTLOOK Forged mail pretending to be from MS Outlook
[-- Attachment #2: original message before SpamAssassin --]
[-- Type: message/rfc822, Size: 2518 bytes --]
From: "Mail Administrator" <MAILER-DAEMON-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
Subject:
Date: Thu, 8 Sep 2016 10:46:00 +0530
Message-ID: <20160908051654.87ABD1A1F49-y27Ovi1pjclAfugRpC6u6w@public.gmane.org>
Your message could not be delivered
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2016-09-12 10:34 LAGOLI WARLORD
0 siblings, 0 replies; 2775+ messages in thread
From: LAGOLI WARLORD @ 2016-09-12 10:34 UTC (permalink / raw)
MY BELOVED ONE,
PLEASE I NEED YOU TO HELP ME. I WILL GIVE YOU DETAILS WHEN I GET
RESPONSE FROM YOU.
Yours Sincerely
Miss Lagoli Warlord Ibrahim Coulibaly.
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-09-17 8:07 makafe david
0 siblings, 0 replies; 2775+ messages in thread
From: makafe david @ 2016-09-17 8:07 UTC (permalink / raw)
Hello!
I have something I wanna share with you. Kindly reply back if interested.
Thank you!!
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-09-17 19:57 Chris Clemons
0 siblings, 0 replies; 2775+ messages in thread
From: Chris Clemons @ 2016-09-17 19:57 UTC (permalink / raw)
To: linux-bcache
subscribe bcachefs
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-09-17 20:00 Chris Clemons
0 siblings, 0 replies; 2775+ messages in thread
From: Chris Clemons @ 2016-09-17 20:00 UTC (permalink / raw)
To: linux-bcache
subscribe
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <1249740555.16389143.1471515189580.JavaMail.yahoo.ref@mail.yahoo.com>]
* (unknown),
@ 2016-09-30 14:37 Maxime Ripard
0 siblings, 0 replies; 2775+ messages in thread
From: Maxime Ripard @ 2016-09-30 14:37 UTC (permalink / raw)
To: Rob Herring, Daniel Vetter, David Airlie, Archit Taneja
Cc: devicetree, dri-devel, Chen-Yu Tsai, Maxime Ripard,
linux-arm-kernel
Subject: [PATCH v5 0/5] drm: Add Support for Passive RGB to VGA bridges
Hi,
This serie is about adding support for the RGB to VGA bridge found in
the A13-Olinuxino and the CHIP VGA adapter.
Both these boards rely on an entirely passive bridge made out of
resitor ladders that do not require any initialisation. The only thing
needed is to get the timings from the screen if available (and if not,
fall back on XGA standards), set up the display pipeline to output on
the RGB bus with the proper timings, and you're done.
This serie also fixes a bunch of bugs uncovered when trying to
increase the resolution, and hence the pixel clock, of our
pipeline. It also fixes a few bugs in the DRM driver itself that went
unnoticed before.
Let me know what you think,
Maxime
Changes from v4:
- Removed unused functions
Changes from v3:
- Depends on OF in Kconfig
- Fixed typos in the driver comments
- Removed the mention of a "passive" bridge in the bindings doc
- Made the strcuture const
- Removed the nops and best_encoders implementations
- Removed the call to drm_bridge_enable in the sun4i driver
Changes from v2:
- Changed the compatible as suggested
- Rebased on top 4.8
Changes from v1:
- Switch to using a vga-connector
- Use drm_encoder bridge pointer instead of doing our own
- Report the connector status as unknown instead of connected by
default, and as connected only if we can retrieve the EDID.
- Switch to of_i2c_get_adapter by node, and put the reference when done
- Rebased on linux-next
Maxime Ripard (5):
drm/sun4i: rgb: Remove the bridge enable/disable functions
drm/bridge: Add RGB to VGA bridge support
ARM: sun5i: a13-olinuxino: Enable VGA bridge
ARM: multi_v7: enable VGA bridge
ARM: sunxi: Enable VGA bridge
.../bindings/display/bridge/rgb-to-vga-bridge.txt | 48 +++++
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 54 +++++
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/configs/sunxi_defconfig | 1 +
drivers/gpu/drm/bridge/Kconfig | 7 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/rgb-to-vga.c | 229 +++++++++++++++++++++
drivers/gpu/drm/sun4i/sun4i_rgb.c | 6 -
8 files changed, 341 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/rgb-to-vga-bridge.txt
create mode 100644 drivers/gpu/drm/bridge/rgb-to-vga.c
--
2.9.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2016-10-11 3:08 李 剑宇
0 siblings, 0 replies; 2775+ messages in thread
From: 李 剑宇 @ 2016-10-11 3:08 UTC (permalink / raw)
To: ceph-devel@vger.kernel.org
subscribe ceph-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-21 3:49 alters
0 siblings, 0 replies; 2775+ messages in thread
From: alters @ 2016-10-21 3:49 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_60218631287406_linux-scsi.zip --]
[-- Type: application/zip, Size: 4540 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-21 6:09 paloma.depping
0 siblings, 0 replies; 2775+ messages in thread
From: paloma.depping @ 2016-10-21 6:09 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_8059230588653_linux-ext4.zip --]
[-- Type: application/zip, Size: 4540 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-22 3:42 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2016-10-22 3:42 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_857737881499127_linux-arch.zip --]
[-- Type: application/zip, Size: 6431 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-22 10:32 brucet
0 siblings, 0 replies; 2775+ messages in thread
From: brucet @ 2016-10-22 10:32 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_21401227399_linux-bcache.zip --]
[-- Type: application/zip, Size: 5476 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-22 14:52 ifalqi
0 siblings, 0 replies; 2775+ messages in thread
From: ifalqi @ 2016-10-22 14:52 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_42787235909309_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 6022 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-22 17:11 Aisha Aisha
0 siblings, 0 replies; 2775+ messages in thread
From: Aisha Aisha @ 2016-10-22 17:11 UTC (permalink / raw)
I pray this mail reach you in good faith, I need you to assist me
relocate $9 Million to your country through your bank account and you
will be rewarded with 30% of the sum once the transaction is
successfully done, let me know if you are capable to handle the
project so that i will give you details.
Regards,
Aisha G.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-22 18:26 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2016-10-22 18:26 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_6923158673_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 5010 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-22 21:34 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2016-10-22 21:34 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_67034075_linux-bcache.zip --]
[-- Type: application/zip, Size: 2900 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-23 0:53 office
0 siblings, 0 replies; 2775+ messages in thread
From: office @ 2016-10-23 0:53 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: EMAIL_336414432_linux-leds.zip --]
[-- Type: application/zip, Size: 2748 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-23 3:08 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2016-10-23 3:08 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_1047713194274_linux-arch.zip --]
[-- Type: application/zip, Size: 2721 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-23 3:55 patientcentral
0 siblings, 0 replies; 2775+ messages in thread
From: patientcentral @ 2016-10-23 3:55 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_3055908206735_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 2704 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-23 18:32 alters
0 siblings, 0 replies; 2775+ messages in thread
From: alters @ 2016-10-23 18:32 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_555627325_linux-scsi.zip --]
[-- Type: application/zip, Size: 2762 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-24 2:58 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2016-10-24 2:58 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_18115775731340_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 4877 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-24 5:59 kgbok.kezyhumh
0 siblings, 0 replies; 2775+ messages in thread
From: kgbok.kezyhumh @ 2016-10-24 5:59 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: EMAIL_60424_linux-pm.zip --]
[-- Type: application/zip, Size: 5048 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-24 13:32 j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
0 siblings, 0 replies; 2775+ messages in thread
From: j.lahoda-aRb0bU7PRFPrBKCeMvbIDA @ 2016-10-24 13:32 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_270899766_linux-efi.zip --]
[-- Type: application/zip, Size: 5142 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-25 17:17 mariobronti
0 siblings, 0 replies; 2775+ messages in thread
From: mariobronti @ 2016-10-25 17:17 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_26515359826_linux-ide.zip --]
[-- Type: application/zip, Size: 5747 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-26 0:20 eumann
0 siblings, 0 replies; 2775+ messages in thread
From: eumann @ 2016-10-26 0:20 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: EMAIL_82365_linux-pm.zip --]
[-- Type: application/zip, Size: 4590 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-28 20:45 Heliogabalo Santos Jugon
0 siblings, 0 replies; 2775+ messages in thread
From: Heliogabalo Santos Jugon @ 2016-10-28 20:45 UTC (permalink / raw)
To: dri-devel
hi,
I'm a new programmer, i just was wondering if i can get some docs to
start learning DRI. I googled a lot but i didn't find a starter
documentation. Some refs will be apreciated
thx
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-31 12:51 Debra_Farmer/SSB/HIDOE-CJ/7EgCimzc+ygjh5cb8Nw
0 siblings, 0 replies; 2775+ messages in thread
From: Debra_Farmer/SSB/HIDOE-CJ/7EgCimzc+ygjh5cb8Nw @ 2016-10-31 12:51 UTC (permalink / raw)
I am Mrs. Gu Kailai and i intend to make a DONATION. Contact my personal E-mail Via: mrsgukailai-SgvXgqTD8kc@public.gmane.org for more details:
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-10-31 12:51 Debra_Farmer/SSB/HIDOE
0 siblings, 0 replies; 2775+ messages in thread
From: Debra_Farmer/SSB/HIDOE @ 2016-10-31 12:51 UTC (permalink / raw)
I am Mrs. Gu Kailai and i intend to make a DONATION. Contact my personal E-mail Via: mrsgukailai@post.cz for more details:
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-06 21:00 Dennis Dataopslag
0 siblings, 0 replies; 2775+ messages in thread
From: Dennis Dataopslag @ 2016-11-06 21:00 UTC (permalink / raw)
To: linux-raid
Help wanted very much!
My setup:
Thecus N5550 NAS with 5 1TB drives installed.
MD0: RAID 5 config of 4 drives (SD[ABCD]2)
MD10: RAID 1 config of all 5 drives (SD..1), system generated array
MD50: RAID 1 config of 4 drives (SD[ABCD]3), system generated array
1 drive (SDE) set as global hot spare.
What happened:
This weekend I thought it might be a good idea to do a SMART test for
the drives in my NAS.
I started the test on 1 drive and after it ran for a while I started
the other ones.
While the test was running drive 3 failed. I got a message the RAID
was degraded and started rebuilding. (My assumption is that at this
moment the global hot spare will automatically be added to the array)
I stopped the SMART tests of all drives at this moment since it seemed
logical to me the SMART test (or the outcomes) made the drive fail.
In stopping the tests, drive 1 also failed!!
I let it for a little but the admin interface kept telling me it was
degraded, did not seem to take any actions to start rebuilding.
At this point I started googling and found I should remove and reseat
the drives. This is also what I did but nothing seemd to happen.
The turned up as new drives in the admin interface and I re-added them
to the array, they were added as spares.
Even after adding them the array didn't start rebuilding.
I checked stat in mdadm and it told me clean FAILED opposed to the
degraded in the admin interface.
I rebooted the NAS since it didn't seem to be doing anything I might interrupt.
after rebooting it seemed as if the entire array had disappeared!!
I started looking for options in MDADM and tried every "normal"option
to rebuild the array (--assemble --scan for example)
Unfortunately I cannot produce a complete list since I cannot find how
to get it from the logging.
Finally I mdadm --create a new array with the original 4 drives with
all the right settings. (Got them from 1 of the original volumes)
The creation worked but after creation it doesn't seem to have a valid
partition table. This is the point where I realized I probably fucked
it up big-time and should call in the help squad!!!
What I think went wrong is that I re-created an array with the
original 4 drives from before the first failure but the hot-spare was
already added?
The most important data from the array is saved in an offline backup
luckily but I would very much like it if there is any way I could
restore the data from the array.
Is there any way I could get it back online?
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-14 21:31 5415306259-PhIK+mYhcR9sDcysRhXauQC/G2K4zDHf
0 siblings, 0 replies; 2775+ messages in thread
From: 5415306259-PhIK+mYhcR9sDcysRhXauQC/G2K4zDHf @ 2016-11-14 21:31 UTC (permalink / raw)
To: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
[-- Attachment #1: text_1479159022652.txt --]
[-- Type: text/plain, Size: 149 bytes --]
(Undeliverable: Who is this?) [http://products.office.com/en-us/CMSImages/Office365Logo_Orange.png?version=b8d100a9-0a8b-8e6a-88e1-ef488fee0470]
Your
[-- Attachment #2: Type: text/plain, Size: 421 bytes --]
This picture message or video message was sent using Multimedia Messaging Service.
To play video messages sent to email, Apple QuickTime 6.5 or higher is required. Visit www.apple.com/quicktime/download to download the free player or upgrade your existing QuickTime Player. Note: During the download process when asked to choose an installation type (Minimum, Recommended or Custom), select Minimum for faster download.
[-- Attachment #3: Type: text/plain, Size: 205 bytes --]
_______________________________________________
Containers mailing list
Containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
https://lists.linuxfoundation.org/mailman/listinfo/containers
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2016-11-15 20:29 Christoph Lameter
0 siblings, 0 replies; 2775+ messages in thread
From: Christoph Lameter @ 2016-11-15 20:29 UTC (permalink / raw)
To: Peter Zijlstra
Cc: Daniel Vacek, Daniel Bristot de Oliveira, Tommaso Cucinotta, LKML,
linux-rt-users, Steven Rostedt, Ingo Molnar
> > There is a deadlock, Peter!!!
>
> Describe please? Also, have you tried disabling RT_RUNTIME_SHARE ?
>
The description was given earlier in the the thread and the drawbacks of
using RT_RUNTIME_SHARE as well.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-20 22:16 Mr Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Friedrich Mayrhofer @ 2016-11-20 22:16 UTC (permalink / raw)
Good Day,
This is the second time i am sending you this mail.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-25 22:48 jacqueline.pike
0 siblings, 0 replies; 2775+ messages in thread
From: jacqueline.pike @ 2016-11-25 22:48 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: INFO_454369583_linux-arch.zip --]
[-- Type: application/zip, Size: 1890 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-26 17:47 gillian.murray
0 siblings, 0 replies; 2775+ messages in thread
From: gillian.murray @ 2016-11-26 17:47 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: INFO_087512886_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 1991 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-27 3:07 molino.petrone
0 siblings, 0 replies; 2775+ messages in thread
From: molino.petrone @ 2016-11-27 3:07 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: INFO_878208733419_linux-scsi.zip --]
[-- Type: application/zip, Size: 1873 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-27 7:04 obsexitos
0 siblings, 0 replies; 2775+ messages in thread
From: obsexitos @ 2016-11-27 7:04 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: INFO_006036_linux-ide.zip --]
[-- Type: application/zip, Size: 1883 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-27 14:25 beautyink
0 siblings, 0 replies; 2775+ messages in thread
From: beautyink @ 2016-11-27 14:25 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: MESSAGE_412161257221478_linux-ide.zip --]
[-- Type: application/zip, Size: 3511 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-27 16:53 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2016-11-27 16:53 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: MESSAGE_893031982_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 3854 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-28 9:58 Mr Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Friedrich Mayrhofer @ 2016-11-28 9:58 UTC (permalink / raw)
Good Day,
This is the second time i am sending you this mail.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me personally for
more details.
Regards.
Friedrich Mayrhofer
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-29 2:37 sophie.norman
0 siblings, 0 replies; 2775+ messages in thread
From: sophie.norman @ 2016-11-29 2:37 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: MESSAGE_779427631_netfilter-devel.zip --]
[-- Type: application/zip, Size: 2234 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-29 5:51 h.piontek
0 siblings, 0 replies; 2775+ messages in thread
From: h.piontek @ 2016-11-29 5:51 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: MESSAGE_428046_linux-acpi.zip --]
[-- Type: application/zip, Size: 2319 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-29 9:58 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2016-11-29 9:58 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: MESSAGE_88250465_linux-next.zip --]
[-- Type: application/zip, Size: 2313 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-29 10:12 carmen.croonquist
0 siblings, 0 replies; 2775+ messages in thread
From: carmen.croonquist @ 2016-11-29 10:12 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: MESSAGE_08773203777_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 2241 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-30 9:15 ajae
0 siblings, 0 replies; 2775+ messages in thread
From: ajae @ 2016-11-30 9:15 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: MESSAGE_949095530648352_linux-bcache.zip --]
[-- Type: application/zip, Size: 2577 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-11-30 20:44 jeffrey.faulkenberg
0 siblings, 0 replies; 2775+ messages in thread
From: jeffrey.faulkenberg @ 2016-11-30 20:44 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: MESSAGE_4570313393_linux-ext4.zip --]
[-- Type: application/zip, Size: 1458 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-03 10:16 zumbalisa
0 siblings, 0 replies; 2775+ messages in thread
From: zumbalisa @ 2016-12-03 10:16 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: MESSAGE_773317669156470_linux-pm.zip --]
[-- Type: application/zip, Size: 1456 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-03 17:18 lswedroe
0 siblings, 0 replies; 2775+ messages in thread
From: lswedroe @ 2016-12-03 17:18 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: MESSAGE_40_linux-acpi.zip --]
[-- Type: application/zip, Size: 1442 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-03 19:41 muirs
0 siblings, 0 replies; 2775+ messages in thread
From: muirs @ 2016-12-03 19:41 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: MESSAGE_818_linux-next.zip --]
[-- Type: application/zip, Size: 1432 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-03 20:56 kgbok.kezyhumh
0 siblings, 0 replies; 2775+ messages in thread
From: kgbok.kezyhumh @ 2016-12-03 20:56 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: MESSAGE_23793_linux-pm.zip --]
[-- Type: application/zip, Size: 1422 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-07 15:52 zumbalisa
0 siblings, 0 replies; 2775+ messages in thread
From: zumbalisa @ 2016-12-07 15:52 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: EMAIL_70757032509394_linux-pm.zip --]
[-- Type: application/zip, Size: 5681 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-08 14:58 edo.hlaca
0 siblings, 0 replies; 2775+ messages in thread
From: edo.hlaca @ 2016-12-08 14:58 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_1870015_netfilter-devel.zip --]
[-- Type: application/zip, Size: 4891 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-10 13:31 wwdkins-mEDtAoEtxfxHdm1AoWelKu1ftBKYq+Ku
0 siblings, 0 replies; 2775+ messages in thread
From: wwdkins-mEDtAoEtxfxHdm1AoWelKu1ftBKYq+Ku @ 2016-12-10 13:31 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_118257387_linux-api.zip --]
[-- Type: application/zip, Size: 6366 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-11 18:14 kholloway
0 siblings, 0 replies; 2775+ messages in thread
From: kholloway @ 2016-12-11 18:14 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_59604235363111_linux-bcache.zip --]
[-- Type: application/zip, Size: 3287 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-11 18:20 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2016-12-11 18:20 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: EMAIL_3090637_linux-next.zip --]
[-- Type: application/zip, Size: 3420 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-12 3:36 angers
0 siblings, 0 replies; 2775+ messages in thread
From: angers @ 2016-12-12 3:36 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_82854453_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 2956 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-13 23:26 wesley.sydnor
0 siblings, 0 replies; 2775+ messages in thread
From: wesley.sydnor @ 2016-12-13 23:26 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: MICROSOFT_50272042175_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 15477 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 2:45 Mr Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Friedrich Mayrhofer @ 2016-12-14 2:45 UTC (permalink / raw)
Good Day,
This is the second time i am sending you this mail.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 2:45 Mr Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Friedrich Mayrhofer @ 2016-12-14 2:45 UTC (permalink / raw)
Good Day,
This is the second time i am sending you this mail.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 3:54 Mr Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Friedrich Mayrhofer @ 2016-12-14 3:54 UTC (permalink / raw)
Good Day,
This is the second time i am sending you this mail.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 9:45 Mr Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Friedrich Mayrhofer @ 2016-12-14 9:45 UTC (permalink / raw)
Good Day,
This is the second time i am sending you this mail.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 9:45 Mr Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Friedrich Mayrhofer @ 2016-12-14 9:45 UTC (permalink / raw)
Good Day,
This is the second time i am sending you this mail.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 13:00 robert.berry
0 siblings, 0 replies; 2775+ messages in thread
From: robert.berry @ 2016-12-14 13:00 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: MICROSOFT_06124793158_linux-ide.zip --]
[-- Type: application/zip, Size: 16553 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 14:58 Joshua McBeth
0 siblings, 0 replies; 2775+ messages in thread
From: Joshua McBeth @ 2016-12-14 14:58 UTC (permalink / raw)
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA, Jason Gunthorpe
On Tue, Dec 13, 2016 at 2:01 PM, Jason Gunthorpe
<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org> wrote:
>
> On Tue, Dec 13, 2016 at 01:36:42PM -0500, Joshua McBeth wrote:
> > I bisected the kernel between v4.1 and v4.3.1 by booting each build on
> > the SR-IOV host and attempting to "ping x.x.x.x" with x.x.x.x being
> > the IP address assigned to the Infiniband interface of a remote host
> >
> > At 4be90bc's parent the SR-IOV host is able to ping the remote host,
> > but at 4be90bc the SR-IOV host is not able to ping the remote host
> > (destination host unreachable)
>
> Okay, that makes sense
>
> > The DMAR errors occur in both the kernel built at 4be90bc (not passing
> > ping test) and its parent (passing ping test)
>
> Continuing to bisect until you find the commit that introduces the
> DMAR errors would also be helpful, I think.
I will do this when I find some time and report back with the results.
>
>
>
> > Reverting only the commit 4be90bc from a later kernel (4.8.x) does not
> > enable the SR-IOV host to ping the remote host, which to me suggests
> > that another commit after 4be90bc is also causing my test to fail.
>
> Okay, that does not seem too surprising.
>
> Does this make your 4.8 kernel work? If yes, then I suspect mlx4 has
> broken IB_DEVICE_LOCAL_DMA_LKEY with SRIOV.. Leon? mlx5 has this
> broken, doesn't it?
>
With 4.8.1 and the below applied to the SR-IOV host and guest kernels,
SR-IOV functions in both the SR-IOV host and guests and there are no
DMAR errors emitted. The NFS/RDMA client in the guest does not work
on the SR-IOV virtual function with the NFS/RDMA server of the host on
the SR-IOV physical function, but this may be something else I need to
troubleshoot further, as both IPoIB and synthetic RDMA traffic passes
between the guest, host, and remote node just fine. The remote node's
NFS/RDMA client is additionally able to function with the host's
NFS/RDMA server on the SR-IOV physical function.
>
> It would also be very helpful to try and determine what memory the NIC is
> trying to read.. If it is the ipoib packet or some mlx4 internal
> thing.
How can I determine this?
> diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
> index 2be4ea0cda9c19..1346924d27691f 100644
> --- a/drivers/infiniband/core/verbs.c
> +++ b/drivers/infiniband/core/verbs.c
> @@ -243,6 +243,8 @@ struct ib_pd *__ib_alloc_pd(struct ib_device *device, unsigned int flags,
> atomic_set(&pd->usecnt, 0);
> pd->flags = flags;
>
> + device->attrs.device_cap_flags = 0;
> +
> if (device->attrs.device_cap_flags & IB_DEVICE_LOCAL_DMA_LKEY)
> pd->local_dma_lkey = device->local_dma_lkey;
> else
>
> Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-14 18:22 witt.kohl
0 siblings, 0 replies; 2775+ messages in thread
From: witt.kohl @ 2016-12-14 18:22 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: MICROSOFT_4388381_linux-crypto.zip --]
[-- Type: application/zip, Size: 3096 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <152583889.382342.1478184993559.ref@mail.yahoo.com>]
* (unknown),
@ 2016-12-16 10:46 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2016-12-16 10:46 UTC (permalink / raw)
внимания;
аши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2016
Почты технической поддержки ©2016
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-16 10:46 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2016-12-16 10:46 UTC (permalink / raw)
внимания;
аши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2016
Почты технической поддержки ©2016
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-18 0:32 linux-raid
0 siblings, 0 replies; 2775+ messages in thread
From: linux-raid @ 2016-12-18 0:32 UTC (permalink / raw)
To: linux-raid; +Cc: pxni, 8886670, gxizg, 95950137125, znnq, nmbf, 89550912
[-- Attachment #1: ORDER-816339228.zip --]
[-- Type: application/zip, Size: 16281 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-18 10:35 linux-crypto
0 siblings, 0 replies; 2775+ messages in thread
From: linux-crypto @ 2016-12-18 10:35 UTC (permalink / raw)
To: linux-crypto
Cc: pndy, 24405943805281, ewtge, 37894869, vcnx, izdb, 0992929564
[-- Attachment #1: BALLANCE-4318393604847.zip --]
[-- Type: application/zip, Size: 14527 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-18 15:49 linux-input
0 siblings, 0 replies; 2775+ messages in thread
From: linux-input @ 2016-12-18 15:49 UTC (permalink / raw)
To: linux-input; +Cc: yvux, 2882201, rninn, 558552496864273, qxqi, flwm, 685953
[-- Attachment #1: EBAY-121284446.zip --]
[-- Type: application/zip, Size: 5453 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-20 8:38 Jinpu Wang
0 siblings, 0 replies; 2775+ messages in thread
From: Jinpu Wang @ 2016-12-20 8:38 UTC (permalink / raw)
To: NeilBrown; +Cc: linux-raid, Shaohua Li, Nate Dailey
Hi Neil,
On Mon, Dec 19, 2016 at 11:45 PM, NeilBrown <neilb@suse.com> wrote:
> On Mon, Dec 19 2016, Jinpu Wang wrote:
>
>> Hi Neil,
>>
>> After apply the patch below, it paniced during boot in
>> generic_make_request-> bio_list_pop.
>> Looks related to you do bio_list_init(&bio_list_on_stack); again.
>>> diff --git a/block/blk-core.c b/block/blk-core.c
>>> index 14d7c0740dc0..3436b6fc3ef8 100644
>>> --- a/block/blk-core.c
>>> +++ b/block/blk-core.c
>>> @@ -2036,10 +2036,31 @@ blk_qc_t generic_make_request(struct bio *bio)
>>> struct request_queue *q = bdev_get_queue(bio->bi_bdev);
>>>
>>> if (likely(blk_queue_enter(q, false) == 0)) {
>>> + struct bio_list hold;
>>> + struct bio_list lower, same;
>>> +
>>> + /* Create a fresh bio_list for all subordinate requests */
>>> + bio_list_merge(&hold, &bio_list_on_stack);
>
> This is the problem. 'hold' hasn't been initialised.
> We could either do:
> bio_list_init(&hold);
> bio_list_merge(&hold, &bio_list_on_stack);
I did try first variant, it leads to panic in bio_check_pages_dirty
PID: 4004 TASK: ffff8802337f3400 CPU: 1 COMMAND: "fio"
#0 [ffff88023ec838d0] machine_kexec at ffffffff8104075a
#1 [ffff88023ec83918] crash_kexec at ffffffff810d54c3
#2 [ffff88023ec839e0] oops_end at ffffffff81008784
#3 [ffff88023ec83a08] no_context at ffffffff8104a8f6
#4 [ffff88023ec83a60] __bad_area_nosemaphore at ffffffff8104abcf
#5 [ffff88023ec83aa8] bad_area_nosemaphore at ffffffff8104ad3e
#6 [ffff88023ec83ab8] __do_page_fault at ffffffff8104afd7
#7 [ffff88023ec83b10] do_page_fault at ffffffff8104b33c
#8 [ffff88023ec83b20] page_fault at ffffffff818173a2
[exception RIP: bio_check_pages_dirty+65]
RIP: ffffffff813f6221 RSP: ffff88023ec83bd8 RFLAGS: 00010212
RAX: 0000000000000020 RBX: ffff880232d75010 RCX: 0000000000000001
RDX: ffff880232d74000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88023ec83bf8 R8: 0000000000000001 R9: 0000000000000000
R10: ffffffff81f25ac0 R11: ffff8802348acef0 R12: 0000000000000001
R13: 0000000000000000 R14: ffff8800b53b7d00 R15: ffff88009704d180
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#9 [ffff88023ec83c00] dio_bio_complete at ffffffff811d010e
#10 [ffff88023ec83c38] dio_bio_end_aio at ffffffff811d0367
#11 [ffff88023ec83c68] bio_endio at ffffffff813f637a
#12 [ffff88023ec83c80] call_bio_endio at ffffffffa0868220 [raid1]
#13 [ffff88023ec83cc8] raid_end_bio_io at ffffffffa086885b [raid1]
#14 [ffff88023ec83cf8] raid1_end_read_request at ffffffffa086a184 [raid1]
#15 [ffff88023ec83d50] bio_endio at ffffffff813f637a
#16 [ffff88023ec83d68] blk_update_request at ffffffff813fdab6
#17 [ffff88023ec83da8] blk_mq_end_request at ffffffff81406dfe
> or just
> hold = bio_list_on_stack;
>
>
> You didn't find 'hold' to be necessary in your testing, but I think that
> is more complex arrangements it could make an important difference.
Could you elaborate a bit more, from my understanding, in later
logic, we traverse the whole bio_list_on_stack,
and sort it into either lower or same bio_list, merge again the
initial bio_list_on_stack will lead to duplicated bio, isn't it?
>
> Thanks,
> NeilBrown
Thanks
Jinpu
>
>
>>> + bio_list_init(&bio_list_on_stack); ??? maybe init hold, and then merge bio_list_on_stack?
>>> ret = q->make_request_fn(q, bio);
>>>
>>> blk_queue_exit(q);
--
Jinpu Wang
Linux Kernel Developer
ProfitBricks GmbH
Greifswalder Str. 207
D - 10405 Berlin
Tel: +49 30 577 008 042
Fax: +49 30 577 008 299
Email: jinpu.wang@profitbricks.com
URL: https://www.profitbricks.de
Sitz der Gesellschaft: Berlin
Registergericht: Amtsgericht Charlottenburg, HRB 125506 B
Geschäftsführer: Achim Weiss
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2016-12-22 9:16 rhsinfo
0 siblings, 0 replies; 2775+ messages in thread
From: rhsinfo @ 2016-12-22 9:16 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: INFO_45088478_linux-bcache.zip --]
[-- Type: application/zip, Size: 7751 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-23 22:23 mpr.Microsoft
0 siblings, 0 replies; 2775+ messages in thread
From: mpr.Microsoft @ 2016-12-23 22:23 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 6413350296.zip --]
[-- Type: application/zip, Size: 33311 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-25 16:42 rlm85310
0 siblings, 0 replies; 2775+ messages in thread
From: rlm85310 @ 2016-12-25 16:42 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: ORDER-0278566654930.zip --]
[-- Type: application/zip, Size: 9362 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-26 10:49 zumbalisa
0 siblings, 0 replies; 2775+ messages in thread
From: zumbalisa @ 2016-12-26 10:49 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: BALLANCE-2255341.zip --]
[-- Type: application/zip, Size: 41880 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-28 6:56 kathleen.gilbert
0 siblings, 0 replies; 2775+ messages in thread
From: kathleen.gilbert @ 2016-12-28 6:56 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: $MONEY-51881793003.zip --]
[-- Type: application/zip, Size: 29295 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2016-12-29 22:55 beautyink
0 siblings, 0 replies; 2775+ messages in thread
From: beautyink @ 2016-12-29 22:55 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 02689684_linux-ide.zip --]
[-- Type: application/zip, Size: 41489 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-03 6:48 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-01-03 6:48 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-03 6:48 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-01-03 6:48 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-03 6:48 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-01-03 6:48 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-03 6:48 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-01-03 6:48 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-03 6:57 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-01-03 6:57 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-03 6:57 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-01-03 6:57 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: [PATCH v2 0/7] uapi: export all headers under uapi directories
@ 2017-01-09 11:33 Arnd Bergmann
2017-01-13 10:46 ` [PATCH v3 0/8] " Nicolas Dichtel
0 siblings, 1 reply; 2775+ messages in thread
From: Arnd Bergmann @ 2017-01-09 11:33 UTC (permalink / raw)
To: linuxppc-dev, linux-kbuild
Cc: linux-mips, alsa-devel, linux-ia64, linux-doc, airlied,
linux-fbdev, dri-devel, linux-mtd, sparclinux, linux-arch,
linux-s390, linux-am33-list, linux-c6x-dev, linux-rdma,
linux-hexagon, linux-sh, coreteam, fcoe-devel, xen-devel,
linux-snps-arc, linux-media, uclinux-h8-devel,
adi-buildroot-devel, linux-raid, linux-m68k, openrisc,
Nicolas Dichtel, linux-metag, linux-arm-kernel
On Friday, January 6, 2017 10:43:52 AM CET Nicolas Dichtel wrote:
> Here is the v2 of this series. The first 5 patches are just cleanup: some
> exported headers were still under a non-uapi directory.
Since this is meant as a cleanup, I commented on this to point out a cleaner
way to do the same.
> The patch 6 was spotted by code review: there is no in-tree user of this
> functionality.
> The last patch remove the use of header-y. Now all files under an uapi
> directory are exported.
Very nice!
> asm is a bit special, most of architectures export asm/<arch>/include/uapi/asm
> only, but there is two exceptions:
> - cris which exports arch/cris/include/uapi/arch-v[10|32];
This is interesting, though not your problem. Maybe someone who understands
cris better can comment on this: How is the decision made about which of
the arch/user.h headers gets used? I couldn't find that in the sources,
but it appears to be based on kernel compile-time settings, which is
wrong for user space header files that should be independent of the kernel
config.
> - tile which exports arch/tile/include/uapi/arch.
> Because I don't know if the output of 'make headers_install_all' can be changed,
> I introduce subdir-y in Kbuild file. The headers_install_all target copies all
> asm/<arch>/include/uapi/asm to usr/include/asm-<arch> but
> arch/cris/include/uapi/arch-v[10|32] and arch/tile/include/uapi/arch are not
> prefixed (they are put asis in usr/include/). If it's acceptable to modify the
> output of 'make headers_install_all' to export asm headers in
> usr/include/asm-<arch>/asm, then I could remove this new subdir-y and exports
> everything under arch/<arch>/include/uapi/.
I don't know if anyone still uses "make headers_install_all", I suspect
distros these days all use "make headers_install", so it probably
doesn't matter much.
In case of cris, it should be easy enough to move all the contents of the
uapi/arch-*/*.h headers into the respective uapi/asm/*.h headers, they
only seem to be referenced from there.
For tile, I suspect that would not work as the arch/*.h headers are
apparently defined as interfaces for both user space and kernel.
> Note also that exported files for asm are a mix of files listed by:
> - include/uapi/asm-generic/Kbuild.asm;
> - arch/x86/include/uapi/asm/Kbuild;
> - arch/x86/include/asm/Kbuild.
> This complicates a lot the processing (arch/x86/include/asm/Kbuild is also
> used by scripts/Makefile.asm-generic).
>
> This series has been tested with a 'make headers_install' on x86 and a
> 'make headers_install_all'. I've checked the result of both commands.
>
> This patch is built against linus tree. I don't know if it should be
> made against antoher tree.
The series should probably get merged through the kbuild tree, but testing
it on mainline is fine here.
Arnd
^ permalink raw reply [flat|nested] 2775+ messages in thread
* [PATCH v3 0/8] uapi: export all headers under uapi directories
2017-01-09 11:33 [PATCH v2 0/7] uapi: export all headers under uapi directories Arnd Bergmann
@ 2017-01-13 10:46 ` Nicolas Dichtel
2017-01-13 10:46 ` [PATCH v3 1/8] arm: put types.h in uapi Nicolas Dichtel
0 siblings, 1 reply; 2775+ messages in thread
From: Nicolas Dichtel @ 2017-01-13 10:46 UTC (permalink / raw)
To: arnd
Cc: linux-mips, alsa-devel, linux-ia64, linux-doc, airlied,
daniel.vetter, linux-fbdev, dri-devel, linux-mtd, sparclinux,
linux-arch, linux-s390, linux-am33-list, linux-c6x-dev,
linux-rdma, linux-hexagon, linux-sh, linux, hch, coreteam,
msalter, fcoe-devel, xen-devel, linux-snps-arc, linux-media,
uclinux-h8-devel, linux-xtensa, linux-kbuild, adi-buildroot-devel,
linux-raid, linux-m68k
Here is the v3 of this series. The first 5 patches are just cleanup: some
exported headers were still under a non-uapi directory or (x86 case) were
wrongly exported.
The patch 6 was spotted by code review: there is no in-tree user of this
functionality.
Patches 7 and 8 remove the need to list explicitly headers. Now all files
under an uapi directory are exported.
This series has been tested with a 'make headers_install' on x86 and a
'make headers_install_all'. I've checked the result of both commands.
This patch is built against linus tree. If I must rebase it against the kbuild
tree, just tell me ;-)
v2 -> v3:
- patch #1: remove arch/arm/include/asm/types.h
- patch #2: remove arch/h8300/include/asm/bitsperlong.h
- patch #3: remove arch/nios2/include/uapi/asm/setup.h
- patch #4: don't export msr-index.h
- patch #5: fix a typo: s/unput-files3-name/input-files3-name
- patch #6: no change
- patch #7: fix include/uapi/asm-generic/Kbuild.asm by introducing mandatory-y
- add patch #8
v1 -> v2:
- add patch #1 to #6
- patch #7: remove use of header-y
Comments are welcomed,
Nicolas
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 2775+ messages in thread
* [PATCH v3 1/8] arm: put types.h in uapi
2017-01-13 10:46 ` [PATCH v3 0/8] " Nicolas Dichtel
@ 2017-01-13 10:46 ` Nicolas Dichtel
2017-01-13 15:36 ` (unknown) David Howells
0 siblings, 1 reply; 2775+ messages in thread
From: Nicolas Dichtel @ 2017-01-13 10:46 UTC (permalink / raw)
To: arnd
Cc: mmarek, linux-kbuild, linux-doc, linux-kernel, linux-alpha,
linux-snps-arc, linux-arm-kernel, adi-buildroot-devel,
linux-c6x-dev, linux-cris-kernel, uclinux-h8-devel, linux-hexagon,
linux-ia64, linux-m68k, linux-metag, linux-mips, linux-am33-list,
nios2-dev, openrisc, linux-parisc, linuxppc-dev, linux-s390,
linux-sh, sparclinux, linux-xtensa, linux-arch
This header file is exported, thus move it to uapi.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---
arch/arm/include/asm/types.h | 40 ---------------------------------------
arch/arm/include/uapi/asm/types.h | 40 +++++++++++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+), 40 deletions(-)
delete mode 100644 arch/arm/include/asm/types.h
create mode 100644 arch/arm/include/uapi/asm/types.h
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
deleted file mode 100644
index a53cdb8f068c..000000000000
--- a/arch/arm/include/asm/types.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _ASM_TYPES_H
-#define _ASM_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-/*
- * The C99 types uintXX_t that are usually defined in 'stdint.h' are not as
- * unambiguous on ARM as you would expect. For the types below, there is a
- * difference on ARM between GCC built for bare metal ARM, GCC built for glibc
- * and the kernel itself, which results in build errors if you try to build with
- * -ffreestanding and include 'stdint.h' (such as when you include 'arm_neon.h'
- * in order to use NEON intrinsics)
- *
- * As the typedefs for these types in 'stdint.h' are based on builtin defines
- * supplied by GCC, we can tweak these to align with the kernel's idea of those
- * types, so 'linux/types.h' and 'stdint.h' can be safely included from the same
- * source file (provided that -ffreestanding is used).
- *
- * int32_t uint32_t uintptr_t
- * bare metal GCC long unsigned long unsigned int
- * glibc GCC int unsigned int unsigned int
- * kernel int unsigned int unsigned long
- */
-
-#ifdef __INT32_TYPE__
-#undef __INT32_TYPE__
-#define __INT32_TYPE__ int
-#endif
-
-#ifdef __UINT32_TYPE__
-#undef __UINT32_TYPE__
-#define __UINT32_TYPE__ unsigned int
-#endif
-
-#ifdef __UINTPTR_TYPE__
-#undef __UINTPTR_TYPE__
-#define __UINTPTR_TYPE__ unsigned long
-#endif
-
-#endif /* _ASM_TYPES_H */
diff --git a/arch/arm/include/uapi/asm/types.h b/arch/arm/include/uapi/asm/types.h
new file mode 100644
index 000000000000..9435a42f575e
--- /dev/null
+++ b/arch/arm/include/uapi/asm/types.h
@@ -0,0 +1,40 @@
+#ifndef _UAPI_ASM_TYPES_H
+#define _UAPI_ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+/*
+ * The C99 types uintXX_t that are usually defined in 'stdint.h' are not as
+ * unambiguous on ARM as you would expect. For the types below, there is a
+ * difference on ARM between GCC built for bare metal ARM, GCC built for glibc
+ * and the kernel itself, which results in build errors if you try to build with
+ * -ffreestanding and include 'stdint.h' (such as when you include 'arm_neon.h'
+ * in order to use NEON intrinsics)
+ *
+ * As the typedefs for these types in 'stdint.h' are based on builtin defines
+ * supplied by GCC, we can tweak these to align with the kernel's idea of those
+ * types, so 'linux/types.h' and 'stdint.h' can be safely included from the same
+ * source file (provided that -ffreestanding is used).
+ *
+ * int32_t uint32_t uintptr_t
+ * bare metal GCC long unsigned long unsigned int
+ * glibc GCC int unsigned int unsigned int
+ * kernel int unsigned int unsigned long
+ */
+
+#ifdef __INT32_TYPE__
+#undef __INT32_TYPE__
+#define __INT32_TYPE__ int
+#endif
+
+#ifdef __UINT32_TYPE__
+#undef __UINT32_TYPE__
+#define __UINT32_TYPE__ unsigned int
+#endif
+
+#ifdef __UINTPTR_TYPE__
+#undef __UINTPTR_TYPE__
+#define __UINTPTR_TYPE__ unsigned long
+#endif
+
+#endif /* _UAPI_ASM_TYPES_H */
--
2.8.1
^ permalink raw reply related [flat|nested] 2775+ messages in thread
* (unknown)
2017-01-13 10:46 ` [PATCH v3 1/8] arm: put types.h in uapi Nicolas Dichtel
@ 2017-01-13 15:36 ` David Howells
0 siblings, 0 replies; 2775+ messages in thread
From: David Howells @ 2017-01-13 15:36 UTC (permalink / raw)
To: Nicolas Dichtel
Cc: dhowells, arnd, linux-mips, linux-m68k, linux-ia64, linux-doc,
alsa-devel, dri-devel, linux-mtd, sparclinux, linux-arch,
linux-s390, linux-am33-list, linux-c6x-dev, linux-rdma,
linux-hexagon, linux-sh, linux, coreteam, fcoe-devel, xen-devel,
linux-snps-arc, linux-media, uclinux-h8-devel, linux-xtensa,
linux-kbuild, adi-buildroot-devel
Nicolas Dichtel <nicolas.dichtel@6wind.com> wrote:
> This header file is exported, thus move it to uapi.
Exported how?
> +#ifdef __INT32_TYPE__
> +#undef __INT32_TYPE__
> +#define __INT32_TYPE__ int
> +#endif
> +
> +#ifdef __UINT32_TYPE__
> +#undef __UINT32_TYPE__
> +#define __UINT32_TYPE__ unsigned int
> +#endif
> +
> +#ifdef __UINTPTR_TYPE__
> +#undef __UINTPTR_TYPE__
> +#define __UINTPTR_TYPE__ unsigned long
> +#endif
These weren't defined by the kernel before, so why do we need to define them
now?
Will defining __UINTPTR_TYPE__ cause problems in compiling libboost by
changing the signature on C++ functions that use uintptr_t?
David
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-01-13 15:36 ` David Howells
0 siblings, 0 replies; 2775+ messages in thread
From: David Howells @ 2017-01-13 15:36 UTC (permalink / raw)
To: Nicolas Dichtel
Cc: dhowells, arnd, linux-mips, linux-m68k, linux-ia64, linux-doc,
alsa-devel, dri-devel, linux-mtd, sparclinux, linux-arch,
linux-s390, linux-am33-list, linux-c6x-dev, linux-rdma,
linux-hexagon, linux-sh, linux, coreteam, fcoe-devel, xen-devel,
linux-snps-arc, linux-media, uclinux-h8-devel, linux-xtensa,
linux-kbuild, adi-buildroot-devel, linux-
Nicolas Dichtel <nicolas.dichtel@6wind.com> wrote:
> This header file is exported, thus move it to uapi.
Exported how?
> +#ifdef __INT32_TYPE__
> +#undef __INT32_TYPE__
> +#define __INT32_TYPE__ int
> +#endif
> +
> +#ifdef __UINT32_TYPE__
> +#undef __UINT32_TYPE__
> +#define __UINT32_TYPE__ unsigned int
> +#endif
> +
> +#ifdef __UINTPTR_TYPE__
> +#undef __UINTPTR_TYPE__
> +#define __UINTPTR_TYPE__ unsigned long
> +#endif
These weren't defined by the kernel before, so why do we need to define them
now?
Will defining __UINTPTR_TYPE__ cause problems in compiling libboost by
changing the signature on C++ functions that use uintptr_t?
David
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-09 12:18 anthonia
0 siblings, 0 replies; 2775+ messages in thread
From: anthonia @ 2017-01-09 12:18 UTC (permalink / raw)
Bitte tut mir leid, dass ich Sie stören kann, können Sie mich auf
E-Mail-Adresse, so dass ich in der Lage, Ihnen meine Bilder
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-11 2:43 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-01-11 2:43 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 998944767346.zip --]
[-- Type: application/zip, Size: 49782 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-11 12:54 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-01-11 12:54 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 286560328358.zip --]
[-- Type: application/zip, Size: 36986 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-13 7:50 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-01-13 7:50 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 336887.zip --]
[-- Type: application/zip, Size: 44977 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-13 11:28 service
0 siblings, 0 replies; 2775+ messages in thread
From: service @ 2017-01-13 11:28 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: INFO_4883709289_linux-crypto.zip --]
[-- Type: application/zip, Size: 45688 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-01-15 19:56 Sergey Polovko
0 siblings, 0 replies; 2775+ messages in thread
From: Sergey Polovko @ 2017-01-15 19:56 UTC (permalink / raw)
To: mtk.manpages-Re5JQEeQqe8AvxtiuMwx3w,
linux-man-u79uwXL29TY76Z2rM5mHXA
Hi,
It seems that unix(7) and recv(2) man pages have different information about using MSG_TRUNC flag with UNIX domain sockets.
Unix(7) man page says that this flag is not supported by UNIX domain sockets but actually it does. I wrote a simple program to
check usage of this flag. Recv(2) man pages says that it supports since linux 3.4. Unfortunately I have no such old kernel near me
but on 3.11, 3.13, 3.18 and 4.4 that I have this flag works with AF_UNIX sockets.
Could you please fix that?
Thanks,
Sergey Polovko
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-17 5:18 Andy Lutomirski
0 siblings, 0 replies; 2775+ messages in thread
From: Andy Lutomirski @ 2017-01-17 5:18 UTC (permalink / raw)
To: Tejun Heo
Cc: Michal Hocko, Peter Zijlstra, David Ahern, Alexei Starovoitov,
Andy Lutomirski, Daniel Mack, Mickaël Salaün, Kees Cook,
Jann Horn, David S. Miller, Thomas Graf, Michael Kerrisk,
Linux API, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Network Development
;; This buffer is for text that is not saved, and for Lisp evaluation.
;; To create a file, visit it with C-x C-f and enter text in its buffer.
On Sun, Jan 15, 2017 at 5:19 PM, Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> Hello,
>
> Sorry about the delay. Some fire fighthing followed the holidays.
>
> On Tue, Jan 03, 2017 at 11:25:59AM +0100, Michal Hocko wrote:
>> > So from what I understand the proposed cgroup is not in fact
>> > hierarchical at all.
>> >
>> > @TJ, I thought you were enforcing all new cgroups to be properly
>> > hierarchical, that would very much include this one.
>>
>> I would be interested in that as well. We have made that mistake in
>> memcg v1 where hierarchy could be disabled for performance reasons and
>> that turned out to be major PITA in the end. Why do we want to repeat
>> the same mistake here?
>
> Across the different threads on this subject, there have been multiple
> explanations but I'll try to sum it up more clearly.
>
> The big issue here is whether this is a cgroup thing or a bpf thing.
> I don't think there's anything inherently wrong with one approach or
> the other. Forget about the proposed cgroup bpf extentions but thinkg
> about how iptables does cgroups. Whether it's the netcls/netprio in
> v1 or direct membership matching in v2, it is the network side testing
> for cgroup membership one way or the other. The only part where
> cgroup is involved in is answering that test.
>
[...]
>
> None of the issues that people have been raising here is actually an
> issue if one thinks of it as a part of bpf. Its security model is
> exactly the same as any other bpf programs. Recursive behavior is
> exactly the same as how other external cgroup descendant membership
> testing work. There is no issue here whatsoever.
After sleeping on this, here are my thoughts:
First, there are three ways to think about this, not just two. It
could be a BPF feature, a net feature, or a cgroup feature.
I think that calling it a BPF feature is a cop-out. BPF is an
assembly language and a mechanism for importing little programs into
the kernel. BPF maps are a BPF feature. These new hooks are a
feature that actively changes the behavior of other parts of the
kernel. I don't see how calling this new feature a "BPF" feature
excuses it from playing by the expected rules of the subsystems it
affects or from generally working well with the rest of the kernel.
Perhaps this is a net feature, though, not a cgroup feature. This
would IMO make a certain amount of sense. Iptables cgroup matches,
for example, logically are an iptables (i.e., net) feature. The
problem here is that network configuration (and this explicitly
includes iptables) is done on a per-netns level, whereas these new
hooks entirely ignore network namespaces. I've pointed out that
trying to enable them in a namespaced world is problematic (e.g.
switching to ns_capable() will cause serious problems), and Alexei
seems to think that this will never happen. So I don't think we can
really call this a net feature that works the way that other net
features work.
(Suppose that this actually tried to be netns-enabled. Then you'd
have to map from (netns, cgroup) -> hook, and this would probably be
slow and messy.)
So I think that leaves it being a cgroup feature. And it definitely
does *not* play by the rules of cgroups right now.
> I'm sure we'll
> eventually get there but from what I hear it isn't something we can
> pull off in a restricted timeframe.
To me, this sounds like "the API isn't that great, we know how to do
better, but we really really want this feature ASAP so we want to ship
it with a sub-par API." I think that's a bad idea.
> This also holds true for the perf controller. While it is implemented
> as a controller, it isn't visible to cgroup users in any way and the
> only function it serves is providing the membership test to perf
> subsystem. perf is the one which decides whether and how it is to be
> used. cgroup providing membership test to other subsystems is
> completely acceptable and established.
Unless I'm mistaken, "perf_event" is an actual cgroup controller, and
it explicitly respects the cgroup hierarchy. It shows up in
/proc/cgroups, and I had no problem mounting a cgroupfs instance with
perf_event enabled. So I'm not sure what you mean.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-19 4:56 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-01-19 4:56 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: EMAIL_3355679483685_linux-crypto.zip --]
[-- Type: application/zip, Size: 2650 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-19 12:35 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-01-19 12:35 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_937476267145_linux-ext4.zip --]
[-- Type: application/zip, Size: 2795 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-20 5:18 x1kn8fk
0 siblings, 0 replies; 2775+ messages in thread
From: x1kn8fk @ 2017-01-20 5:18 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_187760_netfilter-devel.zip --]
[-- Type: application/zip, Size: 45491 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-20 8:12 sorbisches.internat
0 siblings, 0 replies; 2775+ messages in thread
From: sorbisches.internat @ 2017-01-20 8:12 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_6816494_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 52375 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-21 6:51 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-01-21 6:51 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_53574576_linux-ext4.zip --]
[-- Type: application/zip, Size: 3389 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-21 9:48 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-01-21 9:48 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: EMAIL_06644_linux-m68k.zip --]
[-- Type: application/zip, Size: 2992 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-21 17:47 amit mahadik
0 siblings, 0 replies; 2775+ messages in thread
From: amit mahadik @ 2017-01-21 17:47 UTC (permalink / raw)
To: linux-mmc
[-- Attachment #1: Type: text/plain, Size: 719 bytes --]
Hello,
I am using ARM (CortexA9)development board which has SPI
controller running at 5MHz. I want to interface MMC card on SPI bus. I
have made changes to my board.c file to include the mmc_spi driver and
mentioned the Chip select, mode (MODE 0) and frequency of operation
(started with 40kHz tried with 25MHz as well). The initial card
detection goes well. However, there are CRC errors when the block
layer tries to read the partition table. This issue is reproducible.
I have attached log for reference. The card gets detected on
Linux/Windows PC. The card is formatted with DOS partition (vfat
single partition).
Linux kernel version Used : 4.4.16
Please help me regarding this issue.
Regards,
Amit.
[-- Attachment #2: log.txt --]
[-- Type: text/plain, Size: 58403 bytes --]
# modprobe mmc_core
# modprobe mmc_block
# modprobe mmc_spi
[ 1218.212971] mmc0: SPI card removed
[ 1218.255628] mmc0: clock 0Hz busmode 2 powermode 0 cs 1 Vdd 0 width 0 timing 0
[ 1218.255651] mmc_spi spi1.1: mmc_spi: power off (0)
[ 1250.267741] mmc0: clock 0Hz busmode 2 powermode 1 cs 1 Vdd 23 width 0 timing 0
[ 1250.267766] mmc_spi spi1.1: mmc_spi: power up (23)
[ 1250.267779] mmc_spi spi1.1: Initial signal voltage of 3.3v
[ 1250.285035] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.285058] mmc_spi spi1.1: mmc_spi: power on (23)
[ 1250.285306] mmc_spi spi1.1: setup: unsupported mode bits 4
[ 1250.290797] mmc_spi spi1.1: can't change chip-select polarity
[ 1250.296728] mmc_spi spi1.1: mmc_spi: clock to 400000 Hz, 0
[ 1250.315041] mmc_spi spi1.1: SD/MMC host mmc0, no DMA, no WP, no poweroff
[ 1250.315078] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 1250.315091] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 1250.315109] mmc_spi spi1.1: mmc_spi: CMD52, resp R2/R5
[ 1250.315779] mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
[ 1250.315795] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 1250.315809] mmc_spi spi1.1: mmc_spi: CMD52, resp R2/R5
[ 1250.316443] mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000
[ 1250.316457] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.316471] mmc_spi spi1.1: mmc_spi: CMD0, resp R1
[ 1250.316586] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.317597] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 1250.317611] mmc_spi spi1.1: mmc_spi: CMD8, resp R3/R4/R7
[ 1250.317740] mmc0: req done (CMD8): 0: 00000001 000001aa 00000000 00000000
[ 1250.317754] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 1250.317767] mmc_spi spi1.1: mmc_spi: CMD5, resp R3/R4/R7
[ 1250.317890] mmc_spi spi1.1: ... CMD5 response SPI_R3/R4/R: resp 0005 ffffffff
[ 1250.317906] mmc0: req done (CMD5): -38: 00000005 ffffffff 00000000 00000000
[ 1250.317921] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.317934] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.318048] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.318062] mmc0: starting CMD41 arg 00000000 flags 000000e1
[ 1250.318075] mmc_spi spi1.1: mmc_spi: CMD41, resp R1
[ 1250.318189] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.318205] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.318218] mmc_spi spi1.1: mmc_spi: CMD0, resp R1
[ 1250.318329] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.319340] mmc0: starting CMD58 arg 00000000 flags 00000280
[ 1250.319353] mmc_spi spi1.1: mmc_spi: CMD58, resp R3/R4/R7
[ 1250.319482] mmc0: req done (CMD58): 0: 00000001 00ff8000 00000000 00000000
[ 1250.319496] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.319509] mmc_spi spi1.1: mmc_spi: CMD0, resp R1
[ 1250.319622] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.320633] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 1250.320646] mmc_spi spi1.1: mmc_spi: CMD8, resp R3/R4/R7
[ 1250.320774] mmc0: req done (CMD8): 0: 00000001 000001aa 00000000 00000000
[ 1250.320788] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.320801] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.320914] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.320928] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.320940] mmc_spi spi1.1: mmc_spi: CMD41, resp R1
[ 1250.321052] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.335043] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.335080] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.336624] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.336650] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.336672] mmc_spi spi1.1: mmc_spi: CMD41, resp R1
[ 1250.336799] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.355025] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.355049] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.355175] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.355195] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.355212] mmc_spi spi1.1: mmc_spi: CMD41, resp R1
[ 1250.355330] mmc0: req done (CMD41): 0: 00000000 00000000 00000000 00000000
[ 1250.355352] mmc0: starting CMD10 arg 00000000 flags 000000b5
[ 1250.355367] mmc0: blksz 16 blocks 1 flags 00000200 tsac 0 ms nsac 64
[ 1250.355384] mmc_spi spi1.1: mmc_spi: CMD10, resp R1
[ 1250.355469] mmc_spi spi1.1: mmc_spi: read block, 16 bytes
[ 1250.355672] mmc0: req done (CMD10): 0: 00000000 00000000 00000000 00000000
[ 1250.355686] mmc0: 16 bytes transferred: 0
[ 1250.355715] mmc0: starting CMD9 arg 00000000 flags 000000b5
[ 1250.355729] mmc0: blksz 16 blocks 1 flags 00000200 tsac 0 ms nsac 64
[ 1250.355746] mmc_spi spi1.1: mmc_spi: CMD9, resp R1
[ 1250.355830] mmc_spi spi1.1: mmc_spi: read block, 16 bytes
[ 1250.356029] mmc0: req done (CMD9): 0: 00000000 00000000 00000000 00000000
[ 1250.356042] mmc0: 16 bytes transferred: 0
[ 1250.356063] mmc0: starting CMD55 arg 00000000 flags 00000095
[ 1250.356081] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.356198] mmc0: req done (CMD55): 0: 00000000 00000000 00000000 00000000
[ 1250.356219] mmc0: starting CMD51 arg 00000000 flags 000000b5
[ 1250.356233] mmc0: blksz 8 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.356251] mmc_spi spi1.1: mmc_spi: CMD51, resp R1
[ 1250.356333] mmc_spi spi1.1: mmc_spi: read block, 8 bytes
[ 1250.356685] mmc0: req done (CMD51): 0: 00000000 00000000 00000000 00000000
[ 1250.356698] mmc0: 8 bytes transferred: 0
[ 1250.356720] mmc0: starting CMD55 arg 00000000 flags 00000095
[ 1250.356737] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.356854] mmc0: req done (CMD55): 0: 00000000 00000000 00000000 00000000
[ 1250.356873] mmc0: starting CMD13 arg 00000000 flags 000001b5
[ 1250.356887] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.356904] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.357024] mmc_spi spi1.1: mmc_spi: read block, 64 bytes
[ 1250.357571] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.357585] mmc0: 64 bytes transferred: 0
[ 1250.357607] mmc0: starting CMD6 arg 00fffff0 flags 000000b5
[ 1250.357622] mmc0: blksz 64 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.357639] mmc_spi spi1.1: mmc_spi: CMD6, resp R1
[ 1250.357721] mmc_spi spi1.1: mmc_spi: read block, 64 bytes
[ 1250.358341] mmc0: req done (CMD6): 0: 00000000 00000000 00000000 00000000
[ 1250.358355] mmc0: 64 bytes transferred: 0
[ 1250.358374] mmc0: starting CMD59 arg 00000001 flags 00000080
[ 1250.358392] mmc_spi spi1.1: mmc_spi: CMD59, resp R1
[ 1250.358509] mmc0: req done (CMD59): 0: 00000000 00000000 00000000 00000000
[ 1250.358525] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1250.366575] mmc0: clock 5000000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.366597] mmc_spi spi1.1: mmc_spi: clock to 5000000 Hz, 0
[ 1250.366627] mmc0: new SDHC card on SPI
[ 1250.371271] INDUS mmcblk0: mmc0:0000 SD 14.9 GiB
[ 1250.476901] mmc0: starting CMD18 arg 00000000 flags 000000b5
[ 1250.476923] mmc0: blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[ 1250.476937] mmc0: CMD12 arg 00000000 flags 00000095
[ 1250.476962] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.477060] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.482948] mmc_spi spi1.1: read - crc error: crc_val=0x2893, computed=0x6855 len=512
[ 1250.482964] mmc_spi spi1.1: read status -84
[ 1250.482978] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.483136] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.483220] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.488641] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.488659] mmc_spi spi1.1: read status -84
[ 1250.488674] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.488832] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.488917] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.494298] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.494312] mmc_spi spi1.1: read status -84
[ 1250.494326] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.494482] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.494567] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.499936] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.499953] mmc_spi spi1.1: read status -84
[ 1250.499968] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.500126] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.500211] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.505637] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.505654] mmc_spi spi1.1: read status -84
[ 1250.505668] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.505829] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.505914] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.511284] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.511299] mmc_spi spi1.1: read status -84
[ 1250.511313] mmc_spi spi1.1: mmc_spi: CMD12, resp R1
[ 1250.511435] mmc0: req done (CMD18): 0: 00000000 00000000 00000000 00000000
[ 1250.511449] mmc0: 0 bytes transferred: -84
[ 1250.511464] mmc0: (CMD12): 0: 00000000 00000000 00000000 00000000
[ 1250.511492] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.511509] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.511632] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.511652] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1250.520748] mmc0: clock 0Hz busmode 2 powermode 0 cs 1 Vdd 0 width 0 timing 0
[ 1250.520767] mmc_spi spi1.1: mmc_spi: power off (0)
[ 1250.522782] mmc0: clock 0Hz busmode 2 powermode 1 cs 1 Vdd 23 width 0 timing 0
[ 1250.522798] mmc_spi spi1.1: mmc_spi: power up (23)
[ 1250.522811] mmc_spi spi1.1: Initial signal voltage of 3.3v
[ 1250.535027] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.535049] mmc_spi spi1.1: mmc_spi: power on (23)
[ 1250.535283] mmc_spi spi1.1: setup: unsupported mode bits 4
[ 1250.540771] mmc_spi spi1.1: can't change chip-select polarity
[ 1250.546560] mmc_spi spi1.1: mmc_spi: clock to 400000 Hz, 0
[ 1250.565024] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 1250.565047] mmc_spi spi1.1: mmc_spi: CMD0, resp R1
[ 1250.565172] mmc0: req done (CMD0): 0: 00000001 00000000 00000000 00000000
[ 1250.566189] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 1250.566207] mmc_spi spi1.1: mmc_spi: CMD8, resp R3/R4/R7
[ 1250.566340] mmc0: req done (CMD8): 0: 00000001 000001aa 00000000 00000000
[ 1250.566360] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.566377] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.566495] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.566514] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.566530] mmc_spi spi1.1: mmc_spi: CMD41, resp R1
[ 1250.566647] mmc0: req done (CMD41): 0: 00000001 00000000 00000000 00000000
[ 1250.585029] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 1250.585054] mmc_spi spi1.1: mmc_spi: CMD55, resp R1
[ 1250.585179] mmc0: req done (CMD55): 0: 00000001 00000000 00000000 00000000
[ 1250.585198] mmc0: starting CMD41 arg 40000000 flags 000000e1
[ 1250.585216] mmc_spi spi1.1: mmc_spi: CMD41, resp R1
[ 1250.585336] mmc0: req done (CMD41): 0: 00000000 00000000 00000000 00000000
[ 1250.585358] mmc0: starting CMD10 arg 00000000 flags 000000b5
[ 1250.585373] mmc0: blksz 16 blocks 1 flags 00000200 tsac 0 ms nsac 64
[ 1250.585390] mmc_spi spi1.1: mmc_spi: CMD10, resp R1
[ 1250.585475] mmc_spi spi1.1: mmc_spi: read block, 16 bytes
[ 1250.585691] mmc0: req done (CMD10): 0: 00000000 00000000 00000000 00000000
[ 1250.585705] mmc0: 16 bytes transferred: 0
[ 1250.585727] mmc0: starting CMD59 arg 00000001 flags 00000080
[ 1250.585745] mmc_spi spi1.1: mmc_spi: CMD59, resp R1
[ 1250.585864] mmc0: req done (CMD59): 0: 00000000 00000000 00000000 00000000
[ 1250.585885] mmc0: clock 5000000Hz busmode 2 powermode 2 cs 1 Vdd 23 width 0 timing 0
[ 1250.585902] mmc_spi spi1.1: mmc_spi: clock to 5000000 Hz, 0
[ 1250.585916] mmc0: tried to reset card
[ 1250.589585] mmc0: starting CMD18 arg 00000000 flags 000000b5
[ 1250.589600] mmc0: blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[ 1250.589614] mmc0: CMD12 arg 00000000 flags 00000095
[ 1250.589631] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.589717] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.595141] mmc_spi spi1.1: read - crc error: crc_val=0x2817, computed=0x6855 len=512
[ 1250.595156] mmc_spi spi1.1: read status -84
[ 1250.595170] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.595328] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.595406] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.600786] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.600803] mmc_spi spi1.1: read status -84
[ 1250.600818] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.600977] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.601061] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.606475] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.606491] mmc_spi spi1.1: read status -84
[ 1250.606506] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.606668] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.606754] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.612077] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.612092] mmc_spi spi1.1: read status -84
[ 1250.612105] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.612262] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.612346] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.617699] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.617715] mmc_spi spi1.1: read status -84
[ 1250.617729] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.617887] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1250.617970] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.623330] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1250.623345] mmc_spi spi1.1: read status -84
[ 1250.623359] mmc_spi spi1.1: mmc_spi: CMD12, resp R1
[ 1250.623478] mmc0: req done (CMD18): 0: 00000000 00000000 00000000 00000000
[ 1250.623492] mmc0: 0 bytes transferred: -84
[ 1250.623507] mmc0: (CMD12): 0: 00000000 00000000 00000000 00000000
[ 1250.623527] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.623545] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.623666] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.623686] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1250.632773] mmcblk0: retrying using single block read
[ 1250.637863] mmc0: starting CMD17 arg 00000000 flags 000000b5
[ 1250.637880] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.637899] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.637988] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.643351] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.643366] mmc_spi spi1.1: read status -84
[ 1250.643380] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.643536] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.643619] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.648944] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.648962] mmc_spi spi1.1: read status -84
[ 1250.648976] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.649134] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.649218] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.654576] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.654591] mmc_spi spi1.1: read status -84
[ 1250.654604] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.654761] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.654844] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.660221] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.660237] mmc_spi spi1.1: read status -84
[ 1250.660252] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.660410] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.660494] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.665901] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.665919] mmc_spi spi1.1: read status -84
[ 1250.665933] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.666094] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.666178] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.671502] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1250.671517] mmc_spi spi1.1: read status -84
[ 1250.671538] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.671552] mmc0: 0 bytes transferred: -84
[ 1250.671573] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.671592] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.671715] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.671735] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1250.680820] blk_update_request: 6 callbacks suppressed
[ 1250.685993] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 1250.692014] mmc0: starting CMD17 arg 00000001 flags 000000b5
[ 1250.692029] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.692050] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.692138] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.697495] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.697512] mmc_spi spi1.1: read status -84
[ 1250.697526] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.697684] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.697768] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.703148] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.703162] mmc_spi spi1.1: read status -84
[ 1250.703175] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.703332] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.703415] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.708733] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.708750] mmc_spi spi1.1: read status -84
[ 1250.708764] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.708921] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.709004] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.714382] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.714396] mmc_spi spi1.1: read status -84
[ 1250.714410] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.714566] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.714649] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.719996] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.720012] mmc_spi spi1.1: read status -84
[ 1250.720026] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.720183] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.720268] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.725642] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1250.725658] mmc_spi spi1.1: read status -84
[ 1250.725680] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.725693] mmc0: 0 bytes transferred: -84
[ 1250.725714] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.725732] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.725856] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.725875] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x0, card status 0x0
[ 1250.734927] blk_update_request: I/O error, dev mmcblk0, sector 1
[ 1250.740975] mmc0: starting CMD17 arg 00000002 flags 000000b5
[ 1250.740994] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.741017] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.741107] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.746491] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.746507] mmc_spi spi1.1: read status -84
[ 1250.746521] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.746678] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.746761] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.752110] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.752124] mmc_spi spi1.1: read status -84
[ 1250.752138] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.752294] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.752377] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.757742] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.757758] mmc_spi spi1.1: read status -84
[ 1250.757772] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.757930] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.758015] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.763360] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.763374] mmc_spi spi1.1: read status -84
[ 1250.763388] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.763545] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.763628] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.768985] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.769002] mmc_spi spi1.1: read status -84
[ 1250.769017] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.769174] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.769256] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.774618] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1250.774632] mmc_spi spi1.1: read status -84
[ 1250.774654] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.774667] mmc0: 0 bytes transferred: -84
[ 1250.774687] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.774704] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.774826] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.774847] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x0, card status 0x0
[ 1250.783936] blk_update_request: I/O error, dev mmcblk0, sector 2
[ 1250.789976] mmc0: starting CMD17 arg 00000003 flags 000000b5
[ 1250.789992] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.790011] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.790101] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.795474] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.795491] mmc_spi spi1.1: read status -84
[ 1250.795505] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.795665] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.795748] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.801072] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.801086] mmc_spi spi1.1: read status -84
[ 1250.801100] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.801256] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.801339] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.806717] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.806734] mmc_spi spi1.1: read status -84
[ 1250.806748] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.806908] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.806991] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.812349] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.812363] mmc_spi spi1.1: read status -84
[ 1250.812376] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.812532] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.812613] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.817974] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.817991] mmc_spi spi1.1: read status -84
[ 1250.818005] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.818163] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.818246] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.823586] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1250.823600] mmc_spi spi1.1: read status -84
[ 1250.823622] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.823635] mmc0: 0 bytes transferred: -84
[ 1250.823655] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.823673] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.823795] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.823816] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x0, card status 0x0
[ 1250.832905] blk_update_request: I/O error, dev mmcblk0, sector 3
[ 1250.838945] mmc0: starting CMD17 arg 00000004 flags 000000b5
[ 1250.838962] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.838982] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.839071] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.844408] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.844423] mmc_spi spi1.1: read status -84
[ 1250.844437] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.844595] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.844678] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.850063] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.850080] mmc_spi spi1.1: read status -84
[ 1250.850094] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.850251] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.850334] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.855731] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.855747] mmc_spi spi1.1: read status -84
[ 1250.855761] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.855917] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.855999] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.861366] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.861380] mmc_spi spi1.1: read status -84
[ 1250.861394] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.861550] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.861631] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.866990] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.867005] mmc_spi spi1.1: read status -84
[ 1250.867019] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.867175] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.867258] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.872554] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1250.872568] mmc_spi spi1.1: read status -84
[ 1250.872589] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.872602] mmc0: 0 bytes transferred: -84
[ 1250.872623] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.872640] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.872760] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.872779] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x0, card status 0x0
[ 1250.881859] blk_update_request: I/O error, dev mmcblk0, sector 4
[ 1250.887900] mmc0: starting CMD17 arg 00000005 flags 000000b5
[ 1250.887917] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.887936] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.888026] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.893388] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.893403] mmc_spi spi1.1: read status -84
[ 1250.893417] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.893572] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.893655] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.899039] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.899055] mmc_spi spi1.1: read status -84
[ 1250.899070] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.899226] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.899310] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.904649] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.904664] mmc_spi spi1.1: read status -84
[ 1250.904678] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.904834] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.904915] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.910262] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.910279] mmc_spi spi1.1: read status -84
[ 1250.910293] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.910449] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.910532] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.915913] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.915930] mmc_spi spi1.1: read status -84
[ 1250.915945] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.916104] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.916189] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.921519] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1250.921534] mmc_spi spi1.1: read status -84
[ 1250.921556] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.921569] mmc0: 0 bytes transferred: -84
[ 1250.921591] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.921608] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.921729] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.921749] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x0, card status 0x0
[ 1250.930837] blk_update_request: I/O error, dev mmcblk0, sector 5
[ 1250.936874] mmc0: starting CMD17 arg 00000006 flags 000000b5
[ 1250.936890] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.936910] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.937000] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.942366] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.942381] mmc_spi spi1.1: read status -84
[ 1250.942395] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.942551] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.942634] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.947989] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.948005] mmc_spi spi1.1: read status -84
[ 1250.948019] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.948177] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.948260] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.953618] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.953633] mmc_spi spi1.1: read status -84
[ 1250.953646] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.953801] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.953883] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.959224] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.959241] mmc_spi spi1.1: read status -84
[ 1250.959255] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.959413] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.959496] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.964853] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.964867] mmc_spi spi1.1: read status -84
[ 1250.964880] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.965074] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.965163] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.970510] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1250.970526] mmc_spi spi1.1: read status -84
[ 1250.970548] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1250.970561] mmc0: 0 bytes transferred: -84
[ 1250.970582] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1250.970600] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1250.970720] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1250.970740] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x0, card status 0x0
[ 1250.979825] blk_update_request: I/O error, dev mmcblk0, sector 6
[ 1250.985862] mmc0: starting CMD17 arg 00000007 flags 000000b5
[ 1250.985877] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1250.985897] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.985986] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.991321] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1250.991335] mmc_spi spi1.1: read status -84
[ 1250.991349] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.991506] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.991588] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1250.997001] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1250.997018] mmc_spi spi1.1: read status -84
[ 1250.997033] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1250.997192] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1250.997276] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.002625] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.002641] mmc_spi spi1.1: read status -84
[ 1251.002654] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.002812] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.002896] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.008222] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.008240] mmc_spi spi1.1: read status -84
[ 1251.008254] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.008411] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.008496] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.013848] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.013862] mmc_spi spi1.1: read status -84
[ 1251.013875] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.014029] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.014111] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.019464] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.019480] mmc_spi spi1.1: read status -84
[ 1251.019503] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.019517] mmc0: 0 bytes transferred: -84
[ 1251.019538] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.019557] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.019679] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.019700] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x0, card status 0x0
[ 1251.028785] blk_update_request: I/O error, dev mmcblk0, sector 7
[ 1251.034804] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1251.042099] mmc0: starting CMD18 arg 00000000 flags 000000b5
[ 1251.042118] mmc0: blksz 512 blocks 8 flags 00000200 tsac 100 ms nsac 0
[ 1251.042132] mmc0: CMD12 arg 00000000 flags 00000095
[ 1251.042153] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1251.042245] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.047570] mmc_spi spi1.1: read - crc error: crc_val=0x2800, computed=0x6855 len=512
[ 1251.047588] mmc_spi spi1.1: read status -84
[ 1251.047602] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.047759] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1251.047843] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.053180] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.053194] mmc_spi spi1.1: read status -84
[ 1251.053208] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.053363] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1251.053447] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.058822] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.058839] mmc_spi spi1.1: read status -84
[ 1251.058853] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.059012] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1251.059095] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.064441] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.064455] mmc_spi spi1.1: read status -84
[ 1251.064469] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.064626] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1251.064709] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.070119] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.070136] mmc_spi spi1.1: read status -84
[ 1251.070150] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.070308] mmc_spi spi1.1: mmc_spi: CMD18, resp R1
[ 1251.070393] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.075752] mmc_spi spi1.1: read - crc error: crc_val=0x2828, computed=0x6855 len=512
[ 1251.075768] mmc_spi spi1.1: read status -84
[ 1251.075783] mmc_spi spi1.1: mmc_spi: CMD12, resp R1
[ 1251.075907] mmc0: req done (CMD18): 0: 00000000 00000000 00000000 00000000
[ 1251.075922] mmc0: 0 bytes transferred: -84
[ 1251.075936] mmc0: (CMD12): 0: 00000000 00000000 00000000 00000000
[ 1251.075964] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.075982] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.076105] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.076126] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1251.085211] mmcblk0: retrying using single block read
[ 1251.090271] mmc0: starting CMD17 arg 00000000 flags 000000b5
[ 1251.090287] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.090308] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.090399] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.095841] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.095858] mmc_spi spi1.1: read status -84
[ 1251.095873] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.096030] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.096114] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.101464] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.101478] mmc_spi spi1.1: read status -84
[ 1251.101492] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.101650] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.101733] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.107047] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.107063] mmc_spi spi1.1: read status -84
[ 1251.107077] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.107236] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.107320] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.112707] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.112721] mmc_spi spi1.1: read status -84
[ 1251.112734] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.112889] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.112972] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.118357] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.118373] mmc_spi spi1.1: read status -84
[ 1251.118387] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.118543] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.118626] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.123979] mmc_spi spi1.1: read - crc error: crc_val=0x2870, computed=0x6855 len=512
[ 1251.123994] mmc_spi spi1.1: read status -84
[ 1251.124015] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.124028] mmc0: 0 bytes transferred: -84
[ 1251.124049] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.124067] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.124188] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.124208] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x0, card status 0x0
[ 1251.133295] blk_update_request: I/O error, dev mmcblk0, sector 0
[ 1251.139333] mmc0: starting CMD17 arg 00000001 flags 000000b5
[ 1251.139349] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.139369] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.139460] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.144758] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.144773] mmc_spi spi1.1: read status -84
[ 1251.144787] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.144944] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.145060] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.150387] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.150403] mmc_spi spi1.1: read status -84
[ 1251.150418] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.150575] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.150658] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.156034] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.156050] mmc_spi spi1.1: read status -84
[ 1251.156064] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.156222] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.156305] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.161692] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.161706] mmc_spi spi1.1: read status -84
[ 1251.161720] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.161876] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.161959] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.167304] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.167321] mmc_spi spi1.1: read status -84
[ 1251.167335] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.167493] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.167576] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.172912] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xc18c len=512
[ 1251.172927] mmc_spi spi1.1: read status -84
[ 1251.172949] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.172963] mmc0: 0 bytes transferred: -84
[ 1251.172983] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.173001] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.173122] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.173143] mmcblk0: error -84 transferring data, sector 1, nr 7, cmd response 0x0, card status 0x0
[ 1251.182231] blk_update_request: I/O error, dev mmcblk0, sector 1
[ 1251.188280] mmc0: starting CMD17 arg 00000002 flags 000000b5
[ 1251.188297] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.188318] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.188406] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.193777] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.193791] mmc_spi spi1.1: read status -84
[ 1251.193805] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.193960] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.194043] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.199377] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.199394] mmc_spi spi1.1: read status -84
[ 1251.199409] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.199567] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.199649] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.205033] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.205050] mmc_spi spi1.1: read status -84
[ 1251.205064] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.205226] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.205311] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.210702] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.210718] mmc_spi spi1.1: read status -84
[ 1251.210731] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.210886] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.210968] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.216367] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.216383] mmc_spi spi1.1: read status -84
[ 1251.216397] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.216554] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.216637] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.221959] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xf9af len=512
[ 1251.221974] mmc_spi spi1.1: read status -84
[ 1251.221996] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.222009] mmc0: 0 bytes transferred: -84
[ 1251.222029] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.222047] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.222168] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.222188] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x0, card status 0x0
[ 1251.231278] mmc0: starting CMD17 arg 00000003 flags 000000b5
[ 1251.231296] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.231318] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.231410] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.236819] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.236836] mmc_spi spi1.1: read status -84
[ 1251.236850] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.237006] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.237089] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.242455] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.242470] mmc_spi spi1.1: read status -84
[ 1251.242483] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.242638] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.242720] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.248074] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.248091] mmc_spi spi1.1: read status -84
[ 1251.248105] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.248262] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.248344] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.253704] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.253718] mmc_spi spi1.1: read status -84
[ 1251.253732] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.253887] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.253970] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.259321] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.259337] mmc_spi spi1.1: read status -84
[ 1251.259351] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.259507] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.259590] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.264944] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x8589 len=512
[ 1251.264958] mmc_spi spi1.1: read status -84
[ 1251.265016] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.265034] mmc0: 0 bytes transferred: -84
[ 1251.265059] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.265078] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.265202] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.265223] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x0, card status 0x0
[ 1251.274281] mmc0: starting CMD17 arg 00000004 flags 000000b5
[ 1251.274297] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.274316] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.274402] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.279721] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.279738] mmc_spi spi1.1: read status -84
[ 1251.279752] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.279910] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.279993] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.285401] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.285417] mmc_spi spi1.1: read status -84
[ 1251.285431] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.285589] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.285672] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.291022] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.291036] mmc_spi spi1.1: read status -84
[ 1251.291050] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.291205] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.291286] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.296641] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.296657] mmc_spi spi1.1: read status -84
[ 1251.296670] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.296827] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.296911] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.302271] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.302286] mmc_spi spi1.1: read status -84
[ 1251.302300] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.302455] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.302537] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.307891] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x64e6 len=512
[ 1251.307907] mmc_spi spi1.1: read status -84
[ 1251.307929] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.307942] mmc0: 0 bytes transferred: -84
[ 1251.307963] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.307981] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.308104] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.308123] mmcblk0: error -84 transferring data, sector 4, nr 4, cmd response 0x0, card status 0x0
[ 1251.317214] mmc0: starting CMD17 arg 00000005 flags 000000b5
[ 1251.317233] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.317255] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.317346] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.322669] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.322685] mmc_spi spi1.1: read status -84
[ 1251.322699] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.322855] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.322937] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.328315] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.328331] mmc_spi spi1.1: read status -84
[ 1251.328344] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.328502] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.328585] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.333920] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.333934] mmc_spi spi1.1: read status -84
[ 1251.333948] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.334105] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.334187] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.339555] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.339572] mmc_spi spi1.1: read status -84
[ 1251.339586] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.339743] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.339827] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.345179] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.345194] mmc_spi spi1.1: read status -84
[ 1251.345212] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.345366] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.345452] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.350829] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0xb54b len=512
[ 1251.350844] mmc_spi spi1.1: read status -84
[ 1251.350866] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.350879] mmc0: 0 bytes transferred: -84
[ 1251.350899] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.350917] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.351039] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.351059] mmcblk0: error -84 transferring data, sector 5, nr 3, cmd response 0x0, card status 0x0
[ 1251.360157] mmc0: starting CMD17 arg 00000006 flags 000000b5
[ 1251.360175] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.360197] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.360286] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.365666] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.365682] mmc_spi spi1.1: read status -84
[ 1251.365696] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.365856] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.365940] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.371243] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.371258] mmc_spi spi1.1: read status -84
[ 1251.371273] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.371430] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.371512] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.376893] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.376910] mmc_spi spi1.1: read status -84
[ 1251.376924] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.377081] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.377165] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.382510] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.382525] mmc_spi spi1.1: read status -84
[ 1251.382539] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.382697] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.382780] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.388130] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.388146] mmc_spi spi1.1: read status -84
[ 1251.388160] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.388317] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.388401] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.393751] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x1ce0 len=512
[ 1251.393766] mmc_spi spi1.1: read status -84
[ 1251.393787] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.393800] mmc0: 0 bytes transferred: -84
[ 1251.393820] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.393837] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.393959] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.393980] mmcblk0: error -84 transferring data, sector 6, nr 2, cmd response 0x0, card status 0x0
[ 1251.403073] mmc0: starting CMD17 arg 00000007 flags 000000b5
[ 1251.403091] mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
[ 1251.403113] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.403206] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.408549] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.408565] mmc_spi spi1.1: read status -84
[ 1251.408580] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.408737] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.408820] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.414155] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.414170] mmc_spi spi1.1: read status -84
[ 1251.414183] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.414338] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.414421] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.419751] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.419769] mmc_spi spi1.1: read status -84
[ 1251.419783] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.419940] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.420023] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.425394] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.425410] mmc_spi spi1.1: read status -84
[ 1251.425424] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.425583] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.425667] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.430989] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.431003] mmc_spi spi1.1: read status -84
[ 1251.431017] mmc_spi spi1.1: mmc_spi: CMD12, resp R1B
[ 1251.431174] mmc_spi spi1.1: mmc_spi: CMD17, resp R1
[ 1251.431257] mmc_spi spi1.1: mmc_spi: read block, 512 bytes
[ 1251.436628] mmc_spi spi1.1: read - crc error: crc_val=0x0000, computed=0x4ce4 len=512
[ 1251.436644] mmc_spi spi1.1: read status -84
[ 1251.436667] mmc0: req done (CMD17): 0: 00000000 00000000 00000000 00000000
[ 1251.436680] mmc0: 0 bytes transferred: -84
[ 1251.436701] mmc0: starting CMD13 arg 00000000 flags 00000195
[ 1251.436719] mmc_spi spi1.1: mmc_spi: CMD13, resp R2/R5
[ 1251.436844] mmc0: req done (CMD13): 0: 00000000 00000000 00000000 00000000
[ 1251.436864] mmcblk0: error -84 transferring data, sector 7, nr 1, cmd response 0x0, card status 0x0
[ 1251.445962] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 1251.453134] mmcblk0: unable to read partition table
#
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-01-21 23:57 hp
0 siblings, 0 replies; 2775+ messages in thread
From: hp @ 2017-01-21 23:57 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_51532170_linux-raid.zip --]
[-- Type: application/zip, Size: 58041 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-22 20:22 bflove1-ntQ8I44N4zM
0 siblings, 0 replies; 2775+ messages in thread
From: bflove1-ntQ8I44N4zM @ 2017-01-22 20:22 UTC (permalink / raw)
To: linux-spi
[-- Attachment #1: EMAIL_30700_linux-spi.zip --]
[-- Type: application/zip, Size: 15020 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-22 20:23 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-01-22 20:23 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_310444915_linux-raid.zip --]
[-- Type: application/zip, Size: 15022 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-22 21:52 beautyink
0 siblings, 0 replies; 2775+ messages in thread
From: beautyink @ 2017-01-22 21:52 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_26831974_linux-ide.zip --]
[-- Type: application/zip, Size: 15974 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-23 0:35 sreuter
0 siblings, 0 replies; 2775+ messages in thread
From: sreuter @ 2017-01-23 0:35 UTC (permalink / raw)
To: kvm
[-- Attachment #1: EMAIL_0334264_kvm.zip --]
[-- Type: application/zip, Size: 16383 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-23 14:54 nhossein4212003
0 siblings, 0 replies; 2775+ messages in thread
From: nhossein4212003 @ 2017-01-23 14:54 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_17028_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 60028 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-25 8:24 bunny43200
0 siblings, 0 replies; 2775+ messages in thread
From: bunny43200 @ 2017-01-25 8:24 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: PRESIDENT-9742328762-linux-leds.zip --]
[-- Type: application/zip, Size: 2808 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-25 9:27 clasico082
0 siblings, 0 replies; 2775+ messages in thread
From: clasico082 @ 2017-01-25 9:27 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: BUY-526065316-linux-bcache.zip --]
[-- Type: application/zip, Size: 16822 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-25 14:50 a.skucha
0 siblings, 0 replies; 2775+ messages in thread
From: a.skucha @ 2017-01-25 14:50 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: BUY-59735-linux-scsi.zip --]
[-- Type: application/zip, Size: 53937 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-27 18:14 Gideon Israel Dsouza
0 siblings, 0 replies; 2775+ messages in thread
From: Gideon Israel Dsouza @ 2017-01-27 18:14 UTC (permalink / raw)
To: akpm, linux-kernel, gerg, geert, linux-m68k, paul.gortmaker
Folks,
I apologize for the goof ups. I know accepting newbie patches must be
annoying. If it's any consolation I'm trying hard to learn the ropes
with a simple patches so I can contribute more substantial stuff
later.
Thanks,
Gideon
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-30 23:36 paloma.depping
0 siblings, 0 replies; 2775+ messages in thread
From: paloma.depping @ 2017-01-30 23:36 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL-0964666885-linux-ext4.zip --]
[-- Type: application/zip, Size: 63862 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-01-31 7:58 Andy Gross
0 siblings, 0 replies; 2775+ messages in thread
From: Andy Gross @ 2017-01-31 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Cc: lorenzo.pieralisi, linux-arm-msm, will.deacon, linux-kernel,
Bjorn Andersson, Kevin Hilman, linux, ynorov, james.morse,
Olof Johansson, Andy Gross
Subject: [Patch v5 0/2] Support ARM SMCC SoC vendor quirks
At least one SoC vendor (Qualcomm) requires additional processing done
during ARM SMCCC calls. As such, an additional parameter to the
arm_smccc_smc is required to be able to handle SoC specific quirks.
The Qualcomm quirk is necessary due to the fact that the scm call can
be interrupted on Qualcomm ARM64 platforms. When this occurs, the
call must be restarted using information that was passed back during
the original smc call.
The first patch in this series adds a quirk structure and also adds a
quirk parameter to arm_smccc_smc calls. I added macros to allow users
to choose the API they need. This keeps all of the current users who
do not need quirks from having to change anything.
The second patch adds the Qualcomm quirk and also implements the
Qualcomm firmware changes required to handle the restarting of the
interrupted SMC call.
The original patch set for the SMCCC session ID is located at:
https://lkml.org/lkml/2016/8/20/7
Changes from v4:
- Fix issue with hvc calls.
Changes from v3:
- Fix documentation
Changes from v2:
- Use variadic macros
Changes from v1:
- Add macros to handle both use cases per review comments
Andy Gross (2):
arm: kernel: Add SMC structure parameter
firmware: qcom: scm: Fix interrupted SCM calls
arch/arm/kernel/armksyms.c | 2 +-
arch/arm/kernel/smccc-call.S | 7 ++++---
arch/arm64/kernel/arm64ksyms.c | 2 +-
arch/arm64/kernel/asm-offsets.c | 7 +++++--
arch/arm64/kernel/smccc-call.S | 22 ++++++++++++++++------
drivers/firmware/qcom_scm-64.c | 13 ++++++++++---
include/linux/arm-smccc.h | 38 +++++++++++++++++++++++++++++++-------
7 files changed, 68 insertions(+), 23 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-01 10:28 sophie.norman
0 siblings, 0 replies; 2775+ messages in thread
From: sophie.norman @ 2017-02-01 10:28 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: BILL-70972946354899-netfilter-devel.zip --]
[-- Type: application/zip, Size: 13251 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-01 11:16 board
0 siblings, 0 replies; 2775+ messages in thread
From: board @ 2017-02-01 11:16 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EBAY-599940970604973-linux-ext4.zip --]
[-- Type: application/zip, Size: 13752 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-07 8:12 Anders Lind
0 siblings, 0 replies; 2775+ messages in thread
From: Anders Lind @ 2017-02-07 8:12 UTC (permalink / raw)
To: linux ext4
greetings
http://speechelevated.com/spiderhunt.php?fill=2w3a9a9fgd2h
Anders
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-10 12:17 Tom St Denis
0 siblings, 0 replies; 2775+ messages in thread
From: Tom St Denis @ 2017-02-10 12:17 UTC (permalink / raw)
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
Fix bug where GPU_POWER wasn't accessible because we wrote
to *size early...
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-16 20:59 Qin's Yanjun
0 siblings, 0 replies; 2775+ messages in thread
From: Qin's Yanjun @ 2017-02-16 20:59 UTC (permalink / raw)
How are you today and your family? I'm Qin Yanjun, Tak-lam, SBS, JP, and
Chief Executive of (HKMA). I have a concealed business suggestion for you,
It require your attention and honest co-operation.
Regards,
Mr. Qin Yanjun
______________________________
Sky Silk, http://aknet.kz
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-16 21:01 Qin's Yanjun
0 siblings, 0 replies; 2775+ messages in thread
From: Qin's Yanjun @ 2017-02-16 21:01 UTC (permalink / raw)
How are you today and your family? I'm Qin Yanjun, Tak-lam, SBS, JP, and
Chief Executive of (HKMA). I have a concealed business suggestion for you,
It require your attention and honest co-operation.
Regards,
Mr. Qin Yanjun
______________________________
Sky Silk, http://aknet.kz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-21 4:09 eumann
0 siblings, 0 replies; 2775+ messages in thread
From: eumann @ 2017-02-21 4:09 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: EMAIL_905865433901950_linux-pm.zip --]
[-- Type: application/zip, Size: 8771 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-02-21 6:46 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-02-21 6:46 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 7729073.zip --]
[-- Type: application/zip, Size: 9016 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <1771828252.1867143.1486725329404.ref@mail.yahoo.com>]
* (unknown),
@ 2017-02-23 14:31 tao chang
0 siblings, 0 replies; 2775+ messages in thread
From: tao chang @ 2017-02-23 14:31 UTC (permalink / raw)
To: ceph-devel, ceph-users
HI,
I have a ceph cluster (ceph 10.2.5) witch 3 node, each has two osds.
It was a power outage last night and all the server are restarted
this morning again.
All osds are work well except the osd.0.
ID WEIGHT TYPE NAME UP/DOWN REWEIGHT PRIMARY-AFFINITY
-1 0.04500 root volumes
-2 0.01500 host zk25-02
0 0.01500 osd.0 down 0 1.00000
1 0.01500 osd.1 up 1.00000 1.00000
-3 0.01500 host zk25-03
2 0.01500 osd.2 up 1.00000 1.00000
3 0.01500 osd.3 up 1.00000 1.00000
-4 0.01500 host zk25-01
4 0.01500 osd.4 up 1.00000 1.00000
5 0.01500 osd.5 up 1.00000 1.00000
I tried to run it again with gdb, it turned it like this:
(gdb) bt
#0 0x00007ffff4cfd5f7 in raise () from /lib64/libc.so.6
#1 0x00007ffff4cfece8 in abort () from /lib64/libc.so.6
#2 0x00007ffff56019d5 in __gnu_cxx::__verbose_terminate_handler() ()
from /lib64/libstdc++.so.6
#3 0x00007ffff55ff946 in ?? () from /lib64/libstdc++.so.6
#4 0x00007ffff55ff973 in std::terminate() () from /lib64/libstdc++.so.6
#5 0x00007ffff55ffb93 in __cxa_throw () from /lib64/libstdc++.so.6
#6 0x0000555555b93b7f in pg_pool_t::decode (this=<optimized out>,
bl=...) at osd/osd_types.cc:1569
#7 0x0000555555f3a53f in decode (p=..., c=...) at osd/osd_types.h:1487
#8 decode<long, pg_pool_t> (m=Python Exception <type
'exceptions.IndexError'> list index out of range:
std::map with 1 elements, p=...) at include/encoding.h:648
#9 0x0000555555f2fa8d in OSDMap::decode_classic
(this=this@entry=0x55555fdf6480, p=...) at osd/OSDMap.cc:2026
#10 0x0000555555f2fe8c in OSDMap::decode
(this=this@entry=0x55555fdf6480, bl=...) at osd/OSDMap.cc:2116
#11 0x0000555555f3116e in OSDMap::decode (this=0x55555fdf6480, bl=...)
at osd/OSDMap.cc:1985
#12 0x00005555558e51fc in OSDService::try_get_map
(this=0x55555ff51860, epoch=76) at osd/OSD.cc:1340
#13 0x0000555555947ece in OSDService::get_map (this=<optimized out>,
e=<optimized out>, this=<optimized out>) at osd/OSD.h:884
#14 0x00005555558fb0f2 in OSD::init (this=0x55555ff50000) at osd/OSD.h:1917
#15 0x000055555585eea5 in main (argc=<optimized out>, argv=<optimized
out>) at ceph_osd.cc:605
it was caused by failed decoded of osdmap structure from osdmap
file(/var/lib/ceph/osd/ceph-0/current/meta/osdmap.76__0_64173F9C__none)
.
And by comparing the same file on osd.1, It make sure the osdmap file
has been corrupted.
Any one know how to fix it ? Thanks for advance !
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-02 14:44 Casperina Litaay
0 siblings, 0 replies; 2775+ messages in thread
From: Casperina Litaay @ 2017-03-02 14:44 UTC (permalink / raw)
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-02 15:55 nikita.gerasimov
0 siblings, 0 replies; 2775+ messages in thread
From: nikita.gerasimov @ 2017-03-02 15:55 UTC (permalink / raw)
To: ceph-devel
run-make-check.sh SUCCESS: http://paste.ubuntu.com/24096418/
WBR, Nikita.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-10 17:34 Tomi Maila
0 siblings, 0 replies; 2775+ messages in thread
From: Tomi Maila @ 2017-03-10 17:34 UTC (permalink / raw)
To: linux-rt-users
subscribe linux-rt-users
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-11 21:59 Karl Aichniger
0 siblings, 0 replies; 2775+ messages in thread
From: Karl Aichniger @ 2017-03-11 21:59 UTC (permalink / raw)
--
Hi, I appreciate your beauty! can we get to know each other better if you don't mind? My name is karl, Can you please tell me a little about yourself so that we can get to know each other better?
Best Regards
Karl.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-14 17:14 nkosuta-f+iqBESB6gc
0 siblings, 0 replies; 2775+ messages in thread
From: nkosuta-f+iqBESB6gc @ 2017-03-14 17:14 UTC (permalink / raw)
To: devicetree
[-- Attachment #1: EMAIL_05109557_devicetree.zip --]
[-- Type: application/zip, Size: 4727 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-14 21:58 indulge-HCInDj6vYHrk4FeknX8I/ZqQE7yCjDx5
0 siblings, 0 replies; 2775+ messages in thread
From: indulge-HCInDj6vYHrk4FeknX8I/ZqQE7yCjDx5 @ 2017-03-14 21:58 UTC (permalink / raw)
To: linux-cifs
[-- Attachment #1: EMAIL_1459387166_linux-cifs.zip --]
[-- Type: application/zip, Size: 4335 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-14 23:24 nhossein4212003
0 siblings, 0 replies; 2775+ messages in thread
From: nhossein4212003 @ 2017-03-14 23:24 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_84791057025623_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 4431 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-15 2:52 wesley.sydnor
0 siblings, 0 replies; 2775+ messages in thread
From: wesley.sydnor @ 2017-03-15 2:52 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_46656746_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 4573 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-15 3:26 befragung
0 siblings, 0 replies; 2775+ messages in thread
From: befragung @ 2017-03-15 3:26 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_61_linux-ext4.zip --]
[-- Type: application/zip, Size: 4892 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-15 3:58 beautyink
0 siblings, 0 replies; 2775+ messages in thread
From: beautyink @ 2017-03-15 3:58 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_2088089_linux-ide.zip --]
[-- Type: application/zip, Size: 4573 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-15 5:22 office
0 siblings, 0 replies; 2775+ messages in thread
From: office @ 2017-03-15 5:22 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: EMAIL_3306363114_linux-leds.zip --]
[-- Type: application/zip, Size: 4439 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-15 7:30 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-03-15 7:30 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_17586922488639_linux-arch.zip --]
[-- Type: application/zip, Size: 4091 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-20 0:26 Qing Chang
0 siblings, 0 replies; 2775+ messages in thread
From: Qing Chang @ 2017-03-20 0:26 UTC (permalink / raw)
To: linux fsdevel
hello Linux
http://www.skywalkers.gr/mmenuns4.php?largest=25gthun1ksmp5v5
Qing Chang
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-20 2:25 Rick Lee
0 siblings, 0 replies; 2775+ messages in thread
From: Rick Lee @ 2017-03-20 2:25 UTC (permalink / raw)
To: Michael Kerrisk-manpages; +Cc: linux-man-u79uwXL29TY76Z2rM5mHXA
Hi There.
I sent this message a few hours ago but was rejected by Carbon Copy
recipient because it was in HTML and not plain text format. So I'm
sending it again.
Ubuntu 16.04.2, Kernel 4.9.13, default installation command `yad`.
The word "Vaule" on line 578 should be replaced with "Value".
Thanks :)
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-20 19:40 janepatrick00-VmEwxm1hRrAnxqbYAscKCQ
0 siblings, 0 replies; 2775+ messages in thread
From: janepatrick00-VmEwxm1hRrAnxqbYAscKCQ @ 2017-03-20 19:40 UTC (permalink / raw)
To: Recipients
Hello,
My name is Jane from UK, I came across you email address online, I will like to know more about you , I have a very important reason of contacting you which, I'll tell you in my next mail.
I wait for your reply
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-20 19:40 janepatrick00-VmEwxm1hRrAnxqbYAscKCQ
0 siblings, 0 replies; 2775+ messages in thread
From: janepatrick00-VmEwxm1hRrAnxqbYAscKCQ @ 2017-03-20 19:40 UTC (permalink / raw)
To: Recipients
Hello,
My name is Jane from UK, I came across you email address online, I will like to know more about you , I have a very important reason of contacting you which, I'll tell you in my next mail.
I wait for your reply
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-03-21 6:58 Piotr Sroka
0 siblings, 0 replies; 2775+ messages in thread
From: Piotr Sroka @ 2017-03-21 6:58 UTC (permalink / raw)
To: Masahiro Yamada
Cc: linux-mmc, Adrian Hunter, Ulf Hansson, Linux Kernel Mailing List,
Piotr
Subject: RE: [v4 3/3] mmc: sdhci-cadence: Update PHY delay configuration
In-reply-to: <CAK7LNARTMF2F1_3QWqF87qV6FzeYHguWbRC5DEDnvYV1M-=9TQ@mail.gmail.com>
References: <1490008372-16372-1-git-send-email-piotrs@cadence.com> <1490008855-27135-1-git-send-email-piotrs@cadence.com> <CAK7LNARTMF2F1_3QWqF87qV6FzeYHguWbRC5DEDnvYV1M-=9TQ@mail.gmail.com>
Hi Masahiro
2017-03-21 02:46 AM Masahiro Yamada <yamada.masahiro@socionext.com>:
> Hi Piotr,
>
>
> 2017-03-20 20:20 GMT+09:00 Piotr Sroka <piotrs@cadence.com>:
> > DTS properties are used instead of fixed data
> > because PHY settings can be different for different chips/boards.
> >
> > Signed-off-by: Piotr Sroka <piotrs@cadence.com>
>
>
> I found this version is a problem for me.
>
>
> > +
> > +static const struct sdhci_cdns_phy_cfg sdhci_cdns_phy_cfgs[] = {
> > + { "cdns,phy-input-delay-sd-highspeed", SDHCI_CDNS_PHY_DLY_SD_HS, },
> > + { "cdns,phy-input-delay-sd-legacy", SDHCI_CDNS_PHY_DLY_SD_DEFAULT, },
> > + { "cdns,phy-input-delay-sd-uhs-sdr12", SDHCI_CDNS_PHY_DLY_UHS_SDR12, },
> > + { "cdns,phy-input-delay-sd-uhs-sdr25", SDHCI_CDNS_PHY_DLY_UHS_SDR25, },
> > + { "cdns,phy-input-delay-sd-uhs-sdr50", SDHCI_CDNS_PHY_DLY_UHS_SDR50, },
> > + { "cdns,phy-input-delay-sd-uhs-ddr50", SDHCI_CDNS_PHY_DLY_UHS_DDR50, },
> > + { "cdns,phy-input-delay-mmc-highspeed", SDHCI_CDNS_PHY_DLY_EMMC_SDR, },
> > + { "cdns,phy-input-delay-mmc-ddr", SDHCI_CDNS_PHY_DLY_EMMC_DDR, },
> > + { "cdns,phy-dll-delay-sdclk", SDHCI_CDNS_PHY_DLY_SDCLK, },
> > + { "cdns,phy-dll-delay-sdclk-hsmmc", SDHCI_CDNS_PHY_DLY_HSMMC, },
> > + { "cdns,phy-dll-delay-strobe", SDHCI_CDNS_PHY_DLY_STROBE, },
> > +};
> > +
>
>
> I see mmc-legacy property in v1,
> but it is missing now.
>
>
> > static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_priv *priv,
> > u8 addr, u8 data)
> > {
> > @@ -90,13 +113,26 @@ static int sdhci_cdns_write_phy_reg(struct sdhci_cdns_priv *priv,
> > return 0;
> > }
> >
> > -static void sdhci_cdns_phy_init(struct sdhci_cdns_priv *priv)
> > +static int sdhci_cdns_phy_init(struct device_node *np,
> > + struct sdhci_cdns_priv *priv)
> > {
> > - sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_HS, 4);
> > - sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_SD_DEFAULT, 4);
> > - sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_LEGACY, 9);
> > - sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_SDR, 2);
> > - sdhci_cdns_write_phy_reg(priv, SDHCI_CDNS_PHY_DLY_EMMC_DDR, 3);
>
>
> I need to set SDHCI_CDNS_PHY_DLY_EMMC_LEGACY to 9 for my SoC.
>
> Maybe, do we need a DT property for this, too?
>
I can add it but could you check if you realy need it? There is no selection MMC legacy mode
in this driver.
Best Regards
Piotr Sroka
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-03-23 17:07 Ning Yao
0 siblings, 0 replies; 2775+ messages in thread
From: Ning Yao @ 2017-03-23 17:07 UTC (permalink / raw)
To: ceph-devel
Hi, all
Why run-rbd-tests now is not involved into "make check" to verify the
rbd cli now? So how could we test rbd cli now?
Regards
Ning Yao
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-28 21:11 George Papadrosou
0 siblings, 0 replies; 2775+ messages in thread
From: George Papadrosou @ 2017-03-28 21:11 UTC (permalink / raw)
To: Ceph Development
subscribe+digest
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-03-30 10:55 Sandeepa Prabhu
0 siblings, 0 replies; 2775+ messages in thread
From: Sandeepa Prabhu @ 2017-03-30 10:55 UTC (permalink / raw)
To: kvmarm
[-- Attachment #1.1: Type: text/plain, Size: 18 bytes --]
subscribe kvm-arm
[-- Attachment #1.2: Type: text/html, Size: 112 bytes --]
[-- Attachment #2: Type: text/plain, Size: 151 bytes --]
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-03 6:14 Adrian Gillian Bayford
0 siblings, 0 replies; 2775+ messages in thread
From: Adrian Gillian Bayford @ 2017-04-03 6:14 UTC (permalink / raw)
To: Recipients
£1.5 Million Has Been Granted To You As A Donation Visit www.bbc.co.uk/news/uk-england-19254228 Sendname Address Phone for more info
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-03 6:14 Adrian Gillian Bayford
0 siblings, 0 replies; 2775+ messages in thread
From: Adrian Gillian Bayford @ 2017-04-03 6:14 UTC (permalink / raw)
To: Recipients
£1.5 Million Has Been Granted To You As A Donation Visit www.bbc.co.uk/news/uk-england-19254228 Sendname Address Phone for more info
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-04 19:31 Kristi Nikolla
0 siblings, 0 replies; 2775+ messages in thread
From: Kristi Nikolla @ 2017-04-04 19:31 UTC (permalink / raw)
To: ceph-devel
subscribe
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-05 16:35 bunny43200
0 siblings, 0 replies; 2775+ messages in thread
From: bunny43200 @ 2017-04-05 16:35 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: 74850.zip --]
[-- Type: application/zip, Size: 3820 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-05 16:53 dowen
0 siblings, 0 replies; 2775+ messages in thread
From: dowen @ 2017-04-05 16:53 UTC (permalink / raw)
To: linux-i2c
[-- Attachment #1: 848830461176929.zip --]
[-- Type: application/zip, Size: 3825 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-05 17:06 kgbok.kezyhumh
0 siblings, 0 replies; 2775+ messages in thread
From: kgbok.kezyhumh @ 2017-04-05 17:06 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 391771.zip --]
[-- Type: application/zip, Size: 3807 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-05 17:30 sekretariat.mzagorski-40QDpL200RxmR6Xm/wNWPw
0 siblings, 0 replies; 2775+ messages in thread
From: sekretariat.mzagorski-40QDpL200RxmR6Xm/wNWPw @ 2017-04-05 17:30 UTC (permalink / raw)
To: linux-tegra-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 89502610884.zip --]
[-- Type: application/zip, Size: 3836 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-05 18:10 alters
0 siblings, 0 replies; 2775+ messages in thread
From: alters @ 2017-04-05 18:10 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 4723.zip --]
[-- Type: application/zip, Size: 3826 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-06 6:03 bendis.michal
0 siblings, 0 replies; 2775+ messages in thread
From: bendis.michal @ 2017-04-06 6:03 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 45.zip --]
[-- Type: application/zip, Size: 3824 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-06 8:19 bendis.michal
0 siblings, 0 replies; 2775+ messages in thread
From: bendis.michal @ 2017-04-06 8:19 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 11962241.zip --]
[-- Type: application/zip, Size: 3855 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-06 11:45 j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
0 siblings, 0 replies; 2775+ messages in thread
From: j.lahoda-aRb0bU7PRFPrBKCeMvbIDA @ 2017-04-06 11:45 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 9.zip --]
[-- Type: application/zip, Size: 25 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-06 13:43 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-04-06 13:43 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 84.zip --]
[-- Type: application/zip, Size: 25 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-06 13:49 benjamin
0 siblings, 0 replies; 2775+ messages in thread
From: benjamin @ 2017-04-06 13:49 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 33943822134670.zip --]
[-- Type: application/zip, Size: 25 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-06 14:05 jacqueline.pike
0 siblings, 0 replies; 2775+ messages in thread
From: jacqueline.pike @ 2017-04-06 14:05 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 989845647886706.zip --]
[-- Type: application/zip, Size: 25 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-06 19:09 David Buckley
0 siblings, 0 replies; 2775+ messages in thread
From: David Buckley @ 2017-04-06 19:09 UTC (permalink / raw)
To: Martin K. Petersen; +Cc: linux-scsi
Martin,
I'm rather surprised nobody else has previously reported this as well,
especially as NetApp hadn't received any reports. The only probably
explanation I could think of is that EL 7 is still based on a 3.10
kernel so is too old to be affected, and that is likely to be what
most NetApp customers are running.
I've been trying to test some additional kernels to try and narrow the
versions affected, and the change in discard_granularity does not
correspond with discard failing (as you suggested).
With kernel 3.13, discard works as expected with
discard_granularity=4096 and discard_max_bytes=4194304.
With kernel 3.19, discard stops working completely, with
discard_granularity=4096 and discard_max_bytes=8388608.
Do you think the change in discard_max_bytes could be relevant? If
that comes from the VPD data it seems odd it would change.
I am wondering if part of the issue is that in my use case, UNMAP and
WRITE SAME zeros result in very different results. With thin
provisioned LUNs, UNMAP requests result in the blocks being freed and
thus shrinks the real size of the LUN allocation. If WRITE SAME
requests are used to zero the blocks, they remain allocated as part of
the LUN and thus the real size of the LUN grows to match the allocated
size (effectively thick-provisioning the LUN). This matches what I am
seeing on kernels with discard not working; running 'fstrim
/lun/mount' results in the LUN growing to its max size.
Thank you again for your help with this!
-David
On Thu, Apr 6, 2017 at 10:34 AM, Martin K. Petersen
<martin.petersen@oracle.com> wrote:
> David Buckley <dbuckley@oreilly.com> writes:
>
> David,
>
>> As I mentioned previously, I'm fairly certain that the issue I'm
>> seeing is due to the fact that while NetApp LUNs are presented as 512B
>> logical/4K physical disks for compatibility, they actually don't
>> support requests smaller than 4K (which makes sense as NetApp LUNs are
>> actually just files allocated on the 4K-block WAFL filesystem).
>
> That may be. But they should still deallocate all the whole 4K blocks
> described by an UNMAP request. Even if head and tail are not aligned.
>
>> Let me know if there's any additional information I can provide. This
>> has resulted in a 2-3x increase in raw disk requirements for some
>> workloads (unfortunately on SSD too), and I'd love to find a solution
>> that doesn't require rolling back to a 3.10 kernel.
>
> I just posted some patches yesterday that will address this (using WRITE
> SAME w/ UNMAP for block zeroing and allowing discards to be sent using
> the UNMAP command, honoring the granularity and alignment suggested by
> the device). That's 4.13 material, though.
>
> The enterprise distros have many customers using NetApp filers. I'm a
> bit puzzled why this is the first we hear of this...
>
> --
> Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-08 19:20 jbmplupus-Mmb7MZpHnFY
0 siblings, 0 replies; 2775+ messages in thread
From: jbmplupus-Mmb7MZpHnFY @ 2017-04-08 19:20 UTC (permalink / raw)
To: linux-man
[-- Attachment #1: 06153.zip --]
[-- Type: application/zip, Size: 3741 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 0:27 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-04-09 0:27 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: REPORT_489904035659357_netfilter-devel.zip --]
[-- Type: application/zip, Size: 50091 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 2:11 jacqueline.pike
0 siblings, 0 replies; 2775+ messages in thread
From: jacqueline.pike @ 2017-04-09 2:11 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: REPORT_873354716538_linux-arch.zip --]
[-- Type: application/zip, Size: 50091 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 6:12 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-04-09 6:12 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: REPORT_5908227665708_netfilter-devel.zip --]
[-- Type: application/zip, Size: 50091 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 14:11 carmen.croonquist
0 siblings, 0 replies; 2775+ messages in thread
From: carmen.croonquist @ 2017-04-09 14:11 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 69025526952_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 3630 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 14:27 weingart
0 siblings, 0 replies; 2775+ messages in thread
From: weingart @ 2017-04-09 14:27 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 84450679_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 3630 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 15:30 jha
0 siblings, 0 replies; 2775+ messages in thread
From: jha @ 2017-04-09 15:30 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 84128993426851_linux-scsi.zip --]
[-- Type: application/zip, Size: 3600 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 20:48 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-04-09 20:48 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 4_netfilter-devel.zip --]
[-- Type: application/zip, Size: 3639 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 21:15 ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: ujagu8185-Re5JQEeQqe8AvxtiuMwx3w @ 2017-04-09 21:15 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 4326157402_linux-cifs.zip --]
[-- Type: application/zip, Size: 3629 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-09 22:03 zem.uchastok
0 siblings, 0 replies; 2775+ messages in thread
From: zem.uchastok @ 2017-04-09 22:03 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 5750824004942_linux-m68k.zip --]
[-- Type: application/zip, Size: 3609 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-04-09 22:07 askeeta
0 siblings, 0 replies; 2775+ messages in thread
From: askeeta @ 2017-04-09 22:07 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: 750388275461_linux-parisc.zip --]
[-- Type: application/zip, Size: 4876 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-10 0:41 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-04-10 0:41 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 0_netfilter-devel.zip --]
[-- Type: application/zip, Size: 3606 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-10 3:30 hp
0 siblings, 0 replies; 2775+ messages in thread
From: hp @ 2017-04-10 3:30 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 7718637436266_linux-raid.zip --]
[-- Type: application/zip, Size: 3603 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-10 5:46 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-04-10 5:46 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 3_linux-crypto.zip --]
[-- Type: application/zip, Size: 3600 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-10 6:51 kathleen.gilbert
0 siblings, 0 replies; 2775+ messages in thread
From: kathleen.gilbert @ 2017-04-10 6:51 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 9214190934_netfilter-devel.zip --]
[-- Type: application/zip, Size: 3604 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-10 8:37 kkaplanidou
0 siblings, 0 replies; 2775+ messages in thread
From: kkaplanidou @ 2017-04-10 8:37 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 81477342108520_linux-scsi.zip --]
[-- Type: application/zip, Size: 2917 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-10 10:18 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-04-10 10:18 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 207_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 3705 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-10 11:47 office
0 siblings, 0 replies; 2775+ messages in thread
From: office @ 2017-04-10 11:47 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: 1707926450225_linux-leds.zip --]
[-- Type: application/zip, Size: 3714 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-13 15:58 Scott Ellentuch
0 siblings, 0 replies; 2775+ messages in thread
From: Scott Ellentuch @ 2017-04-13 15:58 UTC (permalink / raw)
To: linux-raid
for disk in a b c d g h i j k l m n
do
disklist="${disklist} /dev/sd${disk}1"
done
mdadm --create --verbose /dev/md2 --level=5 --raid=devices=12 ${disklist}
But its telling me :
mdadm: invalid number of raid devices: devices=12
I can't find any definition of a limit anywhere.
Thank you, Tuc
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-04-15 13:53 smallgroups
0 siblings, 0 replies; 2775+ messages in thread
From: smallgroups @ 2017-04-15 13:53 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: REPORT_8394710_linux-crypto.zip --]
[-- Type: application/zip, Size: 4989 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-15 14:16 demorton
0 siblings, 0 replies; 2775+ messages in thread
From: demorton @ 2017-04-15 14:16 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: REPORT_3030392596590_linux-scsi.zip --]
[-- Type: application/zip, Size: 1977 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-15 15:00 jbmplupus-Mmb7MZpHnFY
0 siblings, 0 replies; 2775+ messages in thread
From: jbmplupus-Mmb7MZpHnFY @ 2017-04-15 15:00 UTC (permalink / raw)
To: linux-man
[-- Attachment #1: REPORT_28110741209342_linux-man.zip --]
[-- Type: application/zip, Size: 2109 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 3:17 resson-epfaOiJH9AY
0 siblings, 0 replies; 2775+ messages in thread
From: resson-epfaOiJH9AY @ 2017-04-16 3:17 UTC (permalink / raw)
To: linux-rdma
[-- Attachment #1: EMAIL_89326372545_linux-rdma.zip --]
[-- Type: application/zip, Size: 3776 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 3:33 ohnesorge-wiek
0 siblings, 0 replies; 2775+ messages in thread
From: ohnesorge-wiek @ 2017-04-16 3:33 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_3725766514_linux-scsi.zip --]
[-- Type: application/zip, Size: 3496 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 6:21 shwx002
0 siblings, 0 replies; 2775+ messages in thread
From: shwx002 @ 2017-04-16 6:21 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_18980_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 3895 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 8:21 jha
0 siblings, 0 replies; 2775+ messages in thread
From: jha @ 2017-04-16 8:21 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_99997_linux-scsi.zip --]
[-- Type: application/zip, Size: 2018 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 8:52 geir.nuland
0 siblings, 0 replies; 2775+ messages in thread
From: geir.nuland @ 2017-04-16 8:52 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAIL_75980237014631_linux-acpi.zip --]
[-- Type: application/zip, Size: 2036 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 15:48 redbeardcharters
0 siblings, 0 replies; 2775+ messages in thread
From: redbeardcharters @ 2017-04-16 15:48 UTC (permalink / raw)
To: linux-perf-users
[-- Attachment #1: EMAIL_387722751_linux-perf-users.zip --]
[-- Type: application/zip, Size: 1998 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 16:31 a.skucha
0 siblings, 0 replies; 2775+ messages in thread
From: a.skucha @ 2017-04-16 16:31 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_10968724_linux-scsi.zip --]
[-- Type: application/zip, Size: 2011 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 16:37 bfoster
0 siblings, 0 replies; 2775+ messages in thread
From: bfoster @ 2017-04-16 16:37 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_65750003_linux-ext4.zip --]
[-- Type: application/zip, Size: 2002 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-04-16 17:41 askeeta
0 siblings, 0 replies; 2775+ messages in thread
From: askeeta @ 2017-04-16 17:41 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: EMAIL_52728_linux-parisc.zip --]
[-- Type: application/zip, Size: 2732 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 17:44 bkjf
0 siblings, 0 replies; 2775+ messages in thread
From: bkjf @ 2017-04-16 17:44 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_4067839100_linux-ext4.zip --]
[-- Type: application/zip, Size: 2019 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 17:49 zem.uchastok
0 siblings, 0 replies; 2775+ messages in thread
From: zem.uchastok @ 2017-04-16 17:49 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: EMAIL_28903012528_linux-m68k.zip --]
[-- Type: application/zip, Size: 2019 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 18:30 r67
0 siblings, 0 replies; 2775+ messages in thread
From: r67 @ 2017-04-16 18:30 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_9461355_linux-arch.zip --]
[-- Type: application/zip, Size: 2047 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 18:32 nathalie.colle
0 siblings, 0 replies; 2775+ messages in thread
From: nathalie.colle @ 2017-04-16 18:32 UTC (permalink / raw)
To: fstests
[-- Attachment #1: EMAIL_40898969311_fstests.zip --]
[-- Type: application/zip, Size: 2047 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 19:08 athgregory
0 siblings, 0 replies; 2775+ messages in thread
From: athgregory @ 2017-04-16 19:08 UTC (permalink / raw)
To: linux-unionfs
[-- Attachment #1: EMAIL_50905992227158_linux-unionfs.zip --]
[-- Type: application/zip, Size: 2014 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 20:59 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-04-16 20:59 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: ORDER-048568274398-linux-ide.zip --]
[-- Type: application/zip, Size: 1992 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 21:22 ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: ujagu8185-Re5JQEeQqe8AvxtiuMwx3w @ 2017-04-16 21:22 UTC (permalink / raw)
To: linux-cifs
[-- Attachment #1: COMPANY-926043103481-linux-cifs.zip --]
[-- Type: application/zip, Size: 1986 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 22:46 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-04-16 22:46 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: BILL-827602-linux-fsdevel.zip --]
[-- Type: application/zip, Size: 2036 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 23:02 brian
0 siblings, 0 replies; 2775+ messages in thread
From: brian @ 2017-04-16 23:02 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: BALLANCE-27309006728165-linux-pm.zip --]
[-- Type: application/zip, Size: 2018 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-16 23:57 muirs
0 siblings, 0 replies; 2775+ messages in thread
From: muirs @ 2017-04-16 23:57 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: DOLLARS-47818843-linux-next.zip --]
[-- Type: application/zip, Size: 2040 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 0:43 John Ewalt
0 siblings, 0 replies; 2775+ messages in thread
From: John Ewalt @ 2017-04-17 0:43 UTC (permalink / raw)
To: linux-mmc
Hi all,
I am not sure if this is the right way to ask a question about SD cards, so
please correct me as I am new to Linux kernel development.
I am currently working with a Intel Joule SOM and development board
(Broxton M core) and when I insert the SD card, it is recognized as a
SDR104 UHS-I card. Since this host has the MMC_CAP_AGGRESSIVE_PM bit set,
it is suspended. That all works as expected. When the card is resumed,
the OCR is read expecting bit 24 (switch to 1.8 V accepted (S18A)) to be
set, but it is clear as the card is still at 1.8v signaling since it was
never powered down during the suspend.
I see 3 ways to solve this problem:
First, power down the card during suspend. I think this is the intended
behavior but there is no power manager registered to this host (as
compiled) and I'm not sure how to add one, let alone the hardware changes
necessary to implement the powering down of the sd card.
Second, don't suspend (I have tested this and it works as the card is not
suspended)
Third, the host could remember that the card was at 1.8v signaling and if
it will not "switch" to 1.8v, assume it is at 1.8v and go through the
uhs_setup anyway. I have tried this too and it works for UHS cards, but I
doubt it would be the right change.
I would appreciate any help or direction anyone can provide as I would
really like to use my fast card at the full data rates. I am currently
setup to test any suggestions you have.
Thank you all,
-John
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 2:06 rlm85310
0 siblings, 0 replies; 2775+ messages in thread
From: rlm85310 @ 2017-04-17 2:06 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: SALE-78001048-linux-ext4.zip --]
[-- Type: application/zip, Size: 2032 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 2:26 wvhyvcm.abyxg
0 siblings, 0 replies; 2775+ messages in thread
From: wvhyvcm.abyxg @ 2017-04-17 2:26 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: BALLANCE-84324839693493-netfilter-devel.zip --]
[-- Type: application/zip, Size: 2001 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 3:09 bunny43200
0 siblings, 0 replies; 2775+ messages in thread
From: bunny43200 @ 2017-04-17 3:09 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: TRAMP-5135069821-linux-leds.zip --]
[-- Type: application/zip, Size: 1984 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 3:38 kgbok.kezyhumh
0 siblings, 0 replies; 2775+ messages in thread
From: kgbok.kezyhumh @ 2017-04-17 3:38 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: $MONEY-840640779540345-linux-pm.zip --]
[-- Type: application/zip, Size: 2015 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 4:06 nkosuta-f+iqBESB6gc
0 siblings, 0 replies; 2775+ messages in thread
From: nkosuta-f+iqBESB6gc @ 2017-04-17 4:06 UTC (permalink / raw)
To: devicetree
[-- Attachment #1: $MONEY-52123352603-devicetree.zip --]
[-- Type: application/zip, Size: 2171 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 7:56 lucia.germino
0 siblings, 0 replies; 2775+ messages in thread
From: lucia.germino @ 2017-04-17 7:56 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: SHOP-36997868037949-linux-ide.zip --]
[-- Type: application/zip, Size: 2032 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 15:20 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-04-17 15:20 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_111852059-linux-arch.zip --]
[-- Type: application/zip, Size: 1216 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-17 18:00 j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
0 siblings, 0 replies; 2775+ messages in thread
From: j.lahoda-aRb0bU7PRFPrBKCeMvbIDA @ 2017-04-17 18:00 UTC (permalink / raw)
To: linux-efi
[-- Attachment #1: EMAIL_12394528480_linux-efi.zip --]
[-- Type: application/zip, Size: 1210 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-18 2:53 h.piontek
0 siblings, 0 replies; 2775+ messages in thread
From: h.piontek @ 2017-04-18 2:53 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAIL_259096023_linux-acpi.zip --]
[-- Type: application/zip, Size: 1206 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-04-18 10:57 catherine.verge
0 siblings, 0 replies; 2775+ messages in thread
From: catherine.verge @ 2017-04-18 10:57 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: EMAIL_7905004_linux-parisc.zip --]
[-- Type: application/zip, Size: 1654 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-18 16:05 rlm85310
0 siblings, 0 replies; 2775+ messages in thread
From: rlm85310 @ 2017-04-18 16:05 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_91332296_linux-ext4.zip --]
[-- Type: application/zip, Size: 1186 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-19 16:38 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-04-19 16:38 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_3155533888_netfilter-devel.zip --]
[-- Type: application/zip, Size: 1224 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-19 20:46 hp
0 siblings, 0 replies; 2775+ messages in thread
From: hp @ 2017-04-19 20:46 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_7992249_linux-raid.zip --]
[-- Type: application/zip, Size: 1431 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-20 6:33 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-04-20 6:33 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_58224147405751_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 1421 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-20 12:28 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-04-20 12:28 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_5770253913775_linux-arch.zip --]
[-- Type: application/zip, Size: 1397 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 7:38 wesley.sydnor
0 siblings, 0 replies; 2775+ messages in thread
From: wesley.sydnor @ 2017-04-21 7:38 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_751643779_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 2213 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 8:36 joseph.x.hronec
0 siblings, 0 replies; 2775+ messages in thread
From: joseph.x.hronec @ 2017-04-21 8:36 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: EMAIL_7493740125_linux-pm.zip --]
[-- Type: application/zip, Size: 2176 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 9:25 delaware.orders
0 siblings, 0 replies; 2775+ messages in thread
From: delaware.orders @ 2017-04-21 9:25 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: EMAIL_4680172734_linux-crypto.zip --]
[-- Type: application/zip, Size: 2191 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 9:51 Kredit
0 siblings, 0 replies; 2775+ messages in thread
From: Kredit @ 2017-04-21 9:51 UTC (permalink / raw)
Hallo
Wir bieten Darlehen von 5.000,00 Euro bis 20.000.000,00 Euro mit einer maximalen Rückzahlungsdauer von 30 Jahren zu 1.9% Zinssatz.
Wenn Sie interessiert sind, kontaktieren Sie uns per E-Mail: myers.terrylynn@aol.com
Mrs. Myers Terry Lynn.
Darlehen / Finanzdienstleister.
myers.terrylynn@universalcreditllc.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 11:49 kathleen.gilbert
0 siblings, 0 replies; 2775+ messages in thread
From: kathleen.gilbert @ 2017-04-21 11:49 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_27944_netfilter-devel.zip --]
[-- Type: application/zip, Size: 2190 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-04-21 16:59 Mr.Jerry Smith
0 siblings, 0 replies; 2775+ messages in thread
From: Mr.Jerry Smith @ 2017-04-21 16:59 UTC (permalink / raw)
We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv With Amount Needed And Phone Number.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 17:06 Mr.Jerry Smith
0 siblings, 0 replies; 2775+ messages in thread
From: Mr.Jerry Smith @ 2017-04-21 17:06 UTC (permalink / raw)
We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv With Amount Needed And Phone Number.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 17:07 Mr.Jerry Smith
0 siblings, 0 replies; 2775+ messages in thread
From: Mr.Jerry Smith @ 2017-04-21 17:07 UTC (permalink / raw)
We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv With Amount Needed And Phone Number.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 17:24 Mr.Jerry Smith
0 siblings, 0 replies; 2775+ messages in thread
From: Mr.Jerry Smith @ 2017-04-21 17:24 UTC (permalink / raw)
We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv With Amount Needed And Phone Number.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 17:40 Mr.Jerry Smith
0 siblings, 0 replies; 2775+ messages in thread
From: Mr.Jerry Smith @ 2017-04-21 17:40 UTC (permalink / raw)
We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv With Amount Needed And Phone Number.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 17:44 Mr.Jerry Smith
0 siblings, 0 replies; 2775+ messages in thread
From: Mr.Jerry Smith @ 2017-04-21 17:44 UTC (permalink / raw)
We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv With Amount Needed And Phone Number.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-21 17:54 Mr.Jerry Smith
0 siblings, 0 replies; 2775+ messages in thread
From: Mr.Jerry Smith @ 2017-04-21 17:54 UTC (permalink / raw)
We Give Out Loans At 3% Interest Rate And We Offer Loans From $5,000 To $50,000,000.00, Are You Looking To Buy A House Car Or Company Or Start Up A Truck Company or Buy A Truck Or Personal Loans Or Business Loan, Email Us At jerryfunds11@inbox.lv With Amount Needed And Phone Number.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-26 7:36 glolariu
0 siblings, 0 replies; 2775+ messages in thread
From: glolariu @ 2017-04-26 7:36 UTC (permalink / raw)
To: linux man
Good afternoon Linux
http://www.noeliavega.com/fonts/pt-sans/license.php?interest=rzm260ek0w9
Glolariu
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-04-26 11:54 Shalini Chellathurai Saroja
0 siblings, 0 replies; 2775+ messages in thread
From: Shalini Chellathurai Saroja @ 2017-04-26 11:54 UTC (permalink / raw)
To: kvm
subscribe kvm
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-28 8:20 Anatolij Gustschin
0 siblings, 0 replies; 2775+ messages in thread
From: Anatolij Gustschin @ 2017-04-28 8:20 UTC (permalink / raw)
To: linus.walleij, gnurou; +Cc: andy.shevchenko, linux-gpio, linux-kernel
Subject: [PATCH v3] gpiolib: Add stubs for gpiod lookup table interface
Add stubs for gpiod_add_lookup_table() and gpiod_remove_lookup_table()
for the !GPIOLIB case to prevent build errors. Also add prototypes.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
Changes in v3:
- add stubs for !GPIOLIB case. Drop prototypes, these are
already in gpio/machine.h
Changes in v2:
- move gpiod_lookup_table out of #ifdef
include/linux/gpio/consumer.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 8f702fc..cf3fee2 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -41,6 +41,8 @@ enum gpiod_flags {
GPIOD_FLAGS_BIT_DIR_VAL,
};
+struct gpiod_lookup_table;
+
#ifdef CONFIG_GPIOLIB
/* Return the number of GPIOs associated with a device / function */
@@ -435,6 +437,12 @@ struct gpio_desc *devm_fwnode_get_index_gpiod_from_child(struct device *dev,
return ERR_PTR(-ENOSYS);
}
+static inline
+void gpiod_add_lookup_table(struct gpiod_lookup_table *table) {}
+
+static inline
+void gpiod_remove_lookup_table(struct gpiod_lookup_table *table) {}
+
#endif /* CONFIG_GPIOLIB */
static inline
--
2.7.4
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-04-28 8:36 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-04-28 8:36 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...635829wjxnxl....74990.RU.2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-28 8:36 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-04-28 8:36 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...635829wjxnxl....74990.RU.2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-28 8:36 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-04-28 8:36 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...635829wjxnxl....74990.RU.2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-04-28 8:36 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-04-28 8:36 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...635829wjxnxl....74990.RU.2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: [PATCHv2 1/1] IB/ipoib: add get_settings in ethtool
@ 2017-05-01 18:59 Doug Ledford
[not found] ` <1493665155.3041.186.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
0 siblings, 1 reply; 2775+ messages in thread
From: Doug Ledford @ 2017-05-01 18:59 UTC (permalink / raw)
To: Thomas Bogendoerfer, Zhu Yanjun
Cc: sean.hefty-ral2JQCrhuEAvxtiuMwx3w,
hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w,
linux-rdma-u79uwXL29TY76Z2rM5mHXA,
yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA,
haakon.bugge-QHcLZuEGTsvQT0dZR+AlfA,
wen.gang.wang-QHcLZuEGTsvQT0dZR+AlfA,
joe.jin-QHcLZuEGTsvQT0dZR+AlfA, junxiao.bi-QHcLZuEGTsvQT0dZR+AlfA
On Wed, 2017-04-26 at 11:31 +0200, Thomas Bogendoerfer wrote:
> On Wed, 26 Apr 2017 05:02:34 -0400
> Zhu Yanjun <yanjun.zhu-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org> wrote:
>
> >
> > In order to let the bonding driver report the correct speed
> > of the underlaying interfaces, when they are IPoIB, the ethtool
> > function get_settings() in the IPoIB driver is implemented.
>
> FYI get_settings is DEPRECATED. Wouldn't it make more sense to
> directly
> implement get_link_ksettings ?
Indeed, please redo this patchset using the preferred method of getting
link settings. Thanks.
--
Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
GPG KeyID: B826A3330E572FDD
Key fingerprint = AE6B 1BDA 122B 23B4 265B 1274 B826 A333 0E57 2FDD
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-05-04 13:20 Steve French
0 siblings, 0 replies; 2775+ messages in thread
From: Steve French @ 2017-05-04 13:20 UTC (permalink / raw)
To: Long Li, linux-cifs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Pavel Shilovskiy
[-- Attachment #1: Type: text/plain, Size: 465 bytes --]
Any thoughts on removing the dependency on srv_mutex in deleting
completed requests (and freeing its memory) ? Otherwise it can cause
problems with long running socket writes (on sending new requests)
which don't get the benefit of finishing up response processing due to
the blocking of DeleteMidQEntry on server->srv_mutex
This should improve performance as well.
(Long Li was noticing this looking at RDMA with cifs.ko)
See attached patch
--
Thanks,
Steve
[-- Attachment #2: 0001-CIFS-Don-t-delay-freeing-mids-when-blocked-on-slow-s.patch --]
[-- Type: text/x-patch, Size: 4037 bytes --]
From 429bb0e9da0db34bf75d5335fe6b4011db8765ad Mon Sep 17 00:00:00 2001
From: Steve French <smfrench@gmail.com>
Date: Thu, 4 May 2017 07:54:04 -0500
Subject: [PATCH] [CIFS] Don't delay freeing mids when blocked on slow socket
write of request
When processing responses, and in particular freeing mids (DeleteMidQEntry),
which is very important since it also frees the associated buffers (cifs_buf_release),
we can block a long time if (writes to) socket is slow due to low memory or networking
issues.
We can block in send (smb request) waiting for memory, and be blocked in processing
responess (which could free memory if we let it) - since they both grab the
server->srv_mutex.
In practice, in the DeleteMidQEntry case - there is no reason we need to
grab the srv_mutex so remove these around DeleteMidQEntry, and it allows
us to free memory faster.
Signed-off-by: Steve French <steve.french@primarydata.com>
---
fs/cifs/cifssmb.c | 7 -------
fs/cifs/smb2pdu.c | 7 -------
fs/cifs/transport.c | 2 --
3 files changed, 16 deletions(-)
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 205fd94..5245723 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -697,9 +697,7 @@ static int validate_t2(struct smb_t2_rsp *pSMB)
{
struct TCP_Server_Info *server = mid->callback_data;
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, 1, CIFS_ECHO_OP);
}
@@ -1599,9 +1597,7 @@ static __u16 convert_disposition(int disposition)
}
queue_work(cifsiod_wq, &rdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, 1, 0);
}
@@ -2058,7 +2054,6 @@ struct cifs_writedata *
{
struct cifs_writedata *wdata = mid->callback_data;
struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
- struct TCP_Server_Info *server = tcon->ses->server;
unsigned int written;
WRITE_RSP *smb = (WRITE_RSP *)mid->resp_buf;
@@ -2095,9 +2090,7 @@ struct cifs_writedata *
}
queue_work(cifsiod_wq, &wdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(tcon->ses->server, 1, 0);
}
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 0fd63f0..e4007ee 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2172,9 +2172,7 @@ static inline void init_copy_chunk_defaults(struct cifs_tcon *tcon)
if (mid->mid_state == MID_RESPONSE_RECEIVED)
credits_received = le16_to_cpu(rsp->hdr.sync_hdr.CreditRequest);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, credits_received, CIFS_ECHO_OP);
}
@@ -2432,9 +2430,7 @@ void smb2_reconnect_server(struct work_struct *work)
cifs_stats_fail_inc(tcon, SMB2_READ_HE);
queue_work(cifsiod_wq, &rdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, credits_received, 0);
}
@@ -2593,7 +2589,6 @@ void smb2_reconnect_server(struct work_struct *work)
{
struct cifs_writedata *wdata = mid->callback_data;
struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
- struct TCP_Server_Info *server = tcon->ses->server;
unsigned int written;
struct smb2_write_rsp *rsp = (struct smb2_write_rsp *)mid->resp_buf;
unsigned int credits_received = 1;
@@ -2633,9 +2628,7 @@ void smb2_reconnect_server(struct work_struct *work)
cifs_stats_fail_inc(tcon, SMB2_WRITE_HE);
queue_work(cifsiod_wq, &wdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(tcon->ses->server, credits_received, 0);
}
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 4d64b5b..de589d0 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -613,9 +613,7 @@ struct mid_q_entry *
}
spin_unlock(&GlobalMid_Lock);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
return rc;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-05-11 1:02 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-05-11 1:02 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1: 898372657368076_dri-devel.zip --]
[-- Type: application/zip, Size: 2851 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-14 3:19 unixkeeper
0 siblings, 0 replies; 2775+ messages in thread
From: unixkeeper @ 2017-05-14 3:19 UTC (permalink / raw)
To: linux-bcache
reg
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-16 3:06 armiksanaye
0 siblings, 0 replies; 2775+ messages in thread
From: armiksanaye @ 2017-05-16 3:06 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_94744_linux-scsi.zip --]
[-- Type: application/zip, Size: 2116 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-17 7:10 1.10.0812112155390.21775
0 siblings, 0 replies; 2775+ messages in thread
From: 1.10.0812112155390.21775 @ 2017-05-17 7:10 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 056305.zip --]
[-- Type: application/zip, Size: 2929 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-18 13:40 hp
0 siblings, 0 replies; 2775+ messages in thread
From: hp @ 2017-05-18 13:40 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 2518423.zip --]
[-- Type: application/zip, Size: 4661 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-18 13:41 alters
0 siblings, 0 replies; 2775+ messages in thread
From: alters @ 2017-05-18 13:41 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 449685.zip --]
[-- Type: application/zip, Size: 4787 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-18 14:13 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-05-18 14:13 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 233627250363201.zip --]
[-- Type: application/zip, Size: 4829 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-18 16:47 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-05-18 16:47 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 40144986.zip --]
[-- Type: application/zip, Size: 4845 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-18 19:22 lucia.germino
0 siblings, 0 replies; 2775+ messages in thread
From: lucia.germino @ 2017-05-18 19:22 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 6078544384.zip --]
[-- Type: application/zip, Size: 2928 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-19 4:32 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-05-19 4:32 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 6070538009916.zip --]
[-- Type: application/zip, Size: 2908 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-19 6:45 j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
0 siblings, 0 replies; 2775+ messages in thread
From: j.lahoda-aRb0bU7PRFPrBKCeMvbIDA @ 2017-05-19 6:45 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 27843789264095.zip --]
[-- Type: application/zip, Size: 2870 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-19 11:45 counselling-30L6jp03H7UtpYsHHOQ6Llpr/1R2p/CL
0 siblings, 0 replies; 2775+ messages in thread
From: counselling-30L6jp03H7UtpYsHHOQ6Llpr/1R2p/CL @ 2017-05-19 11:45 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 8991909.zip --]
[-- Type: application/zip, Size: 2916 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-19 13:31 office
0 siblings, 0 replies; 2775+ messages in thread
From: office @ 2017-05-19 13:31 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: 13476503689.zip --]
[-- Type: application/zip, Size: 2885 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-19 14:51 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-05-19 14:51 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 128734285588468.zip --]
[-- Type: application/zip, Size: 2883 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-19 15:35 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-05-19 15:35 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 57847049147979.zip --]
[-- Type: application/zip, Size: 2923 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-19 16:59 zumbalisa
0 siblings, 0 replies; 2775+ messages in thread
From: zumbalisa @ 2017-05-19 16:59 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 032259416649.zip --]
[-- Type: application/zip, Size: 2894 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 0:26 brian
0 siblings, 0 replies; 2775+ messages in thread
From: brian @ 2017-05-20 0:26 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 843245271.zip --]
[-- Type: application/zip, Size: 2945 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 0:40 sophie.norman
0 siblings, 0 replies; 2775+ messages in thread
From: sophie.norman @ 2017-05-20 0:40 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 260009073203663.zip --]
[-- Type: application/zip, Size: 2939 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 1:09 board
0 siblings, 0 replies; 2775+ messages in thread
From: board @ 2017-05-20 1:09 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 17734612411.zip --]
[-- Type: application/zip, Size: 2913 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 8:14 ecaterinasuciu09
0 siblings, 0 replies; 2775+ messages in thread
From: ecaterinasuciu09 @ 2017-05-20 8:14 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 0482411662588.zip --]
[-- Type: application/zip, Size: 2825 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 9:40 mgriffit
0 siblings, 0 replies; 2775+ messages in thread
From: mgriffit @ 2017-05-20 9:40 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 64749729775761.zip --]
[-- Type: application/zip, Size: 2868 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 11:03 pohut00
0 siblings, 0 replies; 2775+ messages in thread
From: pohut00 @ 2017-05-20 11:03 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 82304.zip --]
[-- Type: application/zip, Size: 2820 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 11:47 john.dahlberg
0 siblings, 0 replies; 2775+ messages in thread
From: john.dahlberg @ 2017-05-20 11:47 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 899954395.zip --]
[-- Type: application/zip, Size: 2920 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 12:27 ajae
0 siblings, 0 replies; 2775+ messages in thread
From: ajae @ 2017-05-20 12:27 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 1415432.zip --]
[-- Type: application/zip, Size: 2909 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 14:29 cv
0 siblings, 0 replies; 2775+ messages in thread
From: cv @ 2017-05-20 14:29 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 65318589.zip --]
[-- Type: application/zip, Size: 2878 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 16:22 alters
0 siblings, 0 replies; 2775+ messages in thread
From: alters @ 2017-05-20 16:22 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 4380970736.zip --]
[-- Type: application/zip, Size: 2837 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 17:45 counselling-30L6jp03H7UtpYsHHOQ6Llpr/1R2p/CL
0 siblings, 0 replies; 2775+ messages in thread
From: counselling-30L6jp03H7UtpYsHHOQ6Llpr/1R2p/CL @ 2017-05-20 17:45 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 9301738364993.zip --]
[-- Type: application/zip, Size: 2890 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 18:58 office
0 siblings, 0 replies; 2775+ messages in thread
From: office @ 2017-05-20 18:58 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: 22687017334589.zip --]
[-- Type: application/zip, Size: 1271 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 20:00 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-05-20 20:00 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 39874.zip --]
[-- Type: application/zip, Size: 2821 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-20 21:16 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-05-20 21:16 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 31217786072134.zip --]
[-- Type: application/zip, Size: 2902 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 8:42 brucet
0 siblings, 0 replies; 2775+ messages in thread
From: brucet @ 2017-05-21 8:42 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 00725.zip --]
[-- Type: application/zip, Size: 2874 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 8:55 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-05-21 8:55 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 5812262.zip --]
[-- Type: application/zip, Size: 2921 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 8:55 benjamin
0 siblings, 0 replies; 2775+ messages in thread
From: benjamin @ 2017-05-21 8:55 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 087833.zip --]
[-- Type: application/zip, Size: 2855 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 9:17 jacqueline.pike
0 siblings, 0 replies; 2775+ messages in thread
From: jacqueline.pike @ 2017-05-21 9:17 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 544961.zip --]
[-- Type: application/zip, Size: 2917 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 11:13 mariobronti
0 siblings, 0 replies; 2775+ messages in thread
From: mariobronti @ 2017-05-21 11:13 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 37588996.zip --]
[-- Type: application/zip, Size: 39559 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 11:38 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-05-21 11:38 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 0580348.zip --]
[-- Type: application/zip, Size: 39559 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 13:56 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-05-21 13:56 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 295991102.zip --]
[-- Type: application/zip, Size: 39559 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 16:36 x1kn8fk
0 siblings, 0 replies; 2775+ messages in thread
From: x1kn8fk @ 2017-05-21 16:36 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 697470622.zip --]
[-- Type: application/zip, Size: 39559 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-21 20:35 armiksanaye
0 siblings, 0 replies; 2775+ messages in thread
From: armiksanaye @ 2017-05-21 20:35 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 66504.zip --]
[-- Type: application/zip, Size: 3178 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-22 16:10 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-05-22 16:10 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 5877262087.zip --]
[-- Type: application/zip, Size: 3116 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-22 20:39 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2017-05-22 20:39 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 66593863594.zip --]
[-- Type: application/zip, Size: 3156 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-22 22:32 patientcentral
0 siblings, 0 replies; 2775+ messages in thread
From: patientcentral @ 2017-05-22 22:32 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 8395290876929.zip --]
[-- Type: application/zip, Size: 3190 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-23 2:19 mdavis
0 siblings, 0 replies; 2775+ messages in thread
From: mdavis @ 2017-05-23 2:19 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 6775563555.zip --]
[-- Type: application/zip, Size: 3184 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-23 4:53 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-05-23 4:53 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 002602599.zip --]
[-- Type: application/zip, Size: 3215 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-23 8:42 delaware.orders
0 siblings, 0 replies; 2775+ messages in thread
From: delaware.orders @ 2017-05-23 8:42 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 0880469378.zip --]
[-- Type: application/zip, Size: 3197 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-23 9:36 bendis.michal
0 siblings, 0 replies; 2775+ messages in thread
From: bendis.michal @ 2017-05-23 9:36 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 1443947.zip --]
[-- Type: application/zip, Size: 3175 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-23 16:24 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-05-23 16:24 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 146902373.zip --]
[-- Type: application/zip, Size: 3207 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-23 16:29 benjamin
0 siblings, 0 replies; 2775+ messages in thread
From: benjamin @ 2017-05-23 16:29 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 73458503834697.zip --]
[-- Type: application/zip, Size: 3207 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-23 22:44 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-05-23 22:44 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 6211920350.zip --]
[-- Type: application/zip, Size: 3191 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-24 16:26 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-05-24 16:26 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 2605145.zip --]
[-- Type: application/zip, Size: 3160 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-05-26 16:33 Anderson McEnany <
0 siblings, 0 replies; 2775+ messages in thread
From: Anderson McEnany < @ 2017-05-26 16:33 UTC (permalink / raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2030 bytes --]
lisoch@veco.ru
>
Subject: Gegenseitiger Partnervorschlag
Date: Fri, 26 May 2017 18:15:45 +0200
MIME-Version: 1.0
Content-Type: text/plain;
charset="Windows-1251"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Lieber Freund,
Vielen Dank, dass Sie sich die Zeit genommen haben, meinen gegenseitigen Geschäftsvorschlag zu Ihnen zu lesen. Mein Name ist Herr Anderson McEnany, Investment Manager bei der City Bank New York, USA.
Mein Ziel, Ihnen den Vorschlag zu schreiben, ist, weil ich einen europäischen Klienten habe, dass ich geholfen habe, eine Reihe von seinen Investitionen im Mittleren Osten mit einer Einlagensumme von USD21 Millionen Dollar zu verwalten, bis vor etwa fünf Jahren, als er plötzlich verstarb und seit fast 4 Jahren Ich habe nach seinen Verwandten gesucht und schließlich entdeckte ich, dass er keine lebenden Verwandten hatte.
Mein Vorschlag an Sie ist, mit Ihnen in der Deal zu arbeiten, ich beabsichtige, Sie als die nächste Angehörige zu präsentieren, die es legal für Sie machen wird, die Ablagerung für eine der folgenden Angehörigen zu erhalten.
Beide von uns werden gleichberechtigte Partner in diesem Deal sein und ich werde von Ihnen abhängen, um den Gesamtbetrag in Ihrem Konto zu erhalten. Weitere Informationen, die ich Ihnen geben werde, um meinen Anteil an den Mitteln zu überweisen.
Schließlich, wenn du es interessierst, könntest du doch so freundlich sein, mir deine vollen Namen zu schicken, Adresse und direkte Telefonnummern und auch könntest du mir von dir erzählen und was du für das Leben tust, weil das eine riesige finanzielle Transaktion ist und ich will sicher sein Dass du diese Transaktion bearbeiten kannst. An der Bank, wo die Gelder hinterlegt sind.
Ihre dringende Antwort wird geschätzt, bitte senden Sie Ihre Antwort Nachricht an diese vertrauliche E-Mail Adresse: Anderson_mcenany@gmx.com.
Freundliche Grüße,
Herr Anderson McEnany
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-05-26 16:33 Anderson McEnany <
0 siblings, 0 replies; 2775+ messages in thread
From: Anderson McEnany < @ 2017-05-26 16:33 UTC (permalink / raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2030 bytes --]
lisoch@veco.ru
>
Subject: Gegenseitiger Partnervorschlag
Date: Fri, 26 May 2017 18:15:45 +0200
MIME-Version: 1.0
Content-Type: text/plain;
charset="Windows-1251"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2600.0000
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
Lieber Freund,
Vielen Dank, dass Sie sich die Zeit genommen haben, meinen gegenseitigen Geschäftsvorschlag zu Ihnen zu lesen. Mein Name ist Herr Anderson McEnany, Investment Manager bei der City Bank New York, USA.
Mein Ziel, Ihnen den Vorschlag zu schreiben, ist, weil ich einen europäischen Klienten habe, dass ich geholfen habe, eine Reihe von seinen Investitionen im Mittleren Osten mit einer Einlagensumme von USD21 Millionen Dollar zu verwalten, bis vor etwa fünf Jahren, als er plötzlich verstarb und seit fast 4 Jahren Ich habe nach seinen Verwandten gesucht und schließlich entdeckte ich, dass er keine lebenden Verwandten hatte.
Mein Vorschlag an Sie ist, mit Ihnen in der Deal zu arbeiten, ich beabsichtige, Sie als die nächste Angehörige zu präsentieren, die es legal für Sie machen wird, die Ablagerung für eine der folgenden Angehörigen zu erhalten.
Beide von uns werden gleichberechtigte Partner in diesem Deal sein und ich werde von Ihnen abhängen, um den Gesamtbetrag in Ihrem Konto zu erhalten. Weitere Informationen, die ich Ihnen geben werde, um meinen Anteil an den Mitteln zu überweisen.
Schließlich, wenn du es interessierst, könntest du doch so freundlich sein, mir deine vollen Namen zu schicken, Adresse und direkte Telefonnummern und auch könntest du mir von dir erzählen und was du für das Leben tust, weil das eine riesige finanzielle Transaktion ist und ich will sicher sein Dass du diese Transaktion bearbeiten kannst. An der Bank, wo die Gelder hinterlegt sind.
Ihre dringende Antwort wird geschätzt, bitte senden Sie Ihre Antwort Nachricht an diese vertrauliche E-Mail Adresse: Anderson_mcenany@gmx.com.
Freundliche Grüße,
Herr Anderson McEnany
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-31 11:36 p.mueller-spz-hgw-Mmb7MZpHnFY
0 siblings, 0 replies; 2775+ messages in thread
From: p.mueller-spz-hgw-Mmb7MZpHnFY @ 2017-05-31 11:36 UTC (permalink / raw)
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 775_linux-rdma.zip --]
[-- Type: application/zip, Size: 3334 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-05-31 14:53 tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w @ 2017-05-31 14:53 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 76390.zip --]
[-- Type: application/zip, Size: 3189 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-01 0:43 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-06-01 0:43 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 382518.zip --]
[-- Type: application/zip, Size: 3175 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-01 1:55 cdevries
0 siblings, 0 replies; 2775+ messages in thread
From: cdevries @ 2017-06-01 1:55 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 3483483188.zip --]
[-- Type: application/zip, Size: 3174 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-01 2:25 kbennett
0 siblings, 0 replies; 2775+ messages in thread
From: kbennett @ 2017-06-01 2:25 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 652137435079.zip --]
[-- Type: application/zip, Size: 3170 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-01 2:26 Dave Airlie
0 siblings, 0 replies; 2775+ messages in thread
From: Dave Airlie @ 2017-06-01 2:26 UTC (permalink / raw)
To: Linus Torvalds; +Cc: LKML, dri-devel
Hi Linus,
This is the main set of fixes for rc4, one amdgpu fix, some exynos
regression fixes, some msm fixes and some i915 and GVT fixes.
I've got a second regression fix for some DP chips that might be a bit
large, but I think we'd like to land it now, I'll send it along
tomorrow, once you are happy with this set.
Dave.
The following changes since commit 5ed02dbb497422bf225783f46e6eadd237d23d6b:
Linux 4.12-rc3 (2017-05-28 17:20:53 -0700)
are available in the git repository at:
git://people.freedesktop.org/~airlied/linux tags/drm-fixes-for-v4.12-rc4
for you to fetch changes up to 400129f0a3ae989c30b37104bbc23b35c9d7a9a4:
Merge tag 'exynos-drm-fixes-for-v4.12' of
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into
drm-fixes (2017-06-01 12:07:48 +1000)
----------------------------------------------------------------
msm/exynos/i915/amdgpu fixes
----------------------------------------------------------------
Changbin Du (1):
drm/i915/gvt: clean up unsubmited workloads before destroying kmem cache
Chris Wilson (1):
drm/i915/selftests: Silence compiler warning in igt_ctx_exec
Chuanxiao Dong (2):
drm/i915: set initialised only when init_context callback is NULL
drm/i915/gvt: Disable compression workaround for Gen9
Daniel Vetter (2):
Revert "drm/i915: Restore lost "Initialized i915" welcome message"
drm/exynos: Merge pre/postclose hooks
Dave Airlie (4):
Merge tag 'drm-intel-fixes-2017-05-29' of
git://anongit.freedesktop.org/git/drm-intel into drm-fixes
Merge branch 'msm-fixes-4.12-rc4' of
git://people.freedesktop.org/~robclark/linux into drm-fixes
Merge branch 'drm-fixes-4.12' of
git://people.freedesktop.org/~agd5f/linux into drm-fixes
Merge tag 'exynos-drm-fixes-for-v4.12' of
git://git.kernel.org/.../daeinki/drm-exynos into drm-fixes
Eric Anholt (2):
drm/msm: Expose our reservation object when exporting a dmabuf.
drm/msm: Reuse dma_fence_release.
Hans de Goede (1):
drm/i915: Fix new -Wint-in-bool-context gcc compiler warning
Hoegeun Kwon (2):
drm/exynos: dsi: Fix the parse_dt function
drm/exynos: dsi: Remove bridge node reference in removal
Inki Dae (1):
drm/exynos: clean up description of exynos_drm_crtc
Jani Nikula (1):
Merge tag 'gvt-fixes-2017-05-25' of
https://github.com/01org/gvt-linux into drm-intel-fixes
Joonas Lahtinen (1):
drm/i915: Do not sync RCU during shrinking
Jordan Crouse (2):
drm/msm: Take the mutex before calling msm_gem_new_impl
drm/msm: Fix the check for the command size
Leo Liu (1):
drm/amdgpu: Program ring for vce instance 1 at its register space
Matthew Auld (1):
drm/i915: use vma->size for appgtt allocate_va_range
Philipp Zabel (1):
drm/msm: for array in-fences, check if all backing fences are
from our own context before waiting
Rob Clark (4):
drm/msm: select PM_OPP
drm/msm/mdp5: use __drm_atomic_helper_plane_duplicate_state()
drm/msm/gpu: check legacy clk names in get_clocks()
drm/msm/mdp5: release hwpipe(s) for unused planes
Tobias Klauser (1):
drm/msm: constify irq_domain_ops
Ville Syrjälä (1):
drm/i915: Stop pretending to mask/unmask LPE audio interrupts
drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 95 ++++++++++++++++-------
drivers/gpu/drm/exynos/exynos_drm_drv.c | 8 +-
drivers/gpu/drm/exynos/exynos_drm_drv.h | 5 +-
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 26 +++----
drivers/gpu/drm/i915/gvt/execlist.c | 30 ++++---
drivers/gpu/drm/i915/gvt/handlers.c | 30 ++++---
drivers/gpu/drm/i915/i915_drv.c | 4 -
drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +-
drivers/gpu/drm/i915/i915_gem_shrinker.c | 5 --
drivers/gpu/drm/i915/i915_irq.c | 15 ++--
drivers/gpu/drm/i915/i915_reg.h | 2 +-
drivers/gpu/drm/i915/intel_lpe_audio.c | 36 ---------
drivers/gpu/drm/i915/intel_lrc.c | 2 +-
drivers/gpu/drm/i915/selftests/i915_gem_context.c | 8 +-
drivers/gpu/drm/msm/Kconfig | 1 +
drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.c | 2 +-
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 9 ++-
drivers/gpu/drm/msm/msm_drv.c | 1 +
drivers/gpu/drm/msm/msm_drv.h | 1 +
drivers/gpu/drm/msm/msm_fence.c | 10 +--
drivers/gpu/drm/msm/msm_gem.c | 6 ++
drivers/gpu/drm/msm/msm_gem_prime.c | 7 ++
drivers/gpu/drm/msm/msm_gem_submit.c | 14 ++--
drivers/gpu/drm/msm/msm_gpu.c | 4 +-
24 files changed, 169 insertions(+), 154 deletions(-)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-06-01 20:40 nbensoncole81
0 siblings, 0 replies; 2775+ messages in thread
From: nbensoncole81 @ 2017-06-01 20:40 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 208405710.zip --]
[-- Type: application/zip, Size: 3155 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-02 8:02 jessica.jones-PnMVE5gNl/Vkbu+0n/iG1Q
0 siblings, 0 replies; 2775+ messages in thread
From: jessica.jones-PnMVE5gNl/Vkbu+0n/iG1Q @ 2017-06-02 8:02 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 6161255567811.zip --]
[-- Type: application/zip, Size: 3144 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-03 5:45 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-06-03 5:45 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 34618930.zip --]
[-- Type: application/zip, Size: 3162 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-03 7:17 nbensoncole81
0 siblings, 0 replies; 2775+ messages in thread
From: nbensoncole81 @ 2017-06-03 7:17 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 6713067025.zip --]
[-- Type: application/zip, Size: 3162 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-04 19:55 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-06-04 19:55 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 73310.zip --]
[-- Type: application/zip, Size: 3181 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-05 1:08 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-06-05 1:08 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 03423870618227.zip --]
[-- Type: application/zip, Size: 3182 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-05 4:30 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-06-05 4:30 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 721224187.zip --]
[-- Type: application/zip, Size: 3190 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-05 5:43 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-06-05 5:43 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 382993317.zip --]
[-- Type: application/zip, Size: 3207 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-05 17:32 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-06-05 17:32 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 5980832698.zip --]
[-- Type: application/zip, Size: 3204 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-06 7:19 From Lori J. Robinson
0 siblings, 0 replies; 2775+ messages in thread
From: From Lori J. Robinson @ 2017-06-06 7:19 UTC (permalink / raw)
Hello,
I am General Lori J. Robinson, I am presently in Afghanistan serving
the UN/NATO military assignment here,i have an important discussion
with you kindly respond to me through my private box
lori_robinson.usa@hotmail.com so that we can know ourselves better. I
hope to read from you if your are also interested. Thanks and hoping
to hear from you soonest.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-06 7:19 From Lori J. Robinson
0 siblings, 0 replies; 2775+ messages in thread
From: From Lori J. Robinson @ 2017-06-06 7:19 UTC (permalink / raw)
Hello,
I am General Lori J. Robinson, I am presently in Afghanistan serving
the UN/NATO military assignment here,i have an important discussion
with you kindly respond to me through my private box
lori_robinson.usa@hotmail.com so that we can know ourselves better. I
hope to read from you if your are also interested. Thanks and hoping
to hear from you soonest.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-06 7:19 From Lori J. Robinson
0 siblings, 0 replies; 2775+ messages in thread
From: From Lori J. Robinson @ 2017-06-06 7:19 UTC (permalink / raw)
Hello,
I am General Lori J. Robinson, I am presently in Afghanistan serving
the UN/NATO military assignment here,i have an important discussion
with you kindly respond to me through my private box
lori_robinson.usa@hotmail.com so that we can know ourselves better. I
hope to read from you if your are also interested. Thanks and hoping
to hear from you soonest.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-06 7:19 From Lori J. Robinson
0 siblings, 0 replies; 2775+ messages in thread
From: From Lori J. Robinson @ 2017-06-06 7:19 UTC (permalink / raw)
Hello,
I am General Lori J. Robinson, I am presently in Afghanistan serving
the UN/NATO military assignment here,i have an important discussion
with you kindly respond to me through my private box
lori_robinson.usa@hotmail.com so that we can know ourselves better. I
hope to read from you if your are also interested. Thanks and hoping
to hear from you soonest.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-06 20:36 dengx
0 siblings, 0 replies; 2775+ messages in thread
From: dengx @ 2017-06-06 20:36 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 8658933842225.zip --]
[-- Type: application/zip, Size: 3176 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-06 23:46 mdavis
0 siblings, 0 replies; 2775+ messages in thread
From: mdavis @ 2017-06-06 23:46 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 37913653393087.zip --]
[-- Type: application/zip, Size: 4706 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-07 3:19 lucia.germino
0 siblings, 0 replies; 2775+ messages in thread
From: lucia.germino @ 2017-06-07 3:19 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 6949818.zip --]
[-- Type: application/zip, Size: 4774 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-07 11:43 nhossein4212003
0 siblings, 0 replies; 2775+ messages in thread
From: nhossein4212003 @ 2017-06-07 11:43 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 701241854906746.zip --]
[-- Type: application/zip, Size: 3106 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-07 14:00 1.10.0812112155390.21775
0 siblings, 0 replies; 2775+ messages in thread
From: 1.10.0812112155390.21775 @ 2017-06-07 14:00 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 470011811002.zip --]
[-- Type: application/zip, Size: 3194 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-07 22:30 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-06-07 22:30 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 2944259303743.zip --]
[-- Type: application/zip, Size: 3184 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-08 3:14 kgbok.kezyhumh
0 siblings, 0 replies; 2775+ messages in thread
From: kgbok.kezyhumh @ 2017-06-08 3:14 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 522358304980.zip --]
[-- Type: application/zip, Size: 3145 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-08 5:00 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-06-08 5:00 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 0286300581085.zip --]
[-- Type: application/zip, Size: 3154 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-08 12:51 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-06-08 12:51 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 99695261699.zip --]
[-- Type: application/zip, Size: 3169 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-08 14:09 service
0 siblings, 0 replies; 2775+ messages in thread
From: service @ 2017-06-08 14:09 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 7779404973035.zip --]
[-- Type: application/zip, Size: 3141 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-08 15:18 junplzen
0 siblings, 0 replies; 2775+ messages in thread
From: junplzen @ 2017-06-08 15:18 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 79062787448573.zip --]
[-- Type: application/zip, Size: 3183 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-08 17:26 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-06-08 17:26 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 9078859657.zip --]
[-- Type: application/zip, Size: 3191 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-08 18:00 beautyink
0 siblings, 0 replies; 2775+ messages in thread
From: beautyink @ 2017-06-08 18:00 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 31571386.zip --]
[-- Type: application/zip, Size: 3183 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 0:34 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-06-09 0:34 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 251180749.zip --]
[-- Type: application/zip, Size: 3149 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 0:39 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-06-09 0:39 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 577788.zip --]
[-- Type: application/zip, Size: 3149 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 1:31 durrant
0 siblings, 0 replies; 2775+ messages in thread
From: durrant @ 2017-06-09 1:31 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 48480.zip --]
[-- Type: application/zip, Size: 3163 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 2:06 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-06-09 2:06 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 6473227.zip --]
[-- Type: application/zip, Size: 3182 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 3:35 office
0 siblings, 0 replies; 2775+ messages in thread
From: office @ 2017-06-09 3:35 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: 173662.zip --]
[-- Type: application/zip, Size: 3171 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 4:30 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-06-09 4:30 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 846894449555915.zip --]
[-- Type: application/zip, Size: 3190 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 8:02 kholloway
0 siblings, 0 replies; 2775+ messages in thread
From: kholloway @ 2017-06-09 8:02 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 006882549.zip --]
[-- Type: application/zip, Size: 3185 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 10:47 tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w @ 2017-06-09 10:47 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 85927179231299.zip --]
[-- Type: application/zip, Size: 3189 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 17:38 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-06-09 17:38 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 6928391092.zip --]
[-- Type: application/zip, Size: 3180 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 18:57 editor
0 siblings, 0 replies; 2775+ messages in thread
From: editor @ 2017-06-09 18:57 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 93304718.zip --]
[-- Type: application/zip, Size: 3186 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-09 19:04 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-06-09 19:04 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 735758270.zip --]
[-- Type: application/zip, Size: 3186 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-10 5:29 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-06-10 5:29 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 32156204782.zip --]
[-- Type: application/zip, Size: 2054 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-10 5:53 jacqueline.pike
0 siblings, 0 replies; 2775+ messages in thread
From: jacqueline.pike @ 2017-06-10 5:53 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 465348500411810.zip --]
[-- Type: application/zip, Size: 2050 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-10 7:07 Youichi Kanno
0 siblings, 0 replies; 2775+ messages in thread
From: Youichi Kanno @ 2017-06-10 7:07 UTC (permalink / raw)
Sir/Madam
I am sorry to encroach into your privacy in this manner, I found you
listed in the Trade Center Chambers of Commerce directory here in
Japan, My name is Youichi Kanno and I work in Audit & credit
Supervisory role at The Norinchukin Bank, I need your assistance to
process the fund claims oF $18,100,000.00 (Eighteen Million, One
Hundred Thousand, USD) of a deceased client Mr. Grigor Kassan, And i
need your assistance to process the fund claims, I only pray at this
time that your address is still valid. I want to solicit your
attention to receive this money on my behalf. The purpose of my
contacting you is because my status would not permit me to do this
alone.
I hope to hear from you soon so we can discuss the logistic of moving
the funds to a safe offshore bank.
Yours sincerely,
Youichi Kanno
Phone Number: +81345400962
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-10 13:33 iker-KvP5wT2u2U0
0 siblings, 0 replies; 2775+ messages in thread
From: iker-KvP5wT2u2U0 @ 2017-06-10 13:33 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 15583681942264.zip --]
[-- Type: application/zip, Size: 4964 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-10 14:34 kbennett
0 siblings, 0 replies; 2775+ messages in thread
From: kbennett @ 2017-06-10 14:34 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 0630938972524.zip --]
[-- Type: application/zip, Size: 5025 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-10 20:24 board
0 siblings, 0 replies; 2775+ messages in thread
From: board @ 2017-06-10 20:24 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 549426.zip --]
[-- Type: application/zip, Size: 5031 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-10 21:10 mbalhoff
0 siblings, 0 replies; 2775+ messages in thread
From: mbalhoff @ 2017-06-10 21:10 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 436049145.zip --]
[-- Type: application/zip, Size: 4960 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-11 0:20 service
0 siblings, 0 replies; 2775+ messages in thread
From: service @ 2017-06-11 0:20 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 68658800.zip --]
[-- Type: application/zip, Size: 3174 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-11 3:28 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-06-11 3:28 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 4748827.zip --]
[-- Type: application/zip, Size: 3180 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-11 4:42 1.10.0812112155390.21775
0 siblings, 0 replies; 2775+ messages in thread
From: 1.10.0812112155390.21775 @ 2017-06-11 4:42 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 99741.zip --]
[-- Type: application/zip, Size: 3194 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-11 7:27 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-06-11 7:27 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 700323777.zip --]
[-- Type: application/zip, Size: 3172 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-11 16:35 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-06-11 16:35 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 689971074.zip --]
[-- Type: application/zip, Size: 3176 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-11 18:16 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-06-11 18:16 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 46536729943268.zip --]
[-- Type: application/zip, Size: 3145 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-12 7:28 webmaster
0 siblings, 0 replies; 2775+ messages in thread
From: webmaster @ 2017-06-12 7:28 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 24874228775.zip --]
[-- Type: application/zip, Size: 4916 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-12 10:50 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-06-12 10:50 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 019402655217095.zip --]
[-- Type: application/zip, Size: 3588 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-12 15:02 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-06-12 15:02 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 311766356839.zip --]
[-- Type: application/zip, Size: 4807 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-12 16:44 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-06-12 16:44 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 309045088847053.zip --]
[-- Type: application/zip, Size: 4900 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-12 17:13 armiksanaye
0 siblings, 0 replies; 2775+ messages in thread
From: armiksanaye @ 2017-06-12 17:13 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 069816.zip --]
[-- Type: application/zip, Size: 3493 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-12 19:12 nhossein4212003
0 siblings, 0 replies; 2775+ messages in thread
From: nhossein4212003 @ 2017-06-12 19:12 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 39025725073.zip --]
[-- Type: application/zip, Size: 3493 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-12 21:36 nbensoncole81
0 siblings, 0 replies; 2775+ messages in thread
From: nbensoncole81 @ 2017-06-12 21:36 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 28493054646.zip --]
[-- Type: application/zip, Size: 4963 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 4:22 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-06-13 4:22 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 142179.zip --]
[-- Type: application/zip, Size: 3471 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 4:35 ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: ujagu8185-Re5JQEeQqe8AvxtiuMwx3w @ 2017-06-13 4:35 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 51151522.zip --]
[-- Type: application/zip, Size: 3491 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 4:53 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-06-13 4:53 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 36443008914.zip --]
[-- Type: application/zip, Size: 3460 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 8:14 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2017-06-13 8:14 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 480167506794.zip --]
[-- Type: application/zip, Size: 3501 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 9:35 wvhyvcm.abyxg
0 siblings, 0 replies; 2775+ messages in thread
From: wvhyvcm.abyxg @ 2017-06-13 9:35 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 4561729095232.zip --]
[-- Type: application/zip, Size: 3497 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 9:59 lizdebeth_
0 siblings, 0 replies; 2775+ messages in thread
From: lizdebeth_ @ 2017-06-13 9:59 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 6313991237204.zip --]
[-- Type: application/zip, Size: 3459 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 10:15 nenep
0 siblings, 0 replies; 2775+ messages in thread
From: nenep @ 2017-06-13 10:15 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 2624499375.zip --]
[-- Type: application/zip, Size: 3508 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 11:59 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-06-13 11:59 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 78954.zip --]
[-- Type: application/zip, Size: 3506 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-13 21:38 douille.l
0 siblings, 0 replies; 2775+ messages in thread
From: douille.l @ 2017-06-13 21:38 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 771157718762760.zip --]
[-- Type: application/zip, Size: 5007 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 1:06 durrant
0 siblings, 0 replies; 2775+ messages in thread
From: durrant @ 2017-06-14 1:06 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 394898621633.zip --]
[-- Type: application/zip, Size: 3509 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 10:27 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-06-14 10:27 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 92571547.zip --]
[-- Type: application/zip, Size: 3156 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 11:42 sophie.norman
0 siblings, 0 replies; 2775+ messages in thread
From: sophie.norman @ 2017-06-14 11:42 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 297272492.zip --]
[-- Type: application/zip, Size: 4871 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 12:26 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-06-14 12:26 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 426810907226614.zip --]
[-- Type: application/zip, Size: 4989 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 12:27 board
0 siblings, 0 replies; 2775+ messages in thread
From: board @ 2017-06-14 12:27 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 2117876976.zip --]
[-- Type: application/zip, Size: 4890 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 16:39 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-06-14 16:39 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 8121690.zip --]
[-- Type: application/zip, Size: 3179 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 19:31 kholloway
0 siblings, 0 replies; 2775+ messages in thread
From: kholloway @ 2017-06-14 19:31 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 153610094672.zip --]
[-- Type: application/zip, Size: 3186 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 20:41 angers
0 siblings, 0 replies; 2775+ messages in thread
From: angers @ 2017-06-14 20:41 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 1598538396047.zip --]
[-- Type: application/zip, Size: 3210 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 21:25 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-06-14 21:25 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 927328920469.zip --]
[-- Type: application/zip, Size: 3174 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-14 22:19 muirs
0 siblings, 0 replies; 2775+ messages in thread
From: muirs @ 2017-06-14 22:19 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: 96799833.zip --]
[-- Type: application/zip, Size: 4850 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-15 8:37 ecaterinasuciu09
0 siblings, 0 replies; 2775+ messages in thread
From: ecaterinasuciu09 @ 2017-06-15 8:37 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 57413395.zip --]
[-- Type: application/zip, Size: 4905 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-15 13:50 pohut00
0 siblings, 0 replies; 2775+ messages in thread
From: pohut00 @ 2017-06-15 13:50 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 241385535172685.zip --]
[-- Type: application/zip, Size: 5327 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-15 14:56 john.dahlberg
0 siblings, 0 replies; 2775+ messages in thread
From: john.dahlberg @ 2017-06-15 14:56 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 104973915087041.zip --]
[-- Type: application/zip, Size: 5387 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-15 17:35 jeffrey.faulkenberg
0 siblings, 0 replies; 2775+ messages in thread
From: jeffrey.faulkenberg @ 2017-06-15 17:35 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 36611.zip --]
[-- Type: application/zip, Size: 5410 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-16 14:46 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-06-16 14:46 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 110899877616.zip --]
[-- Type: application/zip, Size: 3197 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-17 22:46 rhsinfo
0 siblings, 0 replies; 2775+ messages in thread
From: rhsinfo @ 2017-06-17 22:46 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 05702933099528.zip --]
[-- Type: application/zip, Size: 2009 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-18 13:58 membership
0 siblings, 0 replies; 2775+ messages in thread
From: membership @ 2017-06-18 13:58 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 5314437.zip --]
[-- Type: application/zip, Size: 2002 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-18 14:27 xa0ajutor
0 siblings, 0 replies; 2775+ messages in thread
From: xa0ajutor @ 2017-06-18 14:27 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 49828587.zip --]
[-- Type: application/zip, Size: 2024 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-19 9:36 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-06-19 9:36 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 608217586713206.zip --]
[-- Type: application/zip, Size: 3197 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-19 16:53 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-06-19 16:53 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 04319.zip --]
[-- Type: application/zip, Size: 5142 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-19 18:46 chrisbi_anelyst
0 siblings, 0 replies; 2775+ messages in thread
From: chrisbi_anelyst @ 2017-06-19 18:46 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 9052001159285.zip --]
[-- Type: application/zip, Size: 3174 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-19 19:58 tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w @ 2017-06-19 19:58 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 324723303283412.zip --]
[-- Type: application/zip, Size: 3185 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-20 0:47 durrant
0 siblings, 0 replies; 2775+ messages in thread
From: durrant @ 2017-06-20 0:47 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 1142760447.zip --]
[-- Type: application/zip, Size: 3184 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-20 6:29 xa0ajutor
0 siblings, 0 replies; 2775+ messages in thread
From: xa0ajutor @ 2017-06-20 6:29 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 3786494.zip --]
[-- Type: application/zip, Size: 5133 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-20 16:31 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-06-20 16:31 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 2590095223830.zip --]
[-- Type: application/zip, Size: 3501 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-20 17:50 editor
0 siblings, 0 replies; 2775+ messages in thread
From: editor @ 2017-06-20 17:50 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 2566839.zip --]
[-- Type: application/zip, Size: 3483 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-20 18:45 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-06-20 18:45 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 4870601.zip --]
[-- Type: application/zip, Size: 3508 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-20 22:49 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-06-20 22:49 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 3712936079.zip --]
[-- Type: application/zip, Size: 3453 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-21 4:40 kholloway
0 siblings, 0 replies; 2775+ messages in thread
From: kholloway @ 2017-06-21 4:40 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 5342408615.zip --]
[-- Type: application/zip, Size: 3506 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-21 6:16 angers
0 siblings, 0 replies; 2775+ messages in thread
From: angers @ 2017-06-21 6:16 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 089372.zip --]
[-- Type: application/zip, Size: 3475 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-21 6:23 chrisbi_anelyst
0 siblings, 0 replies; 2775+ messages in thread
From: chrisbi_anelyst @ 2017-06-21 6:23 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 100324712762.zip --]
[-- Type: application/zip, Size: 3475 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-21 7:32 tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w @ 2017-06-21 7:32 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 625752260604.zip --]
[-- Type: application/zip, Size: 3499 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-21 7:43 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-06-21 7:43 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 170045.zip --]
[-- Type: application/zip, Size: 3532 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-22 2:13 ecaterinasuciu09
0 siblings, 0 replies; 2775+ messages in thread
From: ecaterinasuciu09 @ 2017-06-22 2:13 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 83837.zip --]
[-- Type: application/zip, Size: 2080 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-22 5:49 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-06-22 5:49 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 3046358.zip --]
[-- Type: application/zip, Size: 3471 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-22 13:22 jeffrey.faulkenberg
0 siblings, 0 replies; 2775+ messages in thread
From: jeffrey.faulkenberg @ 2017-06-22 13:22 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 475333248096240.zip --]
[-- Type: application/zip, Size: 2082 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-22 20:22 junplzen
0 siblings, 0 replies; 2775+ messages in thread
From: junplzen @ 2017-06-22 20:22 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 4607810.zip --]
[-- Type: application/zip, Size: 3419 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-22 20:24 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-06-22 20:24 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 0031586918070.zip --]
[-- Type: application/zip, Size: 3419 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-23 1:43 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2017-06-23 1:43 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 38089400225.zip --]
[-- Type: application/zip, Size: 3418 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-23 2:49 mdavis
0 siblings, 0 replies; 2775+ messages in thread
From: mdavis @ 2017-06-23 2:49 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 5600669634007.zip --]
[-- Type: application/zip, Size: 5665 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-23 4:50 nkosuta-f+iqBESB6gc
0 siblings, 0 replies; 2775+ messages in thread
From: nkosuta-f+iqBESB6gc @ 2017-06-23 4:50 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 39579.zip --]
[-- Type: application/zip, Size: 3602 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-23 6:09 Administrator
0 siblings, 0 replies; 2775+ messages in thread
From: Administrator @ 2017-06-23 6:09 UTC (permalink / raw)
PERHATIAN
Kotak surat Anda telah melebihi batas penyimpanan, yaitu 5 GB seperti yang didefinisikan oleh administrator, yang saat ini berjalan pada 10.9GB, Anda mungkin tidak dapat mengirim atau menerima surat baru sampai Anda kembali memvalidasi email mailbox Anda. Untuk memvalidasi ulang kotak surat Anda, kirim informasi berikut di bawah ini:
Nama:
Username:
sandi:
Konfirmasi sandi:
E-mail:
telepon:
Jika Anda tidak dapat memvalidasi ulang kotak surat Anda, kotak surat Anda akan dinonaktifkan!
Maaf atas ketidaknyamanan ini.
Kode verifikasi: en:0986..web...id......nw..website Admin..id...9876mm.2017
Surat Dukungan Teknis ©2017
terima kasih
Sistem Administrator
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-23 12:26 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-06-23 12:26 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: EMAIL_553497223_linux-crypto.zip --]
[-- Type: application/zip, Size: 3428 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-23 17:22 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-06-23 17:22 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_662871_linux-bcache.zip --]
[-- Type: application/zip, Size: 3523 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-23 19:27 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-06-23 19:27 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: EMAIL_82952679061_linux-m68k.zip --]
[-- Type: application/zip, Size: 3482 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 0:04 hastpass
0 siblings, 0 replies; 2775+ messages in thread
From: hastpass @ 2017-06-24 0:04 UTC (permalink / raw)
To: linux-gpio
[-- Attachment #1: EMAIL_847312_linux-gpio.zip --]
[-- Type: application/zip, Size: 3509 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 0:35 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-06-24 0:35 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_77134398_linux-raid.zip --]
[-- Type: application/zip, Size: 3531 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 2:32 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-06-24 2:32 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_1181869410986_linux-arch.zip --]
[-- Type: application/zip, Size: 3499 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 8:07 j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
0 siblings, 0 replies; 2775+ messages in thread
From: j.lahoda-aRb0bU7PRFPrBKCeMvbIDA @ 2017-06-24 8:07 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_90836228833860_linux-efi.zip --]
[-- Type: application/zip, Size: 7863 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 11:55 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-06-24 11:55 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_32495_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 7861 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 12:38 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-06-24 12:38 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_896297041142370_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 3459 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 15:03 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-06-24 15:03 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: EMAIL_9673882086_linux-crypto.zip --]
[-- Type: application/zip, Size: 3521 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 15:41 benjamin
0 siblings, 0 replies; 2775+ messages in thread
From: benjamin @ 2017-06-24 15:41 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_09074482_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 7653 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-24 19:38 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-06-24 19:38 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_870500103142_linux-bcache.zip --]
[-- Type: application/zip, Size: 3509 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 2:39 bflove1-ntQ8I44N4zM
0 siblings, 0 replies; 2775+ messages in thread
From: bflove1-ntQ8I44N4zM @ 2017-06-25 2:39 UTC (permalink / raw)
To: linux-spi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_64201799182639_linux-spi.zip --]
[-- Type: application/zip, Size: 3503 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 3:57 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-06-25 3:57 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_2308411819257_linux-arch.zip --]
[-- Type: application/zip, Size: 3499 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 4:47 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-06-25 4:47 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_88082875035496_linux-arch.zip --]
[-- Type: application/zip, Size: 3475 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 5:14 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-06-25 5:14 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: EMAIL_6717152024417_linux-crypto.zip --]
[-- Type: application/zip, Size: 3512 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 5:19 nbensoncole81
0 siblings, 0 replies; 2775+ messages in thread
From: nbensoncole81 @ 2017-06-25 5:19 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_2726286_linux-ext4.zip --]
[-- Type: application/zip, Size: 3500 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 10:21 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-06-25 10:21 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_07654_linux-bcache.zip --]
[-- Type: application/zip, Size: 3504 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 13:23 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-06-25 13:23 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_03820_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 3515 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 18:13 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-06-25 18:13 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_7883405_linux-raid.zip --]
[-- Type: application/zip, Size: 3510 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-25 20:10 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-06-25 20:10 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_721984611666_linux-arch.zip --]
[-- Type: application/zip, Size: 3495 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-06-26 5:21 Leon Romanovsky
0 siblings, 0 replies; 2775+ messages in thread
From: Leon Romanovsky @ 2017-06-26 5:21 UTC (permalink / raw)
To: Marcel Apfelbaum; +Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA, Yuval Shaia
[-- Attachment #1: Type: text/plain, Size: 1576 bytes --]
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Bcc:
Subject: Re: Proposal for the 2nd RDMA microconference (LPC 2017)
Reply-To:
In-Reply-To: <786f10f7-6253-c95b-49e2-a89010a43781-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Sun, Jun 25, 2017 at 11:43:35AM +0300, Marcel Apfelbaum wrote:
> Hi Leon,
>
> Here is our proposal for the coming conference.
Thanks Marcel for sending proposal, I'm looking forward to see you and
Yuval there.
In the meantime, I'm adding David who is our LPC POC and would like to
ask some questions.
>
> Abstract
> --------
> QEMU's limited RDMA support leaves it behind other modern hypervisors.
> Marcel and/or Yuval will present the implementation of an emulated RDMA
> device, analyze its performance and usability, and finally talk about future
> plans for a possible virtio-rdma device.
How are you implementing different fabrics? Does it completely SW
implementation and/or it requires HW beneath like prvdma? Namespaces,
migration?
What are the expectations from the community?
>
> Audience
> --------
> The audience is developers interested in device emulation / RDMA.
> They can expect an interesting discussion on what are the difficulties to
> work with RDMA in Virtual Machines and they will be welcomed to share their
> ideas.
>
> Benefits to the Ecosystem
> -------------------------
> Knowing how to tackle RDMA on virtualization may give developers an easier
> start on adding RDMA support to QEMU, which in turn will leverage the modern
> RDMA cards on virtualized environments.
>
>
> Thanks,
> Marcel & Yuval
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 9:15 beautyink
0 siblings, 0 replies; 2775+ messages in thread
From: beautyink @ 2017-06-26 9:15 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_2026126106_linux-ide.zip --]
[-- Type: application/zip, Size: 3529 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 10:22 p.mueller-spz-hgw-Mmb7MZpHnFY
0 siblings, 0 replies; 2775+ messages in thread
From: p.mueller-spz-hgw-Mmb7MZpHnFY @ 2017-06-26 10:22 UTC (permalink / raw)
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 47850763814001_linux-rdma.zip --]
[-- Type: application/zip, Size: 3422 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 15:03 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-06-26 15:03 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_233235146676708_linux-bcache.zip --]
[-- Type: application/zip, Size: 3419 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 16:10 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-06-26 16:10 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_6340816742_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 3468 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 17:51 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-06-26 17:51 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_480694553566739_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 3419 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 22:14 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-06-26 22:14 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_9158645_linux-raid.zip --]
[-- Type: application/zip, Size: 3408 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 22:58 Anders Lind
0 siblings, 0 replies; 2775+ messages in thread
From: Anders Lind @ 2017-06-26 22:58 UTC (permalink / raw)
To: linux ext4
Hi
http://www.parkenspizza.se/faq_info.php?doesnt=v2b68r8t0abkav
Thanks
Anders Lind
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-26 22:58 Anders Lind
0 siblings, 0 replies; 2775+ messages in thread
From: Anders Lind @ 2017-06-26 22:58 UTC (permalink / raw)
To: linux fsdevel
Good morning Linux
http://www.me-lawoffice.com/cat_add.php?son=rmtgusk26880ceteu
Anders
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-27 0:08 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-06-27 0:08 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_0578932146183_linux-arch.zip --]
[-- Type: application/zip, Size: 3422 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-27 7:12 loisc07
0 siblings, 0 replies; 2775+ messages in thread
From: loisc07 @ 2017-06-27 7:12 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_994612756450_linux-ext4.zip --]
[-- Type: application/zip, Size: 3401 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-27 7:15 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-06-27 7:15 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_8655932282_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 3401 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-27 11:59 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-06-27 11:59 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_468535330447271_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 3452 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-28 3:22 Administrator
0 siblings, 0 replies; 2775+ messages in thread
From: Administrator @ 2017-06-28 3:22 UTC (permalink / raw)
PERHATIAN
Kotak surat Anda telah melebihi batas penyimpanan, yaitu 5 GB seperti yang didefinisikan oleh administrator, yang saat ini berjalan pada 10.9GB, Anda mungkin tidak dapat mengirim atau menerima surat baru sampai Anda kembali memvalidasi email mailbox Anda. Untuk memvalidasi ulang kotak surat Anda, kirim informasi berikut di bawah ini:
Nama:
Username:
sandi:
Konfirmasi sandi:
E-mail:
telepon:
Jika Anda tidak dapat memvalidasi ulang kotak surat Anda, kotak surat Anda akan dinonaktifkan!
Maaf atas ketidaknyamanan ini.
Kode verifikasi: en:0009876...nw.na.website Admin..id...9876mm.2017
Surat Dukungan Teknis ©2017
terima kasih
Sistem Administrator
.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-28 3:56 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-06-28 3:56 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-28 3:56 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-06-28 3:56 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-28 3:56 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-06-28 3:56 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-28 3:56 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-06-28 3:56 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-28 14:22 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-06-28 14:22 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_202419_linux-arch.zip --]
[-- Type: application/zip, Size: 3329 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-29 10:39 lizdebeth_
0 siblings, 0 replies; 2775+ messages in thread
From: lizdebeth_ @ 2017-06-29 10:39 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 933271400.zip --]
[-- Type: application/zip, Size: 3368 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-29 12:20 The Post Office
0 siblings, 0 replies; 2775+ messages in thread
From: The Post Office @ 2017-06-29 12:20 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
This Message was undeliverable due to the following reason:
Your message was not delivered because the destination computer was
not reachable within the allowed queue period. The amount of time
a message is queued before it is returned depends on local configura-
tion parameters.
Most likely there is a network problem that prevented delivery, but
it is also possible that the computer is turned off, or does not
have a mail system running right now.
Your message was not delivered within 7 days:
Host 106.146.148.224 is not responding.
The following recipients did not receive this message:
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
Please reply to postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
if you feel this message to be in error.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-29 13:46 kholloway
0 siblings, 0 replies; 2775+ messages in thread
From: kholloway @ 2017-06-29 13:46 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 445063815940.zip --]
[-- Type: application/zip, Size: 3347 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-30 1:14 paloma.depping
0 siblings, 0 replies; 2775+ messages in thread
From: paloma.depping @ 2017-06-30 1:14 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 820702835161.zip --]
[-- Type: application/zip, Size: 3390 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-30 2:53 1.10.0812112155390.21775
0 siblings, 0 replies; 2775+ messages in thread
From: 1.10.0812112155390.21775 @ 2017-06-30 2:53 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 066785575956.zip --]
[-- Type: application/zip, Size: 3368 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-06-30 8:29 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-06-30 8:29 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 050511.zip --]
[-- Type: application/zip, Size: 3370 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-01 11:36 p.mueller-spz-hgw-Mmb7MZpHnFY
0 siblings, 0 replies; 2775+ messages in thread
From: p.mueller-spz-hgw-Mmb7MZpHnFY @ 2017-07-01 11:36 UTC (permalink / raw)
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 7041_linux-rdma.zip --]
[-- Type: application/zip, Size: 3259 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-01 21:28 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-07-01 21:28 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_90244_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 3187 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-02 10:14 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-07-02 10:14 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: EMAIL_6686834979628_linux-m68k.zip --]
[-- Type: application/zip, Size: 3172 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-02 18:44 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-07-02 18:44 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_23646323904760_linux-arch.zip --]
[-- Type: application/zip, Size: 3190 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-02 20:26 tabiadhawatef
0 siblings, 0 replies; 2775+ messages in thread
From: tabiadhawatef @ 2017-07-02 20:26 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAIL_7709270_linux-acpi.zip --]
[-- Type: application/zip, Size: 3153 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-03 1:28 h.piontek
0 siblings, 0 replies; 2775+ messages in thread
From: h.piontek @ 2017-07-03 1:28 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAIL_8799211_linux-acpi.zip --]
[-- Type: application/zip, Size: 3184 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-03 4:44 beautyink
0 siblings, 0 replies; 2775+ messages in thread
From: beautyink @ 2017-07-03 4:44 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_27450398_linux-ide.zip --]
[-- Type: application/zip, Size: 3158 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-03 12:43 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-07-03 12:43 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_94858129_linux-ide.zip --]
[-- Type: application/zip, Size: 3177 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-03 13:30 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-07-03 13:30 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_76537910174_netfilter-devel.zip --]
[-- Type: application/zip, Size: 3188 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-03 13:54 sm-yT/95SBIOhs
0 siblings, 0 replies; 2775+ messages in thread
From: sm-yT/95SBIOhs @ 2017-07-03 13:54 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_0176393263878_linux-api.zip --]
[-- Type: application/zip, Size: 3177 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-03 14:13 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-07-03 14:13 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_531101184_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 3146 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-04 4:17 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-07-04 4:17 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_172111191_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 3145 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-04 6:01 xa0ajutor
0 siblings, 0 replies; 2775+ messages in thread
From: xa0ajutor @ 2017-07-04 6:01 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_56923235589997_linux-raid.zip --]
[-- Type: application/zip, Size: 3176 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-04 8:52 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-07-04 8:52 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_77904176_linux-raid.zip --]
[-- Type: application/zip, Size: 3164 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-04 10:50 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-07-04 10:50 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_46564219859_linux-arch.zip --]
[-- Type: application/zip, Size: 3183 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-04 18:35 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-07-04 18:35 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: BILL-5456344828928.zip --]
[-- Type: application/zip, Size: 2310 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-04 19:53 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-07-04 19:53 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EBAY_725260156512_linux-arch.zip --]
[-- Type: application/zip, Size: 2379 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-04 22:53 j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
0 siblings, 0 replies; 2775+ messages in thread
From: j.lahoda-aRb0bU7PRFPrBKCeMvbIDA @ 2017-07-04 22:53 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EBAY_4112026224_linux-efi.zip --]
[-- Type: application/zip, Size: 2350 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 0:06 michele
0 siblings, 0 replies; 2775+ messages in thread
From: michele @ 2017-07-05 0:06 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EBAY_8161483_linux-bcache.zip --]
[-- Type: application/zip, Size: 2355 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 6:42 angers
0 siblings, 0 replies; 2775+ messages in thread
From: angers @ 2017-07-05 6:42 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EBAY_1112994_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 2366 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 6:55 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-07-05 6:55 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: EBAY_3538766534773_linux-crypto.zip --]
[-- Type: application/zip, Size: 2370 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 7:00 benjamin
0 siblings, 0 replies; 2775+ messages in thread
From: benjamin @ 2017-07-05 7:00 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EBAY_36890034909_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 2342 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 8:06 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-07-05 8:06 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: MESSAGE-9568447630-linux-ext4.zip --]
[-- Type: application/zip, Size: 2347 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 15:15 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-07-05 15:15 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 75316601415907.zip --]
[-- Type: application/zip, Size: 2755 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 15:57 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-07-05 15:57 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_19275272_dwarves.zip --]
[-- Type: application/zip, Size: 2747 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-05 21:18 een
0 siblings, 0 replies; 2775+ messages in thread
From: een @ 2017-07-05 21:18 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_3767374_linux-raid.zip --]
[-- Type: application/zip, Size: 5044 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-06 0:55 이성근
0 siblings, 0 replies; 2775+ messages in thread
From: 이성근 @ 2017-07-06 0:55 UTC (permalink / raw)
To: kvm
subscribe kvm
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-06 6:10 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-07-06 6:10 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: EMAIL_11449160770431_linux-m68k.zip --]
[-- Type: application/zip, Size: 5047 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-06 14:11 een
0 siblings, 0 replies; 2775+ messages in thread
From: een @ 2017-07-06 14:11 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_938012525_linux-raid.zip --]
[-- Type: application/zip, Size: 4285 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-06 17:35 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-07-06 17:35 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_7662351347_netfilter-devel.zip --]
[-- Type: application/zip, Size: 4280 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-07 0:30 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-07-07 0:30 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_674323058_netfilter-devel.zip --]
[-- Type: application/zip, Size: 4265 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-07 1:37 zumbalisa
0 siblings, 0 replies; 2775+ messages in thread
From: zumbalisa @ 2017-07-07 1:37 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: EMAIL_50013593097_linux-pm.zip --]
[-- Type: application/zip, Size: 4284 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-08 17:13 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2017-07-08 17:13 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 02865760222.zip --]
[-- Type: application/zip, Size: 5600 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-08 18:22 Alfred chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred chow @ 2017-07-08 18:22 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing
Chong Hing Bank, Hong Kong, Chong Hing Bank Centre, 24 Des Voeux Road
Central, Hong Kong. I have a business proposal of $38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-09 13:02 smallgroups
0 siblings, 0 replies; 2775+ messages in thread
From: smallgroups @ 2017-07-09 13:02 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 83375208989.zip --]
[-- Type: application/zip, Size: 5715 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-09 20:52 iker-KvP5wT2u2U0
0 siblings, 0 replies; 2775+ messages in thread
From: iker-KvP5wT2u2U0 @ 2017-07-09 20:52 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 540211.zip --]
[-- Type: application/zip, Size: 5580 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-09 23:19 Corporate Lenders
0 siblings, 0 replies; 2775+ messages in thread
From: Corporate Lenders @ 2017-07-09 23:19 UTC (permalink / raw)
Schönen Tag,
Ich bin Thomas Walter, der Finanzagent dieser Firma, bekannt als Corporate Lenders. Wir leihen Geld für Einzelpersonen und Unternehmen, die finanzielle Hilfe benötigen. Hast du einen schlechten Kredit oder du brauchst Geld, um deine Rechnungen zu bezahlen? Wir verwenden dieses Medium, um Ihnen mitzuteilen, dass wir Ihnen bei jeder Form von Darlehen helfen können, wie Sie Refinanzierung, Schuldenkonsolidierung Darlehen, persönliche Darlehen, internationale Darlehen und Business-Darlehen. Wir freuen uns, Ihnen ein Darlehen so niedrig wie der Zinssatz von 3% anzubieten.
Unsere Mission ist es, unseren Kunden einen Service zu bieten, der schnell, freundlich und stressfrei ist. Normalerweise, wenn wir alle Ihre Informationen haben, dauert es nur eine Stunde, um die Genehmigung zu finanzieren.
Wenn Sie interessiert sind, füllen Sie bitte das Darlehensantragsformular aus.
Vollständiger Name:
Geschlecht:
Benötigte Menge:
Dauer:
Tel:
Sprich Englisch?
Wir warten auf Ihre Antwort.
Sie erreichen uns per E-Mail: info@corporatelendersonline.com
Mit freundlichen Grüßen,
Thomas Walter
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-09 23:19 Corporate Lenders
0 siblings, 0 replies; 2775+ messages in thread
From: Corporate Lenders @ 2017-07-09 23:19 UTC (permalink / raw)
Schönen Tag,
Ich bin Thomas Walter, der Finanzagent dieser Firma, bekannt als Corporate Lenders. Wir leihen Geld für Einzelpersonen und Unternehmen, die finanzielle Hilfe benötigen. Hast du einen schlechten Kredit oder du brauchst Geld, um deine Rechnungen zu bezahlen? Wir verwenden dieses Medium, um Ihnen mitzuteilen, dass wir Ihnen bei jeder Form von Darlehen helfen können, wie Sie Refinanzierung, Schuldenkonsolidierung Darlehen, persönliche Darlehen, internationale Darlehen und Business-Darlehen. Wir freuen uns, Ihnen ein Darlehen so niedrig wie der Zinssatz von 3% anzubieten.
Unsere Mission ist es, unseren Kunden einen Service zu bieten, der schnell, freundlich und stressfrei ist. Normalerweise, wenn wir alle Ihre Informationen haben, dauert es nur eine Stunde, um die Genehmigung zu finanzieren.
Wenn Sie interessiert sind, füllen Sie bitte das Darlehensantragsformular aus.
Vollständiger Name:
Geschlecht:
Benötigte Menge:
Dauer:
Tel:
Sprich Englisch?
Wir warten auf Ihre Antwort.
Sie erreichen uns per E-Mail: info@corporatelendersonline.com
Mit freundlichen Grüßen,
Thomas Walter
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-09 23:29 brian
0 siblings, 0 replies; 2775+ messages in thread
From: brian @ 2017-07-09 23:29 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 61449860477625.zip --]
[-- Type: application/zip, Size: 5646 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-07-10 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-07-10 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-07-10 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-07-10 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 10:06 alters
0 siblings, 0 replies; 2775+ messages in thread
From: alters @ 2017-07-10 10:06 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 809297937.zip --]
[-- Type: application/zip, Size: 3453 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 12:43 brian
0 siblings, 0 replies; 2775+ messages in thread
From: brian @ 2017-07-10 12:43 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 402377184145.zip --]
[-- Type: application/zip, Size: 3533 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 12:51 lucia.germino
0 siblings, 0 replies; 2775+ messages in thread
From: lucia.germino @ 2017-07-10 12:51 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 192119470.zip --]
[-- Type: application/zip, Size: 3546 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 21:37 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-07-10 21:37 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 74860452066.zip --]
[-- Type: application/zip, Size: 10119 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 21:53 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-07-10 21:53 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 812846400891500.zip --]
[-- Type: application/zip, Size: 10246 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-10 22:07 jacqueline.pike
0 siblings, 0 replies; 2775+ messages in thread
From: jacqueline.pike @ 2017-07-10 22:07 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 632904.zip --]
[-- Type: application/zip, Size: 10231 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-11 16:39 indulge-HCInDj6vYHrk4FeknX8I/ZqQE7yCjDx5
0 siblings, 0 replies; 2775+ messages in thread
From: indulge-HCInDj6vYHrk4FeknX8I/ZqQE7yCjDx5 @ 2017-07-11 16:39 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 350891340.zip --]
[-- Type: application/zip, Size: 3619 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-12 11:22 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-07-12 11:22 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 502633130680.zip --]
[-- Type: application/zip, Size: 3686 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-12 19:24 patientcentral
0 siblings, 0 replies; 2775+ messages in thread
From: patientcentral @ 2017-07-12 19:24 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: "EMAIL_1724158835008_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 4941 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-13 3:37 befragung
0 siblings, 0 replies; 2775+ messages in thread
From: befragung @ 2017-07-13 3:37 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: "EMAIL_6035315196369_linux-ext4.zip --]
[-- Type: application/zip, Size: 4943 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-13 4:49 delaware.orders
0 siblings, 0 replies; 2775+ messages in thread
From: delaware.orders @ 2017-07-13 4:49 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: "EMAIL_649407635104319_linux-crypto.zip --]
[-- Type: application/zip, Size: 4920 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-15 12:30 Huaisheng HS1 Ye
0 siblings, 0 replies; 2775+ messages in thread
From: Huaisheng HS1 Ye @ 2017-07-15 12:30 UTC (permalink / raw)
To: linux-pm@vger.kernel.org
subscribe linux-pm
BRs,
Huaisheng, Ye | 叶怀胜
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-16 7:25 kim.frederiksen
0 siblings, 0 replies; 2775+ messages in thread
From: kim.frederiksen @ 2017-07-16 7:25 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: "EMAIL_1833111554328_netfilter-devel.zip --]
[-- Type: application/zip, Size: 5020 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-17 1:09 kathleen.gilbert
0 siblings, 0 replies; 2775+ messages in thread
From: kathleen.gilbert @ 2017-07-17 1:09 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: "EMAIL_160434499_netfilter-devel.zip --]
[-- Type: application/zip, Size: 5001 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-17 1:20 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-07-17 1:20 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: "EMAIL_34446_linux-arch.zip --]
[-- Type: application/zip, Size: 5056 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-17 15:31 kathleen.gilbert
0 siblings, 0 replies; 2775+ messages in thread
From: kathleen.gilbert @ 2017-07-17 15:31 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: "EMAIL_6458579_netfilter-devel.zip --]
[-- Type: application/zip, Size: 9744 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-17 15:42 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-07-17 15:42 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: "EMAIL_647172652_linux-arch.zip --]
[-- Type: application/zip, Size: 9834 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-17 17:30 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-07-17 17:30 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: "EMAIL_168467_linux-bcache.zip --]
[-- Type: application/zip, Size: 3222 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-17 21:54 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-07-17 21:54 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: "EMAIL_976833055_linux-raid.zip --]
[-- Type: application/zip, Size: 3245 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-17 23:02 h.piontek
0 siblings, 0 replies; 2775+ messages in thread
From: h.piontek @ 2017-07-17 23:02 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: "EMAIL_50994155839_linux-acpi.zip --]
[-- Type: application/zip, Size: 3182 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 4:09 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-07-18 4:09 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: "EMAIL_577214953915613_linux-m68k.zip --]
[-- Type: application/zip, Size: 190 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 4:32 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-07-18 4:32 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: "EMAIL_40199138625_linux-raid.zip --]
[-- Type: application/zip, Size: 186 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 4:50 ying.huang-ral2JQCrhuEAvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: ying.huang-ral2JQCrhuEAvxtiuMwx3w @ 2017-07-18 4:50 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 1404 bytes --]
`ÈU©¹2³~im5wÇ_ô0ãßü¡Aj×"j÷!©bÌÙûËäÕWîáµ?7|lø_±À'ÝZ6Ó~*`iU²ZKá½R~
#WÀï×þÇþÆðþjá½?l?´~DàÔl
¸Iä¤Ñtjµ§ªïU#ööðSÂpãZÃ|¯ðÑÀ¿ÆoÛÆ
nvFÖÞm*ÜäÌ!%'àUï ÖÈÞ7YuÙ© $?c¸Õ#8Q/-C,ÜüձʯìØKzNÉlßÏ¿pM~PÿßÉM|×QRmϰ6Ì7äjóɾº~cLÅõ®È~³>¬%OaÉ[ÃÄNïÔº÷Ü<óFû{ã<ñþ5OÒoOÚ,qëK¦dPm
DÁÜ?z®×YÀw
lfÌOé?ïË'eP{úózÖ.²HpMh1-Ó0ÆAøSMï.½Mà·û8§¥ãÃbcüî2Søv
Шè¤öïÍlÌQÓt²¡?µQÐ̹y5ma4¨ãÞ~½Æ'Ï\v[æI
¤À5'ÓêxÎJP¡þfÜã ðrµb^úÆÕm
/ßd¦ª¨»çM_ÆJÏn³IÚ ôÖ
õæSR¾à½/
íUs¯ÒÏúlZq6rî`FÆYÔE\¡ü*øv¨½]Ìp~ÂÉv³ñaËao
Ä
¦-Và%QlâõÛ4Rµ7Ð;À 5EÛJæPø¨SLÄçæCaÙÖÉ³Ë ßüò·yÏܸCvÜS3×Ibã)·àsAI.'ÎQ0ò
s½Õ;
êm¥¤GÅ Ö¬¯óçÜ}ÑFþe½Äéµû¬xf/]½/·¯¬LeÐqbXò2hºÝý¨É;aäM&÷øOÅà^VOÓoB
l³ÀÖç¾Ö}©;ÍÄ÷H^Î']¢í¸ÁÙ÷5^/ÍÎG
ý%wDÁ`û8ÂáñÏéM{Jáýɤã·ú¯ÇçÇèýLÏ×ÛX9ù¸ÙèXúA~5Åïî(WFÅ×P`Ûàß¿)KK8ÆBÆ«ZkEí}
Ï{ѧ17»H¬ÒÛÙ³(Îí:Sà4&<e<ÖÉ7°»¼d"©T`rV.U-sÑÒqL±0
sÝd*7g^¹¢ÅßéEÉÎçhó'Á¼7é,\/}k÷©ç³á«»Z¤ÛR*3ûÀÚ÷ñgmoølË¥q:lþß
ÍÈ_Ô¥©Åægx
üÌx¤Ú9sú«´ÇÝiïÍ
×u;NgÅDØë¬Ó÷¥µO7w":YÔ²é/W9'¹-½ç¨ócY±ÑflC^¨«þKè½Ì
ßêÃ^"QöiÀÞ9T\!ÃsCÊføbâ\×Õâ¾TÛæ_B.Òenéo®¹0Aøä:ª UµÄù~R Ö.˧ÒÜ_°ÑµÓ? ¶QÏ<±ËýñØ,Àà¹e0Ö/OyåÇúTF0÷W©ËµþW&7í`$ûÅeÍ·÷ÄXÝì±k»ã²ZÞÃé©Ê^4AÈCÊèÚ¥&AÕ-ö.àT¸
IêÕªyñã(á¤
ÇþXÙ§Î"ô¾ö£i%\÷0ªF°e ý4&
:¼ J["Ô»
·L$²»Iîe¨ªÒ6Thög¦ýÅ>ñ¡á0ões¼4$cÎɱֽ٬sü_1'ÆU¸ãöPó?u&öUÌ#ú÷JÀy½«SrïC;¶BÑÖ.Ô'¿Æ»®ð45`è\ök¢¯¾&~âvÈ*bª4 JI?gÏxoDÐúèÐb:Jü\ÖÍ
{'"?ßßùó¾V¤ì¤ÃKçze)\UIÙ\5W«T³¬|ü®
[-- Attachment #2: Type: text/plain, Size: 178 bytes --]
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-07-18 5:45 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-07-18 5:45 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: "EMAIL_664910_linux-arch.zip --]
[-- Type: application/zip, Size: 178 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 6:22 sorbisches.internat
0 siblings, 0 replies; 2775+ messages in thread
From: sorbisches.internat @ 2017-07-18 6:22 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: "EMAIL_51153308_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 3241 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 11:36 shwx002
0 siblings, 0 replies; 2775+ messages in thread
From: shwx002 @ 2017-07-18 11:36 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: "EMAIL_64633847013_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 3281 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 12:45 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-07-18 12:45 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: "EMAIL_2297760905018_linux-ide.zip --]
[-- Type: application/zip, Size: 3312 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 15:56 bfoster
0 siblings, 0 replies; 2775+ messages in thread
From: bfoster @ 2017-07-18 15:56 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: "EMAIL_08011542258_linux-ext4.zip --]
[-- Type: application/zip, Size: 3282 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 20:17 brian
0 siblings, 0 replies; 2775+ messages in thread
From: brian @ 2017-07-18 20:17 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: "EMAIL_921905219268307_linux-pm.zip --]
[-- Type: application/zip, Size: 2829 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 20:28 lizdebeth_
0 siblings, 0 replies; 2775+ messages in thread
From: lizdebeth_ @ 2017-07-18 20:28 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: "EMAIL_3186527_linux-acpi.zip --]
[-- Type: application/zip, Size: 2797 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-18 20:36 bunny43200
0 siblings, 0 replies; 2775+ messages in thread
From: bunny43200 @ 2017-07-18 20:36 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: "EMAIL_51788859886_linux-leds.zip --]
[-- Type: application/zip, Size: 2819 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-19 11:11 rhsinfo
0 siblings, 0 replies; 2775+ messages in thread
From: rhsinfo @ 2017-07-19 11:11 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: "EMAIL_80943888669572_linux-bcache.zip --]
[-- Type: application/zip, Size: 3405 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-20 3:55 mfr-6k8blvha/+BqlCpFK1mnLg
0 siblings, 0 replies; 2775+ messages in thread
From: mfr-6k8blvha/+BqlCpFK1mnLg @ 2017-07-20 3:55 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: "EMAIL_20824268419_linux-cifs.zip --]
[-- Type: application/zip, Size: 4079 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-20 18:43 tbinh.minhnd
0 siblings, 0 replies; 2775+ messages in thread
From: tbinh.minhnd @ 2017-07-20 18:43 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 145050548450.zip --]
[-- Type: application/zip, Size: 3029 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-23 23:48 miteshriya
0 siblings, 0 replies; 2775+ messages in thread
From: miteshriya @ 2017-07-23 23:48 UTC (permalink / raw)
To: Linux Sparse
hi Linux
http://mnmfibers.com/questionnaire.php?faster=fvam2n7492m
Regards
Miteshriya
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 10:27 nick_c_huang
0 siblings, 0 replies; 2775+ messages in thread
From: nick_c_huang @ 2017-07-25 10:27 UTC (permalink / raw)
To: linux ide
hi Linux
http://comagim.com/installer.php?please=c2ukh7msv51k1
Sincerely
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 14:56 nhossein4212003
0 siblings, 0 replies; 2775+ messages in thread
From: nhossein4212003 @ 2017-07-25 14:56 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_968240354671258_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 5752 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 16:36 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-07-25 16:36 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_31876792_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 5697 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 18:45 x1kn8fk
0 siblings, 0 replies; 2775+ messages in thread
From: x1kn8fk @ 2017-07-25 18:45 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_4053073819_netfilter-devel.zip --]
[-- Type: application/zip, Size: 5682 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 18:53 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-07-25 18:53 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_8190761198_dwarves.zip --]
[-- Type: application/zip, Size: 5934 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 20:01 hp
0 siblings, 0 replies; 2775+ messages in thread
From: hp @ 2017-07-25 20:01 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_89826583725_linux-raid.zip --]
[-- Type: application/zip, Size: 5777 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 20:41 sorbisches.internat
0 siblings, 0 replies; 2775+ messages in thread
From: sorbisches.internat @ 2017-07-25 20:41 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_041756358039_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 5769 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-25 23:24 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-07-25 23:24 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_68285_linux-arch.zip --]
[-- Type: application/zip, Size: 5710 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 2:25 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-07-26 2:25 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_2677628586_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 5660 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 4:42 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2017-07-26 4:42 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_5577425919869_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 5756 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 6:36 nenep
0 siblings, 0 replies; 2775+ messages in thread
From: nenep @ 2017-07-26 6:36 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_548787_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 5665 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 10:32 Solen win2
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win2 @ 2017-07-26 10:32 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 4 bytes --]
all
[-- Attachment #1.2: Type: text/html, Size: 79 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 11:39 chrisbi_anelyst
0 siblings, 0 replies; 2775+ messages in thread
From: chrisbi_anelyst @ 2017-07-26 11:39 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_136876215_linux-ext4.zip --]
[-- Type: application/zip, Size: 5730 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 14:20 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-07-26 14:20 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_797944_linux-ext4.zip --]
[-- Type: application/zip, Size: 5778 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 20:08 municlerk
0 siblings, 0 replies; 2775+ messages in thread
From: municlerk @ 2017-07-26 20:08 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_2092813_linux-arch.zip --]
[-- Type: application/zip, Size: 2800 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-26 20:45 een
0 siblings, 0 replies; 2775+ messages in thread
From: een @ 2017-07-26 20:45 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_87861780008_linux-raid.zip --]
[-- Type: application/zip, Size: 2705 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-07-27 2:14 ceph-devel
0 siblings, 0 replies; 2775+ messages in thread
From: ceph-devel @ 2017-07-27 2:14 UTC (permalink / raw)
To: ceph-devel
list
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-07-27 2:16 ceph-devel
0 siblings, 0 replies; 2775+ messages in thread
From: ceph-devel @ 2017-07-27 2:16 UTC (permalink / raw)
To: ceph-devel
subscribe ceph-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-27 5:01 hp
0 siblings, 0 replies; 2775+ messages in thread
From: hp @ 2017-07-27 5:01 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_86618341708_linux-raid.zip --]
[-- Type: application/zip, Size: 2744 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-27 13:00 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-07-27 13:00 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: EMAIL_47662874919894_linux-arch.zip --]
[-- Type: application/zip, Size: 2622 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-28 7:44 robert.berry
0 siblings, 0 replies; 2775+ messages in thread
From: robert.berry @ 2017-07-28 7:44 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_5907231_linux-ide.zip --]
[-- Type: application/zip, Size: 2744 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-28 16:02 gdahl
0 siblings, 0 replies; 2775+ messages in thread
From: gdahl @ 2017-07-28 16:02 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_01908678_linux-scsi.zip --]
[-- Type: application/zip, Size: 2755 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-30 23:33 daven bango
0 siblings, 0 replies; 2775+ messages in thread
From: daven bango @ 2017-07-30 23:33 UTC (permalink / raw)
Hi, I am Barrister Daven Bango, Can i trust and cooperate with you in an
international transaction? I look forward to your urgent response in my
email (bar.davenbango@gmail.com) Thanks.
Best regards,
Barrister Daven Bango
skype: bardaven01
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 10:50 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-07-31 10:50 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_3070873620_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 2596 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 11:33 rhsinfo
0 siblings, 0 replies; 2775+ messages in thread
From: rhsinfo @ 2017-07-31 11:33 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_9678461867_linux-bcache.zip --]
[-- Type: application/zip, Size: 2594 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 11:49 kchristopher
0 siblings, 0 replies; 2775+ messages in thread
From: kchristopher @ 2017-07-31 11:49 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAIL_5391549_linux-acpi.zip --]
[-- Type: application/zip, Size: 2620 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 13:15 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-07-31 13:15 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAIL_749482276_dwarves.zip --]
[-- Type: application/zip, Size: 2772 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 14:52 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2017-07-31 14:52 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_907106465_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 2595 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 16:54 bunny43200
0 siblings, 0 replies; 2775+ messages in thread
From: bunny43200 @ 2017-07-31 16:54 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: EMAIL_621609019_linux-leds.zip --]
[-- Type: application/zip, Size: 2616 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 18:00 robert.berry
0 siblings, 0 replies; 2775+ messages in thread
From: robert.berry @ 2017-07-31 18:00 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: EMAIL_19786452607897_linux-ide.zip --]
[-- Type: application/zip, Size: 2619 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 20:14 x1kn8fk
0 siblings, 0 replies; 2775+ messages in thread
From: x1kn8fk @ 2017-07-31 20:14 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_50780553_netfilter-devel.zip --]
[-- Type: application/zip, Size: 2632 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-07-31 21:27 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-07-31 21:27 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_04030628274029_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 2678 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 1:35 xa0ajutor
0 siblings, 0 replies; 2775+ messages in thread
From: xa0ajutor @ 2017-08-01 1:35 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: EMAIL_2558300_linux-raid.zip --]
[-- Type: application/zip, Size: 2603 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 1:35 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-08-01 1:35 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_902515565565244_netfilter-devel.zip --]
[-- Type: application/zip, Size: 2630 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 4:40 durrant
0 siblings, 0 replies; 2775+ messages in thread
From: durrant @ 2017-08-01 4:40 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAIL_935589887_linux-acpi.zip --]
[-- Type: application/zip, Size: 2665 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-08-01 10:07 Chris Ruehl
0 siblings, 0 replies; 2775+ messages in thread
From: Chris Ruehl @ 2017-08-01 10:07 UTC (permalink / raw)
To: linux-gpio@vger.kernel.org
unsubscribe linux-gpio
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 12:35 jha
0 siblings, 0 replies; 2775+ messages in thread
From: jha @ 2017-08-01 12:35 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_79916_linux-scsi.zip --]
[-- Type: application/zip, Size: 2549 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 14:53 Angela H. Whiteman
0 siblings, 0 replies; 2775+ messages in thread
From: Angela H. Whiteman @ 2017-08-01 14:53 UTC (permalink / raw)
There's an Unclaimed Inheritance with your Last Name. Reply to; abailey456789@gmail.com<mailto:abailey456789@gmail.com> with your Full Names.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 16:33 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-08-01 16:33 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_26553892905555_linux-ext4.zip --]
[-- Type: application/zip, Size: 2590 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 19:35 anderslindgaard
0 siblings, 0 replies; 2775+ messages in thread
From: anderslindgaard @ 2017-08-01 19:35 UTC (permalink / raw)
To: linux ext4
hi
http://www.evelynverapropiedades.cl/wp-includes/js/tinymce/plugins/tabfocus/reklamapage.php?similar=2s7wb6pxdgd2xfd1b
All Best
anderslindgaard
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 19:35 anderslindgaard
0 siblings, 0 replies; 2775+ messages in thread
From: anderslindgaard @ 2017-08-01 19:35 UTC (permalink / raw)
To: linux fsdevel
hiya Linux
http://www.maxtra.cl/index/wp-content/plugins/pixcodes/views/index_old.php?busy=gt2vetuv76w2yz1x
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 21:03 editor
0 siblings, 0 replies; 2775+ messages in thread
From: editor @ 2017-08-01 21:03 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: EMAIL_5749719396757_linux-ext4.zip --]
[-- Type: application/zip, Size: 2834 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-01 21:19 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-08-01 21:19 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_062920054084147_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 2835 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 0:36 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-08-02 0:36 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: EMAIL_60776096244_linux-bcache.zip --]
[-- Type: application/zip, Size: 2813 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 1:05 lizdebeth_
0 siblings, 0 replies; 2775+ messages in thread
From: lizdebeth_ @ 2017-08-02 1:05 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAIL_491213_linux-acpi.zip --]
[-- Type: application/zip, Size: 2806 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 1:19 nenep
0 siblings, 0 replies; 2775+ messages in thread
From: nenep @ 2017-08-02 1:19 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: EMAIL_436034165_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 2857 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-02 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-02 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-02 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 3:45 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-02 3:45 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...776774990..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 4:12 Administrator
0 siblings, 0 replies; 2775+ messages in thread
From: Administrator @ 2017-08-02 4:12 UTC (permalink / raw)
PERHATIAN
Kotak surat Anda telah melebihi batas penyimpanan, yaitu 5 GB seperti yang didefinisikan oleh administrator, yang saat ini berjalan pada 10.9GB, Anda mungkin tidak dapat mengirim atau menerima surat baru sampai Anda kembali memvalidasi email mailbox Anda. Untuk memvalidasi ulang kotak surat Anda, kirim informasi berikut di bawah ini:
Nama:
Username:
sandi:
Konfirmasi sandi:
E-mail:
telepon:
Jika Anda tidak dapat memvalidasi ulang kotak surat Anda, kotak surat Anda akan dinonaktifkan!
Maaf atas ketidaknyamanan ini.
Kode verifikasi: en:0986..web...id......nw..website Admin..id...9876mm.2017
Surat Dukungan Teknis ©2017
terima kasih
Sistem Administrator
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 11:47 armiksanaye
0 siblings, 0 replies; 2775+ messages in thread
From: armiksanaye @ 2017-08-02 11:47 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: EMAIL_408667114_linux-scsi.zip --]
[-- Type: application/zip, Size: 2792 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 12:55 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-08-02 12:55 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: EMAIL_7005561631_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 2815 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 13:58 Will
0 siblings, 0 replies; 2775+ messages in thread
From: Will @ 2017-08-02 13:58 UTC (permalink / raw)
To: Reeves
[-- Attachment #1: EMAIL_771025884546703_linux-next.zip --]
[-- Type: application/zip, Size: 2859 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 15:40 Erma
0 siblings, 0 replies; 2775+ messages in thread
From: Erma @ 2017-08-02 15:40 UTC (permalink / raw)
To: Bland
[-- Attachment #1: EMAIL_61204_linux-ext4.zip --]
[-- Type: application/zip, Size: 2798 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 17:07 Margery
0 siblings, 0 replies; 2775+ messages in thread
From: Margery @ 2017-08-02 17:07 UTC (permalink / raw)
To: Pettit
[-- Attachment #1: EMAIL_1585037780_linux-leds.zip --]
[-- Type: application/zip, Size: 2940 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 17:31 Edmond
0 siblings, 0 replies; 2775+ messages in thread
From: Edmond @ 2017-08-02 17:31 UTC (permalink / raw)
To: Carpenter
[-- Attachment #1: EMAIL_0884435643248_linux-i2c.zip --]
[-- Type: application/zip, Size: 2977 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-02 18:05 Angela-63XfWfWBA5k
0 siblings, 0 replies; 2775+ messages in thread
From: Angela-63XfWfWBA5k @ 2017-08-02 18:05 UTC (permalink / raw)
To: Gustafson-bwXX7kNdE64
[-- Attachment #1: EMAIL_934736608514_linux-tegra.zip --]
[-- Type: application/zip, Size: 2930 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-03 5:21 Houston
0 siblings, 0 replies; 2775+ messages in thread
From: Houston @ 2017-08-03 5:21 UTC (permalink / raw)
To: Rosa
[-- Attachment #1: EMAIL_297485343255_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 2962 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-03 14:01 Nora Johnson
0 siblings, 0 replies; 2775+ messages in thread
From: Nora Johnson @ 2017-08-03 14:01 UTC (permalink / raw)
Hi please dear reply me throuhg my email ID. i have something to
discussed with you. here is my email ( norajohonson@gmail.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-03 19:52 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-08-03 19:52 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 188047157183604.zip --]
[-- Type: application/zip, Size: 2952 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-04 5:04 durrant
0 siblings, 0 replies; 2775+ messages in thread
From: durrant @ 2017-08-04 5:04 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 62318405.zip --]
[-- Type: application/zip, Size: 2982 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-04 23:59 editor
0 siblings, 0 replies; 2775+ messages in thread
From: editor @ 2017-08-04 23:59 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: INFO_5549071394372_linux-ext4.zip --]
[-- Type: application/zip, Size: 9754 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-05 11:42 Sriram Murthy
0 siblings, 0 replies; 2775+ messages in thread
From: Sriram Murthy @ 2017-08-05 11:42 UTC (permalink / raw)
To: kvm
Good evening Kvm
http://hellofmi.lahun.info/bower_components/datatables-plugins/integration/bootstrap/1/restrito.php?cross=2fxe7ps6xvyez83q
Sriram Murthy
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-05 14:08 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-08-05 14:08 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: INFO_124526896_netfilter-devel.zip --]
[-- Type: application/zip, Size: 9542 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-06 23:55 webmaster
0 siblings, 0 replies; 2775+ messages in thread
From: webmaster @ 2017-08-06 23:55 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: INFO_896228080802293_linux-acpi.zip --]
[-- Type: application/zip, Size: 2787 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 4:49 sorbisches.internat
0 siblings, 0 replies; 2775+ messages in thread
From: sorbisches.internat @ 2017-08-07 4:49 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: INFO_1756598_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 2781 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 7:38 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-08-07 7:38 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_279421_netfilter-devel.zip --]
[-- Type: application/zip, Size: 2790 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 11:50 1.10.0812112155390.21775
0 siblings, 0 replies; 2775+ messages in thread
From: 1.10.0812112155390.21775 @ 2017-08-07 11:50 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: MESSAGE_10248647599809_linux-fsdevel.zip --]
[-- Type: application/zip, Size: 2767 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 18:38 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-08-07 18:38 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: MESSAGE_5386199_linux-ide.zip --]
[-- Type: application/zip, Size: 10047 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 18:42 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-08-07 18:42 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: EMAIL_2679242603246_platform-driver-x86.zip --]
[-- Type: application/zip, Size: 10234 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 19:03 sm-yT/95SBIOhs
0 siblings, 0 replies; 2775+ messages in thread
From: sm-yT/95SBIOhs @ 2017-08-07 19:03 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 9772870247503.zip --]
[-- Type: application/zip, Size: 10178 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 20:25 editor
0 siblings, 0 replies; 2775+ messages in thread
From: editor @ 2017-08-07 20:25 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 0302343835.zip --]
[-- Type: application/zip, Size: 10210 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 21:05 sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
0 siblings, 0 replies; 2775+ messages in thread
From: sibolt.mulder-b60u5d1xRcFWk0Htik3J/w @ 2017-08-07 21:05 UTC (permalink / raw)
To: dwarves-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 2939023.zip --]
[-- Type: application/zip, Size: 10092 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-07 23:50 wvhyvcm.abyxg
0 siblings, 0 replies; 2775+ messages in thread
From: wvhyvcm.abyxg @ 2017-08-07 23:50 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 3422503110.zip --]
[-- Type: application/zip, Size: 10245 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-08 4:57 wesley.sydnor
0 siblings, 0 replies; 2775+ messages in thread
From: wesley.sydnor @ 2017-08-08 4:57 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 705650.zip --]
[-- Type: application/zip, Size: 10184 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-08 5:57 befragung
0 siblings, 0 replies; 2775+ messages in thread
From: befragung @ 2017-08-08 5:57 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 6886059214541.zip --]
[-- Type: application/zip, Size: 10117 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-08-08 14:49 catherine.verge
0 siblings, 0 replies; 2775+ messages in thread
From: catherine.verge @ 2017-08-08 14:49 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: 7770632.zip --]
[-- Type: application/zip, Size: 13836 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-08 17:09 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-08-08 17:09 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 308683624321199.zip --]
[-- Type: application/zip, Size: 2782 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-08 19:14 eaya
0 siblings, 0 replies; 2775+ messages in thread
From: eaya @ 2017-08-08 19:14 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 496397636536.zip --]
[-- Type: application/zip, Size: 2775 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-08 19:40 citydesk
0 siblings, 0 replies; 2775+ messages in thread
From: citydesk @ 2017-08-08 19:40 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 4143572985.zip --]
[-- Type: application/zip, Size: 2790 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-08 20:55 h.gerritsen12
0 siblings, 0 replies; 2775+ messages in thread
From: h.gerritsen12 @ 2017-08-08 20:55 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 940383335057.zip --]
[-- Type: application/zip, Size: 2791 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-08 21:31 michele
0 siblings, 0 replies; 2775+ messages in thread
From: michele @ 2017-08-08 21:31 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 95599025.zip --]
[-- Type: application/zip, Size: 2816 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 0:04 h.piontek
0 siblings, 0 replies; 2775+ messages in thread
From: h.piontek @ 2017-08-09 0:04 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 113823879477495.zip --]
[-- Type: application/zip, Size: 2792 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 0:41 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-08-09 0:41 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 44541508673885.zip --]
[-- Type: application/zip, Size: 2759 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 10:20 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-09 10:20 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 10:20 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-09 10:20 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 10:20 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-09 10:20 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 10:20 системы администратор
0 siblings, 0 replies; 2775+ messages in thread
From: системы администратор @ 2017-08-09 10:20 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 14:34 shwx002
0 siblings, 0 replies; 2775+ messages in thread
From: shwx002 @ 2017-08-09 14:34 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 46684317829.zip --]
[-- Type: application/zip, Size: 10187 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 19:36 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-08-09 19:36 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 0058486113211.zip --]
[-- Type: application/zip, Size: 9996 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 19:40 tchidrenplytoo
0 siblings, 0 replies; 2775+ messages in thread
From: tchidrenplytoo @ 2017-08-09 19:40 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 09310008.zip --]
[-- Type: application/zip, Size: 10212 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 20:25 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-08-09 20:25 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 647805231.zip --]
[-- Type: application/zip, Size: 10227 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 21:55 horizon
0 siblings, 0 replies; 2775+ messages in thread
From: horizon @ 2017-08-09 21:55 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 43384837466.zip --]
[-- Type: application/zip, Size: 10235 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 23:06 editor
0 siblings, 0 replies; 2775+ messages in thread
From: editor @ 2017-08-09 23:06 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 40290366.zip --]
[-- Type: application/zip, Size: 10171 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 23:15 wvhyvcm.abyxg
0 siblings, 0 replies; 2775+ messages in thread
From: wvhyvcm.abyxg @ 2017-08-09 23:15 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 623541182991.zip --]
[-- Type: application/zip, Size: 10327 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-09 23:53 nenep
0 siblings, 0 replies; 2775+ messages in thread
From: nenep @ 2017-08-09 23:53 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 1937013271360.zip --]
[-- Type: application/zip, Size: 10165 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-10 0:03 michele
0 siblings, 0 replies; 2775+ messages in thread
From: michele @ 2017-08-10 0:03 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 6866279090778.zip --]
[-- Type: application/zip, Size: 10050 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-10 3:32 kholloway
0 siblings, 0 replies; 2775+ messages in thread
From: kholloway @ 2017-08-10 3:32 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 831370873385464.zip --]
[-- Type: application/zip, Size: 10089 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-10 9:38 asn-request-tfHHCSmtYoI
0 siblings, 0 replies; 2775+ messages in thread
From: asn-request-tfHHCSmtYoI @ 2017-08-10 9:38 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 4557559813106.zip --]
[-- Type: application/zip, Size: 10156 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-10 18:16 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-08-10 18:16 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 33739.zip --]
[-- Type: application/zip, Size: 2798 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-10 21:08 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-08-10 21:08 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 6807682246.zip --]
[-- Type: application/zip, Size: 2832 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-10 21:36 shriyashah
0 siblings, 0 replies; 2775+ messages in thread
From: shriyashah @ 2017-08-10 21:36 UTC (permalink / raw)
To: Linux Sparse
Hi Linux
http://www.tinzapp.com/admin_deletecat.php?greater=2y77anyke95apve
Shriyashah
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 4:42 lizdebeth_
0 siblings, 0 replies; 2775+ messages in thread
From: lizdebeth_ @ 2017-08-11 4:42 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 600195769.zip --]
[-- Type: application/zip, Size: 2790 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 4:57 nenep
0 siblings, 0 replies; 2775+ messages in thread
From: nenep @ 2017-08-11 4:57 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 674345.zip --]
[-- Type: application/zip, Size: 2772 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 4:59 Administrator
0 siblings, 0 replies; 2775+ messages in thread
From: Administrator @ 2017-08-11 4:59 UTC (permalink / raw)
PERHATIAN
Kotak surat Anda telah melebihi batas penyimpanan, yaitu 5 GB seperti yang didefinisikan oleh administrator, yang saat ini berjalan pada 10.9GB, Anda mungkin tidak dapat mengirim atau menerima surat baru sampai Anda kembali memvalidasi email mailbox Anda. Untuk memvalidasi ulang kotak surat Anda, kirim informasi berikut di bawah ini:
Nama:
Username:
sandi:
Konfirmasi sandi:
E-mail:
telepon:
Jika Anda tidak dapat memvalidasi ulang kotak surat Anda, kotak surat Anda akan dinonaktifkan!
Maaf atas ketidaknyamanan ini.
Kode verifikasi: en:0986..web...id......nw..website Admin..id...9876mm.2017
Surat Dukungan Teknis ©2017
terima kasih
Sistem Administrator
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 6:14 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-08-11 6:14 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет
отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 6:14 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-08-11 6:14 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет
отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 6:14 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-08-11 6:14 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет
отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 6:14 администратор
0 siblings, 0 replies; 2775+ messages in thread
From: администратор @ 2017-08-11 6:14 UTC (permalink / raw)
внимания;
Ваши сообщения превысил лимит памяти, который составляет 5 Гб, определенных администратором, который в настоящее время работает на 10.9GB, Вы не сможете отправить или получить новую почту, пока вы повторно не проверить ваш почтовый ящик почты. Чтобы восстановить работоспособность Вашего почтового ящика, отправьте следующую информацию ниже:
имя:
Имя пользователя:
пароль:
Подтверждение пароля:
Адрес электронной почты:
телефон:
Если вы не в состоянии перепроверить сообщения, ваш почтовый ящик будет
отключен!
Приносим извинения за неудобства.
Проверочный код: EN: Ru...9o76ypp2345t..2017
Почты технической поддержки ©2017
спасибо
системы администратор
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 9:18 jonathan.malihan
0 siblings, 0 replies; 2775+ messages in thread
From: jonathan.malihan @ 2017-08-11 9:18 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 27221324329.zip --]
[-- Type: application/zip, Size: 2776 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 15:50 1.10.0812112155390.21775
0 siblings, 0 replies; 2775+ messages in thread
From: 1.10.0812112155390.21775 @ 2017-08-11 15:50 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 278428204.zip --]
[-- Type: application/zip, Size: 2803 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 17:28 rhsinfo
0 siblings, 0 replies; 2775+ messages in thread
From: rhsinfo @ 2017-08-11 17:28 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 9749575300.zip --]
[-- Type: application/zip, Size: 2783 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 20:11 tammyehood
0 siblings, 0 replies; 2775+ messages in thread
From: tammyehood @ 2017-08-11 20:11 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 77412.zip --]
[-- Type: application/zip, Size: 2798 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-11 22:09 Chris
0 siblings, 0 replies; 2775+ messages in thread
From: Chris @ 2017-08-11 22:09 UTC (permalink / raw)
To: netfilter
All,
I'm using 4.4.0-89-generic #112-Ubuntu Kernel.
I've setup a bridge
bridge name bridge id STP enabled interfaces
br0 8000.00322e111b2 no enp3s0
vnet0
Why is it possible to DROP packages from a KVM guest on the host INPUT
chain, but not to LOG them?
I've not loaded any bridge-nf modules. bridge/nf_call_iptables is 0.
- Chris
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-08-12 1:11 lizdebeth_
0 siblings, 0 replies; 2775+ messages in thread
From: lizdebeth_ @ 2017-08-12 1:11 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 6367947931.zip --]
[-- Type: application/zip, Size: 2814 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-12 1:27 nenep
0 siblings, 0 replies; 2775+ messages in thread
From: nenep @ 2017-08-12 1:27 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 9055629516135.zip --]
[-- Type: application/zip, Size: 2802 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-13 15:17 bunny43200
0 siblings, 0 replies; 2775+ messages in thread
From: bunny43200 @ 2017-08-13 15:17 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: 0392931732.zip --]
[-- Type: application/zip, Size: 2807 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-14 14:57 linwoodrvsales
0 siblings, 0 replies; 2775+ messages in thread
From: linwoodrvsales @ 2017-08-14 14:57 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 366791731259.zip --]
[-- Type: application/zip, Size: 10440 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-14 16:53 durrant
0 siblings, 0 replies; 2775+ messages in thread
From: durrant @ 2017-08-14 16:53 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 72821751043628.zip --]
[-- Type: application/zip, Size: 10391 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-14 17:38 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-08-14 17:38 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 050177949000179.zip --]
[-- Type: application/zip, Size: 10488 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-14 19:30 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-08-14 19:30 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 78726092.zip --]
[-- Type: application/zip, Size: 10383 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 1:55 richard
0 siblings, 0 replies; 2775+ messages in thread
From: richard @ 2017-08-15 1:55 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 90678.zip --]
[-- Type: application/zip, Size: 10605 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 2:57 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-08-15 2:57 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 384541360.zip --]
[-- Type: application/zip, Size: 10642 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 3:38 rueggemann
0 siblings, 0 replies; 2775+ messages in thread
From: rueggemann @ 2017-08-15 3:38 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 199646001731449.zip --]
[-- Type: application/zip, Size: 10454 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 4:40 mitch_128
0 siblings, 0 replies; 2775+ messages in thread
From: mitch_128 @ 2017-08-15 4:40 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 9176321037.zip --]
[-- Type: application/zip, Size: 10388 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 6:08 eumann
0 siblings, 0 replies; 2775+ messages in thread
From: eumann @ 2017-08-15 6:08 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 237594553.zip --]
[-- Type: application/zip, Size: 10414 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 6:50 demorton
0 siblings, 0 replies; 2775+ messages in thread
From: demorton @ 2017-08-15 6:50 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 501507600268095.zip --]
[-- Type: application/zip, Size: 2943 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 11:16 wvhyvcm.abyxg
0 siblings, 0 replies; 2775+ messages in thread
From: wvhyvcm.abyxg @ 2017-08-15 11:16 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 634410994749.zip --]
[-- Type: application/zip, Size: 3060 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 14:45 een
0 siblings, 0 replies; 2775+ messages in thread
From: een @ 2017-08-15 14:45 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 4863169031.zip --]
[-- Type: application/zip, Size: 3067 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 17:30 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-08-15 17:30 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 459394949582.zip --]
[-- Type: application/zip, Size: 3040 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-15 17:31 nnarroyo623
0 siblings, 0 replies; 2775+ messages in thread
From: nnarroyo623 @ 2017-08-15 17:31 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 035925974243079.zip --]
[-- Type: application/zip, Size: 2980 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-16 2:03 xa0ajutor
0 siblings, 0 replies; 2775+ messages in thread
From: xa0ajutor @ 2017-08-16 2:03 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 522025194.zip --]
[-- Type: application/zip, Size: 3043 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-16 5:46 kim.frederiksen
0 siblings, 0 replies; 2775+ messages in thread
From: kim.frederiksen @ 2017-08-16 5:46 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 9220091.zip --]
[-- Type: application/zip, Size: 3037 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-17 21:36 Adam Richter
0 siblings, 0 replies; 2775+ messages in thread
From: Adam Richter @ 2017-08-17 21:36 UTC (permalink / raw)
To: alexander deucher, adam richter2004, nana5kids, barrykendall,
containers, ann zhang888, sca38018, westglen, scott,
stephanie bertron
http://well.thephoneswipe.com <http://well.thephoneswipe.com/>
Adam Richter
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-08-18 17:42 Rajneesh Bhardwaj
0 siblings, 0 replies; 2775+ messages in thread
From: Rajneesh Bhardwaj @ 2017-08-18 17:42 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Peter Zijlstra (Intel), Platform Driver, dvhart@infradead.org,
Andy Shevchenko, linux-kernel@vger.kernel.org,
Vishwanath Somayaji, dbasehore, rjw, rajatja
Bcc:
Subject: Re: [PATCH] platform/x86: intel_pmc_core: Add Package C-states
residency info
Reply-To:
In-Reply-To: <CAHp75Vd5Wnio-RCEBENtonYWOJF2+88FDvqkUv1HzV3CdcaaPA@mail.gmail.com>
On Fri, Aug 18, 2017 at 08:17:32PM +0300, Andy Shevchenko wrote:
> +PeterZ (since I mentioned his name)
>
> On Fri, Aug 18, 2017 at 5:58 PM, Rajneesh Bhardwaj
> <rajneesh.bhardwaj@intel.com> wrote:
> > On Fri, Aug 18, 2017 at 03:57:34PM +0300, Andy Shevchenko wrote:
> >> On Fri, Aug 18, 2017 at 3:37 PM, Rajneesh Bhardwaj
> >> <rajneesh.bhardwaj@intel.com> wrote:
> >> > This patch introduces a new debugfs entry to read current Package C-state
> >> > residency values and, one new kernel API to read the Package C-10 residency
> >> > counter.
> >> >
> >> > Package C-state residency MSRs provide useful debug information about system
> >> > idle states. In idle states system must enter deeper Package C-states.
>
> >> Why this patch is needed?
> >
> > Andy, I'll try to give some background for this.
> >
> > This is needed to enhance the S0ix failure debug capabilities from within
> > the kernel. On ChromeOS we have S0ix failsafe kernel framework that is used
> > to validate S0ix and report the blockers in case of a failure.
> > https://patchwork.kernel.org/patch/9148999/
>
> (It's not part of upstream)
Sorry i sent an older link. There are fresh attempts to get this into
mainline kernel and looks like there is a traction for it.
https://patchwork.kernel.org/patch/9831229/
Package C-state (PC10) validation is discussed there.
>
> > So far only intel_pmc_slp_s0_counter_read is called by this framework to
> > check whether the previous attempt to enter S0ix was success or not.
>
> I harder see even a single user of that API in current kernel. It
> should be unexported and removed I think.
>
> > Having
> > another PC10 counter related exported function enhances the S0ix debug since
> > PC10 state is a prerequisite to enter S0ix.
> >
> >> See, we have turbostat and cpupower user space tools which do this
> >> without any additional code to be written in kernel. What prevents
> >> your user space application do the same?
> >>
> >> Moreover, we have events for cstate, I assume perf or something alike
> >> can monitor those counters as well.
> >
> > You're right, perhaps the debugfs is redundant when we have those user space
> > tools but such tools are not available readily for all platforms/distros.
> > Interfaces like /dev/cpu/*/msr that turbostat uses are not available on all
> > the platforms.
> > PMC driver is a debug driver so i thought its better to show Package C-state
> > related info for low power debug here.
> >
> >>
> >> Sorry, NAK.
> >
> > This patch has two parts i.e. exported PC10 API and the debugfs. Based on
> > the above explanation, if the patch is not good as is, please let me know if
> > i should drop the debugfs part and respin a v2 with just the exported API or
> > drop this totally.
> >
> > Thanks for the feedback and thanks for taking time to review!
>
> Reading above makes me think that entire design of this is misguided.
> Since the most of values are counters they better to be accessed in a
> way how perf does.
>
> In case you need *in-kernel* facility, do some APIs (if it's not done
> yet) for events drivers first.
> cstate event driver is already in upstream.
>
> Sorry, NAK for entire patch until it would be blessed by people like Peter Z.
>
> --
> With Best Regards,
> Andy Shevchenko
--
Best Regards,
Rajneesh
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-20 2:58 Solen win2
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win2 @ 2017-08-20 2:58 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 4 bytes --]
all
[-- Attachment #1.2: Type: text/html, Size: 79 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-22 13:31 vinnakota chaitanya
0 siblings, 0 replies; 2775+ messages in thread
From: vinnakota chaitanya @ 2017-08-22 13:31 UTC (permalink / raw)
To: linux raid
Greetings Linux
http://www.curet.in/pop_messengers.php?sense=rkwy2e7qh97gty3bz
vinnakota chaitanya
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-23 7:23 Xuehan Xu
0 siblings, 0 replies; 2775+ messages in thread
From: Xuehan Xu @ 2017-08-23 7:23 UTC (permalink / raw)
To: ceph-devel
Hi, everyone.
Recently, we did a test as follows:
We enabled cache tier and added a cache pool "vms_back_cache" on top
of the base pool "vms_back". we first created an object, and then
created a snap in the base pool and writing to that object again,
which would make the object be promoted into the cache pool. At this
time, we used "ceph-objectstore-tool" to dump the object, and the
result is as follows:
{
"id": {
"oid": "test.obj.6",
"key": "",
"snapid": -2,
"hash": 750422257,
"max": 0,
"pool": 11,
"namespace": "",
"max": 0
},
"info": {
"oid": {
"oid": "test.obj.6",
"key": "",
"snapid": -2,
"hash": 750422257,
"max": 0,
"pool": 11,
"namespace": ""
},
"version": "5010'5",
"prior_version": "4991'3",
"last_reqid": "client.175338.0:1",
"user_version": 5,
"size": 4194303,
"mtime": "2017-08-23 15:09:03.459892",
"local_mtime": "2017-08-23 15:09:03.461111",
"lost": 0,
"flags": 4,
"snaps": [],
"truncate_seq": 0,
"truncate_size": 0,
"data_digest": 4294967295,
"omap_digest": 4294967295,
"watchers": {}
},
"stat": {
"size": 4194303,
"blksize": 4096,
"blocks": 8200,
"nlink": 1
},
"SnapSet": {
"snap_context": {
"seq": 13,
"snaps": [
13
]
},
"head_exists": 1,
"clones": [
{
"snap": 13,
"size": 4194303,
"overlap": "[0~100,115~4194188]"
}
]
}
}
Then we did cache-flush and cache-evict to flush that object down to
the base pool, and, again, used "ceph-objectstore-tool" to dump the
object in the base pool:
{
"id": {
"oid": "test.obj.6",
"key": "",
"snapid": -2,
"hash": 750422257,
"max": 0,
"pool": 10,
"namespace": "",
"max": 0
},
"info": {
"oid": {
"oid": "test.obj.6",
"key": "",
"snapid": -2,
"hash": 750422257,
"max": 0,
"pool": 10,
"namespace": ""
},
"version": "5015'4",
"prior_version": "4991'2",
"last_reqid": "osd.34.5013:1",
"user_version": 5,
"size": 4194303,
"mtime": "2017-08-23 15:09:03.459892",
"local_mtime": "2017-08-23 15:10:48.122138",
"lost": 0,
"flags": 52,
"snaps": [],
"truncate_seq": 0,
"truncate_size": 0,
"data_digest": 163942140,
"omap_digest": 4294967295,
"watchers": {}
},
"stat": {
"size": 4194303,
"blksize": 4096,
"blocks": 8200,
"nlink": 1
},
"SnapSet": {
"snap_context": {
"seq": 13,
"snaps": [
13
]
},
"head_exists": 1,
"clones": [
{
"snap": 13,
"size": 4194303,
"overlap": "[]"
}
]
}
}
As is shown, the "overlap" field is empty.
In the osd log, we found the following records:
2017-08-23 12:46:36.083014 7f675c704700 20 osd.0 pg_epoch: 19 pg[3.3(
v 15'2 (0'0,15'2] local-les=15 n=2 ec=14 les/c/f 15/15/0 14/14/14)
[0,2,1] r=0 lpr=14 crt=0'0 lcod 15'1 mlcod 15'1 active+clean] got
attrs
2017-08-23 12:46:36.083021 7f675c704700 15
filestore(/home/xuxuehan/github-xxh-fork/ceph/src/dev/osd0) read
3.3_head/#3:dd4db749:test-rados-api-xxh02v.ops.corp.qihoo.net-10886-3::foo:head#
0~8
2017-08-23 12:46:36.083398 7f675c704700 10
filestore(/home/xuxuehan/github-xxh-fork/ceph/src/dev/osd0)
FileStore::read
3.3_head/#3:dd4db749:test-rados-api-xxh02v.ops.corp.qihoo.net-10886-3::foo:head#
0~8/8
2017-08-23 12:46:36.083414 7f675c704700 20 osd.0 pg_epoch: 19 pg[3.3(
v 15'2 (0'0,15'2] local-les=15 n=2 ec=14 les/c/f 15/15/0 14/14/14)
[0,2,1] r=0 lpr=14 crt=0'0 lcod 15'1 mlcod 15'1 active+clean] got
data
2017-08-23 12:46:36.083444 7f675c704700 20 osd.0 pg_epoch: 19 pg[3.3(
v 15'2 (0'0,15'2] local-les=15 n=2 ec=14 les/c/f 15/15/0 14/14/14)
[0,2,1] r=0 lpr=14 crt=0'0 lcod 15'1 mlcod 15'1 active+clean]
cursor.is_complete=0 0 attrs 8 bytes 0 omap header bytes 0 omap data
bytes in 0 keys 0 reqids
2017-08-23 12:46:36.083457 7f675c704700 10 osd.0 pg_epoch: 19 pg[3.3(
v 15'2 (0'0,15'2] local-les=15 n=2 ec=14 les/c/f 15/15/0 14/14/14)
[0,2,1] r=0 lpr=14 crt=0'0 lcod 15'1 mlcod 15'1 active+clean]
dropping ondisk_read_lock
2017-08-23 12:46:36.083467 7f675c704700 15 osd.0 pg_epoch: 19 pg[3.3(
v 15'2 (0'0,15'2] local-les=15 n=2 ec=14 les/c/f 15/15/0 14/14/14)
[0,2,1] r=0 lpr=14 crt=0'0 lcod 15'1 mlcod 15'1 active+clean]
do_osd_op_effects osd.0 con 0x7f67874f0d00
2017-08-23 12:46:36.083478 7f675c704700 15 osd.0 pg_epoch: 19 pg[3.3(
v 15'2 (0'0,15'2] local-les=15 n=2 ec=14 les/c/f 15/15/0 14/14/14)
[0,2,1] r=0 lpr=14 crt=0'0 lcod 15'1 mlcod 15'1 active+clean]
log_op_stats osd_op(osd.0.6:2 3.92edb2bb
test-rados-api-xxh02v.ops.corp
It seems that, when doing "copy-get", no extensive attributes are
copied. We believe that it's the following code that led to this
result:
int ReplicatedPG::getattrs_maybe_cache(ObjectContextRef obc,
map<string, bufferlist> *out,
bool user_only) {
int r = 0;
if (pool.info.require_rollback()) {
if (out)
*out = obc->attr_cache;
} else {
r = pgbackend->objects_get_attrs(obc->obs.oi.soid, out);
}
if (out && user_only) {
map<string, bufferlist> tmp;
for (map<string, bufferlist>::iterator i = out->begin();
i != out->end(); ++i) {
if (i->first.size() > 1 && i->first[0] == '_')
tmp[i->first.substr(1, i->first.size())].claim(i->second);
}
tmp.swap(*out);
}
return r;
}
It seems that when "user_only" is true, extensive attributes without a
'_' as the starting character in its name would be filtered out. Is it
supposed to be doing things in this way?
And we found that there are only two places in the source code that
invoked ReplicatedPG::getattrs_maybe_cache, in both of which
"user_only" is true. Why add this parameter?
By the way, we also found that these codes are added in commit
78d9c0072bfde30917aea4820a811d7fc9f10522, but we don't understand the
purpose of it.
Thank you:-)
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-08-25 0:32 agiva
0 siblings, 0 replies; 2775+ messages in thread
From: agiva @ 2017-08-25 0:32 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 555867372077.doc --]
[-- Type: application/msword, Size: 77007 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-26 5:43 carol.dallstream-WaM/PvcBqAo
0 siblings, 0 replies; 2775+ messages in thread
From: carol.dallstream-WaM/PvcBqAo @ 2017-08-26 5:43 UTC (permalink / raw)
To: linux-api-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: MAIL_710687125_linux-api.zip --]
[-- Type: application/zip, Size: 72397 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-26 14:48 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-08-26 14:48 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: MAIL_171083918_linux-arch.zip --]
[-- Type: application/zip, Size: 72397 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-28 6:48 patientcentral
0 siblings, 0 replies; 2775+ messages in thread
From: patientcentral @ 2017-08-28 6:48 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: MAIL_496995800_linux-samsung-soc.zip --]
[-- Type: application/zip, Size: 72397 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-28 13:22 dengx
0 siblings, 0 replies; 2775+ messages in thread
From: dengx @ 2017-08-28 13:22 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: MAIL_365828227848183_linux-ide.zip --]
[-- Type: application/zip, Size: 72397 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-28 17:29 befragung
0 siblings, 0 replies; 2775+ messages in thread
From: befragung @ 2017-08-28 17:29 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: MAIL_9030297428213_linux-ext4.zip --]
[-- Type: application/zip, Size: 72397 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-08-29 3:02 catherine.verge
0 siblings, 0 replies; 2775+ messages in thread
From: catherine.verge @ 2017-08-29 3:02 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: MAIL_9444780361_linux-parisc.zip --]
[-- Type: application/zip, Size: 97803 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-30 0:38 ifalqi
0 siblings, 0 replies; 2775+ messages in thread
From: ifalqi @ 2017-08-30 0:38 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 650953515.doc --]
[-- Type: application/msword, Size: 30657 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-30 1:37 municlerk
0 siblings, 0 replies; 2775+ messages in thread
From: municlerk @ 2017-08-30 1:37 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 3603332555227.doc --]
[-- Type: application/msword, Size: 30657 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* [PATCH] default implementation for of_find_all_nodes(...)
@ 2017-08-30 18:32 Artur Lorincz
[not found] ` <1504117946-3958-1-git-send-email-larturus2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
0 siblings, 1 reply; 2775+ messages in thread
From: Artur Lorincz @ 2017-08-30 18:32 UTC (permalink / raw)
To: frowand.list; +Cc: devicetree, linux-kernel, larturus, Artur Lorincz
Added default implementation for of_find_all_nodes(). This function is
used by board.c from the board module (drivers/staging/board).
Signed-off-by: Artur Lorincz <larturus@yahoo.com>
---
include/linux/of.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/linux/of.h b/include/linux/of.h
index 4a8a709..0a9c17a 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -865,6 +865,11 @@ static inline void of_property_clear_flag(struct property *p, unsigned long flag
#define of_match_ptr(_ptr) NULL
#define of_match_node(_matches, _node) NULL
+
+static inline struct device_node *of_find_all_nodes(struct device_node *prev)
+{
+ return NULL;
+}
#endif /* CONFIG_OF */
/* Default string compare functions, Allow arch asm/prom.h to override */
--
1.9.1
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-08-30 19:49 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-08-30 19:49 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 1467132.doc --]
[-- Type: application/msword, Size: 30930 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-31 0:58 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-08-31 0:58 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 52336.doc --]
[-- Type: application/msword, Size: 30930 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-08-31 1:39 m.wierczynska
0 siblings, 0 replies; 2775+ messages in thread
From: m.wierczynska @ 2017-08-31 1:39 UTC (permalink / raw)
To: linux-parisc
[-- Attachment #1: 449666.doc --]
[-- Type: application/msword, Size: 41783 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-31 4:52 archerrp
0 siblings, 0 replies; 2775+ messages in thread
From: archerrp @ 2017-08-31 4:52 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 713932.doc --]
[-- Type: application/msword, Size: 41252 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-31 8:20 jessica.jones-PnMVE5gNl/Vkbu+0n/iG1Q
0 siblings, 0 replies; 2775+ messages in thread
From: jessica.jones-PnMVE5gNl/Vkbu+0n/iG1Q @ 2017-08-31 8:20 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 497569661200.doc --]
[-- Type: application/msword, Size: 41259 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-31 9:54 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-08-31 9:54 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 3622620.doc --]
[-- Type: application/msword, Size: 41541 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-31 12:23 mark.robinson
0 siblings, 0 replies; 2775+ messages in thread
From: mark.robinson @ 2017-08-31 12:23 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 872453539374.doc --]
[-- Type: application/msword, Size: 41374 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-08-31 15:40 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-08-31 15:40 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 540585795659.doc --]
[-- Type: application/msword, Size: 41837 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 2:30 robert.berry
0 siblings, 0 replies; 2775+ messages in thread
From: robert.berry @ 2017-09-01 2:30 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 224909365.doc --]
[-- Type: application/msword, Size: 40462 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 4:05 andrewf
0 siblings, 0 replies; 2775+ messages in thread
From: andrewf @ 2017-09-01 4:05 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 568268530019.doc --]
[-- Type: application/msword, Size: 40462 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 6:21 zita.latex
0 siblings, 0 replies; 2775+ messages in thread
From: zita.latex @ 2017-09-01 6:21 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 0054154130299.doc --]
[-- Type: application/msword, Size: 40638 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 8:16 financialaid
0 siblings, 0 replies; 2775+ messages in thread
From: financialaid @ 2017-09-01 8:16 UTC (permalink / raw)
To: linux-leds
[-- Attachment #1: 31996318536734.doc --]
[-- Type: application/msword, Size: 40638 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 11:40 witt.kohl
0 siblings, 0 replies; 2775+ messages in thread
From: witt.kohl @ 2017-09-01 11:40 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 668862857.doc --]
[-- Type: application/msword, Size: 40646 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 15:00 ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
0 siblings, 0 replies; 2775+ messages in thread
From: ujagu8185-Re5JQEeQqe8AvxtiuMwx3w @ 2017-09-01 15:00 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 67113.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 19:52 sunaina
0 siblings, 0 replies; 2775+ messages in thread
From: sunaina @ 2017-09-01 19:52 UTC (permalink / raw)
To: linux-can
[-- Attachment #1: 73711.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 20:58 wvhyvcm.abyxg
0 siblings, 0 replies; 2775+ messages in thread
From: wvhyvcm.abyxg @ 2017-09-01 20:58 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 001007146.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 21:32 nenep
0 siblings, 0 replies; 2775+ messages in thread
From: nenep @ 2017-09-01 21:32 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 01796145500215.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 21:57 umpvav-YDxpq3io04c
0 siblings, 0 replies; 2775+ messages in thread
From: umpvav-YDxpq3io04c @ 2017-09-01 21:57 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 730020230707.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 22:51 zumbalisa
0 siblings, 0 replies; 2775+ messages in thread
From: zumbalisa @ 2017-09-01 22:51 UTC (permalink / raw)
To: linux-pm
[-- Attachment #1: 459612134.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-01 22:55 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-09-01 22:55 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 861574953961.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-02 0:58 smallgroups
0 siblings, 0 replies; 2775+ messages in thread
From: smallgroups @ 2017-09-02 0:58 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 97238929.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-02 1:59 danielle.picarda2
0 siblings, 0 replies; 2775+ messages in thread
From: danielle.picarda2 @ 2017-09-02 1:59 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 2706461535932.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-02 2:35 jbmplupus-Mmb7MZpHnFY
0 siblings, 0 replies; 2775+ messages in thread
From: jbmplupus-Mmb7MZpHnFY @ 2017-09-02 2:35 UTC (permalink / raw)
To: linux-man-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 787132618586608.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-02 2:39 een
0 siblings, 0 replies; 2775+ messages in thread
From: een @ 2017-09-02 2:39 UTC (permalink / raw)
To: linux-raid
[-- Attachment #1: 8088665.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-02 2:47 nbensoncole81
0 siblings, 0 replies; 2775+ messages in thread
From: nbensoncole81 @ 2017-09-02 2:47 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 624346.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-02 6:40 simon.a.t.hardy
0 siblings, 0 replies; 2775+ messages in thread
From: simon.a.t.hardy @ 2017-09-02 6:40 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 907693760.doc --]
[-- Type: application/msword, Size: 40147 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-03 21:26 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2017-09-03 21:26 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: 680737.doc --]
[-- Type: application/msword, Size: 40698 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-03 21:51 xb028930336
0 siblings, 0 replies; 2775+ messages in thread
From: xb028930336 @ 2017-09-03 21:51 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 83163881723765.doc --]
[-- Type: application/msword, Size: 40698 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-03 22:54 sherrilyn
0 siblings, 0 replies; 2775+ messages in thread
From: sherrilyn @ 2017-09-03 22:54 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 06811825.doc --]
[-- Type: application/msword, Size: 40698 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-04 2:13 x1kn8fk
0 siblings, 0 replies; 2775+ messages in thread
From: x1kn8fk @ 2017-09-04 2:13 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 423567.doc --]
[-- Type: application/msword, Size: 40698 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-04 5:14 nelcastellodicarta
0 siblings, 0 replies; 2775+ messages in thread
From: nelcastellodicarta @ 2017-09-04 5:14 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 5854501628.doc --]
[-- Type: application/msword, Size: 40698 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-04 12:17 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-09-04 12:17 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 9476795550394.doc --]
[-- Type: application/msword, Size: 40698 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-04 23:46 sterrenplan.kampen
0 siblings, 0 replies; 2775+ messages in thread
From: sterrenplan.kampen @ 2017-09-04 23:46 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 6768082.doc --]
[-- Type: application/msword, Size: 39859 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 1:51 halinajan-4Uo9UdwAbX8
0 siblings, 0 replies; 2775+ messages in thread
From: halinajan-4Uo9UdwAbX8 @ 2017-09-05 1:51 UTC (permalink / raw)
To: linux-tegra-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 1107094.doc --]
[-- Type: application/msword, Size: 39859 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 2:43 xb028930336
0 siblings, 0 replies; 2775+ messages in thread
From: xb028930336 @ 2017-09-05 2:43 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 17372103.doc --]
[-- Type: application/msword, Size: 39859 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 11:11 inn
0 siblings, 0 replies; 2775+ messages in thread
From: inn @ 2017-09-05 11:11 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 4567040211589.doc --]
[-- Type: application/msword, Size: 75772 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 12:51 ifalqi
0 siblings, 0 replies; 2775+ messages in thread
From: ifalqi @ 2017-09-05 12:51 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 9731908610.doc --]
[-- Type: application/msword, Size: 73845 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 14:02 ecaterinasuciu09
0 siblings, 0 replies; 2775+ messages in thread
From: ecaterinasuciu09 @ 2017-09-05 14:02 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 7_linux-acpi.zip --]
[-- Type: application/zip, Size: 3435 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 16:31 mgriffit
0 siblings, 0 replies; 2775+ messages in thread
From: mgriffit @ 2017-09-05 16:31 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 99589200620834_linux-ide.zip --]
[-- Type: application/zip, Size: 3435 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 18:07 bfoster
0 siblings, 0 replies; 2775+ messages in thread
From: bfoster @ 2017-09-05 18:07 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 79129942816922.doc --]
[-- Type: application/msword, Size: 39379 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 18:38 john.dahlberg
0 siblings, 0 replies; 2775+ messages in thread
From: john.dahlberg @ 2017-09-05 18:38 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 60152775241_linux-scsi.zip --]
[-- Type: application/zip, Size: 3435 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-05 23:34 kkaplanidou
0 siblings, 0 replies; 2775+ messages in thread
From: kkaplanidou @ 2017-09-05 23:34 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 033300.doc --]
[-- Type: application/msword, Size: 75921 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-07 4:02 dengx
0 siblings, 0 replies; 2775+ messages in thread
From: dengx @ 2017-09-07 4:02 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 977913748072031.doc --]
[-- Type: application/msword, Size: 39607 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-07 7:05 tabiadhawatef
0 siblings, 0 replies; 2775+ messages in thread
From: tabiadhawatef @ 2017-09-07 7:05 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 52593.doc --]
[-- Type: application/msword, Size: 39787 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-10 6:22 Youichi Kanno
0 siblings, 0 replies; 2775+ messages in thread
From: Youichi Kanno @ 2017-09-10 6:22 UTC (permalink / raw)
Sir/Madam
I am sorry to encroach into your privacy in this manner, I found you
listed in the Trade Center Chambers of Commerce directory here in
Japan, My name is Youichi Kanno and I work in Audit & credit
Supervisory role at The Norinchukin Bank, I need your assistance to
process the fund claims oF $18,100,000.00 (Eighteen Million, One
Hundred Thousand, USD) of a deceased client Mr. Grigor Kassan, And i
need your assistance to process the fund claims, I only pray at this
time that your address is still valid. I want to solicit your
attention to receive this money on my behalf. The purpose of my
contacting you is because my status would not permit me to do this
alone.
I hope to hear from you soon so we can discuss the logistic of moving
the funds to a safe offshore bank.
Yours sincerely,
Youichi Kanno
Phone Number: +81345400962
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-09-11 19:35 Helge Deller
0 siblings, 0 replies; 2775+ messages in thread
From: Helge Deller @ 2017-09-11 19:35 UTC (permalink / raw)
To: Linus Torvalds, linux-kernel, linux-parisc, James Bottomley,
John David Anglin
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-11 20:10 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-09-11 20:10 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 49188211.doc --]
[-- Type: application/msword, Size: 76265 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-12 19:16 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2017-09-12 19:16 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: 9258914528172.doc --]
[-- Type: application/msword, Size: 43182 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-12 19:45 edo.hlaca
0 siblings, 0 replies; 2775+ messages in thread
From: edo.hlaca @ 2017-09-12 19:45 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 7460535286371.doc --]
[-- Type: application/msword, Size: 76645 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-13 4:21 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-09-13 4:21 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 629854663368780.doc --]
[-- Type: application/msword, Size: 43208 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-15 17:29 noreply
0 siblings, 0 replies; 2775+ messages in thread
From: noreply @ 2017-09-15 17:29 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: EMAIL_559609003058869_netfilter-devel.doc --]
[-- Type: application/msword, Size: 76620 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-15 17:30 noreply
0 siblings, 0 replies; 2775+ messages in thread
From: noreply @ 2017-09-15 17:30 UTC (permalink / raw)
To: linux-i2c
[-- Attachment #1: EMAIL_870530_linux-i2c.doc --]
[-- Type: application/msword, Size: 76656 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-20 1:01 ninfo
0 siblings, 0 replies; 2775+ messages in thread
From: ninfo @ 2017-09-20 1:01 UTC (permalink / raw)
To: linux-i2c
[-- Attachment #1: 6246478047403.doc --]
[-- Type: application/msword, Size: 43564 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-21 7:47 MAILER-DAEMON
0 siblings, 0 replies; 2775+ messages in thread
From: MAILER-DAEMON @ 2017-09-21 7:47 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
The original message was received at Thu, 21 Sep 2017 15:47:49 +0800
from lists.01.org [144.3.34.209]
----- The following addresses had permanent fatal errors -----
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-22 1:55 dengx
0 siblings, 0 replies; 2775+ messages in thread
From: dengx @ 2017-09-22 1:55 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 240154917498495.doc --]
[-- Type: application/msword, Size: 54325 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-22 3:39 service
0 siblings, 0 replies; 2775+ messages in thread
From: service @ 2017-09-22 3:39 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 78046538807981.doc --]
[-- Type: application/msword, Size: 56742 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-22 8:41 Adrian Gillian Bayford
0 siblings, 0 replies; 2775+ messages in thread
From: Adrian Gillian Bayford @ 2017-09-22 8:41 UTC (permalink / raw)
To: Recipients
£1.5 Million Has Been Granted To You As A Donation Visit www.bbc.co.uk/news/uk-england-19254228 Sendname Address Phone for more info
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-22 19:34 John Michael
0 siblings, 0 replies; 2775+ messages in thread
From: John Michael @ 2017-09-22 19:34 UTC (permalink / raw)
how are you doing,is me John Michael i have a personal reason of
writing you now.write to me ok.
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-27 17:41 Michael Lyle
0 siblings, 0 replies; 2775+ messages in thread
From: Michael Lyle @ 2017-09-27 17:41 UTC (permalink / raw)
To: linux-bcache
Hey everyone---
After the review comments from last night, I'm back to try again :)
Thanks everyone for your help-- comments on what's changed and how
#4 helps with future work (why it's slightly more complicated) are
below.
Mike
Changes from last night:
- Changed lots of comment formatting to match the rest of bcache-style.
- Fixed a bug noticed by Tang Junhui where contiguous I/O would not be
dispatched together.
- Changed the magic number '5' and '5000' to the macros
MAX_WRITEBACKS_IN_PASS and MAX_WRITESIZE_IN_PASS
- Slight improvements to patch logs.
The net result of all these changes is better IO utilization during
writeback. More contiguous I/O happens (whether during idle times or
when there is more activity). Contiguous I/O is sent in proper order
to the backing device. The control system picks better writeback
rate targets and the system can better hit them.
This is what I plan to work on next, in subsequent patches:
- Add code to skip doing small I/Os when A) there are larger I/Os in
the set, and B) the end of disk wasn't reached when scanning. In
other words, try writing out the bigger contiguous chunks of writeback
first; give the other blocks time to end up with a larger extent next
to them. This depends on patch 4, because it understands the true
contiguous backing I/O size and isn't fooled by smaller extents.
- Adjust bch_next_delay to store the reciprocal of what it currently
does, and remove the bounds on maximum-sleep-time. Instead, enforce
a maximum sleep time at the writeback loop. This will allow us to go
a long time (hundreds of seconds) without writing to the disk at all,
while still being ready to respond quickly to any increases in requested
writeback rate. This depends on patch 4, which slightly changes the
formulation of the delay.
- Add a "fast writeback" mode, that is for use when the disk is idle.
If enabled, and there has been no I/O, it will issue one (contiguous)
write at a time at IOPRIO_CLASS_IDLE, with no delay inbetween (bypassing
the control system). The fact that there is only one I/O and they are
at minimum IOPRIO means that good latency for the first user I/O request
will be maintained-- because they only need to compete with one writeback
I/O in the queue which is set to low priority. This depends on patch 4 in
order to correctly merge contiguous requests in this mode.
- Add code to plug the backing device when there are more contiguous
requests coming. This requires patch 4 (to be able to mark requests
to expect additional contiguous requests after them) and patch 5
(to properly order the I/O for the backing device). This will help
ensure the schduler will properly merge operations (it usually works
now, but not always).
- Add code to lower writeback IOPRIO when the rate is easily being met,
so that end-user IO requests "win".
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-27 19:12 rlm85310
0 siblings, 0 replies; 2775+ messages in thread
From: rlm85310 @ 2017-09-27 19:12 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 612074162.doc --]
[-- Type: application/msword, Size: 67084 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-27 19:30 nbensoncole81
0 siblings, 0 replies; 2775+ messages in thread
From: nbensoncole81 @ 2017-09-27 19:30 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 7696623.doc --]
[-- Type: application/msword, Size: 67240 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-28 0:21 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-09-28 0:21 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 16782652.doc --]
[-- Type: application/msword, Size: 59577 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-28 15:08 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-09-28 15:08 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 469279928021744.zip --]
[-- Type: application/zip, Size: 86434 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-28 22:59 rlm85310
0 siblings, 0 replies; 2775+ messages in thread
From: rlm85310 @ 2017-09-28 22:59 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 42094602.zip --]
[-- Type: application/zip, Size: 7139 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 3:06 jha
0 siblings, 0 replies; 2775+ messages in thread
From: jha @ 2017-09-29 3:06 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 09773850.zip --]
[-- Type: application/zip, Size: 7115 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 7:44 amin
0 siblings, 0 replies; 2775+ messages in thread
From: amin @ 2017-09-29 7:44 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 7475658.zip --]
[-- Type: application/zip, Size: 7277 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 11:28 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2017-09-29 11:28 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: 810795425922.zip --]
[-- Type: application/zip, Size: 7224 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 11:49 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-09-29 11:49 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 84914924.zip --]
[-- Type: application/zip, Size: 7285 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 14:47 nelcastellodicarta
0 siblings, 0 replies; 2775+ messages in thread
From: nelcastellodicarta @ 2017-09-29 14:47 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 55645769.zip --]
[-- Type: application/zip, Size: 7222 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 15:21 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-09-29 15:21 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 033033737342463.zip --]
[-- Type: application/zip, Size: 7234 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 15:42 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-09-29 15:42 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 87244.zip --]
[-- Type: application/zip, Size: 7226 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 18:01 clasico082
0 siblings, 0 replies; 2775+ messages in thread
From: clasico082 @ 2017-09-29 18:01 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 587629173792972.zip --]
[-- Type: application/zip, Size: 7177 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-29 21:29 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-09-29 21:29 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 6897516.zip --]
[-- Type: application/zip, Size: 7285 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-09-30 14:07 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-09-30 14:07 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 5283737024430.zip --]
[-- Type: application/zip, Size: 7153 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-02 15:35 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-10-02 15:35 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 78524186237.zip --]
[-- Type: application/zip, Size: 6576 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-02 17:38 nbensoncole81
0 siblings, 0 replies; 2775+ messages in thread
From: nbensoncole81 @ 2017-10-02 17:38 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 3533773208567.zip --]
[-- Type: application/zip, Size: 7192 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-02 18:00 Solen win2
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win2 @ 2017-10-02 18:00 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 23 bytes --]
Solenwin@freshdesk.com
[-- Attachment #1.2: Type: text/html, Size: 141 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-02 18:06 dengx
0 siblings, 0 replies; 2775+ messages in thread
From: dengx @ 2017-10-02 18:06 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 64703085.zip --]
[-- Type: application/zip, Size: 7218 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-02 20:31 kchristopher
0 siblings, 0 replies; 2775+ messages in thread
From: kchristopher @ 2017-10-02 20:31 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 11465.zip --]
[-- Type: application/zip, Size: 7245 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-03 0:03 noord-holland
0 siblings, 0 replies; 2775+ messages in thread
From: noord-holland @ 2017-10-03 0:03 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 720896700956.zip --]
[-- Type: application/zip, Size: 7174 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-03 0:14 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-10-03 0:14 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 48132932.zip --]
[-- Type: application/zip, Size: 7121 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-03 0:55 jbmplupus-Mmb7MZpHnFY
0 siblings, 0 replies; 2775+ messages in thread
From: jbmplupus-Mmb7MZpHnFY @ 2017-10-03 0:55 UTC (permalink / raw)
To: linux-man-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 04825923229.zip --]
[-- Type: application/zip, Size: 7337 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-03 7:38 angers
0 siblings, 0 replies; 2775+ messages in thread
From: angers @ 2017-10-03 7:38 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 37798876552.zip --]
[-- Type: application/zip, Size: 7331 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-03 8:40 koopk
0 siblings, 0 replies; 2775+ messages in thread
From: koopk @ 2017-10-03 8:40 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 398451844542478.zip --]
[-- Type: application/zip, Size: 7173 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-03 10:37 edo.hlaca
0 siblings, 0 replies; 2775+ messages in thread
From: edo.hlaca @ 2017-10-03 10:37 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 951127.zip --]
[-- Type: application/zip, Size: 7235 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-03 13:59 nelcastellodicarta
0 siblings, 0 replies; 2775+ messages in thread
From: nelcastellodicarta @ 2017-10-03 13:59 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 1062465982.zip --]
[-- Type: application/zip, Size: 7191 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-04 11:44 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-10-04 11:44 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 18225093198369.zip --]
[-- Type: application/zip, Size: 7229 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-04 15:33 membership
0 siblings, 0 replies; 2775+ messages in thread
From: membership @ 2017-10-04 15:33 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: 1060824159.zip --]
[-- Type: application/zip, Size: 5425 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-04 16:11 1.10.0812112155390.21775
0 siblings, 0 replies; 2775+ messages in thread
From: 1.10.0812112155390.21775 @ 2017-10-04 16:11 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 2649741863647.zip --]
[-- Type: application/zip, Size: 7246 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-05 7:10 mgriffit
0 siblings, 0 replies; 2775+ messages in thread
From: mgriffit @ 2017-10-05 7:10 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: INFO_22673_linux-ide.zip --]
[-- Type: application/zip, Size: 7245 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-05 10:20 jeffrey.faulkenberg
0 siblings, 0 replies; 2775+ messages in thread
From: jeffrey.faulkenberg @ 2017-10-05 10:20 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: SHOP-92491235258linux-ext4.zip --]
[-- Type: application/zip, Size: 7271 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-06 1:43 sophie.norman
0 siblings, 0 replies; 2775+ messages in thread
From: sophie.norman @ 2017-10-06 1:43 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: MESSAGE-7301268934netfilter-devel.zip --]
[-- Type: application/zip, Size: 7238 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-06 1:59 edo.hlaca
0 siblings, 0 replies; 2775+ messages in thread
From: edo.hlaca @ 2017-10-06 1:59 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: NATASHA-75526540507909netfilter-devel.zip --]
[-- Type: application/zip, Size: 7283 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-06 2:19 sherrilyn
0 siblings, 0 replies; 2775+ messages in thread
From: sherrilyn @ 2017-10-06 2:19 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: ONLINE-333670114381linux-arch.zip --]
[-- Type: application/zip, Size: 7228 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-06 5:16 nelcastellodicarta
0 siblings, 0 replies; 2775+ messages in thread
From: nelcastellodicarta @ 2017-10-06 5:16 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: OLGA-547702238973419linux-scsi.zip --]
[-- Type: application/zip, Size: 7273 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-06 8:31 smallgroups
0 siblings, 0 replies; 2775+ messages in thread
From: smallgroups @ 2017-10-06 8:31 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: MICROSOFT-68816linux-crypto.zip --]
[-- Type: application/zip, Size: 7247 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-06 11:55 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-10-06 11:55 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: BUY-517182571linux-acpi.zip --]
[-- Type: application/zip, Size: 7281 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-07 0:31 carmen.croonquist
0 siblings, 0 replies; 2775+ messages in thread
From: carmen.croonquist @ 2017-10-07 0:31 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 12905.zip --]
[-- Type: application/zip, Size: 7378 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 1:26 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-10-08 1:26 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 9108707.zip --]
[-- Type: application/zip, Size: 7119 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 7:32 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2017-10-08 7:32 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: 3534680.zip --]
[-- Type: application/zip, Size: 7324 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 7:59 edo.hlaca
0 siblings, 0 replies; 2775+ messages in thread
From: edo.hlaca @ 2017-10-08 7:59 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 7052236502429.zip --]
[-- Type: application/zip, Size: 7208 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 9:00 pekka.enne
0 siblings, 0 replies; 2775+ messages in thread
From: pekka.enne @ 2017-10-08 9:00 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 50948.zip --]
[-- Type: application/zip, Size: 7245 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 11:08 nelcastellodicarta
0 siblings, 0 replies; 2775+ messages in thread
From: nelcastellodicarta @ 2017-10-08 11:08 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 354549.zip --]
[-- Type: application/zip, Size: 7203 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 14:15 clasico082
0 siblings, 0 replies; 2775+ messages in thread
From: clasico082 @ 2017-10-08 14:15 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 01777909.zip --]
[-- Type: application/zip, Size: 7221 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 19:00 matthias.foerster
0 siblings, 0 replies; 2775+ messages in thread
From: matthias.foerster @ 2017-10-08 19:00 UTC (permalink / raw)
To: dash
[-- Attachment #1: 434071651431.zip --]
[-- Type: application/zip, Size: 7308 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 22:32 natasha.glauser
0 siblings, 0 replies; 2775+ messages in thread
From: natasha.glauser @ 2017-10-08 22:32 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 7210184386.zip --]
[-- Type: application/zip, Size: 7244 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-08 23:01 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-10-08 23:01 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 7646074810541.zip --]
[-- Type: application/zip, Size: 7348 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-09 3:44 roeper
0 siblings, 0 replies; 2775+ messages in thread
From: roeper @ 2017-10-09 3:44 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 417841081322055.zip --]
[-- Type: application/zip, Size: 7265 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-09 6:17 durrant
0 siblings, 0 replies; 2775+ messages in thread
From: durrant @ 2017-10-09 6:17 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 593592994.zip --]
[-- Type: application/zip, Size: 7328 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-09 7:37 Michael Lyle
0 siblings, 0 replies; 2775+ messages in thread
From: Michael Lyle @ 2017-10-09 7:37 UTC (permalink / raw)
To: linux-bcache, linux-block; +Cc: colyli
[PATCH v2 1/2] bcache: writeback rate shouldn't artifically clamp
[PATCH v2 2/2] bcache: rearrange writeback main thread ratelimit
This is a reroll of the previous "don't clamp" patch. It corrects
type issues where negative numbers were handled badly (mostly for
display in writeback_rate_debug).
Additionally, a new, related patch-- during scanning for dirty
blocks, don't reset the ratelimiting counter. This can prevent
undershoots/overshoots of the target rate relating to scanning.
Mike
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-09 13:19 carmen.croonquist
0 siblings, 0 replies; 2775+ messages in thread
From: carmen.croonquist @ 2017-10-09 13:19 UTC (permalink / raw)
To: linux-samsung-soc
[-- Attachment #1: 20689.zip --]
[-- Type: application/zip, Size: 7234 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-09 15:06 jha
0 siblings, 0 replies; 2775+ messages in thread
From: jha @ 2017-10-09 15:06 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 879807.zip --]
[-- Type: application/zip, Size: 7253 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-10 23:27 editor
0 siblings, 0 replies; 2775+ messages in thread
From: editor @ 2017-10-10 23:27 UTC (permalink / raw)
To: linux-ext4
[-- Attachment #1: 6274763896.zip --]
[-- Type: application/zip, Size: 6037 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-11 7:34 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2017-10-11 7:34 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: 12752943587877.zip --]
[-- Type: application/zip, Size: 2795 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-11 8:20 sherrilyn
0 siblings, 0 replies; 2775+ messages in thread
From: sherrilyn @ 2017-10-11 8:20 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 00401005801.zip --]
[-- Type: application/zip, Size: 2799 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-11 9:19 pekka.enne
0 siblings, 0 replies; 2775+ messages in thread
From: pekka.enne @ 2017-10-11 9:19 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 3575697248.zip --]
[-- Type: application/zip, Size: 2799 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-11 11:49 nelcastellodicarta
0 siblings, 0 replies; 2775+ messages in thread
From: nelcastellodicarta @ 2017-10-11 11:49 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 559072852.zip --]
[-- Type: application/zip, Size: 2822 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-11 19:29 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-10-11 19:29 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 85891743224441.zip --]
[-- Type: application/zip, Size: 2775 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-11 22:32 fwkz4811-DoVvmRvd3PAA2dtGD8cC2w
0 siblings, 0 replies; 2775+ messages in thread
From: fwkz4811-DoVvmRvd3PAA2dtGD8cC2w @ 2017-10-11 22:32 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 96920034978.zip --]
[-- Type: application/zip, Size: 2799 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-12 3:08 iker-KvP5wT2u2U0
0 siblings, 0 replies; 2775+ messages in thread
From: iker-KvP5wT2u2U0 @ 2017-10-12 3:08 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 97369885.zip --]
[-- Type: application/zip, Size: 2827 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-12 5:55 xa0et.sirio
0 siblings, 0 replies; 2775+ messages in thread
From: xa0et.sirio @ 2017-10-12 5:55 UTC (permalink / raw)
To: kvm
[-- Attachment #1: 10277430436151.zip --]
[-- Type: application/zip, Size: 2801 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-12 8:17 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-10-12 8:17 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 423180199556284.zip --]
[-- Type: application/zip, Size: 2803 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-12 11:46 sophie.norman
0 siblings, 0 replies; 2775+ messages in thread
From: sophie.norman @ 2017-10-12 11:46 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 80972472247.zip --]
[-- Type: application/zip, Size: 2812 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-12 13:15 mbalhoff
0 siblings, 0 replies; 2775+ messages in thread
From: mbalhoff @ 2017-10-12 13:15 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 5982826813.zip --]
[-- Type: application/zip, Size: 2805 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-12 13:53 Andrew Clement
0 siblings, 0 replies; 2775+ messages in thread
From: Andrew Clement @ 2017-10-12 13:53 UTC (permalink / raw)
I sent a message to you before which i am still waiting for your
respones please do reply me.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-12 14:09 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-10-12 14:09 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 4319450234.zip --]
[-- Type: application/zip, Size: 2801 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-13 6:16 nfrankiyamu
0 siblings, 0 replies; 2775+ messages in thread
From: nfrankiyamu @ 2017-10-13 6:16 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 362936577323.zip --]
[-- Type: application/zip, Size: 3208 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-13 17:15 susan.christian
0 siblings, 0 replies; 2775+ messages in thread
From: susan.christian @ 2017-10-13 17:15 UTC (permalink / raw)
To: platform-driver-x86
[-- Attachment #1: 341777621.zip --]
[-- Type: application/zip, Size: 2835 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-14 6:44 Ella Golan
0 siblings, 0 replies; 2775+ messages in thread
From: Ella Golan @ 2017-10-14 6:44 UTC (permalink / raw)
I am Ms.Ella Golan, I am the Executive Vice President Banking Division with
FIRST INTERNATIONAL BANK OF ISRAEL LTD (FIBI).
I am getting in touch with you regarding an extremely important and urgent
matter. If you would oblige me the opportunity, I shall provide you with
details upon your Response...
Faithfully,
Ms.Ella Golan
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 3:28 redaccion
0 siblings, 0 replies; 2775+ messages in thread
From: redaccion @ 2017-10-15 3:28 UTC (permalink / raw)
To: linux-fsdevel
[-- Attachment #1: 367770.zip --]
[-- Type: application/zip, Size: 2805 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 11:15 cl_luzcc
0 siblings, 0 replies; 2775+ messages in thread
From: cl_luzcc @ 2017-10-15 11:15 UTC (permalink / raw)
To: linux-next
[-- Attachment #1: 211899324.zip --]
[-- Type: application/zip, Size: 2808 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 11:49 edo.hlaca
0 siblings, 0 replies; 2775+ messages in thread
From: edo.hlaca @ 2017-10-15 11:49 UTC (permalink / raw)
To: netfilter-devel
[-- Attachment #1: 808992881895551.zip --]
[-- Type: application/zip, Size: 2799 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 12:04 sherrilyn
0 siblings, 0 replies; 2775+ messages in thread
From: sherrilyn @ 2017-10-15 12:04 UTC (permalink / raw)
To: linux-arch
[-- Attachment #1: 582087541899203.zip --]
[-- Type: application/zip, Size: 2820 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 12:17 Solen win2
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win2 @ 2017-10-15 12:17 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 23 bytes --]
Solenwin@freshdesk.com
[-- Attachment #1.2: Type: text/html, Size: 141 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 13:01 pekka.enne
0 siblings, 0 replies; 2775+ messages in thread
From: pekka.enne @ 2017-10-15 13:01 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 01587514.zip --]
[-- Type: application/zip, Size: 2839 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 15:13 nelcastellodicarta
0 siblings, 0 replies; 2775+ messages in thread
From: nelcastellodicarta @ 2017-10-15 15:13 UTC (permalink / raw)
To: linux-scsi
[-- Attachment #1: 4412770469.zip --]
[-- Type: application/zip, Size: 2798 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 18:29 clasico082
0 siblings, 0 replies; 2775+ messages in thread
From: clasico082 @ 2017-10-15 18:29 UTC (permalink / raw)
To: linux-bcache
[-- Attachment #1: 951043539.zip --]
[-- Type: application/zip, Size: 2779 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-15 22:07 info
0 siblings, 0 replies; 2775+ messages in thread
From: info @ 2017-10-15 22:07 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: 377462.zip --]
[-- Type: application/zip, Size: 2740 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-16 1:23 fwkz4811-DoVvmRvd3PAA2dtGD8cC2w
0 siblings, 0 replies; 2775+ messages in thread
From: fwkz4811-DoVvmRvd3PAA2dtGD8cC2w @ 2017-10-16 1:23 UTC (permalink / raw)
To: linux-cifs-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: 60336090.zip --]
[-- Type: application/zip, Size: 2838 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-16 19:44 iker-KvP5wT2u2U0
0 siblings, 0 replies; 2775+ messages in thread
From: iker-KvP5wT2u2U0 @ 2017-10-16 19:44 UTC (permalink / raw)
To: linux-efi-u79uwXL29TY76Z2rM5mHXA
[-- Attachment #1: EMAILS_091059479495328_linux-efi.zip --]
[-- Type: application/zip, Size: 46090 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-17 0:33 membership
0 siblings, 0 replies; 2775+ messages in thread
From: membership @ 2017-10-17 0:33 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: EMAILS_8042814_linux-crypto.zip --]
[-- Type: application/zip, Size: 46096 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-17 7:00 lswedroe
0 siblings, 0 replies; 2775+ messages in thread
From: lswedroe @ 2017-10-17 7:00 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: EMAILS_540361938616_linux-acpi.zip --]
[-- Type: application/zip, Size: 35488 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-17 12:14 dengx
0 siblings, 0 replies; 2775+ messages in thread
From: dengx @ 2017-10-17 12:14 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 1223614.zip --]
[-- Type: application/zip, Size: 35489 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-19 22:54 armouralumni
0 siblings, 0 replies; 2775+ messages in thread
From: armouralumni @ 2017-10-19 22:54 UTC (permalink / raw)
To: linux-m68k
[-- Attachment #1: 21687962919146.zip --]
[-- Type: application/zip, Size: 43589 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-20 3:19 dengx
0 siblings, 0 replies; 2775+ messages in thread
From: dengx @ 2017-10-20 3:19 UTC (permalink / raw)
To: linux-ide
[-- Attachment #1: 94585642821.zip --]
[-- Type: application/zip, Size: 43584 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-20 8:42 membership
0 siblings, 0 replies; 2775+ messages in thread
From: membership @ 2017-10-20 8:42 UTC (permalink / raw)
To: linux-crypto
[-- Attachment #1: cinqz.doc --]
[-- Type: application/msword, Size: 86528 bytes --]
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-23 13:52 Intl Agency
0 siblings, 0 replies; 2775+ messages in thread
From: Intl Agency @ 2017-10-23 13:52 UTC (permalink / raw)
Hello Dear,
All data(s) concerning this will be disclosed to you on your
acknowledgment of this mail for security reasons(to avoid copyright
violations). Your beneficiary sum are ready to be transferred to your
bank account, this is very urgent. The sum which was formerly own to
late Mr. Thomas, Precisely Your distance Uncle who has the same
surname with you.
Meanwhile, a man appears before the bank few days ago with a letter,
claiming to be your true representative. Below is the banking detail
which he submitted to the bank claiming to be your bank account
details?
Customer ID : 405002251
Bank name : Axis Bank
Account Name : Whitelake Technology Solutions Pvt. Ltd.
Axis Bank A/c No : 910020027939048
Address : Tuticorin, Tamil Nadu, India
Swift Code : AXISINBB002
IFSC Code - UTIB0000405
Please, do reconfirm and affirm to this office, as a matter of urgency
if this man by name Mr. Shmeal Mustafa, and the bank account detail
provided are truly from you, to enable the bank release and transfer
your fund to you. I expect hearing from you on or before seven (7)
working days starting from today or we shall order payment to the
above provided bank account detail:
Kindly revert to me with the following info's for more details and
clarifications regarding this transaction
Your ... Full Name:
Your ... Age:
Your ... Occupation and position:
Your ... Marital status:
Your private email / phone:
Best Regards,
Frank
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-25 12:10 EG
0 siblings, 0 replies; 2775+ messages in thread
From: EG @ 2017-10-25 12:10 UTC (permalink / raw)
To: Recipients
I am Ms.Ella Golan, I am the Executive Vice President Banking Division with
FIRST INTERNATIONAL BANK OF ISRAEL LTD (FIBI).
I am getting in touch with you regarding an extremely important and urgent
matter. If you would oblige me the opportunity, I shall provide you with
details upon your response.
Faithfully,
Ms.Ella Golan
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-10-29 9:46 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2017-10-29 9:46 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 23 bytes --]
Solenwin@freshdesk.com
[-- Attachment #1.2: Type: text/html, Size: 141 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-01 23:35 Roy Cockrum Foundation
0 siblings, 0 replies; 2775+ messages in thread
From: Roy Cockrum Foundation @ 2017-11-01 23:35 UTC (permalink / raw)
Hallo, Sie machen eine Spende von 4.800.000,00 EUR, ich habe die America Lotto in Amerika im Wert von 259,9 Millionen Dollar gewonnen, und ich gebe einen Teil davon fünf glückliche Menschen und Wohltätigkeits-Häuser in Erinnerung an meine verstorbene Frau, die an Krebs gestorben ist. Kontaktieren Sie mich für weitere Informationen: roycockrum2009@gmail.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-05 3:40 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2017-11-05 3:40 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 9 bytes --]
--
null
[-- Attachment #1.2: Type: text/html, Size: 101 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-06 19:51 Qing Chang
0 siblings, 0 replies; 2775+ messages in thread
From: Qing Chang @ 2017-11-06 19:51 UTC (permalink / raw)
To: linux fsdevel
Hey Linux
http://bit.ly/2y5JOmP
Qing Chang
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-12 15:09 Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Friedrich Mayrhofer @ 2017-11-12 15:09 UTC (permalink / raw)
This is the second time i am sending you this Email.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-12 15:09 Friedrich Mayrhofer
0 siblings, 0 replies; 2775+ messages in thread
From: Friedrich Mayrhofer @ 2017-11-12 15:09 UTC (permalink / raw)
This is the second time i am sending you this Email.
I, Friedrich Mayrhofer Donate $ 1,000,000.00 to You, Email Me
personally for more details.
Regards.
Friedrich Mayrhofer
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-12 15:10 Mitesh Shah
0 siblings, 0 replies; 2775+ messages in thread
From: Mitesh Shah @ 2017-11-12 15:10 UTC (permalink / raw)
To: Linux Sparse
Hi Linux
http://bit.ly/2mgWPIO
;-)
Mitesh
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-13 3:13 Bounced mail
0 siblings, 0 replies; 2775+ messages in thread
From: Bounced mail @ 2017-11-13 3:13 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
The original message was received at Mon, 13 Nov 2017 11:13:14 +0800
from lists.01.org [217.132.172.246]
----- The following addresses had permanent fatal errors -----
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
----- Transcript of session follows -----
while talking to lists.01.org.:
>>> MAIL From:"Bounced mail" <MAILER-DAEMON-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
<<< 501 "Bounced mail" <MAILER-DAEMON-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>... Refused
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2017-11-15 9:18 nanda_kishore_chinna
0 siblings, 0 replies; 2775+ messages in thread
From: nanda_kishore_chinna @ 2017-11-15 9:18 UTC (permalink / raw)
unsubscribe platform-driver-x86
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-15 14:44 Qing Chang
0 siblings, 0 replies; 2775+ messages in thread
From: Qing Chang @ 2017-11-15 14:44 UTC (permalink / raw)
To: linux fsdevel
hi Linux
http://bit.ly/2iXiosH
Qing
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-16 10:18 Michal Hocko
0 siblings, 0 replies; 2775+ messages in thread
From: Michal Hocko @ 2017-11-16 10:18 UTC (permalink / raw)
To: linux-api
Cc: Khalid Aziz, Michael Ellerman, Andrew Morton,
Russell King - ARM Linux, Andrea Arcangeli, linux-mm, LKML,
linux-arch, Abdul Haleem, Joel Stanley, Kees Cook, Michal Hocko
Hi,
this has started as a follow up discussion [1][2] resulting in the
runtime failure caused by hardening patch [3] which removes MAP_FIXED
from the elf loader because MAP_FIXED is inherently dangerous as it
might silently clobber and existing underlying mapping (e.g. stack). The
reason for the failure is that some architectures enforce an alignment
for the given address hint without MAP_FIXED used (e.g. for shared or
file backed mappings).
One way around this would be excluding those archs which do alignment
tricks from the hardening [4]. The patch is really trivial but it has
been objected, rightfully so, that this screams for a more generic
solution. We basically want a non-destructive MAP_FIXED.
The first patch introduced MAP_FIXED_SAFE which enforces the given
address but unlike MAP_FIXED it fails with ENOMEM if the given range
conflicts with an existing one. The flag is introduced as a completely
new flag rather than a MAP_FIXED extension because of the backward
compatibility. We really want a never-clobber semantic even on older
kernels which do not recognize the flag. Unfortunately mmap sucks wrt.
flags evaluation because we do not EINVAL on unknown flags. On those
kernels we would simply use the traditional hint based semantic so the
caller can still get a different address (which sucks) but at least not
silently corrupt an existing mapping. I do not see a good way around
that. Except we won't export expose the new semantic to the userspace at
all. It seems there are users who would like to have something like that
[5], though. Atomic address range probing in the multithreaded programs
sounds like an interesting thing to me as well, although I do not have
any specific usecase in mind.
The second patch simply replaces MAP_FIXED use in elf loader by
MAP_FIXED_SAFE. I believe other places which rely on MAP_FIXED should
follow. Actually real MAP_FIXED usages should be docummented properly
and they should be more of an exception.
Does anybody see any fundamental reasons why this is a wrong approach?
Diffstat says
arch/alpha/include/uapi/asm/mman.h | 2 ++
arch/metag/kernel/process.c | 6 +++++-
arch/mips/include/uapi/asm/mman.h | 2 ++
arch/parisc/include/uapi/asm/mman.h | 2 ++
arch/powerpc/include/uapi/asm/mman.h | 1 +
arch/sparc/include/uapi/asm/mman.h | 1 +
arch/tile/include/uapi/asm/mman.h | 1 +
arch/xtensa/include/uapi/asm/mman.h | 2 ++
fs/binfmt_elf.c | 12 ++++++++----
include/uapi/asm-generic/mman.h | 1 +
mm/mmap.c | 11 +++++++++++
11 files changed, 36 insertions(+), 5 deletions(-)
[1] http://lkml.kernel.org/r/20171107162217.382cd754@canb.auug.org.au
[2] http://lkml.kernel.org/r/1510048229.12079.7.camel@abdul.in.ibm.com
[3] http://lkml.kernel.org/r/20171023082608.6167-1-mhocko@kernel.org
[4] http://lkml.kernel.org/r/20171113094203.aofz2e7kueitk55y@dhcp22.suse.cz
[5] http://lkml.kernel.org/r/87efp1w7vy.fsf@concordia.ellerman.id.au
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-19 20:07 Mitesh Shah
0 siblings, 0 replies; 2775+ messages in thread
From: Mitesh Shah @ 2017-11-19 20:07 UTC (permalink / raw)
To: Linux Sparse
Salutations Linux
http://bit.ly/2ATC9sN
Mitesh Shah
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-11-20 2:36 Robert Wang
0 siblings, 0 replies; 2775+ messages in thread
From: Robert Wang @ 2017-11-20 2:36 UTC (permalink / raw)
To: ceph-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-01 2:56 Post Office
0 siblings, 0 replies; 2775+ messages in thread
From: Post Office @ 2017-12-01 2:56 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
[-- Attachment #1: Type: text/plain, Size: 1403 bytes --]
Spam detection software, running on the system "blaine.gmane.org",
has identified this incoming email as possible spam. The original
message has been attached to this so you can view it or label
similar future email. If you have any questions, see
@@CONTACT_ADDRESS@@ for details.
Content preview: This Message was undeliverable due to the following reason:
Your message was not delivered because the destination computer was not reachable
within the allowed queue period. The amount of time a message is queued before
it is returned depends on local configura- tion parameters. [...]
Content analysis details: (5.7 points, 5.0 required)
pts rule name description
---- ---------------------- --------------------------------------------------
-0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no
trust
[198.145.21.10 listed in list.dnswl.org]
-0.6 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain
-1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1%
[score: 0.0000]
1.4 PYZOR_CHECK Listed in Pyzor (http://pyzor.sf.net/)
2.2 AXB_XMAILER_MIMEOLE_OL_024C2 No description available.
2.6 MSOE_MID_WRONG_CASE No description available.
1.9 FORGED_MUA_OUTLOOK Forged mail pretending to be from MS Outlook
[-- Attachment #2: original message before SpamAssassin --]
[-- Type: message/rfc822, Size: 3458 bytes --]
From: "Post Office" <noreply-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
Subject:
Date: Fri, 1 Dec 2017 10:56:17 +0800
Message-ID: <20171201025154.D9EAF220F3C48-y27Ovi1pjclAfugRpC6u6w@public.gmane.org>
This Message was undeliverable due to the following reason:
Your message was not delivered because the destination computer was
not reachable within the allowed queue period. The amount of time
a message is queued before it is returned depends on local configura-
tion parameters.
Most likely there is a network problem that prevented delivery, but
it is also possible that the computer is turned off, or does not
have a mail system running right now.
Your message was not delivered within 4 days:
Host 44.159.81.28 is not responding.
The following recipients did not receive this message:
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
Please reply to postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
if you feel this message to be in error.
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2017-12-01 14:22 Rein Appeldoorn
0 siblings, 0 replies; 2775+ messages in thread
From: Rein Appeldoorn @ 2017-12-01 14:22 UTC (permalink / raw)
To: linux-can
unsubscribe linux-can
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-12 16:06 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2017-12-12 16:06 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 23 bytes --]
Solenwin@freshdesk.com
[-- Attachment #1.2: Type: text/html, Size: 141 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-14 16:26 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2017-12-14 16:26 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 23 bytes --]
Solenwin@freshdesk.com
[-- Attachment #1.2: Type: text/html, Size: 141 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-17 17:28 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2017-12-17 17:28 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 23 bytes --]
Solenwin@freshdesk.com
[-- Attachment #1.2: Type: text/html, Size: 141 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-23 15:32 柯弼舜
0 siblings, 0 replies; 2775+ messages in thread
From: 柯弼舜 @ 2017-12-23 15:32 UTC (permalink / raw)
To: ceph-devel
subscribe ceph-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-24 2:58 柯弼舜
0 siblings, 0 replies; 2775+ messages in thread
From: 柯弼舜 @ 2017-12-24 2:58 UTC (permalink / raw)
To: ceph-devel
subscribe ceph-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-24 9:07 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2017-12-24 9:07 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 23 bytes --]
Solenwin@freshdesk.com
[-- Attachment #1.2: Type: text/html, Size: 141 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-30 2:10 Arpit Patel
0 siblings, 0 replies; 2775+ messages in thread
From: Arpit Patel @ 2017-12-30 2:10 UTC (permalink / raw)
To: linux scsi
good afternoon Linux
https://goo.gl/P81Ven
Arpit
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2017-12-30 4:37 Adam Richter
0 siblings, 0 replies; 2775+ messages in thread
From: Adam Richter @ 2017-12-30 4:37 UTC (permalink / raw)
To: adam richter2004, barrykendall, containers, ann zhang888,
sca38018
http://durable.daphnevy.com
Adam Richter
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-10 10:27 TimGuo
0 siblings, 0 replies; 2775+ messages in thread
From: TimGuo @ 2018-01-10 10:27 UTC (permalink / raw)
To: tglx, mingo, hpa, mingo, x86, linux-pm, linux-kernel
Cc: brucechang, cooperyan, qiyuanwang, benjaminpan, TimGuo
>From 812522018b0f1d9501fbdda4018be9a6fc9c21bf Mon Sep 17 00:00:00 2001
From: TimGuo <timguo@zhaoxin.com>
Date: Wed, 10 Jan 2018 18:16:33 +0800
Subject: [PATCH] x86/centaur: Mark TSC invariant
Centaur CPU has a constant frequency TSC and that TSC
does not stop in C-States. But because the flags are not set for that CPU
the TSC is treated as non constant frequency and assumed to stop in
C-States, which makes it an unreliable and unusable clock source.
Setting those flags tells the kernel that the TSC is usable, so it will
select it over HPET. The effect of this is that reading time stamps (from
kernel or user space) will be faster and more efficient.
Signed-off-by: TimGuo <timguo@zhaoxin.com>
Acked-by: tglx <tglx@linutronix.de>
---
arch/x86/kernel/cpu/centaur.c | 4 ++++
drivers/acpi/processor_idle.c | 1 +
2 files changed, 5 insertions(+)
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index 68bc6d9..c578cd2 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -106,6 +106,10 @@ static void early_init_centaur(struct cpuinfo_x86 *c)
#ifdef CONFIG_X86_64
set_cpu_cap(c, X86_FEATURE_SYSENTER32);
#endif
+ if (c->x86_power & (1 << 8)) {
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+ set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
+ }
}
static void init_centaur(struct cpuinfo_x86 *c)
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index d50a7b6..5f0071c 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -207,6 +207,7 @@ static void tsc_check_state(int state)
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
case X86_VENDOR_INTEL:
+ case X86_VENDOR_CENTAUR:
/*
* AMD Fam10h TSC will tick in all
* C/P/S0/S1 states when this bit is set.
--
1.9.1
保密声明:
本邮件含有保密或专有信息,仅供指定收件人使用。严禁对本邮件或其内容做任何未经授权的查阅、使用、复制或转发。
CONFIDENTIAL NOTE:
This email contains confidential or legally privileged information and is for the sole use of its intended recipient. Any unauthorized review, use, copying or forwarding of this email or the content of this email is strictly prohibited.
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-01-11 3:22 Active lender@
0 siblings, 0 replies; 2775+ messages in thread
From: Active lender@ @ 2018-01-11 3:22 UTC (permalink / raw)
Schöne Grüße,
Ich bin Frau Adrian Irene von Active Lenders Darlehensfirma bekannt als Active Lending Loan®. Wir bieten alle Arten von Darlehen bei 1% Zinssatz. Wenn Sie ein Darlehen benötigen, kontaktieren Sie uns bitte mit den folgenden Informationen.
Bitte füllen Sie das untenstehende Formular aus und senden Sie es so schnell wie möglich zurück.
Benötigte Menge: .........
Laufzeit des Darlehens: ....
Der Grund für das Darlehen: .....
Wir freuen uns darauf, Ihnen zu helfen. Kontaktieren Sie uns per E-Mail: contact@activeslendinggroup.com
Deine
Frau Adrian Irene
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown)
@ 2018-01-16 2:16 Jack.Ma
0 siblings, 0 replies; 2775+ messages in thread
From: Jack.Ma @ 2018-01-16 2:16 UTC (permalink / raw)
To: netfilter-devel
subscribe netdev
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2018-01-16 2:23 Jack.Ma
0 siblings, 0 replies; 2775+ messages in thread
From: Jack.Ma @ 2018-01-16 2:23 UTC (permalink / raw)
To: netfilter-devel
subscribe netfilter-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-23 13:36 Mr Sheng Li Hung
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Sheng Li Hung @ 2018-01-23 13:36 UTC (permalink / raw)
--
I am Mr.Sheng Li Hung I have a very profitable business proposition for you
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-23 13:54 Mr Sheng Li Hung
0 siblings, 0 replies; 2775+ messages in thread
From: Mr Sheng Li Hung @ 2018-01-23 13:54 UTC (permalink / raw)
--
I am Mr.Sheng Li Hung I have a very profitable business proposition for you
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-25 7:23 tirumalareddy marri
0 siblings, 0 replies; 2775+ messages in thread
From: tirumalareddy marri @ 2018-01-25 7:23 UTC (permalink / raw)
To: linux ext4
Greetings
https://goo.gl/zeTgBc
tirumalareddy marri
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-27 13:25 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-27 13:25 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm-w9fAFgjg1Hs@public.gmane.org )
--
To unsubscribe from this list: send the line "unsubscribe dwarves" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-27 13:48 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-27 13:48 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-28 17:01 whoisthis TG
0 siblings, 0 replies; 2775+ messages in thread
From: whoisthis TG @ 2018-01-28 17:01 UTC (permalink / raw)
To: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
Do it
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-28 17:06 whoisthis TG
0 siblings, 0 replies; 2775+ messages in thread
From: whoisthis TG @ 2018-01-28 17:06 UTC (permalink / raw)
To: containers-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA
He
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 14:17 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 14:17 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm-w9fAFgjg1Hs@public.gmane.org )
--
To unsubscribe from this list: send the line "unsubscribe dwarves" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 16:30 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 16:30 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 16:55 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 16:55 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 17:17 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 17:17 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 17:17 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 17:17 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 17:17 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 17:17 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 17:17 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 17:17 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 17:17 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 17:17 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-01-29 17:17 Jones
0 siblings, 0 replies; 2775+ messages in thread
From: Jones @ 2018-01-29 17:17 UTC (permalink / raw)
This is in regards to an inheritance on your surname, reply back using your email address, stating your full name for more details. Reply to email for info. Email me here ( gertvm@dr.com )
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-02 12:15 Robert Vasek
0 siblings, 0 replies; 2775+ messages in thread
From: Robert Vasek @ 2018-02-02 12:15 UTC (permalink / raw)
To: ceph-devel@vger.kernel.org
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <CALfDnQ8aCTywvhqOBkFv3qQOoME9wvTrKbQq8i8PCPOx2iBp=A@mail.gmail.com>]
* (unknown),
@ 2018-02-08 14:40 Automatic Email Delivery Software
0 siblings, 0 replies; 2775+ messages in thread
From: Automatic Email Delivery Software @ 2018-02-08 14:40 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
The original message was received at Thu, 8 Feb 2018 22:40:15 +0800
from lists.01.org [63.188.95.85]
----- The following addresses had permanent fatal errors -----
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
----- Transcript of session follows -----
while talking to lists.01.org.:
>>> MAIL From:"Automatic Email Delivery Software" <postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
<<< 501 "Automatic Email Delivery Software" <postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>... Refused
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-11 16:07 glolariu
0 siblings, 0 replies; 2775+ messages in thread
From: glolariu @ 2018-02-11 16:07 UTC (permalink / raw)
To: linux man
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=utf-8, Size: 183 bytes --]
Hello Linux https://goo.gl/54LwKT
GlolariuN§²æìr¸yúèØb²X¬¶Ç§vØ^)Þº{.nÇ+·¥{±©âØ^nr¡ö¦zË\x1aëh¨èÚ&¢îý»\x05ËÛÔØï¦v¬Îf\x1dp)¹¹br ê+Ê+zf£¢·h§~Ûiÿûàz¹\x1e®w¥¢¸?¨èÚ&¢)ߢ^[f
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-02-12 1:39 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-12 1:39 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-12 1:39 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-12 1:39 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-12 1:39 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-12 1:39 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-12 1:39 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-12 1:39 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-13 11:58 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2018-02-13 11:58 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 22 bytes --]
solenwin2.zendesk.com
[-- Attachment #1.2: Type: text/html, Size: 139 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-13 22:57 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-13 22:57 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-13 22:57 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-13 22:57 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-13 22:57 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-13 22:57 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-13 22:57 Alfred Cheuk Chow
0 siblings, 0 replies; 2775+ messages in thread
From: Alfred Cheuk Chow @ 2018-02-13 22:57 UTC (permalink / raw)
Good Day,
I am Mr. Alfred Cheuk Yu Chow, the Director for Credit & Marketing Chong
Hing Bank, Hong Kong, Chong Hing Bank Center, 24 Des Voeux Road Central,
Hong Kong. I have a business proposal of $ 38,980,369.00.
All confirmable documents to back up the claims will be made available
to you prior to your acceptance and as soon as I receive your return
mail.
Best Regards,
Alfred Chow.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-13 22:59 Mitesh Shah
0 siblings, 0 replies; 2775+ messages in thread
From: Mitesh Shah @ 2018-02-13 22:59 UTC (permalink / raw)
To: Linux Sparse
hi Linux https://goo.gl/gg9bWT Mitesh Shah
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-17 1:45 Ryan Ellis
0 siblings, 0 replies; 2775+ messages in thread
From: Ryan Ellis @ 2018-02-17 1:45 UTC (permalink / raw)
Hi, I am Ryan. I consider myself an easy-going man,honest and loving person. I am currently looking for a relationship in which i feel loved.
Please tell me more about yourself, if you do not mind.
Regards,
Ryan Ellis.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-17 8:41 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2018-02-17 8:41 UTC (permalink / raw)
To: Virtualization
[-- Attachment #1.1: Type: text/plain, Size: 8 bytes --]
Confirm
[-- Attachment #1.2: Type: text/html, Size: 30 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-17 15:29 Ahmed Soliman
0 siblings, 0 replies; 2775+ messages in thread
From: Ahmed Soliman @ 2018-02-17 15:29 UTC (permalink / raw)
To: kvm
subscribe kvm
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-02-23 15:54 Adam Richter
0 siblings, 0 replies; 2775+ messages in thread
From: Adam Richter @ 2018-02-23 15:54 UTC (permalink / raw)
To: zh1001, FRoss Perry, alexander deucher, adam richter2004,
barrykendall, containers, ann zhang888, sca38018, westglen, scott
http://add.chattanooga360.com
Adam Richter
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <[PATCH xf86-video-amdgpu 0/3] Add non-desktop and leasing support>]
* (unknown)
@ 2018-03-05 17:06 Meghana Madhyastha
0 siblings, 0 replies; 2775+ messages in thread
From: Meghana Madhyastha @ 2018-03-05 17:06 UTC (permalink / raw)
To: Noralf Trønnes, Daniel Vetter, dri-devel
linux-spi@vger.kernel.org,Noralf Trønnes <noralf@tronnes.org>,Sean Paul <seanpaul@chromium.org>,kernel@martin.sperl.org
Cc:
Bcc:
Subject: Re: [PATCH v2 0/2] Chunk splitting of spi transfers
Reply-To:
In-Reply-To: <f6dbf3ca-4c1b-90cc-c4af-8889f7407180@tronnes.org>
On Sun, Mar 04, 2018 at 06:38:42PM +0100, Noralf Trønnes wrote:
>
> Den 02.03.2018 12.11, skrev Meghana Madhyastha:
> >On Sun, Feb 25, 2018 at 02:19:10PM +0100, Lukas Wunner wrote:
> >>[cc += linux-rpi-kernel@lists.infradead.org]
> >>
> >>On Sat, Feb 24, 2018 at 06:15:59PM +0000, Meghana Madhyastha wrote:
> >>>I've added bcm2835_spi_transfer_one_message in spi-bcm2835. This calls
> >>>spi_split_transfers_maxsize to split large chunks for spi dma transfers.
> >>>I then removed chunk splitting in the tinydrm spi helper (as now the core
> >>>is handling the chunk splitting). However, although the SPI HW should be
> >>>able to accomodate up to 65535 bytes for dma transfers, the splitting of
> >>>chunks to 65535 bytes results in a dma transfer time out error. However,
> >>>when the chunks are split to < 64 bytes it seems to work fine.
> >>Hm, that is really odd, how did you test this exactly, what did you
> >>use as SPI slave? It contradicts our own experience, we're using
> >>Micrel KSZ8851 Ethernet chips as SPI slave on spi0 of a BCM2837
> >>and can send/receive messages via DMA to the tune of several hundred
> >>bytes without any issues. In fact, for messages < 96 bytes, DMA is
> >>not used at all, so you've probably been using interrupt mode,
> >>see the BCM2835_SPI_DMA_MIN_LENGTH macro in spi-bcm2835.c.
> >Hi Lukas,
> >
> >I think you are right. I checked it and its not using the DMA mode which
> >is why its working with 64 bytes.
> >Noralf, that leaves us back to the
> >initial time out problem. I've tried doing the message splitting in
> >spi_sync as well as spi_pump_messages. Martin had explained that DMA
> >will wait for
> >the SPI HW to set the send_more_data line, but the SPI-HW itself will
> >stop triggering it when SPI_LEN is 0 causing DMA to wait forever. I
> >thought if we split it before itself, the SPI_LEN will not go to zero
> >thus preventing this problem, however it didn't work and started
> >hanging. So I'm a little uncertain as to how to proceed and debug what
> >exactly has caused the time out due to the asynchronous methods.
>
> I did a quick test and at least this is working:
>
> int tinydrm_spi_transfer(struct spi_device *spi, u32 speed_hz,
> struct spi_transfer *header, u8 bpw, const void *buf,
> size_t len)
> {
> struct spi_transfer tr = {
> .bits_per_word = bpw,
> .speed_hz = speed_hz,
> .tx_buf = buf,
> .len = len,
> };
> struct spi_message m;
> size_t maxsize;
> int ret;
>
> maxsize = tinydrm_spi_max_transfer_size(spi, 0);
>
> if (drm_debug & DRM_UT_DRIVER)
> pr_debug("[drm:%s] bpw=%u, maxsize=%zu, transfers:\n",
> __func__, bpw, maxsize);
>
> spi_message_init(&m);
> m.spi = spi;
> if (header)
> spi_message_add_tail(header, &m);
> spi_message_add_tail(&tr, &m);
>
> ret = spi_split_transfers_maxsize(spi->controller, &m, maxsize,
> GFP_KERNEL);
> if (ret)
> return ret;
>
> tinydrm_dbg_spi_message(spi, &m);
>
> return spi_sync(spi, &m);
> }
> EXPORT_SYMBOL(tinydrm_spi_transfer);
>
>
> Log:
> [ 39.015644] [drm:mipi_dbi_fb_dirty [mipi_dbi]] Flushing [FB:36] x1=0,
> x2=320, y1=0, y2=240
>
> [ 39.018079] [drm:mipi_dbi_typec3_command [mipi_dbi]] cmd=2a, par=00 00 01
> 3f
> [ 39.018129] [drm:tinydrm_spi_transfer] bpw=8, maxsize=65532, transfers:
> [ 39.018152] tr(0): speed=10MHz, bpw=8, len=1, tx_buf=[2a]
> [ 39.018231] [drm:tinydrm_spi_transfer] bpw=8, maxsize=65532, transfers:
> [ 39.018248] tr(0): speed=10MHz, bpw=8, len=4, tx_buf=[00 00 01 3f]
>
> [ 39.018330] [drm:mipi_dbi_typec3_command [mipi_dbi]] cmd=2b, par=00 00 00
> ef
> [ 39.018347] [drm:tinydrm_spi_transfer] bpw=8, maxsize=65532, transfers:
> [ 39.018362] tr(0): speed=10MHz, bpw=8, len=1, tx_buf=[2b]
> [ 39.018396] [drm:tinydrm_spi_transfer] bpw=8, maxsize=65532, transfers:
> [ 39.018428] tr(0): speed=10MHz, bpw=8, len=4, tx_buf=[00 00 00 ef]
>
> [ 39.018487] [drm:mipi_dbi_typec3_command [mipi_dbi]] cmd=2c, len=153600
> [ 39.018502] [drm:tinydrm_spi_transfer] bpw=8, maxsize=65532, transfers:
> [ 39.018517] tr(0): speed=10MHz, bpw=8, len=1, tx_buf=[2c]
> [ 39.018565] [drm:tinydrm_spi_transfer] bpw=8, maxsize=65532, transfers:
> [ 39.018594] tr(0): speed=48MHz, bpw=8, len=65532, tx_buf=[c6 18 c6 18
> c6 18 c6 18 c6 18 c6 18 c6 18 c6 18 ...]
> [ 39.018608] tr(1): speed=48MHz, bpw=8, len=65532, tx_buf=[06 18 06 18
> 06 18 06 18 06 18 06 18 06 18 06 18 ...]
> [ 39.018621] tr(2): speed=48MHz, bpw=8, len=22536, tx_buf=[10 82 10 82
> 10 82 10 82 10 82 10 82 18 e3 18 e3 ...]
Hi Noralf,
Yes this works but splitting in the spi subsystem doesn't seem to work.
So this means that spi_split_transfers_maxsize is working.
Should I just send in a patch with splitting done here in tinydrm? (I
had thought we wanted to avoid splitting in the tinydrm helper).
Thanks and regards,
Meghana
>
> Noralf.
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-03-07 7:48 Solen win
0 siblings, 0 replies; 2775+ messages in thread
From: Solen win @ 2018-03-07 7:48 UTC (permalink / raw)
To: virtualization
[-- Attachment #1.1: Type: text/plain, Size: 30 bytes --]
Hi sir
solenwin2.zendesk.com
[-- Attachment #1.2: Type: text/html, Size: 145 bytes --]
[-- Attachment #2: Type: text/plain, Size: 183 bytes --]
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-03-23 3:05 Mail Delivery Subsystem
0 siblings, 0 replies; 2775+ messages in thread
From: Mail Delivery Subsystem @ 2018-03-23 3:05 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
This Message was undeliverable due to the following reason:
Your message was not delivered because the destination computer was
not reachable within the allowed queue period. The amount of time
a message is queued before it is returned depends on local configura-
tion parameters.
Most likely there is a network problem that prevented delivery, but
it is also possible that the computer is turned off, or does not
have a mail system running right now.
Your message was not delivered within 3 days:
Host 160.236.182.197 is not responding.
The following recipients did not receive this message:
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
Please reply to postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
if you feel this message to be in error.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-04-16 1:22 Andrew Worsley
0 siblings, 0 replies; 2775+ messages in thread
From: Andrew Worsley @ 2018-04-16 1:22 UTC (permalink / raw)
To: harinik, APANDEY, asarkar, soren.brinkmann, linux-arm-kernel,
linux-i2c
This patch clears the remaining i2c buffer overrun problems that I see in my
hardware. When run at 200kHz over 2 days and 17 hours there were *NO* faults seen
despite continously accessing the all the i2c devices. I feel the remaining issues
are related to the TPM not behaving properly at clock speeds of 285kHz or higher.
The other i2c hardware is fine up to maximum 400khz. At these higher clock speeds
the TPM appears to fall behind and I see SDA held low after the TPM read and the
driver report bus arbitration lost errors. Eventually the TPM completely stops
responding and SDA is held low. But accessing the other i2c hardware causes more
i2c clock pulses which lets the SDA go high again then the other i2c devices work
with out problems which further confirms our thinking that the TPM is source of the
remaining i2c problems.
With the additional i2c fixes in the attached patch the Xilinx i2c driver
is working with out problems on our hardware. I recommend you consider adding these
changes which apply on top of the previous fixes that I sent.
Thanks
Andrew Worsley
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-04-20 8:02 ` Christoph Hellwig
0 siblings, 0 replies; 2775+ messages in thread
From: Christoph Hellwig @ 2018-04-20 8:02 UTC (permalink / raw)
Cc: linux-arch, linux-xtensa, Michal Simek, Vincent Chen,
linux-c6x-dev, linux-parisc, linux-sh, linux-hexagon,
linux-kernel, linux-m68k, openrisc, Greentime Hu, linux-alpha,
sparclinux, nios2-dev, linux-snps-arc, linux-arm-kernel
To: iommu@lists.linux-foundation.org
Cc: linux-arch@vger.kernel.org
Cc: Michal Simek <monstr@monstr.eu>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-hexagon@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-kernel@vger.kernel.org
Subject: [RFC] common non-cache coherent direct dma mapping ops
Hi all,
this series continues consolidating the dma-mapping code, with a focus
on architectures that do not (always) provide cache coherence for DMA.
Three architectures (arm, mips and powerpc) are still left to be
converted later due to complexity of their dma ops selection.
The dma-noncoherent ops calls the dma-direct ops for the actual
translation of streaming mappins and allow the architecture to provide
any cache flushing required for cpu to device and/or device to cpu
ownership transfers. The dma coherent allocator is for now still left
entirely to architecture supplied implementations due the amount of
variations. Hopefully we can do some consolidation for them later on
as well.
A lot of architectures are currently doing very questionable things
in their dma mapping routines, which are documented in the changelogs
for each patch. Please review them very careful and correct me on
incorrect assumptions.
Because this series sits on top of two previously submitted series
a git tree might be useful to actually test it. It is provided here:
git://git.infradead.org/users/hch/misc.git generic-dma-noncoherent
Gitweb:
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/generic-dma-noncoherent
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown)
@ 2018-04-20 8:02 ` Christoph Hellwig
0 siblings, 0 replies; 2775+ messages in thread
From: Christoph Hellwig @ 2018-04-20 8:02 UTC (permalink / raw)
Cc: linux-arch, linux-xtensa, Michal Simek, Vincent Chen,
linux-c6x-dev, linux-parisc, linux-sh, linux-hexagon,
linux-kernel, linux-m68k, openrisc, Greentime Hu, linux-alpha,
sparclinux, nios2-dev, linux-snps-arc, linux-arm-kernel
To: iommu@lists.linux-foundation.org
Cc: linux-arch@vger.kernel.org
Cc: Michal Simek <monstr@monstr.eu>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-hexagon@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-kernel@vger.kernel.org
Subject: [RFC] common non-cache coherent direct dma mapping ops
Hi all,
this series continues consolidating the dma-mapping code, with a focus
on architectures that do not (always) provide cache coherence for DMA.
Three architectures (arm, mips and powerpc) are still left to be
converted later due to complexity of their dma ops selection.
The dma-noncoherent ops calls the dma-direct ops for the actual
translation of streaming mappins and allow the architecture to provide
any cache flushing required for cpu to device and/or device to cpu
ownership transfers. The dma coherent allocator is for now still left
entirely to architecture supplied implementations due the amount of
variations. Hopefully we can do some consolidation for them later on
as well.
A lot of architectures are currently doing very questionable things
in their dma mapping routines, which are documented in the changelogs
for each patch. Please review them very careful and correct me on
incorrect assumptions.
Because this series sits on top of two previously submitted series
a git tree might be useful to actually test it. It is provided here:
git://git.infradead.org/users/hch/misc.git generic-dma-noncoherent
Gitweb:
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/generic-dma-noncoherent
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-05-25 3:26 Bounced mail
0 siblings, 0 replies; 2775+ messages in thread
From: Bounced mail @ 2018-05-25 3:26 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
The original message was received at Fri, 25 May 2018 11:26:13 +0800
from lists.01.org [137.8.247.250]
----- The following addresses had permanent fatal errors -----
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-05-31 17:11 Adam Richter via Containers
0 siblings, 0 replies; 2775+ messages in thread
From: Adam Richter via Containers @ 2018-05-31 17:11 UTC (permalink / raw)
To: FRoss Perry, alexander deucher, containers, sca38018, westglen
http://voice.promang.net
Adam Richter
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-06-23 21:08 David Lechner
0 siblings, 0 replies; 2775+ messages in thread
From: David Lechner @ 2018-06-23 21:08 UTC (permalink / raw)
To: linux-remoteproc, devicetree, linux-omap, linux-arm-kernel
Cc: David Lechner, Ohad Ben-Cohen, Bjorn Andersson, Rob Herring,
Mark Rutland, Benoît Cousson, Tony Lindgren, Sekhar Nori,
Kevin Hilman, linux-kernel
Date: Sat, 23 Jun 2018 15:43:59 -0500
Subject: [PATCH 0/8] New remoteproc driver for TI PRU
This series adds a new remoteproc driver for the TI Programmable Runtime Unit
(PRU) that is present in some TI Sitara processors. This code has been tested
working on AM1808 (LEGO MINDSTORMS EV3) and AM3358 (BeagleBone Green).
There are a couple of quirks that had to be worked around in order to get this
working. The PRU units have multiple memory maps. Notably, both the instruction
RAM and data RAM are at address 0x0. This caused the da_to_va callback to not
work because the same address could refer to two different locations. To work
around this, the first two patches add a "map" parameter to the da_to_va
callbacks so that we have an extra bit of information to make this distinction.
Also, on AM38xx we have to use pdata for accessing a reset since there is not
a reset controller. There are several other devices doing this, so the seems
the best way for now.
For anyone else who would like to test, I used the rpmsg-client-sample driver.
Just enable it in your kernel config. Then grab the appropriate firmware[1]
and put in in /lib/firmware/. Use sysfs to start and stop the PRU:
echo start > /sys/class/remoteproc<n>/state
echo stop > /sys/class/remoteproc<n>/state
[1]: firmware downloads:
AM18XX: https://github.com/ev3dev/ev3dev-pru-firmware/releases/download/mainline-kernel-testing/AM18xx-PRU-rpmsg-client-sample.zip
AM335X: https://github.com/ev3dev/ev3dev-pru-firmware/releases/download/mainline-kernel-testing/AM335x-PRU-rpmsg-client-sample.zip
David Lechner (8):
remoteproc: add map parameter to da_to_va
remoteproc: add page lookup for TI PRU to ELF loader
ARM: OMAP2+: add pdata quirks for PRUSS reset
dt-bindings: add bindings for TI PRU as remoteproc
remoteproc: new driver for TI PRU
ARM: davinci_all_defconfig: enable PRU remoteproc module
ARM: dts: da850: add node for PRUSS
ARM: dts: am33xx: add node for PRU remoteproc
.../bindings/remoteproc/ti_pru_rproc.txt | 51 ++
MAINTAINERS | 5 +
arch/arm/boot/dts/am33xx.dtsi | 9 +
arch/arm/boot/dts/da850.dtsi | 8 +
arch/arm/configs/davinci_all_defconfig | 2 +
arch/arm/mach-omap2/pdata-quirks.c | 9 +
drivers/remoteproc/Kconfig | 7 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/imx_rproc.c | 2 +-
drivers/remoteproc/keystone_remoteproc.c | 3 +-
drivers/remoteproc/qcom_adsp_pil.c | 2 +-
drivers/remoteproc/qcom_q6v5_pil.c | 2 +-
drivers/remoteproc/qcom_wcnss.c | 2 +-
drivers/remoteproc/remoteproc_core.c | 10 +-
drivers/remoteproc/remoteproc_elf_loader.c | 117 +++-
drivers/remoteproc/remoteproc_internal.h | 2 +-
drivers/remoteproc/st_slim_rproc.c | 2 +-
drivers/remoteproc/ti_pru_rproc.c | 660 ++++++++++++++++++
drivers/remoteproc/wkup_m3_rproc.c | 3 +-
include/linux/platform_data/ti-pruss.h | 18 +
include/linux/remoteproc.h | 2 +-
include/uapi/linux/elf-em.h | 1 +
22 files changed, 899 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/ti_pru_rproc.txt
create mode 100644 drivers/remoteproc/ti_pru_rproc.c
create mode 100644 include/linux/platform_data/ti-pruss.h
--
2.17.1
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-07-05 10:36 rosdi ablatiff
0 siblings, 0 replies; 2775+ messages in thread
From: rosdi ablatiff @ 2018-07-05 10:36 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #1.2: Type: text/html, Size: 1 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2018-07-06 1:26 Dave Airlie
0 siblings, 0 replies; 2775+ messages in thread
From: Dave Airlie @ 2018-07-06 1:26 UTC (permalink / raw)
To: Linus Torvalds; +Cc: LKML, dri-devel
Hi Linus, (apologies for blank body pull earlier)
This is the drm fixes for rc4. It's a bit larger than I'd like but the
exynos cleanups are pretty mechanical, and I'd rather have them in
sooner rather than later so we can avoid too much conflicts around
them. The non-mechanincal exynos changes are mostly fixes for new
feature recently introduced.
i915:
GVT and GGTT mapping fixes
amdgpu:
HDMI2.0 4K@60 Hz regression
Hotplug fixes for dual-GPU laptops to make power management better
Misc vega12 bios fixes, a race fix and some typos.
sii8620 bridge: small fixes around mode setting
core: use kvzalloc to allocate blob property memory.
If the exynos changes are too much, I'm happy to push back, and the
blank pull was thanks to baby induced sleep deprivation, fat fingers
and gmail.
Thanks,
Dave.
drm-fixes-2018-07-06:
amdgpu, i915, exynos, udl, sii8620 and core fixes
The following changes since commit 021c91791a5e7e85c567452f1be3e4c2c6cb6063:
Linux 4.18-rc3 (2018-07-01 16:04:53 -0700)
are available in the Git repository at:
git://anongit.freedesktop.org/drm/drm tags/drm-fixes-2018-07-06
for you to fetch changes up to c78d1f9d95a9f2cd5546c64f5315f54681dd6055:
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into
drm-fixes (2018-07-06 10:47:02 +1000)
----------------------------------------------------------------
amdgpu, i915, exynos, udl, sii8620 and core fixes
----------------------------------------------------------------
Alex Deucher (2):
drm/amdgpu: fix swapped emit_ib_size in vce3
drm/amdgpu/pm: fix display count in non-DC path
Andrzej Pietrasiewicz (1):
drm/exynos: scaler: Reset hardware before starting the operation
Chris Wilson (1):
drm/i915: Try GGTT mmapping whole object as partial
Dave Airlie (4):
Merge tag 'drm-misc-fixes-2018-07-05' of
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Merge tag 'drm-intel-fixes-2018-07-05' of
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Merge branch 'drm-fixes-4.18' of
git://people.freedesktop.org/~agd5f/linux into drm-fixes
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of
git://git.kernel.org/.../daeinki/drm-exynos into drm-fixes
Evan Quan (3):
drm/amd/powerplay: correct vega12 thermal support as true
drm/amd/powerplay: correct vega12 bootup values settings
drm/amd/powerplay: smc_dpm_info structure change
Jani Nikula (1):
Merge tag 'gvt-fixes-2018-07-03' of
https://github.com/intel/gvt-linux into drm-intel-fixes
Lyude Paul (3):
drm/amdgpu: Make struct amdgpu_atif private to amdgpu_acpi.c
drm/amdgpu: Add amdgpu_atpx_get_dhandle()
drm/amdgpu: Dynamically probe for ATIF handle (v2)
Maciej Purski (3):
drm/bridge/sii8620: Send AVI infoframe in all MHL versions
drm/bridge/sii8620: Fix display of packed pixel modes
drm/bridge/sii8620: Fix link mode selection
Marek Szyprowski (10):
drm/exynos: ipp: Rework checking for the correct buffer formats
drm/exynos: rotator: Fix DRM_MODE_REFLECT_{X,Y} interpretation
drm/exynos: scaler: Fix support for YUV420, YUV422 and YUV444 modes
drm/exynos: gsc: Use real buffer width for configuring the hardware
drm/exynos: gsc: Increase Exynos5433 buffer width alignment to 16 pixels
drm/exynos: gsc: Fix DRM_MODE_REFLECT_{X,Y} interpretation
drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modes
drm/exynos: fimc: Use real buffer width for configuring the hardware
drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes
drm/exynos: decon5433: Fix WINCONx reset value
Michel Dänzer (1):
drm: Use kvzalloc for allocating blob property memory
Mikita Lipski (2):
drm/amd/display: adding ycbcr420 pixel encoding for hdmi
drm/amd/display: add a check for display depth validity
Mikulas Patocka (1):
drm/udl: fix display corruption of the last line
Nicolai Hähnle (1):
drm/amdgpu: fix user fence write race condition
Stefan Agner (1):
drm/exynos: ipp: use correct enum type
Thomas Zimmermann (3):
drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functions
drm/exynos: Replace drm_gem_object_unreference_unlocked with put function
drm/exynos: Replace drm_dev_unref with drm_dev_put
Xiaolin Zhang (1):
drm/i915/gvt: changed DDI mode emulation type
Zhao Yan (1):
drm/i915/gvt: fix a bug of partially write ggtt enties
drivers/gpu/drm/amd/amdgpu/amdgpu.h | 46 ++------
drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 131 +++++++++++++++++----
drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 6 +
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 12 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 2 +-
drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 4 +-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 49 +++++++-
drivers/gpu/drm/amd/include/atomfirmware.h | 5 +-
drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.c | 96 +++++++++++++--
drivers/gpu/drm/amd/powerplay/hwmgr/ppatomfwctrl.h | 5 +
drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.c | 4 +
drivers/gpu/drm/amd/powerplay/hwmgr/vega12_hwmgr.h | 3 +
.../amd/powerplay/hwmgr/vega12_processpptables.c | 2 +
.../drm/amd/powerplay/inc/vega12/smu9_driver_if.h | 5 +-
drivers/gpu/drm/bridge/sil-sii8620.c | 86 +++++++++-----
drivers/gpu/drm/drm_property.c | 6 +-
drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 6 +-
drivers/gpu/drm/exynos/exynos_drm_drv.c | 4 +-
drivers/gpu/drm/exynos/exynos_drm_fb.c | 2 +-
drivers/gpu/drm/exynos/exynos_drm_fimc.c | 17 +--
drivers/gpu/drm/exynos/exynos_drm_gem.c | 10 +-
drivers/gpu/drm/exynos/exynos_drm_gsc.c | 51 ++++----
drivers/gpu/drm/exynos/exynos_drm_ipp.c | 110 +++++++++--------
drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +-
drivers/gpu/drm/exynos/exynos_drm_rotator.c | 4 +-
drivers/gpu/drm/exynos/exynos_drm_scaler.c | 44 +++++--
drivers/gpu/drm/exynos/regs-gsc.h | 1 +
drivers/gpu/drm/i915/gvt/display.c | 6 +-
drivers/gpu/drm/i915/gvt/gtt.c | 58 +++++++++
drivers/gpu/drm/i915/gvt/gtt.h | 2 +
drivers/gpu/drm/i915/i915_gem.c | 28 +++--
drivers/gpu/drm/i915/i915_vma.c | 2 +-
drivers/gpu/drm/udl/udl_fb.c | 5 +-
drivers/gpu/drm/udl/udl_transfer.c | 11 +-
34 files changed, 583 insertions(+), 242 deletions(-)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-08-24 4:59 Dave Airlie
0 siblings, 0 replies; 2775+ messages in thread
From: Dave Airlie @ 2018-08-24 4:59 UTC (permalink / raw)
To: Linus Torvalds; +Cc: LKML, dri-devel
Hi Linus,
Just a couple of fixes PRs for rc1,
One MAINTAINERS address change, two panels fixes, and set of amdgpu
fixes (build fixes, display fixes and some others).
Thanks
Dave.
drm-next-2018-08-24:
amdgpu and panel/misc fixes.
The following changes since commit 3d63a3c14741ed015948943076f3c6a2f2cd7b27:
Merge tag 'drm-msm-next-2018-08-10' of
git://people.freedesktop.org/~robclark/linux into drm-next (2018-08-17
10:46:51 +1000)
are available in the Git repository at:
git://anongit.freedesktop.org/drm/drm tags/drm-next-2018-08-24
for you to fetch changes up to 3e20e97c2d55fb18e4b06d16478edc757483b7db:
Merge tag 'drm-misc-next-fixes-2018-08-23-1' of
git://anongit.freedesktop.org/drm/drm-misc into drm-next (2018-08-24
13:41:03 +1000)
----------------------------------------------------------------
amdgpu and panel/misc fixes.
----------------------------------------------------------------
Alex Deucher (1):
drm/amdgpu/display: disable eDP fast boot optimization on DCE8
Christian König (3):
drm/amdgpu: fix incorrect use of fcheck
drm/amdgpu: fix incorrect use of drm_file->pid
drm/amdgpu: fix amdgpu_amdkfd_remove_eviction_fence v3
Dave Airlie (3):
Merge tag 'drm-misc-next-fixes-2018-08-22' of
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Merge branch 'drm-next-4.19' of
git://people.freedesktop.org/~agd5f/linux into drm-next
Merge tag 'drm-misc-next-fixes-2018-08-23-1' of
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Dmytro Laktyushkin (3):
drm/amd/display: fix dp_ss_control vbios flag parsing
drm/amd/display: make dp_ss_off optional
drm/amd/display: fix dentist did ranges
Evan Quan (1):
drm/amdgpu: set correct base for THM/NBIF/MP1 IP
Kai-Heng Feng (1):
drm/edid: Add 6 bpc quirk for SDC panel in Lenovo B50-80
Leo (Sunpeng) Li (2):
Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0
with CONFIG_X86"
drm/amd/display: Don't build DCN1 when kcov is enabled
Samson Tam (1):
drm/amd/display: Do not retain link settings
Sean Paul (2):
drm/panel: simple: tv123wam: Add unprepare delay
MAINTAINERS: drm-misc: Change seanpaul's email address
Yintian Tao (2):
drm/amdgpu: access register without KIQ
drm/powerplay: enable dpm under pass-through
MAINTAINERS | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 103 +++++++++------------
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c | 21 ++---
drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c | 3 +
drivers/gpu/drm/amd/amdgpu/vi.c | 4 +-
drivers/gpu/drm/amd/display/Kconfig | 6 ++
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +-
drivers/gpu/drm/amd/display/dc/Makefile | 2 +-
.../amd/display/dc/bios/command_table_helper2.c | 2 +-
drivers/gpu/drm/amd/display/dc/calcs/Makefile | 2 +-
drivers/gpu/drm/amd/display/dc/core/dc.c | 21 ++++-
drivers/gpu/drm/amd/display/dc/core/dc_debug.c | 2 +-
drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 +-
drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 12 +--
drivers/gpu/drm/amd/display/dc/dc.h | 2 +-
.../gpu/drm/amd/display/dc/dce/dce_clock_source.c | 6 +-
.../gpu/drm/amd/display/dc/dce/dce_clock_source.h | 2 +-
drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c | 18 ++--
drivers/gpu/drm/amd/display/dc/dce/dce_clocks.h | 2 +-
drivers/gpu/drm/amd/display/dc/dce/dce_dmcu.c | 6 +-
.../drm/amd/display/dc/dce/dce_stream_encoder.c | 20 ++--
.../amd/display/dc/dce110/dce110_hw_sequencer.c | 10 +-
drivers/gpu/drm/amd/display/dc/gpio/Makefile | 2 +-
drivers/gpu/drm/amd/display/dc/gpio/hw_factory.c | 4 +-
drivers/gpu/drm/amd/display/dc/gpio/hw_translate.c | 4 +-
drivers/gpu/drm/amd/display/dc/i2caux/Makefile | 2 +-
drivers/gpu/drm/amd/display/dc/i2caux/i2caux.c | 4 +-
drivers/gpu/drm/amd/display/dc/inc/core_types.h | 7 +-
drivers/gpu/drm/amd/display/dc/irq/Makefile | 2 +-
drivers/gpu/drm/amd/display/dc/irq/irq_service.c | 2 +-
drivers/gpu/drm/amd/display/dc/os_types.h | 2 +-
.../gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c | 4 +-
drivers/gpu/drm/drm_edid.c | 3 +
drivers/gpu/drm/panel/panel-simple.c | 3 +
35 files changed, 161 insertions(+), 142 deletions(-)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-08-27 14:50 Christoph Hellwig
0 siblings, 0 replies; 2775+ messages in thread
From: Christoph Hellwig @ 2018-08-27 14:50 UTC (permalink / raw)
To: iommu
Cc: Marek Szyprowski, Robin Murphy, Paul Burton, Greg Kroah-Hartman,
linux-mips, linux-kernel
Subject: [RFC] merge dma_direct_ops and dma_noncoherent_ops
While most architectures are either always or never dma coherent for a
given build, the arm, arm64, mips and soon arc architectures can have
different dma coherent settings on a per-device basis. Additionally
some mips builds can decide at boot time if dma is coherent or not.
I've started to look into handling noncoherent dma in swiotlb, and
moving the dma-iommu ops into common code [1], and for that we need a
generic way to check if a given device is coherent or not. Moving
this flag into struct device also simplifies the conditionally coherent
architecture implementations.
These patches are also available in a git tree given that they have
a few previous posted dependencies:
git://git.infradead.org/users/hch/misc.git dma-direct-noncoherent-merge
Gitweb:
http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/dma-direct-noncoherent-merge
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2018-10-21 16:25 Michael Tirado
0 siblings, 0 replies; 2775+ messages in thread
From: Michael Tirado @ 2018-10-21 16:25 UTC (permalink / raw)
To: Airlied, dri-devel, LKML, kraxel, alexander.deucher,
christian.koenig, David1.zhou, Hongbo.He
Cc: seanpaul, Gustavo, maarten.lankhorst
[-- Attachment #1: Type: text/plain, Size: 5516 bytes --]
Mapping a drm "dumb" buffer fails on 32-bit system (i686) from what
appears to be a truncated memory address that has been copied
throughout several files. The bug manifests as an -EINVAL when calling
mmap with the offset gathered from DRM_IOCTL_MODE_MAP_DUMB <--
DRM_IOCTL_MODE_ADDFB <-- DRM_IOCTL_MODE_CREATE_DUMB. I can provide
test code if needed.
The following patch will apply to 4.18 though I've only been able to
test through qemu bochs driver and nouveau. Intel driver worked
without any issues. I'm not sure if everyone is going to want to
share a constant, and the whitespace is screwed up from gmail's awful
javascript client, so let me know if I should resend this with any
specific changes. I have also attached the file with preserved
whitespace.
--- linux-4.13.8/drivers/gpu/drm/bochs/bochs.h 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/bochs/bochs.h 2017-10-20
14:34:50.308633773 +0000
@@ -115,8 +115,6 @@
return container_of(gem, struct bochs_bo, gem);
}
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static inline u64 bochs_bo_mmap_offset(struct bochs_bo *bo)
{
return drm_vma_node_offset_addr(&bo->bo.vma_node);
--- linux-4.13.8/drivers/gpu/drm/nouveau/nouveau_drv.h 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/nouveau/nouveau_drv.h
2017-10-20 14:34:51.581633751 +0000
@@ -57,8 +57,6 @@
struct nouveau_channel;
struct platform_device;
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
#include "nouveau_fence.h"
#include "nouveau_bios.h"
--- linux-4.13.8/drivers/gpu/drm/ast/ast_drv.h 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/ast/ast_drv.h 2017-10-20
14:34:50.289633773 +0000
@@ -356,8 +356,6 @@
uint32_t handle,
uint64_t *offset);
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
int ast_mm_init(struct ast_private *ast);
void ast_mm_fini(struct ast_private *ast);
--- linux-4.13.8/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c
2017-10-20 14:34:50.644633767 +0000
@@ -21,8 +21,6 @@
#include "hibmc_drm_drv.h"
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static inline struct hibmc_drm_private *
hibmc_bdev(struct ttm_bo_device *bd)
{
--- linux-4.13.8/drivers/gpu/drm/virtio/virtgpu_ttm.c 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/virtio/virtgpu_ttm.c
2017-10-20 14:34:53.055633725 +0000
@@ -37,8 +37,6 @@
#include <linux/delay.h>
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static struct
virtio_gpu_device *virtio_gpu_get_vgdev(struct ttm_bo_device *bdev)
{
--- linux-4.13.8/drivers/gpu/drm/qxl/qxl_drv.h 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/qxl/qxl_drv.h 2017-10-20
14:34:52.072633742 +0000
@@ -88,9 +88,6 @@
} \
} while (0)
-#define DRM_FILE_OFFSET 0x100000000ULL
-#define DRM_FILE_PAGE_OFFSET (DRM_FILE_OFFSET >> PAGE_SHIFT)
-
#define QXL_INTERRUPT_MASK (\
QXL_INTERRUPT_DISPLAY |\
QXL_INTERRUPT_CURSOR |\
--- linux-4.13.8/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
2017-10-20 14:34:43.264633895 +0000
@@ -48,3 +48,1 @@
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
--- linux-4.13.8/drivers/gpu/drm/mgag200/mgag200_drv.h 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/mgag200/mgag200_drv.h
2017-10-20 14:34:51.404633754 +0000
@@ -276,7 +276,6 @@
struct mga_i2c_chan *mgag200_i2c_create(struct drm_device *dev);
void mgag200_i2c_destroy(struct mga_i2c_chan *i2c);
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
void mgag200_ttm_placement(struct mgag200_bo *bo, int domain);
static inline int mgag200_bo_reserve(struct mgag200_bo *bo, bool no_wait)
--- linux-4.13.8/drivers/gpu/drm/radeon/radeon_ttm.c 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/radeon/radeon_ttm.c
2017-10-20 14:34:52.588633733 +0000
@@ -45,8 +45,6 @@
#include "radeon_reg.h"
#include "radeon.h"
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static int radeon_ttm_debugfs_init(struct radeon_device *rdev);
static void radeon_ttm_debugfs_fini(struct radeon_device *rdev);
--- linux-4.13.8/drivers/gpu/drm/cirrus/cirrus_drv.h 2017-10-18
07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/cirrus/cirrus_drv.h
2017-10-20 14:34:50.333633772 +0000
@@ -178,7 +178,6 @@
#define to_cirrus_obj(x) container_of(x, struct cirrus_gem_object, base)
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
/* cirrus_mode.c */
void cirrus_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
--- linux-4.13.8/include/drm/drmP.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/include/drm/drmP.h 2017-10-20
14:35:31.300633060 +0000
@@ -503,4 +503,10 @@
/* helper for handling conditionals in various for_each macros */
#define for_each_if(condition) if (!(condition)) {} else
+#if BITS_PER_LONG == 64
+#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
+#else
+#define DRM_FILE_PAGE_OFFSET (0x10000000ULL >> PAGE_SHIFT)
+#endif
+
#endif
[-- Attachment #2: drm_file_offset.patch --]
[-- Type: application/octet-stream, Size: 4581 bytes --]
--- linux-4.13.8/drivers/gpu/drm/bochs/bochs.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/bochs/bochs.h 2017-10-20 14:34:50.308633773 +0000
@@ -115,8 +115,6 @@
return container_of(gem, struct bochs_bo, gem);
}
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static inline u64 bochs_bo_mmap_offset(struct bochs_bo *bo)
{
return drm_vma_node_offset_addr(&bo->bo.vma_node);
--- linux-4.13.8/drivers/gpu/drm/nouveau/nouveau_drv.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/nouveau/nouveau_drv.h 2017-10-20 14:34:51.581633751 +0000
@@ -57,8 +57,6 @@
struct nouveau_channel;
struct platform_device;
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
#include "nouveau_fence.h"
#include "nouveau_bios.h"
--- linux-4.13.8/drivers/gpu/drm/ast/ast_drv.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/ast/ast_drv.h 2017-10-20 14:34:50.289633773 +0000
@@ -356,8 +356,6 @@
uint32_t handle,
uint64_t *offset);
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
int ast_mm_init(struct ast_private *ast);
void ast_mm_fini(struct ast_private *ast);
--- linux-4.13.8/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/hisilicon/hibmc/hibmc_ttm.c 2017-10-20 14:34:50.644633767 +0000
@@ -21,8 +21,6 @@
#include "hibmc_drm_drv.h"
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static inline struct hibmc_drm_private *
hibmc_bdev(struct ttm_bo_device *bd)
{
--- linux-4.13.8/drivers/gpu/drm/virtio/virtgpu_ttm.c 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/virtio/virtgpu_ttm.c 2017-10-20 14:34:53.055633725 +0000
@@ -37,8 +37,6 @@
#include <linux/delay.h>
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static struct
virtio_gpu_device *virtio_gpu_get_vgdev(struct ttm_bo_device *bdev)
{
--- linux-4.13.8/drivers/gpu/drm/qxl/qxl_drv.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/qxl/qxl_drv.h 2017-10-20 14:34:52.072633742 +0000
@@ -88,9 +88,6 @@
} \
} while (0)
-#define DRM_FILE_OFFSET 0x100000000ULL
-#define DRM_FILE_PAGE_OFFSET (DRM_FILE_OFFSET >> PAGE_SHIFT)
-
#define QXL_INTERRUPT_MASK (\
QXL_INTERRUPT_DISPLAY |\
QXL_INTERRUPT_CURSOR |\
--- linux-4.13.8/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c 2017-10-20 14:34:43.264633895 +0000
@@ -48,3 +48,1 @@
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
--- linux-4.13.8/drivers/gpu/drm/mgag200/mgag200_drv.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/mgag200/mgag200_drv.h 2017-10-20 14:34:51.404633754 +0000
@@ -276,7 +276,6 @@
struct mga_i2c_chan *mgag200_i2c_create(struct drm_device *dev);
void mgag200_i2c_destroy(struct mga_i2c_chan *i2c);
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
void mgag200_ttm_placement(struct mgag200_bo *bo, int domain);
static inline int mgag200_bo_reserve(struct mgag200_bo *bo, bool no_wait)
--- linux-4.13.8/drivers/gpu/drm/radeon/radeon_ttm.c 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/radeon/radeon_ttm.c 2017-10-20 14:34:52.588633733 +0000
@@ -45,8 +45,6 @@
#include "radeon_reg.h"
#include "radeon.h"
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
-
static int radeon_ttm_debugfs_init(struct radeon_device *rdev);
static void radeon_ttm_debugfs_fini(struct radeon_device *rdev);
--- linux-4.13.8/drivers/gpu/drm/cirrus/cirrus_drv.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/drivers/gpu/drm/cirrus/cirrus_drv.h 2017-10-20 14:34:50.333633772 +0000
@@ -178,7 +178,6 @@
#define to_cirrus_obj(x) container_of(x, struct cirrus_gem_object, base)
-#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
/* cirrus_mode.c */
void cirrus_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
--- linux-4.13.8/include/drm/drmP.h 2017-10-18 07:38:33.000000000 +0000
+++ linux-4.13.8-modified/include/drm/drmP.h 2017-10-20 14:35:31.300633060 +0000
@@ -503,4 +503,10 @@
/* helper for handling conditionals in various for_each macros */
#define for_each_if(condition) if (!(condition)) {} else
+#if BITS_PER_LONG == 64
+#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
+#else
+#define DRM_FILE_PAGE_OFFSET (0x10000000ULL >> PAGE_SHIFT)
+#endif
+
#endif
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown),
@ 2019-01-02 12:25 Frank Wunderlich
0 siblings, 0 replies; 2775+ messages in thread
From: Frank Wunderlich @ 2019-01-02 12:25 UTC (permalink / raw)
To: linux-arm-kernel, linux-mediatek
resend to mailing-list because previous attempt was blocked by
non-existing blacklist-filter: https://www.dnsbl.info/dnsbl-njabl-org.php
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown),
@ 2019-01-15 2:55 Jens Axboe
0 siblings, 0 replies; 2775+ messages in thread
From: Jens Axboe @ 2019-01-15 2:55 UTC (permalink / raw)
To: linux-fsdevel, linux-aio, linux-block, linux-arch; +Cc: hch, jmoyer, avi
Here's v4 of the io_uring interface. No user visible changes this
time, outside of bumping the io_uring_sqe submission entry to a
full 64-bytes. This aligns better with caches, and leaves us some
room to grow for future features. See the v3 posting for full
details on the API:
https://lore.kernel.org/linux-block/20190112213011.1439-1-axboe@kernel.dk/
What I neglected to mention in the v3 posting, is that the fixed
buffer and fixed file interfaces are available through the
io_uring_register() system call. This means they can be registered
(and unregistered) independently of the io_uring context setup.
Patches are against 5.0-rc2 and can also be found in my 'io_uring'
git branch:
git://git.kernel.dk/linux-block io_uring
Changes since v3:
- Clean up fixed buffer index validation
- Add IORING_OP_NOP for ring perf testing
- Drop struct io_kiocb ki_* variable prefix, it clashes with struct
kiocb for no reason except to cause confusement
- Bump io_uring_sqe to 64 bytes. Cacheline sized and aligned
(on x86-64), and more future proof
- Use kmalloc_array()
- Make the page mlock rlimit incremental and not for root / CAP_IPC_LOCK
- Ensure io_uring_register() can't race with fops->release()
- Simplify and improve iopoll implementation
- Use FOLL_WRITE instead of open-coding it
- Fix 32-bit vs 64-bit sizing for the io_uring_register() structs
- Added x86 32-bit system calls
- Added 32-bit compat mode
- Rebased on 5.0-rc2
Documentation/filesystems/vfs.txt | 3 +
arch/x86/entry/syscalls/syscall_32.tbl | 3 +
arch/x86/entry/syscalls/syscall_64.tbl | 3 +
block/bio.c | 59 +-
fs/Makefile | 1 +
fs/block_dev.c | 19 +-
fs/file.c | 15 +-
fs/file_table.c | 9 +-
fs/gfs2/file.c | 2 +
fs/io_uring.c | 2072 ++++++++++++++++++++++++
fs/iomap.c | 48 +-
fs/xfs/xfs_file.c | 1 +
include/linux/bio.h | 14 +
include/linux/blk_types.h | 1 +
include/linux/file.h | 2 +
include/linux/fs.h | 6 +-
include/linux/iomap.h | 1 +
include/linux/sched/user.h | 2 +-
include/linux/syscalls.h | 7 +
include/uapi/linux/io_uring.h | 155 ++
init/Kconfig | 9 +
kernel/sys_ni.c | 3 +
22 files changed, 2395 insertions(+), 40 deletions(-)
--
Jens Axboe
--
To unsubscribe, send a message with 'unsubscribe linux-aio' in
the body to majordomo@kvack.org. For more info on Linux AIO,
see: http://www.kvack.org/aio/
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-02-28 3:36 Post Office
0 siblings, 0 replies; 2775+ messages in thread
From: Post Office @ 2019-02-28 3:36 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
This Message was undeliverable due to the following reason:
Your message was not delivered because the destination computer was
not reachable within the allowed queue period. The amount of time
a message is queued before it is returned depends on local configura-
tion parameters.
Most likely there is a network problem that prevented delivery, but
it is also possible that the computer is turned off, or does not
have a mail system running right now.
Your message was not delivered within 1 days:
Host 203.212.202.129 is not responding.
The following recipients did not receive this message:
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
Please reply to postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
if you feel this message to be in error.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-03-01 3:34 Automatic Email Delivery Software
0 siblings, 0 replies; 2775+ messages in thread
From: Automatic Email Delivery Software @ 2019-03-01 3:34 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
Message could not be delivered
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-03-04 3:42 Automatic Email Delivery Software
0 siblings, 0 replies; 2775+ messages in thread
From: Automatic Email Delivery Software @ 2019-03-04 3:42 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 365 bytes --]
±'óÛýpZ·Âu<êZxfvª
T'f
>X90î±Î|
&ì#*~zâý^°a¦ü^Èà£cÐ}øAè;£
¼µ8[èÅ«/øP¬
îÅ®_ÖË««XÉ·íÊ{¼
µöuCÇüöL~½¡±-_÷u¹.(v1OsM:I¿ù>1ÁÕüäuµèé"ËÚÌÞÙs9ùn,(SO)6ö\4_²ñ£¬UNß¿5
<¦ý4øÉüG!gü§´QrÓÀ:<(§9h7jÈø¹iï§eÛðWõxY¼×ü|ëÙÙPýþç»úU] PÝKx]»ÉÎâ÷]mù[ã.ÂÁf;Ô´5ÙtµU`ݵ
ÛÅ£J$kÊ[À´U
ä|"&`»öÔ[»ã$
¨¢Xm¡ÂålJ±
!aÇJÂHpºÆat¬â69½#ßt0k¤I¤|
Z9
¢Zw£[ªûþS
ç²
[-- Attachment #2: Type: text/plain, Size: 178 bytes --]
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown)
@ 2019-03-19 14:41 Maxim Levitsky
0 siblings, 0 replies; 2775+ messages in thread
From: Maxim Levitsky @ 2019-03-19 14:41 UTC (permalink / raw)
To: linux-nvme
Cc: Maxim Levitsky, linux-kernel, kvm, Jens Axboe, Alex Williamson,
Keith Busch, Christoph Hellwig, Sagi Grimberg, Kirti Wankhede,
David S . Miller, Mauro Carvalho Chehab, Greg Kroah-Hartman,
Wolfram Sang, Nicolas Ferre, Paul E . McKenney , Paolo Bonzini,
Liang Cunming, Liu Changpeng, Fam Zheng, Amnon Ilan, John
Date: Tue, 19 Mar 2019 14:45:45 +0200
Subject: [PATCH 0/9] RFC: NVME VFIO mediated device
Hi everyone!
In this patch series, I would like to introduce my take on the problem of doing
as fast as possible virtualization of storage with emphasis on low latency.
In this patch series I implemented a kernel vfio based, mediated device that
allows the user to pass through a partition and/or whole namespace to a guest.
The idea behind this driver is based on paper you can find at
https://www.usenix.org/conference/atc18/presentation/peng,
Although note that I stared the development prior to reading this paper,
independently.
In addition to that implementation is not based on code used in the paper as
I wasn't being able at that time to make the source available to me.
***Key points about the implementation:***
* Polling kernel thread is used. The polling is stopped after a
predefined timeout (1/2 sec by default).
Support for all interrupt driven mode is planned, and it shows promising results.
* Guest sees a standard NVME device - this allows to run guest with
unmodified drivers, for example windows guests.
* The NVMe device is shared between host and guest.
That means that even a single namespace can be split between host
and guest based on different partitions.
* Simple configuration
*** Performance ***
Performance was tested on Intel DC P3700, With Xeon E5-2620 v2
and both latency and throughput is very similar to SPDK.
Soon I will test this on a better server and nvme device and provide
more formal performance numbers.
Latency numbers:
~80ms - spdk with fio plugin on the host.
~84ms - nvme driver on the host
~87ms - mdev-nvme + nvme driver in the guest
Throughput was following similar pattern as well.
* Configuration example
$ modprobe nvme mdev_queues=4
$ modprobe nvme-mdev
$ UUID=$(uuidgen)
$ DEVICE='device pci address'
$ echo $UUID > /sys/bus/pci/devices/$DEVICE/mdev_supported_types/nvme-2Q_V1/create
$ echo n1p3 > /sys/bus/mdev/devices/$UUID/namespaces/add_namespace #attach host namespace 1 parition 3
$ echo 11 > /sys/bus/mdev/devices/$UUID/settings/iothread_cpu #pin the io thread to cpu 11
Afterward boot qemu with
-device vfio-pci,sysfsdev=/sys/bus/mdev/devices/$UUID
Zero configuration on the guest.
*** FAQ ***
* Why to make this in the kernel? Why this is better that SPDK
-> Reuse the existing nvme kernel driver in the host. No new drivers in the guest.
-> Share the NVMe device between host and guest.
Even in fully virtualized configurations,
some partitions of nvme device could be used by guests as block devices
while others passed through with nvme-mdev to achieve balance between
all features of full IO stack emulation and performance.
-> NVME-MDEV is a bit faster due to the fact that in-kernel driver
can send interrupts to the guest directly without a context
switch that can be expensive due to meltdown mitigation.
-> Is able to utilize interrupts to get reasonable performance.
This is only implemented
as a proof of concept and not included in the patches,
but interrupt driven mode shows reasonable performance
-> This is a framework that later can be used to support NVMe devices
with more of the IO virtualization built-in
(IOMMU with PASID support coupled with device that supports it)
* Why to attach directly to nvme-pci driver and not use block layer IO
-> The direct attachment allows for better performance, but I will
check the possibility of using block IO, especially for fabrics drivers.
*** Implementation notes ***
* All guest memory is mapped into the physical nvme device
but not 1:1 as vfio-pci would do this.
This allows very efficient DMA.
To support this, patch 2 adds ability for a mdev device to listen on
guest's memory map events.
Any such memory is immediately pinned and then DMA mapped.
(Support for fabric drivers where this is not possible exits too,
in which case the fabric driver will do its own DMA mapping)
* nvme core driver is modified to announce the appearance
and disappearance of nvme controllers and namespaces,
to which the nvme-mdev driver is subscribed.
* nvme-pci driver is modified to expose raw interface of attaching to
and sending/polling the IO queues.
This allows the mdev driver very efficiently to submit/poll for the IO.
By default one host queue is used per each mediated device.
(support for other fabric based host drivers is planned)
* The nvme-mdev doesn't assume presence of KVM, thus any VFIO user, including
SPDK, a qemu running with tccg, ... can use this virtual device.
*** Testing ***
The device was tested with stock QEMU 3.0 on the host,
with host was using 5.0 kernel with nvme-mdev added and the following hardware:
* QEMU nvme virtual device (with nested guest)
* Intel DC P3700 on Xeon E5-2620 v2 server
* Samsung SM981 (in a Thunderbolt enclosure, with my laptop)
* Lenovo NVME device found in my laptop
The guest was tested with kernel 4.16, 4.18, 4.20 and
the same custom complied kernel 5.0
Windows 10 guest was tested too with both Microsoft's inbox driver and
open source community NVME driver
(https://lists.openfabrics.org/pipermail/nvmewin/2016-December/001420.html)
Testing was mostly done on x86_64, but 32 bit host/guest combination
was lightly tested too.
In addition to that, the virtual device was tested with nested guest,
by passing the virtual device to it,
using pci passthrough, qemu userspace nvme driver, and spdk
PS: I used to contribute to the kernel as a hobby using the
maximlevitsky@gmail.com address
Maxim Levitsky (9):
vfio/mdev: add .request callback
nvme/core: add some more values from the spec
nvme/core: add NVME_CTRL_SUSPENDED controller state
nvme/pci: use the NVME_CTRL_SUSPENDED state
nvme/pci: add known admin effects to augument admin effects log page
nvme/pci: init shadow doorbell after each reset
nvme/core: add mdev interfaces
nvme/core: add nvme-mdev core driver
nvme/pci: implement the mdev external queue allocation interface
MAINTAINERS | 5 +
drivers/nvme/Kconfig | 1 +
drivers/nvme/Makefile | 1 +
drivers/nvme/host/core.c | 149 +++++-
drivers/nvme/host/nvme.h | 55 ++-
drivers/nvme/host/pci.c | 385 ++++++++++++++-
drivers/nvme/mdev/Kconfig | 16 +
drivers/nvme/mdev/Makefile | 5 +
drivers/nvme/mdev/adm.c | 873 ++++++++++++++++++++++++++++++++++
drivers/nvme/mdev/events.c | 142 ++++++
drivers/nvme/mdev/host.c | 491 +++++++++++++++++++
drivers/nvme/mdev/instance.c | 802 +++++++++++++++++++++++++++++++
drivers/nvme/mdev/io.c | 563 ++++++++++++++++++++++
drivers/nvme/mdev/irq.c | 264 ++++++++++
drivers/nvme/mdev/mdev.h | 56 +++
drivers/nvme/mdev/mmio.c | 591 +++++++++++++++++++++++
drivers/nvme/mdev/pci.c | 247 ++++++++++
drivers/nvme/mdev/priv.h | 700 +++++++++++++++++++++++++++
drivers/nvme/mdev/udata.c | 390 +++++++++++++++
drivers/nvme/mdev/vcq.c | 207 ++++++++
drivers/nvme/mdev/vctrl.c | 514 ++++++++++++++++++++
drivers/nvme/mdev/viommu.c | 322 +++++++++++++
drivers/nvme/mdev/vns.c | 356 ++++++++++++++
drivers/nvme/mdev/vsq.c | 178 +++++++
drivers/vfio/mdev/vfio_mdev.c | 11 +
include/linux/mdev.h | 4 +
include/linux/nvme.h | 88 +++-
27 files changed, 7375 insertions(+), 41 deletions(-)
create mode 100644 drivers/nvme/mdev/Kconfig
create mode 100644 drivers/nvme/mdev/Makefile
create mode 100644 drivers/nvme/mdev/adm.c
create mode 100644 drivers/nvme/mdev/events.c
create mode 100644 drivers/nvme/mdev/host.c
create mode 100644 drivers/nvme/mdev/instance.c
create mode 100644 drivers/nvme/mdev/io.c
create mode 100644 drivers/nvme/mdev/irq.c
create mode 100644 drivers/nvme/mdev/mdev.h
create mode 100644 drivers/nvme/mdev/mmio.c
create mode 100644 drivers/nvme/mdev/pci.c
create mode 100644 drivers/nvme/mdev/priv.h
create mode 100644 drivers/nvme/mdev/udata.c
create mode 100644 drivers/nvme/mdev/vcq.c
create mode 100644 drivers/nvme/mdev/vctrl.c
create mode 100644 drivers/nvme/mdev/viommu.c
create mode 100644 drivers/nvme/mdev/vns.c
create mode 100644 drivers/nvme/mdev/vsq.c
--
2.17.2
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown)
@ 2019-03-21 1:51 zhuchangchun
0 siblings, 0 replies; 2775+ messages in thread
From: zhuchangchun @ 2019-03-21 1:51 UTC (permalink / raw)
To: linux-kernel, linux-gpio
subscribe linux-kernel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-03-29 0:36 邀请函
0 siblings, 0 replies; 2775+ messages in thread
From: 邀请函 @ 2019-03-29 0:36 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
-------- 转发邮件信息 --------
发件人:mivczrufz@exu.net
发送日期:2019-3-29 8:36:49
收件人:linux-nvdimm@lists.01.org
~附~件~内~容~请~您~查~阅~
8:36:49
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-04-04 5:56 Mail Delivery Subsystem
0 siblings, 0 replies; 2775+ messages in thread
From: Mail Delivery Subsystem @ 2019-04-04 5:56 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
This Message was undeliverable due to the following reason:
Your message was not delivered because the destination computer was
not reachable within the allowed queue period. The amount of time
a message is queued before it is returned depends on local configura-
tion parameters.
Most likely there is a network problem that prevented delivery, but
it is also possible that the computer is turned off, or does not
have a mail system running right now.
Your message was not delivered within 1 days:
Host 66.24.245.203 is not responding.
The following recipients did not receive this message:
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
Please reply to postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
if you feel this message to be in error.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-04-05 2:38 Changbin Du
0 siblings, 0 replies; 2775+ messages in thread
From: Changbin Du @ 2019-04-05 2:38 UTC (permalink / raw)
To: Jonathan Corbet
Cc: Rafael J. Wysocki, Changbin Du, Rafael J. Wysocki, Len Brown,
ACPI Devel Maling List, Linux Kernel Mailing List,
open list:DOCUMENTATION, Bjorn Helgaas
Bcc:
Subject: Re: [PATCH v2 00/24] Include linux ACPI docs into Sphinx TOC tree
Reply-To:
In-Reply-To: <20190403133613.13f3fd75@lwn.net>
+ Bjorn
On Wed, Apr 03, 2019 at 01:36:13PM -0600, Jonathan Corbet wrote:
> On Tue, 2 Apr 2019 10:25:23 +0200
> "Rafael J. Wysocki" <rafael@kernel.org> wrote:
>
> > There are ACPI-related documents currently in Documentation/acpi/ that
> > don't clearly fall under either driver-api or admin-guide. For
> > example, some of them describe various aspects of the ACPI support
> > subsystem operation and some document expectations with respect to the
> > ACPI tables provided by the firmware etc.
> >
> > Where would you recommend to put them after converting to .rst?
>
> OK, I've done some pondering on this. Maybe what we need is a new
> top-level "hardware guide" book meant to hold information on how the
> hardware works and what the kernel's expectations are. Architecture
> information could maybe go there too. Would this make sense?
>
> If so, I could see a division like this:
>
> Hardware guide
> acpi-lid
> aml-debugger (or maybe driver api?)
> debug (ditto)
> DSD-properties-rules
> gpio-properties
> i2c-muxes
>
> Admin guide
> cppc_sysfs
> initrd_table_override
>
> Driver-API
> enumeration
> scan_handlers
>
> other:
> dsdt-override: find another home for those five lines
>
Then, should we create dedicated sub-directories for these new charpters and
move documents to coresspoding one? Now we have 'admin-guide' and all admin-guid
docs are under it, otherwise we will have reference across different folders.
For example, the 'admin-guide/index.rst' will have:
...
../acpi/osi
...
Which seems not good.
> ...and so on. I've probably gotten at least one of those wrong, but that's
> the idea.
>
> Of course, then it would be nice to better integrate those documents so
> that they fit into a single coherent whole...a guy can dream...:)
>
I am not an adminstrator, so I don't know how adminstrators use this kernel
documentation. But as a kernel developer, I prefer all related documents
integrated into one charpter. Because I probably miss some useful sections
if the documents are distributed into several charpters. And this is usually
how a book is written (One charpter focus on one topic and has sub-sections
such as overview, backgroud knowledge, implemenation details..),
but a book mostly target on hypothetical readers...
> Thanks,
>
> jon
--
Cheers,
Changbin Du
^ permalink raw reply [flat|nested] 2775+ messages in thread* (no subject)
@ 2019-04-10 11:14 Norbert Lange
2019-04-10 13:37 ` (unknown) Jan Kiszka
2019-04-10 14:36 ` (unknown) Jan Kiszka
0 siblings, 2 replies; 2775+ messages in thread
From: Norbert Lange @ 2019-04-10 11:14 UTC (permalink / raw)
To: xenomai
V3 of the patchset, corrected many checkstyle issues,
simplified condvar autoinit.
I did not use ARRAY_SIZE, as that would need another include.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: (unknown)
2019-04-10 11:14 Norbert Lange
@ 2019-04-10 13:37 ` Jan Kiszka
2019-04-10 14:36 ` (unknown) Jan Kiszka
1 sibling, 0 replies; 2775+ messages in thread
From: Jan Kiszka @ 2019-04-10 13:37 UTC (permalink / raw)
To: Norbert Lange, xenomai
On 10.04.19 13:14, Norbert Lange via Xenomai wrote:
> V3 of the patchset, corrected many checkstyle issues,
> simplified condvar autoinit.
>
Thanks for the update!
> I did not use ARRAY_SIZE, as that would need another include.
>
Ah, we do not have this construct in lib/ so far.
There are private ARRAY_LEN macros in lib/analogy/calibration.c and
utils/analogy/analogy_calibrate.h. Well, something that can be consolidates later.
Jan
--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: (unknown)
2019-04-10 11:14 Norbert Lange
2019-04-10 13:37 ` (unknown) Jan Kiszka
@ 2019-04-10 14:36 ` Jan Kiszka
[not found] ` <VI1PR05MB5917B5956F2E9365F10D6539F62E0@VI1PR05MB5917.eurprd05.prod.outlook.com>
1 sibling, 1 reply; 2775+ messages in thread
From: Jan Kiszka @ 2019-04-10 14:36 UTC (permalink / raw)
To: Norbert Lange, xenomai
On 10.04.19 13:14, Norbert Lange via Xenomai wrote:
> V3 of the patchset, corrected many checkstyle issues,
> simplified condvar autoinit.
>
> I did not use ARRAY_SIZE, as that would need another include.
>
All applied now. Patch 1 was not cleanly based on next, though. I think some
local style cleanup was missing.
Jan
--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (no subject)
@ 2019-04-10 11:17 Norbert Lange
2019-04-10 14:15 ` (unknown) Jan Kiszka
0 siblings, 1 reply; 2775+ messages in thread
From: Norbert Lange @ 2019-04-10 11:17 UTC (permalink / raw)
To: xenomai
V2 of the patchset. Fixed checkstyle issues, better identation,
and aded casts to silence (false) pedantic warnings.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* Re: (unknown)
2019-04-10 11:17 Norbert Lange
@ 2019-04-10 14:15 ` Jan Kiszka
0 siblings, 0 replies; 2775+ messages in thread
From: Jan Kiszka @ 2019-04-10 14:15 UTC (permalink / raw)
To: Norbert Lange, xenomai
On 10.04.19 13:17, Norbert Lange via Xenomai wrote:
> V2 of the patchset. Fixed checkstyle issues, better identation,
> and aded casts to silence (false) pedantic warnings.
>
Both applied to next, thanks.
You probably want to edit your cover letter subject as well - or use git
format-patch.
Jan
--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-05-16 3:48 Mail Delivery Subsystem
0 siblings, 0 replies; 2775+ messages in thread
From: Mail Delivery Subsystem @ 2019-05-16 3:48 UTC (permalink / raw)
To: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw
This Message was undeliverable due to the following reason:
Your message was not delivered because the destination computer was
not reachable within the allowed queue period. The amount of time
a message is queued before it is returned depends on local configura-
tion parameters.
Most likely there is a network problem that prevented delivery, but
it is also possible that the computer is turned off, or does not
have a mail system running right now.
Your message was not delivered within 2 days:
Host 81.249.114.149 is not responding.
The following recipients did not receive this message:
<linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org>
Please reply to postmaster-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org
if you feel this message to be in error.
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-05-26 11:51 Thomas Meyer
0 siblings, 0 replies; 2775+ messages in thread
From: Thomas Meyer @ 2019-05-26 11:51 UTC (permalink / raw)
From thomas@m3y3r.de Sun May 26 13:49:04 2019
Subject: [PATCH] drm/omap: Make sure device_id tables are NULL terminated
To: tomi.valkeinen@ti.com, airlied@linux.ie, daniel@ffwll.ch,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Mime-Version: 1.0
Content-Transfer-Encoding: 8bit
X-Patch: Cocci
X-Mailer: DiffSplit
Message-ID: <1558871364611-249425076-1-diffsplit-thomas@m3y3r.de>
References: <1558871364605-1026448693-0-diffsplit-thomas@m3y3r.de>
In-Reply-To: <1558871364605-1026448693-0-diffsplit-thomas@m3y3r.de>
X-Serial-No: 1
Make sure (of/i2c/platform)_device_id tables are NULL terminated.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
---
diff -u -p a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -198,6 +198,7 @@ static const struct of_device_id omapdss
{ .compatible = "toppoly,td028ttec1" },
{ .compatible = "tpo,td028ttec1" },
{ .compatible = "tpo,td043mtea1" },
+ {},
};
static int __init omapdss_boot_init(void)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown)
@ 2019-06-07 0:54 Dave Airlie
0 siblings, 0 replies; 2775+ messages in thread
From: Dave Airlie @ 2019-06-07 0:54 UTC (permalink / raw)
To: Linus Torvalds, Daniel Vetter; +Cc: dri-devel, LKML
Hey Linus,
A small bit more lively this week but not majorly so. I'm away in
Japan next week for family holiday, so I'll be pretty disconnected,
I've asked Daniel to do fixes for the week while I'm out.
core:
- Allow fb changes in async commits (drivers as well)
udmabuf:
- Unmap scatterlist when unmapping udmabuf
komeda:
- oops, dma mapping and warning fixes
arm-hdlcd:
- clock fixes,
- mode validation fix
i915:
- Add a missing Icelake workaround
- GVT - DMA map fault fix and enforcement fixes
Dave.
amdgpu:
- DCE resume fix
- New raven variation updates
drm-fixes-2019-06-07:
drm i915, amdgpu, arm display, atomic update fixes
The following changes since commit f2c7c76c5d0a443053e94adb9f0918fa2fb85c3a:
Linux 5.2-rc3 (2019-06-02 13:55:33 -0700)
are available in the Git repository at:
git://anongit.freedesktop.org/drm/drm tags/drm-fixes-2019-06-07
for you to fetch changes up to e659b4122cf9e0938b80215de6c06823fb4cf796:
Merge tag 'drm-intel-fixes-2019-06-06' of
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes (2019-06-07
10:41:33 +1000)
----------------------------------------------------------------
drm i915, amdgpu, arm display, atomic update fixes
----------------------------------------------------------------
Aleksei Gimbitskii (2):
drm/i915/gvt: Check if cur_pt_type is valid
drm/i915/gvt: Assign NULL to the pointer after memory free.
Chengming Gui (1):
drm/amd/powerplay: add set_power_profile_mode for raven1_refresh
Colin Xu (3):
drm/i915/gvt: Update force-to-nonpriv register whitelist
drm/i915/gvt: Fix GFX_MODE handling
drm/i915/gvt: Fix vGPU CSFE_CHICKEN1_REG mmio handler
Dan Carpenter (1):
drm/komeda: Potential error pointer dereference
Dave Airlie (5):
Merge tag 'drm-intel-fixes-2019-06-03' of
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Merge branch 'drm-fixes-5.2' of
git://people.freedesktop.org/~agd5f/linux into drm-fixes
Merge tag 'drm-misc-fixes-2019-06-05' of
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Merge branch 'malidp-fixes' of git://linux-arm.org/linux-ld into drm-fixes
Merge tag 'drm-intel-fixes-2019-06-06' of
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Gao, Fred (1):
drm/i915/gvt: Fix cmd length of VEB_DI_IECP
Helen Koike (5):
drm/rockchip: fix fb references in async update
drm/amd: fix fb references in async update
drm/msm: fix fb references in async update
drm/vc4: fix fb references in async update
drm: don't block fb changes for async plane updates
Joonas Lahtinen (2):
Merge tag 'gvt-fixes-2019-05-30' of
https://github.com/intel/gvt-linux into drm-intel-fixes
Merge tag 'gvt-fixes-2019-06-05' of
https://github.com/intel/gvt-linux into drm-intel-fixes
Louis Li (1):
drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)
Lowry Li (Arm Technology China) (1):
drm/komeda: fixing of DMA mapping sg segment warning
Lucas Stach (1):
udmabuf: actually unmap the scatterlist
Prike Liang (1):
drm/amd/amdgpu: add RLC firmware to support raven1 refresh
Robin Murphy (2):
drm/arm/hdlcd: Actually validate CRTC modes
drm/arm/hdlcd: Allow a bit of clock tolerance
Tina Zhang (1):
drm/i915/gvt: Initialize intel_gvt_gtt_entry in stack
Tvrtko Ursulin (1):
drm/i915/icl: Add WaDisableBankHangMode
Weinan Li (1):
drm/i915/gvt: add F_CMD_ACCESS flag for wa regs
Wen He (1):
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times
Xiaolin Zhang (1):
drm/i915/gvt: save RING_HEAD into vreg when vgpu switched out
Xiong Zhang (1):
drm/i915/gvt: refine ggtt range validation
YueHaibing (1):
drm/komeda: remove set but not used variable 'kcrtc'
james qian wang (Arm Technology China) (1):
drm/komeda: Constify the usage of komeda_component/pipeline/dev_funcs
drivers/dma-buf/udmabuf.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 12 ++---
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 15 +++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.h | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 4 +-
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 12 ++++-
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +-
drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 1 +
drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c | 31 +++++++++++--
drivers/gpu/drm/amd/powerplay/inc/hwmgr.h | 1 +
.../gpu/drm/arm/display/komeda/d71/d71_component.c | 8 ++--
drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c | 4 +-
drivers/gpu/drm/arm/display/komeda/komeda_crtc.c | 2 +-
drivers/gpu/drm/arm/display/komeda/komeda_dev.c | 6 ++-
drivers/gpu/drm/arm/display/komeda/komeda_dev.h | 8 ++--
.../gpu/drm/arm/display/komeda/komeda_pipeline.c | 4 +-
.../gpu/drm/arm/display/komeda/komeda_pipeline.h | 10 ++---
drivers/gpu/drm/arm/display/komeda/komeda_plane.c | 4 +-
drivers/gpu/drm/arm/hdlcd_crtc.c | 14 +++---
drivers/gpu/drm/arm/malidp_drv.c | 13 +++++-
drivers/gpu/drm/drm_atomic_helper.c | 22 +++++-----
drivers/gpu/drm/i915/gvt/cmd_parser.c | 2 +-
drivers/gpu/drm/i915/gvt/gtt.c | 38 +++++++++++-----
drivers/gpu/drm/i915/gvt/handlers.c | 49 ++++++++++++++++++---
drivers/gpu/drm/i915/gvt/reg.h | 2 +
drivers/gpu/drm/i915/gvt/scheduler.c | 25 +++++++++++
drivers/gpu/drm/i915/gvt/scheduler.h | 1 +
drivers/gpu/drm/i915/i915_reg.h | 3 ++
drivers/gpu/drm/i915/intel_workarounds.c | 6 +++
drivers/gpu/drm/msm/disp/mdp5/mdp5_plane.c | 4 ++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 51 +++++++++++-----------
drivers/gpu/drm/vc4/vc4_plane.c | 2 +-
include/drm/drm_modeset_helper_vtables.h | 8 ++++
33 files changed, 268 insertions(+), 99 deletions(-)
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown)
@ 2019-08-23 2:12 Rob Herring
0 siblings, 0 replies; 2775+ messages in thread
From: Rob Herring @ 2019-08-23 2:12 UTC (permalink / raw)
To: dri-devel
Cc: Maxime Ripard, Tomeu Vizoso, David Airlie, Sean Paul,
Steven Price, Boris Brezillon, Alyssa Rosenzweig, Robin Murphy
Subject: [PATCH v2 0/8] panfrost: Locking and runtime PM fixes
With further testing of recent changes with lockdep and other locking
checks enabled, we've found several bugs in the shrinker code and one
sleep while atomic in panfrost_gem_open(). This series addresses those
issues.
Delaying the unmapping of pages turns out to be a bad idea. Instead we
need to rework panfrost_mmu_unmap() to not do a runtime PM resume which
takes several locks and causes more lockdep warnings. Unfortunately,
there initially appeared to be some mismatches between the runtime PM
state and the h/w. The result is several fixes to the runtime PM
initialization and handling in jobs. With this, the changes to
panfrost_mmu_unmap() are working correctly.
v2:
- Drop already applied 'drm/panfrost: Fix sleeping while atomic in
panfrost_gem_open'
- Runtime PM clean-ups
- Keep panfrost_gem_purge and use mutex_trylock there
- Rework panfrost_mmu_unmap runtime PM
Rob
Rob Herring (8):
drm/panfrost: Fix possible suspend in panfrost_remove
drm/panfrost: Rework runtime PM initialization
drm/panfrost: Hold runtime PM reference until jobs complete
drm/shmem: Do dma_unmap_sg before purging pages
drm/shmem: Use mutex_trylock in drm_gem_shmem_purge
drm/panfrost: Use mutex_trylock in panfrost_gem_purge
drm/panfrost: Rework page table flushing and runtime PM interaction
drm/panfrost: Remove unnecessary flushing from tlb_inv_context
drivers/gpu/drm/drm_gem_shmem_helper.c | 13 ++++-
drivers/gpu/drm/panfrost/panfrost_device.c | 9 ----
drivers/gpu/drm/panfrost/panfrost_drv.c | 16 ++++---
.../gpu/drm/panfrost/panfrost_gem_shrinker.c | 11 +++--
drivers/gpu/drm/panfrost/panfrost_job.c | 16 ++++---
drivers/gpu/drm/panfrost/panfrost_mmu.c | 47 +++++++++----------
include/drm/drm_gem_shmem_helper.h | 2 +-
7 files changed, 59 insertions(+), 55 deletions(-)
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2019-09-12 8:09 Gene Chen
0 siblings, 0 replies; 2775+ messages in thread
From: Gene Chen @ 2019-09-12 8:09 UTC (permalink / raw)
To: matthias.bgg, gene_chen, Wilma.Wu
Cc: linux-arm-kernel, linux-mediatek, linux-kernel
>From 66208ef7fcdb4176bf63cd130b3e3197086ac4b3 Mon Sep 17 00:00:00 2001
From: Gene Chen <gene_chen@mediatek.corp-partner.google.com>
Date: Thu, 22 Aug 2019 14:21:03 +0800
Subject: [PATCH] mfd: mt6360: add pmic mt6360 driver
---
drivers/mfd/Kconfig | 12 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/mt6360-core.c | 463 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 476 insertions(+)
create mode 100644 drivers/mfd/mt6360-core.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f129f96..a422c76 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -862,6 +862,18 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MT6360
+ tristate "Mediatek MT6360 SubPMIC"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C
+ help
+ Say Y here to enable MT6360 PMU/PMIC/LDO functional support.
+ PMU part include charger, flashlight, rgb led
+ PMIC part include 2-channel BUCKs and 2-channel LDOs
+ LDO part include 4-channel LDOs
+
config MFD_MT6397
tristate "MediaTek MT6397 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f026ada..77a8f0b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -241,6 +241,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
+obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
new file mode 100644
index 0000000..d3580618
--- /dev/null
+++ b/drivers/mfd/mt6360-core.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/version.h>
+
+#include <linux/mfd/mt6360.h>
+#include <linux/mfd/mt6360-private.h>
+
+/* reg 0 -> 0 ~ 7 */
+#define MT6360_CHG_TREG_EVT (4)
+#define MT6360_CHG_AICR_EVT (5)
+#define MT6360_CHG_MIVR_EVT (6)
+#define MT6360_PWR_RDY_EVT (7)
+/* REG 1 -> 8 ~ 15 */
+#define MT6360_CHG_BATSYSUV_EVT (9)
+#define MT6360_FLED_CHG_VINOVP_EVT (11)
+#define MT6360_CHG_VSYSUV_EVT (12)
+#define MT6360_CHG_VSYSOV_EVT (13)
+#define MT6360_CHG_VBATOV_EVT (14)
+#define MT6360_CHG_VBUSOV_EVT (15)
+/* REG 2 -> 16 ~ 23 */
+/* REG 3 -> 24 ~ 31 */
+#define MT6360_WD_PMU_DET (25)
+#define MT6360_WD_PMU_DONE (26)
+#define MT6360_CHG_TMRI (27)
+#define MT6360_CHG_ADPBADI (29)
+#define MT6360_CHG_RVPI (30)
+#define MT6360_OTPI (31)
+/* REG 4 -> 32 ~ 39 */
+#define MT6360_CHG_AICCMEASL (32)
+#define MT6360_CHGDET_DONEI (34)
+#define MT6360_WDTMRI (35)
+#define MT6360_SSFINISHI (36)
+#define MT6360_CHG_RECHGI (37)
+#define MT6360_CHG_TERMI (38)
+#define MT6360_CHG_IEOCI (39)
+/* REG 5 -> 40 ~ 47 */
+#define MT6360_PUMPX_DONEI (40)
+#define MT6360_BAT_OVP_ADC_EVT (41)
+#define MT6360_TYPEC_OTP_EVT (42)
+#define MT6360_ADC_WAKEUP_EVT (43)
+#define MT6360_ADC_DONEI (44)
+#define MT6360_BST_BATUVI (45)
+#define MT6360_BST_VBUSOVI (46)
+#define MT6360_BST_OLPI (47)
+/* REG 6 -> 48 ~ 55 */
+#define MT6360_ATTACH_I (48)
+#define MT6360_DETACH_I (49)
+#define MT6360_QC30_STPDONE (51)
+#define MT6360_QC_VBUSDET_DONE (52)
+#define MT6360_HVDCP_DET (53)
+#define MT6360_CHGDETI (54)
+#define MT6360_DCDTI (55)
+/* REG 7 -> 56 ~ 63 */
+#define MT6360_FOD_DONE_EVT (56)
+#define MT6360_FOD_OV_EVT (57)
+#define MT6360_CHRDET_UVP_EVT (58)
+#define MT6360_CHRDET_OVP_EVT (59)
+#define MT6360_CHRDET_EXT_EVT (60)
+#define MT6360_FOD_LR_EVT (61)
+#define MT6360_FOD_HR_EVT (62)
+#define MT6360_FOD_DISCHG_FAIL_EVT (63)
+/* REG 8 -> 64 ~ 71 */
+#define MT6360_USBID_EVT (64)
+#define MT6360_APWDTRST_EVT (65)
+#define MT6360_EN_EVT (66)
+#define MT6360_QONB_RST_EVT (67)
+#define MT6360_MRSTB_EVT (68)
+#define MT6360_OTP_EVT (69)
+#define MT6360_VDDAOV_EVT (70)
+#define MT6360_SYSUV_EVT (71)
+/* REG 9 -> 72 ~ 79 */
+#define MT6360_FLED_STRBPIN_EVT (72)
+#define MT6360_FLED_TORPIN_EVT (73)
+#define MT6360_FLED_TX_EVT (74)
+#define MT6360_FLED_LVF_EVT (75)
+#define MT6360_FLED2_SHORT_EVT (78)
+#define MT6360_FLED1_SHORT_EVT (79)
+/* REG 10 -> 80 ~ 87 */
+#define MT6360_FLED2_STRB_EVT (80)
+#define MT6360_FLED1_STRB_EVT (81)
+#define MT6360_FLED2_STRB_TO_EVT (82)
+#define MT6360_FLED1_STRB_TO_EVT (83)
+#define MT6360_FLED2_TOR_EVT (84)
+#define MT6360_FLED1_TOR_EVT (85)
+/* REG 11 -> 88 ~ 95 */
+/* REG 12 -> 96 ~ 103 */
+#define MT6360_BUCK1_PGB_EVT (96)
+#define MT6360_BUCK1_OC_EVT (100)
+#define MT6360_BUCK1_OV_EVT (101)
+#define MT6360_BUCK1_UV_EVT (102)
+/* REG 13 -> 104 ~ 111 */
+#define MT6360_BUCK2_PGB_EVT (104)
+#define MT6360_BUCK2_OC_EVT (108)
+#define MT6360_BUCK2_OV_EVT (109)
+#define MT6360_BUCK2_UV_EVT (110)
+/* REG 14 -> 112 ~ 119 */
+#define MT6360_LDO1_OC_EVT (113)
+#define MT6360_LDO2_OC_EVT (114)
+#define MT6360_LDO3_OC_EVT (115)
+#define MT6360_LDO5_OC_EVT (117)
+#define MT6360_LDO6_OC_EVT (118)
+#define MT6360_LDO7_OC_EVT (119)
+/* REG 15 -> 120 ~ 127 */
+#define MT6360_LDO1_PGB_EVT (121)
+#define MT6360_LDO2_PGB_EVT (122)
+#define MT6360_LDO3_PGB_EVT (123)
+#define MT6360_LDO5_PGB_EVT (125)
+#define MT6360_LDO6_PGB_EVT (126)
+#define MT6360_LDO7_PGB_EVT (127)
+
+#define MT6360_REGMAP_IRQ_REG(_irq_evt) \
+ REGMAP_IRQ_REG(_irq_evt, (_irq_evt) / 8, BIT((_irq_evt) % 8))
+
+#define MT6360_MFD_CELL(_name) \
+ { \
+ .name = #_name, \
+ .of_compatible = "mediatek," #_name, \
+ .num_resources = ARRAY_SIZE(_name##_resources), \
+ .resources = _name##_resources, \
+ }
+
+static const struct regmap_irq mt6360_pmu_irqs[] = {
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TREG_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_AICR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_MIVR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_PWR_RDY_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_BATSYSUV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_CHG_VINOVP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VSYSUV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VSYSOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VBATOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_VBUSOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_WD_PMU_DET),
+ MT6360_REGMAP_IRQ_REG(MT6360_WD_PMU_DONE),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TMRI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_ADPBADI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_RVPI),
+ MT6360_REGMAP_IRQ_REG(MT6360_OTPI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_AICCMEASL),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHGDET_DONEI),
+ MT6360_REGMAP_IRQ_REG(MT6360_WDTMRI),
+ MT6360_REGMAP_IRQ_REG(MT6360_SSFINISHI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_RECHGI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TERMI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_IEOCI),
+ MT6360_REGMAP_IRQ_REG(MT6360_PUMPX_DONEI),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHG_TREG_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BAT_OVP_ADC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_TYPEC_OTP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_ADC_WAKEUP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_ADC_DONEI),
+ MT6360_REGMAP_IRQ_REG(MT6360_BST_BATUVI),
+ MT6360_REGMAP_IRQ_REG(MT6360_BST_VBUSOVI),
+ MT6360_REGMAP_IRQ_REG(MT6360_BST_OLPI),
+ MT6360_REGMAP_IRQ_REG(MT6360_ATTACH_I),
+ MT6360_REGMAP_IRQ_REG(MT6360_DETACH_I),
+ MT6360_REGMAP_IRQ_REG(MT6360_QC30_STPDONE),
+ MT6360_REGMAP_IRQ_REG(MT6360_QC_VBUSDET_DONE),
+ MT6360_REGMAP_IRQ_REG(MT6360_HVDCP_DET),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHGDETI),
+ MT6360_REGMAP_IRQ_REG(MT6360_DCDTI),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_DONE_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_OV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHRDET_UVP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHRDET_OVP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_CHRDET_EXT_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_LR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_HR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FOD_DISCHG_FAIL_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_USBID_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_APWDTRST_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_EN_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_QONB_RST_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_MRSTB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_OTP_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_VDDAOV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_SYSUV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_STRBPIN_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_TORPIN_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_TX_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED_LVF_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_SHORT_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_SHORT_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_STRB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_STRB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_STRB_TO_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_STRB_TO_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED2_TOR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_FLED1_TOR_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_OV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK1_UV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_OV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_BUCK2_UV_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO1_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO2_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO3_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO5_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO6_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO7_OC_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO1_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO2_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO3_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO5_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO6_PGB_EVT),
+ MT6360_REGMAP_IRQ_REG(MT6360_LDO7_PGB_EVT),
+};
+
+static int mt6360_pmu_handle_post_irq(void *irq_drv_data)
+{
+ struct mt6360_pmu_info *mpi = irq_drv_data;
+
+ return regmap_update_bits(mpi->regmap,
+ MT6360_PMU_IRQ_SET, MT6360_IRQ_RETRIG, MT6360_IRQ_RETRIG);
+}
+
+static const struct regmap_irq_chip mt6360_pmu_irq_chip = {
+ .irqs = mt6360_pmu_irqs,
+ .num_irqs = ARRAY_SIZE(mt6360_pmu_irqs),
+ .num_regs = MT6360_PMU_IRQ_REGNUM,
+ .mask_base = MT6360_PMU_CHG_MASK1,
+ .status_base = MT6360_PMU_CHG_IRQ1,
+ .ack_base = MT6360_PMU_CHG_IRQ1,
+ .init_ack_masked = true,
+ .use_ack = true,
+ .handle_post_irq = mt6360_pmu_handle_post_irq,
+};
+
+static const struct regmap_config mt6360_pmu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MT6360_PMU_MAXREG,
+};
+
+static const struct resource mt6360_adc_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_ADC_DONEI, "adc_donei"),
+};
+
+static const struct resource mt6360_chg_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_TREG_EVT, "chg_treg_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_PWR_RDY_EVT, "pwr_rdy_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_BATSYSUV_EVT, "chg_batsysuv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VSYSUV_EVT, "chg_vsysuv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VSYSOV_EVT, "chg_vsysov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VBATOV_EVT, "chg_vbatov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_VBUSOV_EVT, "chg_vbusov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_AICCMEASL, "chg_aiccmeasl"),
+ DEFINE_RES_IRQ_NAMED(MT6360_WDTMRI, "wdtmri"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_RECHGI, "chg_rechgi"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_TERMI, "chg_termi"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHG_IEOCI, "chg_ieoci"),
+ DEFINE_RES_IRQ_NAMED(MT6360_PUMPX_DONEI, "pumpx_donei"),
+ DEFINE_RES_IRQ_NAMED(MT6360_ATTACH_I, "attach_i"),
+ DEFINE_RES_IRQ_NAMED(MT6360_CHRDET_EXT_EVT, "chrdet_ext_evt"),
+};
+
+static const struct resource mt6360_led_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED_CHG_VINOVP_EVT, "fled_chg_vinovp_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED_LVF_EVT, "fled_lvf_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED2_SHORT_EVT, "fled2_short_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED1_SHORT_EVT, "fled1_short_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED2_STRB_TO_EVT, "fled2_strb_to_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_FLED1_STRB_TO_EVT, "fled1_strb_to_evt"),
+};
+
+static const struct resource mt6360_pmic_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_PGB_EVT, "buck1_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_OC_EVT, "buck1_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_OV_EVT, "buck1_ov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK1_UV_EVT, "buck1_uv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_PGB_EVT, "buck2_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_OC_EVT, "buck2_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_OV_EVT, "buck2_ov_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_UV_EVT, "buck2_uv_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO6_OC_EVT, "ldo6_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO7_OC_EVT, "ldo7_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO6_PGB_EVT, "ldo6_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO7_PGB_EVT, "ldo7_pgb_evt"),
+};
+
+static const struct resource mt6360_ldo_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO1_OC_EVT, "ldo1_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO2_OC_EVT, "ldo2_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO3_OC_EVT, "ldo3_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO5_OC_EVT, "ldo5_oc_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO1_PGB_EVT, "ldo1_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO2_PGB_EVT, "ldo2_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO3_PGB_EVT, "ldo3_pgb_evt"),
+ DEFINE_RES_IRQ_NAMED(MT6360_LDO5_PGB_EVT, "ldo5_pgb_evt"),
+};
+
+static const struct mfd_cell mt6360_devs[] = {
+ MT6360_MFD_CELL(mt6360_adc),
+ MT6360_MFD_CELL(mt6360_chg),
+ MT6360_MFD_CELL(mt6360_led),
+ MT6360_MFD_CELL(mt6360_pmic),
+ MT6360_MFD_CELL(mt6360_ldo),
+ /* tcpc dev */
+ {
+ .name = "mt6360_tcpc",
+ .of_compatible = "mediatek,mt6360_tcpc",
+ },
+};
+
+static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
+ MT6360_PMU_SLAVEID,
+ MT6360_PMIC_SLAVEID,
+ MT6360_LDO_SLAVEID,
+ MT6360_TCPC_SLAVEID,
+};
+
+static int mt6360_pmu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mt6360_pmu_info *mpi;
+ unsigned int reg_data = 0;
+ int i, ret;
+
+ mpi = devm_kzalloc(&client->dev, sizeof(*mpi), GFP_KERNEL);
+ if (!mpi)
+ return -ENOMEM;
+ mpi->dev = &client->dev;
+ i2c_set_clientdata(client, mpi);
+
+ /* regmap regiser */
+ mpi->regmap = devm_regmap_init_i2c(client, &mt6360_pmu_regmap_config);
+ if (IS_ERR(mpi->regmap)) {
+ dev_err(&client->dev, "regmap register fail\n");
+ return PTR_ERR(mpi->regmap);
+ }
+ /* chip id check */
+ ret = regmap_read(mpi->regmap, MT6360_PMU_DEV_INFO, ®_data);
+ if (ret < 0) {
+ dev_err(&client->dev, "device not found\n");
+ return ret;
+ }
+ if ((reg_data & CHIP_VEN_MASK) != CHIP_VEN_MT6360) {
+ dev_err(&client->dev, "not mt6360 chip\n");
+ return -ENODEV;
+ }
+ mpi->chip_rev = reg_data & CHIP_REV_MASK;
+ /* irq register */
+ memcpy(&mpi->irq_chip, &mt6360_pmu_irq_chip, sizeof(mpi->irq_chip));
+ mpi->irq_chip.name = dev_name(&client->dev);
+ mpi->irq_chip.irq_drv_data = mpi;
+ ret = devm_regmap_add_irq_chip(&client->dev, mpi->regmap, client->irq,
+ IRQF_TRIGGER_FALLING, 0, &mpi->irq_chip,
+ &mpi->irq_data);
+ if (ret < 0) {
+ dev_err(&client->dev, "regmap irq chip add fail\n");
+ return ret;
+ }
+ /* new i2c slave device */
+ for (i = 0; i < MT6360_SLAVE_MAX; i++) {
+ if (mt6360_slave_addr[i] == client->addr) {
+ mpi->i2c[i] = client;
+ continue;
+ }
+ mpi->i2c[i] = i2c_new_dummy(client->adapter,
+ mt6360_slave_addr[i]);
+ if (!mpi->i2c[i]) {
+ dev_err(&client->dev, "new i2c dev [%d] fail\n", i);
+ ret = -ENODEV;
+ goto out;
+ }
+ i2c_set_clientdata(mpi->i2c[i], mpi);
+ }
+ /* mfd cell register */
+ ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO,
+ mt6360_devs, ARRAY_SIZE(mt6360_devs), NULL,
+ 0, regmap_irq_get_domain(mpi->irq_data));
+ if (ret < 0) {
+ dev_err(&client->dev, "mfd add cells fail\n");
+ goto out;
+ }
+ dev_info(&client->dev, "Successfully probed\n");
+ return 0;
+out:
+ while (--i >= 0) {
+ if (mpi->i2c[i]->addr == client->addr)
+ continue;
+ i2c_unregister_device(mpi->i2c[i]);
+ }
+ return ret;
+}
+
+static int mt6360_pmu_remove(struct i2c_client *client)
+{
+ struct mt6360_pmu_info *mpi = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < MT6360_SLAVE_MAX; i++) {
+ if (mpi->i2c[i]->addr == client->addr)
+ continue;
+ i2c_unregister_device(mpi->i2c[i]);
+ }
+ return 0;
+}
+
+static int __maybe_unused mt6360_pmu_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(i2c->irq);
+ return 0;
+}
+
+static int __maybe_unused mt6360_pmu_resume(struct device *dev)
+{
+
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(i2c->irq);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mt6360_pmu_pm_ops,
+ mt6360_pmu_suspend, mt6360_pmu_resume);
+
+static const struct of_device_id __maybe_unused mt6360_pmu_of_id[] = {
+ { .compatible = "mediatek,mt6360_pmu", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt6360_pmu_of_id);
+
+static const struct i2c_device_id mt6360_pmu_id[] = {
+ { "mt6360_pmu", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, mt6360_pmu_id);
+
+static struct i2c_driver mt6360_pmu_driver = {
+ .driver = {
+ .name = "mt6360_pmu",
+ .owner = THIS_MODULE,
+ .pm = &mt6360_pmu_pm_ops,
+ .of_match_table = of_match_ptr(mt6360_pmu_of_id),
+ },
+ .probe = mt6360_pmu_probe,
+ .remove = mt6360_pmu_remove,
+ .id_table = mt6360_pmu_id,
+};
+module_i2c_driver(mt6360_pmu_driver);
+
+MODULE_AUTHOR("CY_Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("MT6360 PMU I2C Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
--
1.9.1
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown)
@ 2019-12-12 15:50 周琰杰 (Zhou Yanjie)
0 siblings, 0 replies; 2775+ messages in thread
From: 周琰杰 (Zhou Yanjie) @ 2019-12-12 15:50 UTC (permalink / raw)
To: linux-mips
Cc: linux-kernel, linux-i2c, devicetree, robh+dt, mark.rutland, paul,
paul.burton, paulburton, sernia.zhou, zhenwenjin
Add support for probing i2c driver on the X1000 Soc from Ingenic.
call the corresponding fifo parameter according to the device
model obtained from the devicetree.
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <1187667350.235001.1580574902701.ref@mail.yahoo.com>]
* (unknown)
@ 2020-02-05 8:23 Frau Huan Jlaying
0 siblings, 0 replies; 2775+ messages in thread
From: Frau Huan Jlaying @ 2020-02-05 8:23 UTC (permalink / raw)
--
Schönen Tag,
Ich bin Frau Huan Jlaying, eine Mitarbeiterin der Wing Hang Bank
hier in Hongkong. Kann ich einer Überweisung von 13.991.674 USD
vertrauen? Kontaktieren Sie mich per E-Mail: huanjlaying08@hotmail.com
Grüße
^ permalink raw reply [flat|nested] 2775+ messages in thread* (unknown)
@ 2020-02-11 22:34 Rajat Jain
0 siblings, 0 replies; 2775+ messages in thread
From: Rajat Jain @ 2020-02-11 22:34 UTC (permalink / raw)
To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Mark Brown,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-spi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Evan Green, rajatja-hpIqsD4AKlfQT0dZR+AlfA,
rajatxjain-Re5JQEeQqe8AvxtiuMwx3w, evgreen-hpIqsD4AKlfQT0dZR+AlfA,
shobhit.srivastava-ral2JQCrhuEAvxtiuMwx3w,
porselvan.muthukrishnan-ral2JQCrhuEAvxtiuMwx3w
From: Evan Green <evgreen-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Date: Wed, 29 Jan 2020 13:54:16 -0800
Subject: [PATCH] spi: pxa2xx: Add CS control clock quirk
In some circumstances on Intel LPSS controllers, toggling the LPSS
CS control register doesn't actually cause the CS line to toggle.
This seems to be failure of dynamic clock gating that occurs after
going through a suspend/resume transition, where the controller
is sent through a reset transition. This ruins SPI transactions
that either rely on delay_usecs, or toggle the CS line without
sending data.
Whenever CS is toggled, momentarily set the clock gating register
to "Force On" to poke the controller into acting on CS.
Signed-off-by: Evan Green <evgreen-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Rajat Jain <rajatja-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
---
drivers/spi/spi-pxa2xx.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 4c7a71f0fb3e..2e318158fca9 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -70,6 +70,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");
#define LPSS_CAPS_CS_EN_SHIFT 9
#define LPSS_CAPS_CS_EN_MASK (0xf << LPSS_CAPS_CS_EN_SHIFT)
+#define LPSS_PRIV_CLOCK_GATE 0x38
+#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK 0x3
+#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON 0x3
+
struct lpss_config {
/* LPSS offset from drv_data->ioaddr */
unsigned offset;
@@ -86,6 +90,8 @@ struct lpss_config {
unsigned cs_sel_shift;
unsigned cs_sel_mask;
unsigned cs_num;
+ /* Quirks */
+ unsigned cs_clk_stays_gated : 1;
};
/* Keep these sorted with enum pxa_ssp_type */
@@ -156,6 +162,7 @@ static const struct lpss_config lpss_platforms[] = {
.tx_threshold_hi = 56,
.cs_sel_shift = 8,
.cs_sel_mask = 3 << 8,
+ .cs_clk_stays_gated = true,
},
};
@@ -383,6 +390,22 @@ static void lpss_ssp_cs_control(struct spi_device *spi, bool enable)
else
value |= LPSS_CS_CONTROL_CS_HIGH;
__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
+ if (config->cs_clk_stays_gated) {
+ u32 clkgate;
+
+ /*
+ * Changing CS alone when dynamic clock gating is on won't
+ * actually flip CS at that time. This ruins SPI transfers
+ * that specify delays, or have no data. Toggle the clock mode
+ * to force on briefly to poke the CS pin to move.
+ */
+ clkgate = __lpss_ssp_read_priv(drv_data, LPSS_PRIV_CLOCK_GATE);
+ value = (clkgate & ~LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK) |
+ LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON;
+
+ __lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, value);
+ __lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, clkgate);
+ }
}
static void cs_assert(struct spi_device *spi)
--
2.25.0.225.g125e21ebc7-goog
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown)
@ 2020-02-15 3:25 mprim37 alcorta
0 siblings, 0 replies; 2775+ messages in thread
From: mprim37 alcorta @ 2020-02-15 3:25 UTC (permalink / raw)
--
Hello, my name is Julie Leach, winner of the Power Ball Jackpot in
October 2015.I want to donate $3,000,000 for charity to help you and the
poor children in your community. Send me an email to:
julieleeach@yahoo.com for more information on how to receive my donation
^ permalink raw reply [flat|nested] 2775+ messages in thread
* kernel panic: audit: backlog limit exceeded
@ 2020-02-24 8:18 syzbot
2020-02-24 22:38 ` Paul Moore
0 siblings, 1 reply; 2775+ messages in thread
From: syzbot @ 2020-02-24 8:18 UTC (permalink / raw)
To: a, b.a.t.m.a.n, dan.carpenter, davem, eparis, fzago, gregkh,
john.hammond, linux-audit, linux-kernel, mareklindner, netdev,
paul, sw, syzkaller-bugs
Hello,
syzbot found the following crash on:
HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-kdump-re..
git tree: net
console output: https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000
kernel config: https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16
dashboard link: https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000
The bug was bisected to:
commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri Jul 28 14:42:27 2017 +0000
staging: lustre: lustre: Off by two in lmv_fid2path()
bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000
final crash: https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000
console output: https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000
IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com
Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in lmv_fid2path()")
audit: audit_backlog=13 > audit_backlog_limit=7
audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7
Kernel panic - not syncing: audit: backlog limit exceeded
CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
audit_panic.cold+0x32/0x32 kernel/audit.c:307
audit_log_lost kernel/audit.c:377 [inline]
audit_log_lost+0x8b/0x180 kernel/audit.c:349
audit_log_start kernel/audit.c:1788 [inline]
audit_log_start+0x70e/0x7c0 kernel/audit.c:1745
audit_log+0x95/0x120 kernel/audit.c:2345
xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413
__do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084
do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline]
do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681
nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115
ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline]
ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933
tcp_setsockopt net/ipv4/tcp.c:3165 [inline]
tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159
sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149
__sys_setsockopt+0x261/0x4c0 net/socket.c:2130
__do_sys_setsockopt net/socket.c:2146 [inline]
__se_sys_setsockopt net/socket.c:2143 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x44720a
Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00
RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000
R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0
R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0
Kernel Offset: disabled
Rebooting in 86400 seconds..
---
This bug is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.
syzbot will keep track of this bug report. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
For information about bisection process see: https://goo.gl/tpsmEJ#bisection
syzbot can test patches for this bug, for details see:
https://goo.gl/tpsmEJ#testing-patches
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: kernel panic: audit: backlog limit exceeded
2020-02-24 8:18 kernel panic: audit: backlog limit exceeded syzbot
@ 2020-02-24 22:38 ` Paul Moore
2020-02-24 22:43 ` Eric Paris
0 siblings, 1 reply; 2775+ messages in thread
From: Paul Moore @ 2020-02-24 22:38 UTC (permalink / raw)
To: syzbot
Cc: a, b.a.t.m.a.n, dan.carpenter, davem, Eric Paris, fzago, gregkh,
john.hammond, linux-audit, linux-kernel, mareklindner, netdev, sw,
syzkaller-bugs
On Mon, Feb 24, 2020 at 3:18 AM syzbot
<syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote:
>
> Hello,
>
> syzbot found the following crash on:
>
> HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-kdump-re..
> git tree: net
> console output: https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000
> kernel config: https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16
> dashboard link: https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316
> compiler: gcc (GCC) 9.0.0 20181231 (experimental)
> syz repro: https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000
> C reproducer: https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000
>
> The bug was bisected to:
>
> commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d
> Author: Dan Carpenter <dan.carpenter@oracle.com>
> Date: Fri Jul 28 14:42:27 2017 +0000
>
> staging: lustre: lustre: Off by two in lmv_fid2path()
>
> bisection log: https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000
> final crash: https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000
> console output: https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000
>
> IMPORTANT: if you fix the bug, please add the following tag to the commit:
> Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com
> Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in lmv_fid2path()")
>
> audit: audit_backlog=13 > audit_backlog_limit=7
> audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7
> Kernel panic - not syncing: audit: backlog limit exceeded
> CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x197/0x210 lib/dump_stack.c:118
> panic+0x2e3/0x75c kernel/panic.c:221
> audit_panic.cold+0x32/0x32 kernel/audit.c:307
> audit_log_lost kernel/audit.c:377 [inline]
> audit_log_lost+0x8b/0x180 kernel/audit.c:349
> audit_log_start kernel/audit.c:1788 [inline]
> audit_log_start+0x70e/0x7c0 kernel/audit.c:1745
> audit_log+0x95/0x120 kernel/audit.c:2345
> xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413
> __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084
> do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline]
> do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681
> nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
> nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115
> ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline]
> ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933
> tcp_setsockopt net/ipv4/tcp.c:3165 [inline]
> tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159
> sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149
> __sys_setsockopt+0x261/0x4c0 net/socket.c:2130
> __do_sys_setsockopt net/socket.c:2146 [inline]
> __se_sys_setsockopt net/socket.c:2143 [inline]
> __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143
> do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
> entry_SYSCALL_64_after_hwframe+0x49/0xbe
> RIP: 0033:0x44720a
> Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0 fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00
> RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX: 0000000000000036
> RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a
> RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
> RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000
> R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0
> R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0
> Kernel Offset: disabled
> Rebooting in 86400 seconds..
>
>
> ---
> This bug is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@googlegroups.com.
>
> syzbot will keep track of this bug report. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
> For information about bisection process see: https://goo.gl/tpsmEJ#bisection
> syzbot can test patches for this bug, for details see:
> https://goo.gl/tpsmEJ#testing-patches
Similar to syzbot report 72461ac44b36c98f58e5, see my comments there.
--
paul moore
www.paul-moore.com
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: kernel panic: audit: backlog limit exceeded
2020-02-24 22:38 ` Paul Moore
@ 2020-02-24 22:43 ` Eric Paris
2020-02-24 22:46 ` Paul Moore
0 siblings, 1 reply; 2775+ messages in thread
From: Eric Paris @ 2020-02-24 22:43 UTC (permalink / raw)
To: Paul Moore, syzbot
Cc: a, b.a.t.m.a.n, dan.carpenter, davem, fzago, gregkh, john.hammond,
linux-audit, linux-kernel, mareklindner, netdev, sw,
syzkaller-bugs
https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the
reproducer listed) looks like it is literally fuzzing the AUDIT_SET.
Which seems like this is working as designed if it is setting the
failure mode to 2.
On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote:
> On Mon, Feb 24, 2020 at 3:18 AM syzbot
> <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote:
> > Hello,
> >
> > syzbot found the following crash on:
> >
> > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-
> > kdump-re..
> > git tree: net
> > console output:
> > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000
> > kernel config:
> > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16
> > dashboard link:
> > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316
> > compiler: gcc (GCC) 9.0.0 20181231 (experimental)
> > syz repro:
> > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000
> > C reproducer:
> > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000
> >
> > The bug was bisected to:
> >
> > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d
> > Author: Dan Carpenter <dan.carpenter@oracle.com>
> > Date: Fri Jul 28 14:42:27 2017 +0000
> >
> > staging: lustre: lustre: Off by two in lmv_fid2path()
> >
> > bisection log:
> > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000
> > final crash:
> > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000
> > console output:
> > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000
> >
> > IMPORTANT: if you fix the bug, please add the following tag to the
> > commit:
> > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com
> > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in
> > lmv_fid2path()")
> >
> > audit: audit_backlog=13 > audit_backlog_limit=7
> > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7
> > Kernel panic - not syncing: audit: backlog limit exceeded
> > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-
> > syzkaller #0
> > Hardware name: Google Google Compute Engine/Google Compute Engine,
> > BIOS Google 01/01/2011
> > Call Trace:
> > __dump_stack lib/dump_stack.c:77 [inline]
> > dump_stack+0x197/0x210 lib/dump_stack.c:118
> > panic+0x2e3/0x75c kernel/panic.c:221
> > audit_panic.cold+0x32/0x32 kernel/audit.c:307
> > audit_log_lost kernel/audit.c:377 [inline]
> > audit_log_lost+0x8b/0x180 kernel/audit.c:349
> > audit_log_start kernel/audit.c:1788 [inline]
> > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745
> > audit_log+0x95/0x120 kernel/audit.c:2345
> > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413
> > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084
> > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline]
> > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681
> > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
> > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115
> > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline]
> > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933
> > tcp_setsockopt net/ipv4/tcp.c:3165 [inline]
> > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159
> > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149
> > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130
> > __do_sys_setsockopt net/socket.c:2146 [inline]
> > __se_sys_setsockopt net/socket.c:2143 [inline]
> > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143
> > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
> > entry_SYSCALL_64_after_hwframe+0x49/0xbe
> > RIP: 0033:0x44720a
> > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0
> > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05
> > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00
> > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX:
> > 0000000000000036
> > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a
> > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
> > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000
> > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0
> > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0
> > Kernel Offset: disabled
> > Rebooting in 86400 seconds..
> >
> >
> > ---
> > This bug is generated by a bot. It may contain errors.
> > See https://goo.gl/tpsmEJ for more information about syzbot.
> > syzbot engineers can be reached at syzkaller@googlegroups.com.
> >
> > syzbot will keep track of this bug report. See:
> > https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
> > For information about bisection process see:
> > https://goo.gl/tpsmEJ#bisection
> > syzbot can test patches for this bug, for details see:
> > https://goo.gl/tpsmEJ#testing-patches
>
> Similar to syzbot report 72461ac44b36c98f58e5, see my comments there.
>
^ permalink raw reply [flat|nested] 2775+ messages in thread* Re: kernel panic: audit: backlog limit exceeded
2020-02-24 22:43 ` Eric Paris
@ 2020-02-24 22:46 ` Paul Moore
[not found] ` <CAHC9VhQnbdJprbdTa_XcgUJaiwhzbnGMWJqHczU54UMk0AFCtw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 2775+ messages in thread
From: Paul Moore @ 2020-02-24 22:46 UTC (permalink / raw)
To: Eric Paris
Cc: syzbot, a, b.a.t.m.a.n, dan.carpenter, davem, fzago, gregkh,
john.hammond, linux-audit, linux-kernel, mareklindner, netdev, sw,
syzkaller-bugs
On Mon, Feb 24, 2020 at 5:43 PM Eric Paris <eparis@redhat.com> wrote:
> https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000 (the
> reproducer listed) looks like it is literally fuzzing the AUDIT_SET.
> Which seems like this is working as designed if it is setting the
> failure mode to 2.
So it is, good catch :) I saw the panic and instinctively chalked
that up to a mistaken config, not expecting that it was what was being
tested.
> On Mon, 2020-02-24 at 17:38 -0500, Paul Moore wrote:
> > On Mon, Feb 24, 2020 at 3:18 AM syzbot
> > <syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com> wrote:
> > > Hello,
> > >
> > > syzbot found the following crash on:
> > >
> > > HEAD commit: 36a44bcd Merge branch 'bnxt_en-shutdown-and-kexec-
> > > kdump-re..
> > > git tree: net
> > > console output:
> > > https://syzkaller.appspot.com/x/log.txt?x=148bfdd9e00000
> > > kernel config:
> > > https://syzkaller.appspot.com/x/.config?x=768cc3d3e277cc16
> > > dashboard link:
> > > https://syzkaller.appspot.com/bug?extid=9a5e789e4725b9ef1316
> > > compiler: gcc (GCC) 9.0.0 20181231 (experimental)
> > > syz repro:
> > > https://syzkaller.appspot.com/x/repro.syz?x=151b1109e00000
> > > C reproducer:
> > > https://syzkaller.appspot.com/x/repro.c?x=128bfdd9e00000
> > >
> > > The bug was bisected to:
> > >
> > > commit 0c1b9970ddd4cc41002321c3877e7f91aacb896d
> > > Author: Dan Carpenter <dan.carpenter@oracle.com>
> > > Date: Fri Jul 28 14:42:27 2017 +0000
> > >
> > > staging: lustre: lustre: Off by two in lmv_fid2path()
> > >
> > > bisection log:
> > > https://syzkaller.appspot.com/x/bisect.txt?x=17e6c3e9e00000
> > > final crash:
> > > https://syzkaller.appspot.com/x/report.txt?x=1416c3e9e00000
> > > console output:
> > > https://syzkaller.appspot.com/x/log.txt?x=1016c3e9e00000
> > >
> > > IMPORTANT: if you fix the bug, please add the following tag to the
> > > commit:
> > > Reported-by: syzbot+9a5e789e4725b9ef1316@syzkaller.appspotmail.com
> > > Fixes: 0c1b9970ddd4 ("staging: lustre: lustre: Off by two in
> > > lmv_fid2path()")
> > >
> > > audit: audit_backlog=13 > audit_backlog_limit=7
> > > audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=7
> > > Kernel panic - not syncing: audit: backlog limit exceeded
> > > CPU: 1 PID: 9913 Comm: syz-executor024 Not tainted 5.6.0-rc1-
> > > syzkaller #0
> > > Hardware name: Google Google Compute Engine/Google Compute Engine,
> > > BIOS Google 01/01/2011
> > > Call Trace:
> > > __dump_stack lib/dump_stack.c:77 [inline]
> > > dump_stack+0x197/0x210 lib/dump_stack.c:118
> > > panic+0x2e3/0x75c kernel/panic.c:221
> > > audit_panic.cold+0x32/0x32 kernel/audit.c:307
> > > audit_log_lost kernel/audit.c:377 [inline]
> > > audit_log_lost+0x8b/0x180 kernel/audit.c:349
> > > audit_log_start kernel/audit.c:1788 [inline]
> > > audit_log_start+0x70e/0x7c0 kernel/audit.c:1745
> > > audit_log+0x95/0x120 kernel/audit.c:2345
> > > xt_replace_table+0x61d/0x830 net/netfilter/x_tables.c:1413
> > > __do_replace+0x1da/0x950 net/ipv6/netfilter/ip6_tables.c:1084
> > > do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline]
> > > do_ip6t_set_ctl+0x33a/0x4c8 net/ipv6/netfilter/ip6_tables.c:1681
> > > nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
> > > nf_setsockopt+0x77/0xd0 net/netfilter/nf_sockopt.c:115
> > > ipv6_setsockopt net/ipv6/ipv6_sockglue.c:949 [inline]
> > > ipv6_setsockopt+0x147/0x180 net/ipv6/ipv6_sockglue.c:933
> > > tcp_setsockopt net/ipv4/tcp.c:3165 [inline]
> > > tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3159
> > > sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149
> > > __sys_setsockopt+0x261/0x4c0 net/socket.c:2130
> > > __do_sys_setsockopt net/socket.c:2146 [inline]
> > > __se_sys_setsockopt net/socket.c:2143 [inline]
> > > __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143
> > > do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
> > > entry_SYSCALL_64_after_hwframe+0x49/0xbe
> > > RIP: 0033:0x44720a
> > > Code: 49 89 ca b8 37 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 1a e0
> > > fb ff c3 66 0f 1f 84 00 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05
> > > <48> 3d 01 f0 ff ff 0f 83 fa df fb ff c3 66 0f 1f 84 00 00 00 00 00
> > > RSP: 002b:00007ffd032dec78 EFLAGS: 00000286 ORIG_RAX:
> > > 0000000000000036
> > > RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 000000000044720a
> > > RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
> > > RBP: 00007ffd032deda0 R08: 00000000000003b8 R09: 0000000000004000
> > > R10: 00000000006d7b40 R11: 0000000000000286 R12: 00007ffd032deca0
> > > R13: 00000000006d9d60 R14: 0000000000000029 R15: 00000000006d7ba0
> > > Kernel Offset: disabled
> > > Rebooting in 86400 seconds..
> > >
> > >
> > > ---
> > > This bug is generated by a bot. It may contain errors.
> > > See https://goo.gl/tpsmEJ for more information about syzbot.
> > > syzbot engineers can be reached at syzkaller@googlegroups.com.
> > >
> > > syzbot will keep track of this bug report. See:
> > > https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
> > > For information about bisection process see:
> > > https://goo.gl/tpsmEJ#bisection
> > > syzbot can test patches for this bug, for details see:
> > > https://goo.gl/tpsmEJ#testing-patches
> >
> > Similar to syzbot report 72461ac44b36c98f58e5, see my comments there.
> >
>
--
paul moore
www.paul-moore.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-04 9:42 Julie Leach
0 siblings, 0 replies; 2775+ messages in thread
From: Julie Leach @ 2020-03-04 9:42 UTC (permalink / raw)
--
Hallo Liebes, ich habe eine Spende von 3,000,000.00 Euro, die ich Ihnen
als Wohltätigkeitsorganisation zur Verfügung gestellt habe, um den
weniger Privilegierten und Waisen in Ihrer Gemeinde zu helfen. Bitte
antworten Sie über: julieleeach@gmail.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-04 23:30 Maria Alessandra Filippi
0 siblings, 0 replies; 2775+ messages in thread
From: Maria Alessandra Filippi @ 2020-03-04 23:30 UTC (permalink / raw)
Hallo,
Ich bin Frau Maria Elisabeth Schaeffler, eine deutsche Wirtschaftsmagnatin, Investorin und Philanthropin. Ich bin der Vorsitzende von Wipro Limited. Ich habe 25 Prozent meines persönlichen Vermögens für wohltätige Zwecke ausgegeben. Und ich habe auch versprochen, den Rest von 25% in diesem Jahr 2020 an Einzelpersonen zu verschenken. Ich habe beschlossen, 1.000.000,00 Euro an Sie zu spenden. Wenn Sie an meiner Spende interessiert sind, kontaktieren Sie mich für weitere Informationen.
Sie können auch mehr über mich über den Link unten lesen
https://en.wikipedia.org/wiki/Maria-Elisabeth_Schaeffler
Herzlicher Gruss
Geschäftsführer Wipro Limited
Maria-Elisabeth_Schaeffler
E-Mail: mrsmariaelisabethschaeffler11@gmail.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 0:26 Maria Alessandra Filippi
0 siblings, 0 replies; 2775+ messages in thread
From: Maria Alessandra Filippi @ 2020-03-05 0:26 UTC (permalink / raw)
Hallo,
Ich bin Frau Maria Elisabeth Schaeffler, eine deutsche Wirtschaftsmagnatin, Investorin und Philanthropin. Ich bin der Vorsitzende von Wipro Limited. Ich habe 25 Prozent meines persönlichen Vermögens für wohltätige Zwecke ausgegeben. Und ich habe auch versprochen, den Rest von 25% in diesem Jahr 2020 an Einzelpersonen zu verschenken. Ich habe beschlossen, 1.000.000,00 Euro an Sie zu spenden. Wenn Sie an meiner Spende interessiert sind, kontaktieren Sie mich für weitere Informationen.
Sie können auch mehr über mich über den Link unten lesen
https://en.wikipedia.org/wiki/Maria-Elisabeth_Schaeffler
Herzlicher Gruss
Geschäftsführer Wipro Limited
Maria-Elisabeth_Schaeffler
E-Mail: mrsmariaelisabethschaeffler11@gmail.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 2:33 Maria Alessandra Filippi
0 siblings, 0 replies; 2775+ messages in thread
From: Maria Alessandra Filippi @ 2020-03-05 2:33 UTC (permalink / raw)
Hallo,
Ich bin Frau Maria Elisabeth Schaeffler, eine deutsche Wirtschaftsmagnatin, Investorin und Philanthropin. Ich bin der Vorsitzende von Wipro Limited. Ich habe 25 Prozent meines persönlichen Vermögens für wohltätige Zwecke ausgegeben. Und ich habe auch versprochen, den Rest von 25% in diesem Jahr 2020 an Einzelpersonen zu verschenken. Ich habe beschlossen, 1.000.000,00 Euro an Sie zu spenden. Wenn Sie an meiner Spende interessiert sind, kontaktieren Sie mich für weitere Informationen.
Sie können auch mehr über mich über den Link unten lesen
https://en.wikipedia.org/wiki/Maria-Elisabeth_Schaeffler
Herzlicher Gruss
Geschäftsführer Wipro Limited
Maria-Elisabeth_Schaeffler
E-Mail: mrsmariaelisabethschaeffler11@gmail.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 10:46 Juanito S. Galang
0 siblings, 0 replies; 2775+ messages in thread
From: Juanito S. Galang @ 2020-03-05 10:46 UTC (permalink / raw)
Herzlichen Glückwunsch Lieber Begünstigter,Sie erhalten diese E-Mail von der Robert Bailey Foundation. Ich bin ein pensionierter Regierungsangestellter aus Harlem und ein Gewinner des Powerball Lottery Jackpot im Wert von 343,8 Millionen US-Dollar. Ich bin der größte Jackpot-Gewinner in der Geschichte der New Yorker Lotterie im US-Bundesstaat Amerika. Ich habe diese Lotterie am 27. Oktober 2018 gewonnen und möchte Sie darüber informieren, dass Google in Zusammenarbeit mit Microsoft Ihre "E-Mail-Adresse" auf meine Bitte, einen Spendenbetrag von 3.000.000,00 Millionen Euro zu erhalten, übermittelt hat. Ich spende diese 3 Millionen Euro an Sie, um den Wohltätigkeitsheimen und armen Menschen in Ihrer Gemeinde zu helfen, damit wir die Welt für alle verbessern können.Weitere Informationen finden Sie auf der folgenden Website, damit Sie nicht skeptisch sind
Diese Spende von 3 Mio. EUR.https://nypost.com/2018/11/14/meet-the-winner-of-the-biggest-lottery-jackpot-in-new-york-history/Sie können auch mein YouTube für mehr Bestätigung aufpassen:
https://www.youtube.com/watch?v=H5vT18Ysavc
Bitte beachten Sie, dass alle Antworten an (robertdonation7@gmail.com ) gesendet werden, damit wir das können
Fahren Sie fort, um das gespendete Geld an Sie zu überweisen.E-Mail: robertdonation7@gmail.comFreundliche Grüße,
Robert Bailey
* * * * * * * * * * * * * * * *
Powerball Jackpot Gewinner
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 10:46 Juanito S. Galang
0 siblings, 0 replies; 2775+ messages in thread
From: Juanito S. Galang @ 2020-03-05 10:46 UTC (permalink / raw)
Herzlichen Glückwunsch Lieber Begünstigter,Sie erhalten diese E-Mail von der Robert Bailey Foundation. Ich bin ein pensionierter Regierungsangestellter aus Harlem und ein Gewinner des Powerball Lottery Jackpot im Wert von 343,8 Millionen US-Dollar. Ich bin der größte Jackpot-Gewinner in der Geschichte der New Yorker Lotterie im US-Bundesstaat Amerika. Ich habe diese Lotterie am 27. Oktober 2018 gewonnen und möchte Sie darüber informieren, dass Google in Zusammenarbeit mit Microsoft Ihre "E-Mail-Adresse" auf meine Bitte, einen Spendenbetrag von 3.000.000,00 Millionen Euro zu erhalten, übermittelt hat. Ich spende diese 3 Millionen Euro an Sie, um den Wohltätigkeitsheimen und armen Menschen in Ihrer Gemeinde zu helfen, damit wir die Welt für alle verbessern können.Weitere Informationen finden Sie auf der folgenden Website, damit Sie nicht skeptisch sind
Diese Spende von 3 Mio. EUR.https://nypost.com/2018/11/14/meet-the-winner-of-the-biggest-lottery-jackpot-in-new-york-history/Sie können auch mein YouTube für mehr Bestätigung aufpassen:
https://www.youtube.com/watch?v=H5vT18Ysavc
Bitte beachten Sie, dass alle Antworten an (robertdonation7@gmail.com ) gesendet werden, damit wir das können
Fahren Sie fort, um das gespendete Geld an Sie zu überweisen.E-Mail: robertdonation7@gmail.comFreundliche Grüße,
Robert Bailey
* * * * * * * * * * * * * * * *
Powerball Jackpot Gewinner
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 10:46 Juanito S. Galang
0 siblings, 0 replies; 2775+ messages in thread
From: Juanito S. Galang @ 2020-03-05 10:46 UTC (permalink / raw)
Herzlichen Glückwunsch Lieber Begünstigter,Sie erhalten diese E-Mail von der Robert Bailey Foundation. Ich bin ein pensionierter Regierungsangestellter aus Harlem und ein Gewinner des Powerball Lottery Jackpot im Wert von 343,8 Millionen US-Dollar. Ich bin der größte Jackpot-Gewinner in der Geschichte der New Yorker Lotterie im US-Bundesstaat Amerika. Ich habe diese Lotterie am 27. Oktober 2018 gewonnen und möchte Sie darüber informieren, dass Google in Zusammenarbeit mit Microsoft Ihre "E-Mail-Adresse" auf meine Bitte, einen Spendenbetrag von 3.000.000,00 Millionen Euro zu erhalten, übermittelt hat. Ich spende diese 3 Millionen Euro an Sie, um den Wohltätigkeitsheimen und armen Menschen in Ihrer Gemeinde zu helfen, damit wir die Welt für alle verbessern können.Weitere Informationen finden Sie auf der folgenden Website, damit Sie nicht skeptisch sind
Diese Spende von 3 Mio. EUR.https://nypost.com/2018/11/14/meet-the-winner-of-the-biggest-lottery-jackpot-in-new-york-history/Sie können auch mein YouTube für mehr Bestätigung aufpassen:
https://www.youtube.com/watch?v=H5vT18Ysavc
Bitte beachten Sie, dass alle Antworten an (robertdonation7@gmail.com ) gesendet werden, damit wir das können
Fahren Sie fort, um das gespendete Geld an Sie zu überweisen.E-Mail: robertdonation7@gmail.comFreundliche Grüße,
Robert Bailey
* * * * * * * * * * * * * * * *
Powerball Jackpot Gewinner
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 10:46 Juanito S. Galang
0 siblings, 0 replies; 2775+ messages in thread
From: Juanito S. Galang @ 2020-03-05 10:46 UTC (permalink / raw)
Herzlichen Glückwunsch Lieber Begünstigter,Sie erhalten diese E-Mail von der Robert Bailey Foundation. Ich bin ein pensionierter Regierungsangestellter aus Harlem und ein Gewinner des Powerball Lottery Jackpot im Wert von 343,8 Millionen US-Dollar. Ich bin der größte Jackpot-Gewinner in der Geschichte der New Yorker Lotterie im US-Bundesstaat Amerika. Ich habe diese Lotterie am 27. Oktober 2018 gewonnen und möchte Sie darüber informieren, dass Google in Zusammenarbeit mit Microsoft Ihre "E-Mail-Adresse" auf meine Bitte, einen Spendenbetrag von 3.000.000,00 Millionen Euro zu erhalten, übermittelt hat. Ich spende diese 3 Millionen Euro an Sie, um den Wohltätigkeitsheimen und armen Menschen in Ihrer Gemeinde zu helfen, damit wir die Welt für alle verbessern können.Weitere Informationen finden Sie auf der folgenden Website, damit Sie nicht skeptisch sind
Diese Spende von 3 Mio. EUR.https://nypost.com/2018/11/14/meet-the-winner-of-the-biggest-lottery-jackpot-in-new-york-history/Sie können auch mein YouTube für mehr Bestätigung aufpassen:
https://www.youtube.com/watch?v=H5vT18Ysavc
Bitte beachten Sie, dass alle Antworten an (robertdonation7-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org ) gesendet werden, damit wir das können
Fahren Sie fort, um das gespendete Geld an Sie zu überweisen.E-Mail: robertdonation7-Re5JQEeQqe/BREloi785ARduMeKFjlen@public.gmane.org Grüße,
Robert Bailey
* * * * * * * * * * * * * * * *
Powerball Jackpot Gewinner
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 10:46 Juanito S. Galang
0 siblings, 0 replies; 2775+ messages in thread
From: Juanito S. Galang @ 2020-03-05 10:46 UTC (permalink / raw)
Herzlichen Glückwunsch Lieber Begünstigter,Sie erhalten diese E-Mail von der Robert Bailey Foundation. Ich bin ein pensionierter Regierungsangestellter aus Harlem und ein Gewinner des Powerball Lottery Jackpot im Wert von 343,8 Millionen US-Dollar. Ich bin der größte Jackpot-Gewinner in der Geschichte der New Yorker Lotterie im US-Bundesstaat Amerika. Ich habe diese Lotterie am 27. Oktober 2018 gewonnen und möchte Sie darüber informieren, dass Google in Zusammenarbeit mit Microsoft Ihre "E-Mail-Adresse" auf meine Bitte, einen Spendenbetrag von 3.000.000,00 Millionen Euro zu erhalten, übermittelt hat. Ich spende diese 3 Millionen Euro an Sie, um den Wohltätigkeitsheimen und armen Menschen in Ihrer Gemeinde zu helfen, damit wir die Welt für alle verbessern können.Weitere Informationen finden Sie auf der folgenden Website, damit Sie nicht skeptisch sind
Diese Spende von 3 Mio. EUR.https://nypost.com/2018/11/14/meet-the-winner-of-the-biggest-lottery-jackpot-in-new-york-history/Sie können auch mein YouTube für mehr Bestätigung aufpassen:
https://www.youtube.com/watch?v=H5vT18Ysavc
Bitte beachten Sie, dass alle Antworten an (robertdonation7@gmail.com ) gesendet werden, damit wir das können
Fahren Sie fort, um das gespendete Geld an Sie zu überweisen.E-Mail: robertdonation7@gmail.comFreundliche Grüße,
Robert Bailey
* * * * * * * * * * * * * * * *
Powerball Jackpot Gewinner
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 10:46 Juanito S. Galang
0 siblings, 0 replies; 2775+ messages in thread
From: Juanito S. Galang @ 2020-03-05 10:46 UTC (permalink / raw)
Herzlichen Glückwunsch Lieber Begünstigter,Sie erhalten diese E-Mail von der Robert Bailey Foundation. Ich bin ein pensionierter Regierungsangestellter aus Harlem und ein Gewinner des Powerball Lottery Jackpot im Wert von 343,8 Millionen US-Dollar. Ich bin der größte Jackpot-Gewinner in der Geschichte der New Yorker Lotterie im US-Bundesstaat Amerika. Ich habe diese Lotterie am 27. Oktober 2018 gewonnen und möchte Sie darüber informieren, dass Google in Zusammenarbeit mit Microsoft Ihre "E-Mail-Adresse" auf meine Bitte, einen Spendenbetrag von 3.000.000,00 Millionen Euro zu erhalten, übermittelt hat. Ich spende diese 3 Millionen Euro an Sie, um den Wohltätigkeitsheimen und armen Menschen in Ihrer Gemeinde zu helfen, damit wir die Welt für alle verbessern können.Weitere Informationen finden Sie auf der folgenden Website, damit Sie nicht skeptisch sind
Diese Spende von 3 Mio. EUR.https://nypost.com/2018/11/14/meet-the-winner-of-the-biggest-lottery-jackpot-in-new-york-history/Sie können auch mein YouTube für mehr Bestätigung aufpassen:
https://www.youtube.com/watch?v=H5vT18Ysavc
Bitte beachten Sie, dass alle Antworten an (robertdonation7@gmail.com ) gesendet werden, damit wir das können
Fahren Sie fort, um das gespendete Geld an Sie zu überweisen.E-Mail: robertdonation7@gmail.comFreundliche Grüße,
Robert Bailey
* * * * * * * * * * * * * * * *
Powerball Jackpot Gewinner
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-05 10:47 Juanito S. Galang
0 siblings, 0 replies; 2775+ messages in thread
From: Juanito S. Galang @ 2020-03-05 10:47 UTC (permalink / raw)
Herzlichen Glückwunsch Lieber Begünstigter,Sie erhalten diese E-Mail von der Robert Bailey Foundation. Ich bin ein pensionierter Regierungsangestellter aus Harlem und ein Gewinner des Powerball Lottery Jackpot im Wert von 343,8 Millionen US-Dollar. Ich bin der größte Jackpot-Gewinner in der Geschichte der New Yorker Lotterie im US-Bundesstaat Amerika. Ich habe diese Lotterie am 27. Oktober 2018 gewonnen und möchte Sie darüber informieren, dass Google in Zusammenarbeit mit Microsoft Ihre "E-Mail-Adresse" auf meine Bitte, einen Spendenbetrag von 3.000.000,00 Millionen Euro zu erhalten, übermittelt hat. Ich spende diese 3 Millionen Euro an Sie, um den Wohltätigkeitsheimen und armen Menschen in Ihrer Gemeinde zu helfen, damit wir die Welt für alle verbessern können.Weitere Informationen finden Sie auf der folgenden Website, damit Sie nicht skeptisch sind
Diese Spende von 3 Mio. EUR.https://nypost.com/2018/11/14/meet-the-winner-of-the-biggest-lottery-jackpot-in-new-york-history/Sie können auch mein YouTube für mehr Bestätigung aufpassen:
https://www.youtube.com/watch?v=H5vT18Ysavc
Bitte beachten Sie, dass alle Antworten an (robertdonation7@gmail.com ) gesendet werden, damit wir das können
Fahren Sie fort, um das gespendete Geld an Sie zu überweisen.E-Mail: robertdonation7@gmail.comFreundliche Grüße,
Robert Bailey
* * * * * * * * * * * * * * * *
Powerball Jackpot Gewinner
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-09 7:34 Michael J. Weirsky
0 siblings, 0 replies; 2775+ messages in thread
From: Michael J. Weirsky @ 2020-03-09 7:34 UTC (permalink / raw)
--
My name is Michael J. Weirsky, I'm an unemployed Handy man , winner of
$273million Jackpot in March 8, 2019. I donate $1.000.000,00 to you.
Contact me via email: micjsky@aol.com for info / claim.
Continue reading:
https://abcnews.go.com/WNT/video/jersey-handyman-forward-273m-lottery-winner-61544244
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-09 7:34 Michael J. Weirsky
0 siblings, 0 replies; 2775+ messages in thread
From: Michael J. Weirsky @ 2020-03-09 7:34 UTC (permalink / raw)
--
My name is Michael J. Weirsky, I'm an unemployed Handy man , winner of
$273million Jackpot in March 8, 2019. I donate $1.000.000,00 to you.
Contact me via email: micjsky-YDxpq3io04c@public.gmane.org for info / claim.
Continue reading:
https://abcnews.go.com/WNT/video/jersey-handyman-forward-273m-lottery-winner-61544244
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-09 7:34 Michael J. Weirsky
0 siblings, 0 replies; 2775+ messages in thread
From: Michael J. Weirsky @ 2020-03-09 7:34 UTC (permalink / raw)
--
My name is Michael J. Weirsky, I'm an unemployed Handy man , winner of
$273million Jackpot in March 8, 2019. I donate $1.000.000,00 to you.
Contact me via email: micjsky@aol.com for info / claim.
Continue reading:
https://abcnews.go.com/WNT/video/jersey-handyman-forward-273m-lottery-winner-61544244
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-09 7:34 Michael J. Weirsky
0 siblings, 0 replies; 2775+ messages in thread
From: Michael J. Weirsky @ 2020-03-09 7:34 UTC (permalink / raw)
--
My name is Michael J. Weirsky, I'm an unemployed Handy man , winner of
$273million Jackpot in March 8, 2019. I donate $1.000.000,00 to you.
Contact me via email: micjsky-YDxpq3io04c@public.gmane.org for info / claim.
Continue reading:
https://abcnews.go.com/WNT/video/jersey-handyman-forward-273m-lottery-winner-61544244
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-09 7:37 Michael J. Weirsky
0 siblings, 0 replies; 2775+ messages in thread
From: Michael J. Weirsky @ 2020-03-09 7:37 UTC (permalink / raw)
--
My name is Michael J. Weirsky, I'm an unemployed Handy man , winner of
$273million Jackpot in March 8, 2019. I donate $1.000.000,00 to you.
Contact me via email: micjsky@aol.com for info / claim.
Continue reading:
https://abcnews.go.com/WNT/video/jersey-handyman-forward-273m-lottery-winner-61544244
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-09 8:43 Michael J. Weirsky
0 siblings, 0 replies; 2775+ messages in thread
From: Michael J. Weirsky @ 2020-03-09 8:43 UTC (permalink / raw)
--
My name is Michael J. Weirsky, I'm an unemployed Handy man , winner of
$273million Jackpot in March 8, 2019. I donate $1.000.000,00 to you.
Contact me via email: micjsky@aol.com for info / claim.
Continue reading:
https://abcnews.go.com/WNT/video/jersey-handyman-forward-273m-lottery-winner-61544244
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-17 0:11 David Ibe
0 siblings, 0 replies; 2775+ messages in thread
From: David Ibe @ 2020-03-17 0:11 UTC (permalink / raw)
Good Day,
I am Mr. David Ibe, I work with the International Standards on Auditing, I have seen on records, that several times people has divert your funds into their own personal accounts.
Now I am writing to you in respect of the amount which I have been able to send to you through our International United Nations accredited and approved Diplomat, who has arrived Africa, I want you to know that the diplomat would deliver the funds which I have packaged as a diplomatic compensation to you and the amount in the consignment is $10,000,000.00 United State Dollars.
I did not disclose the contents to the diplomat, but I told him that it is your compensation from the Auditing Corporate Governance and Stewardship, Auditing and Assurance Standards Board. I want you to know that these funds would help with your financial status as I have seen in records that you have spent a lot trying to receive these funds and I am not demanding so much from you but only 30% for my stress and logistics.
I would like you to get back to me with your personal contact details, so that I can give you the contact information's of the diplomat who has arrived Africa and has been waiting to get your details so that he can proceed with the delivery to you.
Yours Sincerely,
Kindly forward your details to: mrdavidibe966@gmail.com
Mr. David Ibe
International Auditor,
Corporate Governance and Stewardship
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-17 0:11 David Ibe
0 siblings, 0 replies; 2775+ messages in thread
From: David Ibe @ 2020-03-17 0:11 UTC (permalink / raw)
Good Day,
I am Mr. David Ibe, I work with the International Standards on Auditing, I have seen on records, that several times people has divert your funds into their own personal accounts.
Now I am writing to you in respect of the amount which I have been able to send to you through our International United Nations accredited and approved Diplomat, who has arrived Africa, I want you to know that the diplomat would deliver the funds which I have packaged as a diplomatic compensation to you and the amount in the consignment is $10,000,000.00 United State Dollars.
I did not disclose the contents to the diplomat, but I told him that it is your compensation from the Auditing Corporate Governance and Stewardship, Auditing and Assurance Standards Board. I want you to know that these funds would help with your financial status as I have seen in records that you have spent a lot trying to receive these funds and I am not demanding so much from you but only 30% for my stress and logistics.
I would like you to get back to me with your personal contact details, so that I can give you the contact information's of the diplomat who has arrived Africa and has been waiting to get your details so that he can proceed with the delivery to you.
Yours Sincerely,
Kindly forward your details to: mrdavidibe966@gmail.com
Mr. David Ibe
International Auditor,
Corporate Governance and Stewardship
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-03-27 8:36 chenanqing
0 siblings, 0 replies; 2775+ messages in thread
From: chenanqing @ 2020-03-27 8:36 UTC (permalink / raw)
To: chenanqing, linux-kernel, netdev, ceph-devel, kuba, sage, jlayton,
idryomov
From: Chen Anqing <chenanqing@oppo.com>
To: Ilya Dryomov <idryomov@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>,
Sage Weil <sage@redhat.com>,
Jakub Kicinski <kuba@kernel.org>,
ceph-devel@vger.kernel.org,
netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
chenanqing@oppo.com
Subject: [PATCH] libceph: we should take compound page into account also
Date: Fri, 27 Mar 2020 04:36:30 -0400
Message-Id: <20200327083630.36296-1-chenanqing@oppo.com>
X-Mailer: git-send-email 2.18.2
the patch is occur at a real crash,which slab is
come from a compound page,so we need take the compound page
into account also.
fixed commit 7e241f647dc7 ("libceph: fall back to sendmsg for slab pages")'
Signed-off-by: Chen Anqing <chenanqing@oppo.com>
---
net/ceph/messenger.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index f8ca5edc5f2c..e08c1c334cd9 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -582,7 +582,7 @@ static int ceph_tcp_sendpage(struct socket *sock, struct page *page,
* coalescing neighboring slab objects into a single frag which
* triggers one of hardened usercopy checks.
*/
- if (page_count(page) >= 1 && !PageSlab(page))
+ if (page_count(page) >= 1 && !PageSlab(compound_head(page)))
sendpage = sock->ops->sendpage;
else
sendpage = sock_no_sendpage;
--
2.18.2
________________________________
OPPO
本电子邮件及其附件含有OPPO公司的保密信息,仅限于邮件指明的收件人使用(包含个人及群组)。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件,请立即以电子邮件通知发件人并删除本邮件及其附件。
This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown)
@ 2020-03-27 9:20 chenanqing
0 siblings, 0 replies; 2775+ messages in thread
From: chenanqing @ 2020-03-27 9:20 UTC (permalink / raw)
To: chenanqing, linux-kernel, linux-scsi, open-iscsi, ceph-devel,
martin.petersen, jejb, cleech, lduncan
From: Chen Anqing <chenanqing@oppo.com>
To: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>,
"James E . J . Bottomley" <jejb@linux.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
ceph-devel@vger.kernel.org,
open-iscsi@googlegroups.com,
linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
chenanqing@oppo.com
Subject: [PATCH] scsi: libiscsi: we should take compound page into account also
Date: Fri, 27 Mar 2020 05:20:01 -0400
Message-Id: <20200327092001.56879-1-chenanqing@oppo.com>
X-Mailer: git-send-email 2.18.2
the patch is occur at a real crash,which slab is
come from a compound page,so we need take the compound page
into account also.
fixed commit 08b11eaccfcf ("scsi: libiscsi: fall back to
sendmsg for slab pages").
Signed-off-by: Chen Anqing <chenanqing@oppo.com>
---
drivers/scsi/libiscsi_tcp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 6ef93c7af954..98304e5e1f6f 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -128,7 +128,8 @@ static void iscsi_tcp_segment_map(struct iscsi_segment *segment, int recv)
* coalescing neighboring slab objects into a single frag which
* triggers one of hardened usercopy checks.
*/
- if (!recv && page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)))
+ if (!recv && page_count(sg_page(sg)) >= 1 &&
+ !PageSlab(compound_head(sg_page(sg))))
return;
if (recv) {
--
2.18.2
________________________________
OPPO
本电子邮件及其附件含有OPPO公司的保密信息,仅限于邮件指明的收件人使用(包含个人及群组)。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件,请立即以电子邮件通知发件人并删除本邮件及其附件。
This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!
^ permalink raw reply related [flat|nested] 2775+ messages in thread* (unknown)
@ 2020-04-23 23:06 Azim Hashim Premji
0 siblings, 0 replies; 2775+ messages in thread
From: Azim Hashim Premji @ 2020-04-23 23:06 UTC (permalink / raw)
--
Hallo,
Ich bin Azim Hashim Premji, ein indischer Wirtschaftsmagnat, Investor
und Philanthrop. Ich bin der Vorsitzende von Wipro Limited. Ich habe
25 Prozent meines persönlichen Vermögens für wohltätige Zwecke
verschenkt. Und ich habe auch zugesagt, den Rest von 25% in diesem
Jahr 2020 an Einzelpersonen COVID-19 Financial zu verschenken. Ich
habe beschlossen, 2.000.000 Euro an Sie zu spenden. Wenn Sie an meiner
Spende interessiert sind, kontaktieren Sie mich für weitere
Informationen.
Sie können auch mehr über mich über den unten stehenden Link lesen
http://en.wikipedia.org/wiki/Azim_Premji
Herzlicher Gruss
CEO Wipro Limited
Azim Hashim Premji
E-Mail: azimhashim011@gmail.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-04-23 23:06 Azim Hashim Premji
0 siblings, 0 replies; 2775+ messages in thread
From: Azim Hashim Premji @ 2020-04-23 23:06 UTC (permalink / raw)
--
Hallo,
Ich bin Azim Hashim Premji, ein indischer Wirtschaftsmagnat, Investor
und Philanthrop. Ich bin der Vorsitzende von Wipro Limited. Ich habe
25 Prozent meines persönlichen Vermögens für wohltätige Zwecke
verschenkt. Und ich habe auch zugesagt, den Rest von 25% in diesem
Jahr 2020 an Einzelpersonen COVID-19 Financial zu verschenken. Ich
habe beschlossen, 2.000.000 Euro an Sie zu spenden. Wenn Sie an meiner
Spende interessiert sind, kontaktieren Sie mich für weitere
Informationen.
Sie können auch mehr über mich über den unten stehenden Link lesen
http://en.wikipedia.org/wiki/Azim_Premji
Herzlicher Gruss
CEO Wipro Limited
Azim Hashim Premji
E-Mail: azimhashim011@gmail.com
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-05-08 22:58 Barbara D Wilkins
0 siblings, 0 replies; 2775+ messages in thread
From: Barbara D Wilkins @ 2020-05-08 22:58 UTC (permalink / raw)
Hallo, Wir sind eine christliche Organisation, die gegründet wurde, um Menschen zu helfen, die Hilfe benötigen, beispielsweise finanzielle Hilfe. Wenn Sie also finanzielle Schwierigkeiten haben oder sich in einem finanziellen Chaos befinden und Geld benötigen, um Ihr eigenes Unternehmen zu gründen, oder wenn Sie einen Kredit benötigen Begleichen Sie Ihre Schulden oder zahlen Sie Ihre Rechnungen ab, gründen Sie ein gutes Geschäft oder es fällt Ihnen schwer, einen Kapitalkredit von lokalen Banken zu erhalten. Kontaktieren Sie uns noch heute per E-Mail: Lassen Sie sich diese Gelegenheit also nicht entgehen weil Jesus gestern, heute und für immer derselbe ist. Bitte, diese sind für ernsthafte und gottesfürchtige Menschen.Dein Name:Darlehensbetrag:Leihdauer:Gülti
ge Handynummer:Vielen Dank für Ihr Verständnis für Ihren Kontakt, während wir warten: mrsbarbarawilkinsfunds.usagmail.comGrüßeVerwaltung
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-05-08 23:41 Barbara D Wilkins
0 siblings, 0 replies; 2775+ messages in thread
From: Barbara D Wilkins @ 2020-05-08 23:41 UTC (permalink / raw)
Hallo, Wir sind eine christliche Organisation, die gegründet wurde, um Menschen zu helfen, die Hilfe benötigen, beispielsweise finanzielle Hilfe. Wenn Sie also finanzielle Schwierigkeiten haben oder sich in einem finanziellen Chaos befinden und Geld benötigen, um Ihr eigenes Unternehmen zu gründen, oder wenn Sie einen Kredit benötigen Begleichen Sie Ihre Schulden oder zahlen Sie Ihre Rechnungen ab, gründen Sie ein gutes Geschäft oder es fällt Ihnen schwer, einen Kapitalkredit von lokalen Banken zu erhalten. Kontaktieren Sie uns noch heute per E-Mail: Lassen Sie sich diese Gelegenheit also nicht entgehen weil Jesus gestern, heute und für immer derselbe ist. Bitte, diese sind für ernsthafte und gottesfürchtige Menschen.Dein Name:Darlehensbetrag:Leihdauer:Gülti
ge Handynummer:Vielen Dank für Ihr Verständnis für Ihren Kontakt, während wir warten: mrsbarbarawilkinsfunds.usagmail.comGrüßeVerwaltung
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-05-08 23:51 Barbara D Wilkins
0 siblings, 0 replies; 2775+ messages in thread
From: Barbara D Wilkins @ 2020-05-08 23:51 UTC (permalink / raw)
Hallo, Wir sind eine christliche Organisation, die gegründet wurde, um Menschen zu helfen, die Hilfe benötigen, beispielsweise finanzielle Hilfe. Wenn Sie also finanzielle Schwierigkeiten haben oder sich in einem finanziellen Chaos befinden und Geld benötigen, um Ihr eigenes Unternehmen zu gründen, oder wenn Sie einen Kredit benötigen Begleichen Sie Ihre Schulden oder zahlen Sie Ihre Rechnungen ab, gründen Sie ein gutes Geschäft oder es fällt Ihnen schwer, einen Kapitalkredit von lokalen Banken zu erhalten. Kontaktieren Sie uns noch heute per E-Mail: Lassen Sie sich diese Gelegenheit also nicht entgehen weil Jesus gestern, heute und für immer derselbe ist. Bitte, diese sind für ernsthafte und gottesfürchtige Menschen.Dein Name:Darlehensbetrag:Leihdauer:Gülti
ge Handynummer:Vielen Dank für Ihr Verständnis für Ihren Kontakt, während wir warten: mrsbarbarawilkinsfunds.usagmail.comGrüßeVerwaltung
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-06-04 19:57 David Shine
0 siblings, 0 replies; 2775+ messages in thread
From: David Shine @ 2020-06-04 19:57 UTC (permalink / raw)
To: linux
Linux
https://clck.ru/NnuZT
David Shine
^ permalink raw reply [flat|nested] 2775+ messages in thread
[parent not found: <1327230475.528260.1591750200327.ref@mail.yahoo.com>]
* (unknown)
[not found] <1327230475.528260.1591750200327.ref@mail.yahoo.com>
@ 2020-06-10 0:50 ` Celine Marchand
0 siblings, 0 replies; 2775+ messages in thread
From: Celine Marchand @ 2020-06-10 0:50 UTC (permalink / raw)
Urgent attention please
Dearest, how are you? I am sorry for intruding your mailbox, but I need to talk to you. I got your email address in my dream and i wonder if it is correct because i emailed you earlier without any response. You should know that my contact to you is by the special grace of God. I am in urgent need of a reliable and reputable person and i believe you are a person of fine repute, hence the revelation of your email to me in the dream.
I am Mrs. Celine Marchand a citizen of France (French). But reside in Burkina Faso for business purposes. I need your collaboration to execute some projects worth € 2.800.000 Euro and it is very urgent as am presently in very critical condition.
Please reply through this email address ( celine88492-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org ) with your full contact information for more private and confidential communication.
Thank you as i wait for your reply.
Mrs. Celine Marchand
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-06-27 21:52 helen
0 siblings, 0 replies; 2775+ messages in thread
From: helen @ 2020-06-27 21:52 UTC (permalink / raw)
To: ebkrumme
MONEY-GRAM TRANSFERRED PAYMENT INFO:
Below is the sender’s information
1. MG. REFERENCE NO#: 36360857
2. SENDER'S NAME: Johnson Williams
3. AMOUNT TO PICKUP: US$10,000
Go to any Money Gram office near you and pick up the payment Track the
Reference Number by visiting and click the link below
(https://secure.moneygram.com/embed/track) and enter the Reference
Number: 36360857 and the Last Name: Williams, you will find the payment
available for pickup instantly.
Yours Sincerely,
Mrs. Helen Marvis
United Nations Liaison Office
Directorate for International Payments
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-06-27 21:54 helen
0 siblings, 0 replies; 2775+ messages in thread
From: helen @ 2020-06-27 21:54 UTC (permalink / raw)
To: zhang
MONEY-GRAM TRANSFERRED PAYMENT INFO:
Below is the sender’s information
1. MG. REFERENCE NO#: 36360857
2. SENDER'S NAME: Johnson Williams
3. AMOUNT TO PICKUP: US$10,000
Go to any Money Gram office near you and pick up the payment Track the
Reference Number by visiting and click the link below
(https://secure.moneygram.com/embed/track) and enter the Reference
Number: 36360857 and the Last Name: Williams, you will find the payment
available for pickup instantly.
Yours Sincerely,
Mrs. Helen Marvis
United Nations Liaison Office
Directorate for International Payments
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-06-27 21:58 lookman joe
0 siblings, 0 replies; 2775+ messages in thread
From: lookman joe @ 2020-06-27 21:58 UTC (permalink / raw)
MONEY-GRAM TRANSFERRED PAYMENT INFO:
Below is the sender’s information
1. MG. REFERENCE NO#: 36360857
2. SENDER'S NAME: Johnson Williams
3. AMOUNT TO PICKUP: US$10,000
Go to any Money Gram office near you and pick up the payment Track the
Reference Number by visiting and click the link below
(https://secure.moneygram.com/embed/track) and enter the Reference
Number: 36360857 and the Last Name: Williams, you will find the payment
available for pickup instantly.
Yours Sincerely,
Mrs. Helen Marvis
United Nations Liaison Office
Directorate for International Payments
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-06-27 21:58 lookman joe
0 siblings, 0 replies; 2775+ messages in thread
From: lookman joe @ 2020-06-27 21:58 UTC (permalink / raw)
MONEY-GRAM TRANSFERRED PAYMENT INFO:
Below is the sender’s information
1. MG. REFERENCE NO#: 36360857
2. SENDER'S NAME: Johnson Williams
3. AMOUNT TO PICKUP: US$10,000
Go to any Money Gram office near you and pick up the payment Track the
Reference Number by visiting and click the link below
(https://secure.moneygram.com/embed/track) and enter the Reference
Number: 36360857 and the Last Name: Williams, you will find the payment
available for pickup instantly.
Yours Sincerely,
Mrs. Helen Marvis
United Nations Liaison Office
Directorate for International Payments
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-06-27 21:58 lookman joe
0 siblings, 0 replies; 2775+ messages in thread
From: lookman joe @ 2020-06-27 21:58 UTC (permalink / raw)
MONEY-GRAM TRANSFERRED PAYMENT INFO:
Below is the sender’s information
1. MG. REFERENCE NO#: 36360857
2. SENDER'S NAME: Johnson Williams
3. AMOUNT TO PICKUP: US$10,000
Go to any Money Gram office near you and pick up the payment Track the
Reference Number by visiting and click the link below
(https://secure.moneygram.com/embed/track) and enter the Reference
Number: 36360857 and the Last Name: Williams, you will find the payment
available for pickup instantly.
Yours Sincerely,
Mrs. Helen Marvis
United Nations Liaison Office
Directorate for International Payments
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-06-30 17:56 Vasiliy Kupriakov
0 siblings, 0 replies; 2775+ messages in thread
From: Vasiliy Kupriakov @ 2020-06-30 17:56 UTC (permalink / raw)
To: Corentin Chary, Darren Hart, Andy Shevchenko
Cc: Vasiliy Kupriakov,
open list:ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS,
open list:ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS,
open list
Subject: [PATCH] platform/x86: asus-wmi: allow BAT1 battery name
The battery on my laptop ASUS TUF Gaming FX706II is named BAT1.
This patch allows battery extension to load.
Signed-off-by: Vasiliy Kupriakov <rublag-ns@yandex.ru>
---
drivers/platform/x86/asus-wmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 877aade19497..8f4acdc06b13 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -441,6 +441,7 @@ static int asus_wmi_battery_add(struct power_supply *battery)
* battery is named BATT.
*/
if (strcmp(battery->desc->name, "BAT0") != 0 &&
+ strcmp(battery->desc->name, "BAT1") != 0 &&
strcmp(battery->desc->name, "BATT") != 0)
return -ENODEV;
--
2.27.0
^ permalink raw reply related [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-07-02 19:43 Barr Anthony Calder
0 siblings, 0 replies; 2775+ messages in thread
From: Barr Anthony Calder @ 2020-07-02 19:43 UTC (permalink / raw)
Dobrý den
Jsem Anthony Calder, právní zástupce z Toga. Obrátil jsem se na vás
ohledně mého pozdního klienta, Dr. Edwin, majetek fondu ve výši 2,5
milionu dolarů, který bude vrácen na váš účet. Kromě toho v této
transakci chci, abyste odpověděli důvěrně.
Anthony Calder
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-07-22 4:45 Darlehen Bedienung
0 siblings, 0 replies; 2775+ messages in thread
From: Darlehen Bedienung @ 2020-07-22 4:45 UTC (permalink / raw)
Schönen Tag,Wir sind zuverlässige, vertrauenswürdige Kreditgeber, Wir bieten Darlehen an Unternehmen und Privatpersonen zu niedrigen und günstigen Zinssatz von 2%. Sind Sie auf der Suche nach einem Business-Darlehen, persönliche Darlehen, Schuldenkonsolidierung, unbesicherte Darlehen, Venture Capital. Kontaktieren Sie uns mit Name, Land, Darlehensbetrag, Dauer und Telefonnummer.GrüßeHerr DA COSTA DARREN FAY
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-07-22 5:32 Darlehen Bedienung
0 siblings, 0 replies; 2775+ messages in thread
From: Darlehen Bedienung @ 2020-07-22 5:32 UTC (permalink / raw)
Schönen Tag,Wir sind zuverlässige, vertrauenswürdige Kreditgeber, Wir bieten Darlehen an Unternehmen und Privatpersonen zu niedrigen und günstigen Zinssatz von 2%. Sind Sie auf der Suche nach einem Business-Darlehen, persönliche Darlehen, Schuldenkonsolidierung, unbesicherte Darlehen, Venture Capital. Kontaktieren Sie uns mit Name, Land, Darlehensbetrag, Dauer und Telefonnummer.GrüßeHerr DA COSTA DARREN FAY
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-07-22 5:32 Darlehen Bedienung
0 siblings, 0 replies; 2775+ messages in thread
From: Darlehen Bedienung @ 2020-07-22 5:32 UTC (permalink / raw)
Schönen Tag,Wir sind zuverlässige, vertrauenswürdige Kreditgeber, Wir bieten Darlehen an Unternehmen und Privatpersonen zu niedrigen und günstigen Zinssatz von 2%. Sind Sie auf der Suche nach einem Business-Darlehen, persönliche Darlehen, Schuldenkonsolidierung, unbesicherte Darlehen, Venture Capital. Kontaktieren Sie uns mit Name, Land, Darlehensbetrag, Dauer und Telefonnummer.GrüßeHerr DA COSTA DARREN FAY
^ permalink raw reply [flat|nested] 2775+ messages in thread
* (unknown)
@ 2020-07-22 5:32 Darlehen Bedienung
0 siblings, 0 replies; 2775+ messages in thread
From: Darlehen Bedienung @ 2020-07-22 5:32 UTC (permalink / raw)
Schönen Tag,Wir sind zuverlässige, vertrauenswürdige Kreditgeber, Wir bieten Darlehen an Unternehmen und Privatpersonen zu niedrigen und günstigen Zinssatz von 2%. Sind Sie auf der Suche nach einem Business-Darlehen, persönliche Darlehen, Schuldenkonsolidierung, unbesicherte Darlehen, Venture Capital. Kontaktieren Sie uns mit Name, Land, Darlehensbetrag, Dauer und Telefonnummer.GrüßeHerr DA COSTA DARREN FAY
^ permalink raw reply [flat|nested] 2775+ messages in thread
end of thread, other threads:[~2020-07-22 5:40 UTC | newest]
Thread overview: 2775+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-06 7:15 (unknown), Riccardo Castellani
2005-09-06 7:59 ` Stefan
2005-09-06 8:27 ` Re: Riccardo Castellani
2005-09-06 11:00 ` Re: Stefan
2005-09-07 8:30 ` Re: Riccardo Castellani
2005-09-07 9:28 ` Re: Erik Slagter
2005-09-07 10:13 ` UDMA5 not works ! Riccardo Castellani
2005-09-08 1:21 ` Stefan
2005-09-08 7:21 ` Re: Riccardo Castellani
2005-09-08 8:06 ` Re: Stefan
2005-09-08 11:34 ` Re: Riccardo Castellani
2005-09-08 15:55 ` Re: Stefan
2005-09-19 9:19 ` UDMA5 Riccardo Castellani
2005-09-19 9:50 ` UDMA5 Stefan
2005-09-19 15:07 ` UDMA5 Riccardo Castellani
2005-09-19 15:16 ` UDMA5 Bartlomiej Zolnierkiewicz
2005-09-19 15:33 ` UDMA5 Riccardo Castellani
2005-09-19 15:36 ` UDMA5 Bartlomiej Zolnierkiewicz
2005-09-19 17:27 ` UDMA5 Riccardo Castellani
2005-09-20 7:51 ` UDMA5 Riccardo Castellani
2005-09-20 7:54 ` UDMA5 Bartlomiej Zolnierkiewicz
-- strict thread matches above, loose matches on Subject: below --
2016-07-27 13:54 (unknown), Grace Bunyan
2016-07-28 6:11 (unknown), Paul Mackerras
2016-07-28 17:49 (unknown), Ryan
2016-08-09 7:32 (unknown), Emily Deng
2016-08-09 9:13 (unknown) 关淼官
2016-08-16 1:28 (unknown), amin
[not found] <408717014.902633.1454965557404.JavaMail.yahoo.ref@mail.yahoo.com>
[not found] ` <408717014.902633.1454965557404.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1277955840.887119.1454965727829.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1341819886.1112602.1455006045307.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1746299010.1063111.1455006084503.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1924419918.1131162.1455006126767.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <574473808.1064593.1455006200750.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1538406668.1122526.1455011223052.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1355325923.1563462.1455085916039.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <2062172154.1570592.1455086059522.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1455303592.2062449.1455185619804.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1466113305.264744.1455249532530.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1814848171 .3131687.1455430041117.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1344361275.3095631.1455439500783.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1938905290.3131245.1455443543324.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1797530046.3738220.1455591918627.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <252379757.3821130.1455596018131.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <2113342289.3905001.1455609691424.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1781410726.4774971.1455771361143.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1280610037.5245744.1455856483728.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <87327952.5321188.1455865916860.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1581679466.3861.1455910014760.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <335672987.180601.1455959936964.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <657157695.179018.1455964790964.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <667348755.1209009.1456200781295.JavaMa il.yahoo@mail.yahoo.com>
[not found] ` <1171897661.1741146.1456292266271.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1311293672.1750448.1456296542532.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1800165934.2295666.1456386227641.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1513773857.2240121.1456390016126.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1323162336.263189.1456598083781.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1141013939.461556.1456687002060.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <2019037031.1109207.1456803646380.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1995703754.1172692.1456808131607.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <873125914.1145444.1456812585950.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <942327309.1237472.1456826886801.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <270482318.1243538.1456837080735.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1401090178.1623620.1456891813707.JavaMail.yahoo@mail.yahoo.com >
[not found] ` <121385488.229662.1456903423307.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <692191931.2672283.1457067057267.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <576404602.3722241.1457337965933.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <821897624.3798935.1457342931199.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <295930544.4317036.1457411020462.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1288550505.4393709.1457419240238.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1144924669.4402974.1457426901774.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <995255315.5068591.1457496276579.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1431137428.114643.1457671895976.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1275550877.554713.1457676308087.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1537001698.496441.1457724669529.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1495431901.155185.1457773746952.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <2078758598.148389.14577798 23568.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1935686072.237747.1457802584057.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1026688990.26758.1458019664905.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1780715385.26249.1458193108599.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1323533653.2983596.1458711263090.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <15921814.972786.1458973448518.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <140923808.1594146.1459153050878.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <851191700.1797537.1459185240429.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <773085057.295482.1459335976911.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1259121813.723384.1459498384288.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1861647093.719906.1459498513174.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <760918241.1191555.1459591790738.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <881015452.1791822.1459742903253.JavaMail.yahoo@mail.yahoo.co m>
[not found] ` <1148654816.13719775.1471118696031.JavaMail.yahoo@mail.yahoo.com>
2016-08-16 9:14 ` (unknown) Mrs.Margaret Smith ( Dr )
2016-08-16 23:57 (unknown), robert.berry
2016-08-17 0:13 (unknown), piwet_sokolow
2016-08-24 21:57 (unknown), mariobronti
2016-08-30 3:08 (unknown), 耿航
2016-08-30 10:42 (unknown), Charls D. Chap
2016-08-30 15:53 (unknown), Iaroslav Gridin
2016-09-05 15:21 (unknown), Christoph Hellwig
2016-09-08 5:16 (unknown), Mail Administrator
2016-09-12 10:34 (unknown), LAGOLI WARLORD
2016-09-17 8:07 (unknown), makafe david
2016-09-17 19:57 (unknown), Chris Clemons
2016-09-17 20:00 (unknown), Chris Clemons
[not found] <1249740555.16389143.1471515189580.JavaMail.yahoo.ref@mail.yahoo.com>
[not found] ` <1249740555.16389143.1471515189580.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <920606908.15987381.1471515219455.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1537974742.16091686.1471515235032.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1098530886.16525442.1471515254067.JavaMail.yahoo@mail.yahoo.com>
[not found] ` <1941288625.1334916.1472025179862@mail.yahoo.com>
[not found] ` <2067670013.1311432.1472025201570@mail.yahoo.com>
[not found] ` <1608414605.1354778.1472025217268@mail.yahoo.com>
[not found] ` <809896355.1350684.1472025233420@mail.yahoo.com>
[not found] ` <1537554030.1334943.1472030228112@mail.yahoo.com>
[not found] ` <1779128036.1357193.1472030247201@mail.yahoo.com>
[not found] ` <1342487109.1384941.1472030265072@mail.yahoo.com>
[not found] ` <1335801283.1403397.1472030282221@mail.yahoo.com>
[not found] ` <1632432391.1884441.1472102118146@mail.yahoo.com>
[not found] ` <13219 29354.1952850.1472102132113@mail.yahoo.com>
[not found] ` <221207557.1983879.1472102146083@mail.yahoo.com>
[not found] ` <1829923172.1911287.1472105995071@mail.yahoo.com>
[not found] ` <430643673.2023200.1472106012334@mail.yahoo.com>
[not found] ` <1772856888.559356.1472106027905@mail.yahoo.com>
[not found] ` <470168642.1916363.1472106041783@mail.yahoo.com>
[not found] ` <942860137.1948573.1472106061321@mail.yahoo.com>
[not found] ` <328042143.1931761.1472112659654@mail.yahoo.com>
[not found] ` <1976779095.1936539.1472112680303@mail.yahoo.com>
[not found] ` <2038854300.1965384.1472112697396@mail.yahoo.com>
[not found] ` <203915767.2003724.1472112719018@mail.yahoo.com>
[not found] ` <1929780500.1923467.1472112742262@mail.yahoo.com>
[not found] ` <621246011.2010640.1472117286429@mail.yahoo.com>
[not found] ` <194128057.2124348.1472117313038@mail.yahoo.com>
[not found] ` <1930805042.2030511.1472117346902@mail.yahoo.com>
[not found] ` <816947323.2010235.1472117372093@mail.yahoo.com>
[not found] ` <1223800539.19 35237.1472117389238@mail.yahoo.com>
[not found] ` <1605417192.31350.1472187165089@mail.yahoo.com>
[not found] ` <1519840238.26352.1472187186428@mail.yahoo.com>
[not found] ` <1096966040.34497.1472187203002@mail.yahoo.com>
[not found] ` <1176299802.43210.1472187218371@mail.yahoo.com>
[not found] ` <1145424213.48927.1472187232490@mail.yahoo.com>
[not found] ` <315585985.63900.1472196007133@mail.yahoo.com>
[not found] ` <1369907991.84416.1472196020751@mail.yahoo.com>
[not found] ` <1692090006.59593.1472196052067@mail.yahoo.com>
[not found] ` <291225058.84294.1472196068404@mail.yahoo.com>
[not found] ` <841947568.62568.1472196085133@mail.yahoo.com>
[not found] ` <703085992.104994.1472200924073@mail.yahoo.com>
[not found] ` <1738813606.80866.1472200940271@mail.yahoo.com>
[not found] ` <1775047595.85116.1472200959473@mail.yahoo.com>
[not found] ` <1553994021.82768.1472200999267@mail.yahoo.com>
[not found] ` <603777037.111400.1472204562353@mail.yahoo.com>
[not found] ` <1681180499.110256.1472204593205@mail.yahoo.c om>
[not found] ` <308936477.98347.1472204625927@mail.yahoo.com>
[not found] ` <947888928.562179.1472279131640@mail.yahoo.com>
[not found] ` <1077632171.560841.1472279148757@mail.yahoo.com>
[not found] ` <1727892514.582284.1472279168805@mail.yahoo.com>
[not found] ` <807733506.560811.1472279185459@mail.yahoo.com>
[not found] ` <1829342731.586404.1472279200847@mail.yahoo.com>
[not found] ` <1929565899.571736.1472289675967@mail.yahoo.com>
[not found] ` <1341948909.567943.1472289703270@mail.yahoo.com>
[not found] ` <1168187996.584432.1472289718801@mail.yahoo.com>
[not found] ` <33608004.570956.1472289741584@mail.yahoo.com>
[not found] ` <708478022.215689.1472799838163@mail.yahoo.com>
[not found] ` <1967477873.198576.1472799857165@mail.yahoo.com>
[not found] ` <763921077.227783.1472799873452@mail.yahoo.com>
[not found] ` <1090688665.206675.1472799890277@mail.yahoo.com>
[not found] ` <2129545986.226127.1472799909633@mail.yahoo.com>
[not found] ` <272763708.247613.1472804760727@mail.yahoo.com>
[not found] ` <1779747759.205910. 1472804784264@mail.yahoo.com>
[not found] ` <62467449.237331.1472804810999@mail.yahoo.com>
[not found] ` <971894486.246656.1472808943466@mail.yahoo.com>
[not found] ` <1969985331.222893.1472808958827@mail.yahoo.com>
[not found] ` <2146019452.252192.1472808972644@mail.yahoo.com>
[not found] ` <106985900.229797.1472808991310@mail.yahoo.com>
[not found] ` <564994722.692847.1472880528414@mail.yahoo.com>
[not found] ` <777232982.692063.1472880555365@mail.yahoo.com>
[not found] ` <1501060496.707218.1472880582226@mail.yahoo.com>
[not found] ` <1324346780.696863.1472880621214@mail.yahoo.com>
[not found] ` <1931137568.747704.1472889905209@mail.yahoo.com>
[not found] ` <1639543181.687684.1472889922698@mail.yahoo.com>
[not found] ` <1994710530.696256.1472889982338@mail.yahoo.com>
[not found] ` <2021258317.714163.1472890095759@mail.yahoo.com>
[not found] ` <2119783902.967363.1472974164580@mail.yahoo.com>
[not found] ` <1424346352.1001634.1472974180415@mail.yahoo.com>
[not found] ` <530744527.2590518.1475126328411@mail.yahoo.com>
2016-09-29 5:20 ` (unknown) Angela Kinto
2016-09-30 14:37 (unknown), Maxime Ripard
2016-10-11 3:08 (unknown), 李 剑宇
2016-10-21 3:49 (unknown), alters
2016-10-21 6:09 (unknown), paloma.depping
2016-10-22 3:42 (unknown), h.gerritsen12
2016-10-22 10:32 (unknown), brucet
2016-10-22 14:52 (unknown), ifalqi
2016-10-22 17:11 (unknown), Aisha Aisha
2016-10-22 18:26 (unknown), rueggemann
2016-10-22 21:34 (unknown), richard
2016-10-23 0:53 (unknown), office
2016-10-23 3:08 (unknown), h.gerritsen12
2016-10-23 3:55 (unknown), patientcentral
2016-10-23 18:32 (unknown), alters
2016-10-24 2:58 (unknown), horizon
2016-10-24 5:59 (unknown), kgbok.kezyhumh
2016-10-24 13:32 (unknown), j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
2016-10-25 17:17 (unknown), mariobronti
2016-10-26 0:20 (unknown), eumann
2016-10-28 20:45 (unknown), Heliogabalo Santos Jugon
2016-10-31 12:51 (unknown), Debra_Farmer/SSB/HIDOE-CJ/7EgCimzc+ygjh5cb8Nw
2016-10-31 12:51 (unknown), Debra_Farmer/SSB/HIDOE
2016-11-06 21:00 (unknown), Dennis Dataopslag
2016-11-14 21:31 (unknown), 5415306259-PhIK+mYhcR9sDcysRhXauQC/G2K4zDHf
2016-11-15 20:29 (unknown) Christoph Lameter
2016-11-20 22:16 (unknown), Mr Friedrich Mayrhofer
2016-11-25 22:48 (unknown), jacqueline.pike
2016-11-26 17:47 (unknown), gillian.murray
2016-11-27 3:07 (unknown), molino.petrone
2016-11-27 7:04 (unknown), obsexitos
2016-11-27 14:25 (unknown), beautyink
2016-11-27 16:53 (unknown), horizon
2016-11-28 9:58 (unknown), Mr Friedrich Mayrhofer
2016-11-29 2:37 (unknown), sophie.norman
2016-11-29 5:51 (unknown), h.piontek
2016-11-29 9:58 (unknown), cl_luzcc
2016-11-29 10:12 (unknown), carmen.croonquist
2016-11-30 9:15 (unknown), ajae
2016-11-30 20:44 (unknown), jeffrey.faulkenberg
2016-12-03 10:16 (unknown), zumbalisa
2016-12-03 17:18 (unknown), lswedroe
2016-12-03 19:41 (unknown), muirs
2016-12-03 20:56 (unknown), kgbok.kezyhumh
2016-12-07 15:52 (unknown), zumbalisa
2016-12-08 14:58 (unknown), edo.hlaca
2016-12-10 13:31 (unknown), wwdkins-mEDtAoEtxfxHdm1AoWelKu1ftBKYq+Ku
2016-12-11 18:14 (unknown), kholloway
2016-12-11 18:20 (unknown), cl_luzcc
2016-12-12 3:36 (unknown), angers
2016-12-13 23:26 (unknown), wesley.sydnor
2016-12-14 2:45 (unknown), Mr Friedrich Mayrhofer
2016-12-14 2:45 (unknown), Mr Friedrich Mayrhofer
2016-12-14 3:54 (unknown), Mr Friedrich Mayrhofer
2016-12-14 9:45 (unknown), Mr Friedrich Mayrhofer
2016-12-14 9:45 (unknown), Mr Friedrich Mayrhofer
2016-12-14 13:00 (unknown), robert.berry
2016-12-14 14:58 (unknown), Joshua McBeth
2016-12-14 18:22 (unknown), witt.kohl
[not found] <152583889.382342.1478184993559.ref@mail.yahoo.com>
[not found] ` <152583889.382342.1478184993559@mail.yahoo.com>
[not found] ` <1547959668.417377.1478185034164@mail.yahoo.com>
[not found] ` <206782935.414340.1478185069845@mail.yahoo.com>
[not found] ` <667421952.434511.1478185106935@mail.yahoo.com>
[not found] ` <1786845090.666148.1478205106655@mail.yahoo.com>
[not found] ` <1387003658.653472.1478205145258@mail.yahoo.com>
[not found] ` <1350310187.673892.1478205187452@mail.yahoo.com>
[not found] ` <1927144796.669909.1478205273021@mail.yahoo.com>
[not found] ` <770637240.673743.1478205332998@mail.yahoo.com>
[not found] ` <1205977517.99065.1478258340638@mail.yahoo.com>
[not found] ` <1042275727.94825.1478258382054@mail.yahoo.com>
[not found] ` <1186148391.97088.1478258431475@mail.yahoo.com>
[not found] ` <540003842.98626.1478258481912@mail.yahoo.com>
[not found] ` <1776892514.458933.1478292657407@mail.yahoo.com>
[not found] ` <910374413.446595.1478292700767@mail.yahoo.com>
[not found] ` <1033537636 .471106.1478292746133@mail.yahoo.com>
[not found] ` <1578798575.461247.1478292784720@mail.yahoo.com>
[not found] ` <316999641.639628.1478331115919@mail.yahoo.com>
[not found] ` <1634561779.645785.1478331329592@mail.yahoo.com>
[not found] ` <652190874.648036.1478331364669@mail.yahoo.com>
[not found] ` <796987689.651522.1478331398026@mail.yahoo.com>
[not found] ` <370297196.684013.1478345814427@mail.yahoo.com>
[not found] ` <1327936682.685260.1478345852532@mail.yahoo.com>
[not found] ` <1237117032.688100.1478345888887@mail.yahoo.com>
[not found] ` <572400396.693429.1478345923555@mail.yahoo.com>
[not found] ` <840845294.675368.1478345959549@mail.yahoo.com>
[not found] ` <791475444.850371.1478376525381@mail.yahoo.com>
[not found] ` <1412571031.855782.1478376584075@mail.yahoo.com>
[not found] ` <1298577069.832980.1478376622212@mail.yahoo.com>
[not found] ` <1977620743.1114958.1478455802086@mail.yahoo.com>
[not found] ` <1319706072.1129174.1478455845954@mail.yahoo.com>
[not found] ` <479243351.1142182.14784559006 32@mail.yahoo.com>
[not found] ` <1934450741.682053.1478455944740@mail.yahoo.com>
[not found] ` <1837659574.1139834.1478455987796@mail.yahoo.com>
[not found] ` <961753461.1152951.1478461944980@mail.yahoo.com>
[not found] ` <1992937818.1159539.1478462009994@mail.yahoo.com>
[not found] ` <510276422.1164948.1478462064540@mail.yahoo.com>
[not found] ` <1577167405.1172301.1478462105757@mail.yahoo.com>
[not found] ` <821568642.1445110.1478510331051@mail.yahoo.com>
[not found] ` <301541403.1465105.1478510366097@mail.yahoo.com>
[not found] ` <496567105.1458237.1478510401507@mail.yahoo.com>
[not found] ` <1640837254.1442076.1478510438315@mail.yahoo.com>
[not found] ` <1112741915.1445889.1478510477247@mail.yahoo.com>
[not found] ` <1770984020.1488647.1478516629610@mail.yahoo.com>
[not found] ` <51525828.1471442.1478516665508@mail.yahoo.com>
[not found] ` <1027372309.1472506.1478516703010@mail.yahoo.com>
[not found] ` <400504123.13440.1478597095307@mail.yahoo.com>
[not found] ` <1478525497.317519.1478597187816@mail.ya hoo.com>
[not found] ` <516287220.316763.1478597232875@mail.yahoo.com>
[not found] ` <904955912.13718.1478597276986@mail.yahoo.com>
[not found] ` <1351049978.326290.1478597332656@mail.yahoo.com>
[not found] ` <96171090.393011.1478607998570@mail.yahoo.com>
[not found] ` <593913772.390254.1478608068865@mail.yahoo.com>
[not found] ` <1707350386.429988.1478608133264@mail.yahoo.com>
[not found] ` <1543963385.79921.1478608195421@mail.yahoo.com>
[not found] ` <1191055035.1337226.1478806214519@mail.yahoo.com>
[not found] ` <955462395.1348606.1478806257554@mail.yahoo.com>
[not found] ` <368088796.1337488.1478806293339@mail.yahoo.com>
[not found] ` <1743828954.1359460.1478806350049@mail.yahoo.com>
[not found] ` <1553587848.1738775.1478864477937@mail.yahoo.com>
[not found] ` <1154226435.1754754.1478864525489@mail.yahoo.com>
[not found] ` <2071624141.1736824.1478864572207@mail.yahoo.com>
[not found] ` <1898761471.1755196.1478864646841@mail.yahoo.com>
[not found] ` <81175066.1739908.1478864689507@mail.yahoo.com>
[not found] ` <177912 2771.2457415.1478978961969@mail.yahoo.com>
[not found] ` <1694701793.2456599.1478978999723@mail.yahoo.com>
[not found] ` <1485250094.2427753.1478979037036@mail.yahoo.com>
[not found] ` <1752716249.2435001.1478979076188@mail.yahoo.com>
[not found] ` <2112163844.2456483.1478986052937@mail.yahoo.com>
[not found] ` <264461817.2469827.1478986084294@mail.yahoo.com>
[not found] ` <676001606.2450817.1478986117800@mail.yahoo.com>
[not found] ` <883610727.2470595.1478986156013@mail.yahoo.com>
[not found] ` <1136015566.2451136.1478986189586@mail.yahoo.com>
[not found] ` <430794130.3089199.1479122569643@mail.yahoo.com>
[not found] ` <229779237.3081351.1479122627866@mail.yahoo.com>
[not found] ` <817581515.3122074.1479122714436@mail.yahoo.com>
[not found] ` <1032333282.3113756.1479122765944@mail.yahoo.com>
[not found] ` <641526461.57602.1479205098518@mail.yahoo.com>
[not found] ` <996927858.51795.1479205173243@mail.yahoo.com>
[not found] ` <1831492678.64650.1479205218683@mail.yahoo.com>
[not found] ` <2129880108.2758945.1481742997077@mail.yahoo.com>
2016-12-14 19:17 ` (unknown) MINERALS & ENERGY
2016-12-16 10:46 (unknown), системы администратор
2016-12-16 10:46 (unknown), системы администратор
2016-12-18 0:32 (unknown), linux-raid
2016-12-18 10:35 (unknown), linux-crypto
2016-12-18 15:49 (unknown), linux-input
2016-12-20 8:38 (unknown), Jinpu Wang
2016-12-22 9:16 (unknown), rhsinfo
2016-12-23 22:23 (unknown), mpr.Microsoft
2016-12-25 16:42 (unknown), rlm85310
2016-12-26 10:49 (unknown), zumbalisa
2016-12-28 6:56 (unknown), kathleen.gilbert
2016-12-29 22:55 (unknown), beautyink
2017-01-03 6:48 (unknown), системы администратор
2017-01-03 6:48 (unknown), системы администратор
2017-01-03 6:48 (unknown), системы администратор
2017-01-03 6:48 (unknown), системы администратор
2017-01-03 6:57 (unknown), системы администратор
2017-01-03 6:57 (unknown), системы администратор
2017-01-09 11:33 [PATCH v2 0/7] uapi: export all headers under uapi directories Arnd Bergmann
2017-01-13 10:46 ` [PATCH v3 0/8] " Nicolas Dichtel
2017-01-13 10:46 ` [PATCH v3 1/8] arm: put types.h in uapi Nicolas Dichtel
2017-01-13 15:36 ` (unknown) David Howells
2017-01-13 15:36 ` (unknown) David Howells
2017-01-09 12:18 (unknown), anthonia
2017-01-11 2:43 (unknown), info
2017-01-11 12:54 (unknown), info
2017-01-13 7:50 (unknown), koopk
2017-01-13 11:28 (unknown), service
2017-01-15 19:56 (unknown) Sergey Polovko
2017-01-17 5:18 (unknown), Andy Lutomirski
2017-01-19 4:56 (unknown), archerrp
2017-01-19 12:35 (unknown), sterrenplan.kampen
2017-01-20 5:18 (unknown), x1kn8fk
2017-01-20 8:12 (unknown), sorbisches.internat
2017-01-21 6:51 (unknown), sterrenplan.kampen
2017-01-21 9:48 (unknown), armouralumni
2017-01-21 17:47 (unknown), amit mahadik
2017-01-21 23:57 (unknown), hp
2017-01-22 20:22 (unknown), bflove1-ntQ8I44N4zM
2017-01-22 20:23 (unknown), citydesk
2017-01-22 21:52 (unknown), beautyink
2017-01-23 0:35 (unknown), sreuter
2017-01-23 14:54 (unknown), nhossein4212003
2017-01-25 8:24 (unknown), bunny43200
2017-01-25 9:27 (unknown), clasico082
2017-01-25 14:50 (unknown), a.skucha
2017-01-27 18:14 (unknown), Gideon Israel Dsouza
2017-01-30 23:36 (unknown), paloma.depping
2017-01-31 7:58 (unknown), Andy Gross
2017-02-01 10:28 (unknown), sophie.norman
2017-02-01 11:16 (unknown), board
2017-02-07 8:12 (unknown), Anders Lind
2017-02-10 12:17 (unknown), Tom St Denis
2017-02-16 20:59 (unknown), Qin's Yanjun
2017-02-16 21:01 (unknown), Qin's Yanjun
2017-02-21 4:09 (unknown), eumann
2017-02-21 6:46 (unknown), koopk
[not found] <1771828252.1867143.1486725329404.ref@mail.yahoo.com>
[not found] ` <1771828252.1867143.1486725329404@mail.yahoo.com>
[not found] ` <362116259.1841028.1486725756488@mail.yahoo.com>
[not found] ` <1418971482.1876011.1486725827782@mail.yahoo.com>
[not found] ` <781770619.1914371.1486725880495@mail.yahoo.com>
[not found] ` <1842722123.458239.1486738412986@mail.yahoo.com>
[not found] ` <1988971450.1919957.1486738465269@mail.yahoo.com>
[not found] ` <2009483472.1959807.1486738532101@mail.yahoo.com>
[not found] ` <700044894.458801.1486738592344@mail.yahoo.com>
[not found] ` <1679468659.1943183.1486738646052@mail.yahoo.com>
[not found] ` <162360655.2032263.1486743641678@mail.yahoo.com>
[not found] ` <1111317252.1888703.1486743688716@mail.yahoo.com>
[not found] ` <845911663.2021263.1486743732973@mail.yahoo.com>
[not found] ` <2098808266.2026487.1486743776423@mail.yahoo.com>
[not found] ` <568782206.2040087.1486743821882@mail.yahoo.com>
[not found] ` <19843461.2458888.1486807264129@mail.yahoo .com>
[not found] ` <641276465.2418779.1486807323305@mail.yahoo.com>
[not found] ` <390323133.2325381.1486807369870@mail.yahoo.com>
[not found] ` <1403941115.2453941.1486807413560@mail.yahoo.com>
[not found] ` <1277591292.2446250.1486807455917@mail.yahoo.com>
[not found] ` <1213689794.2466613.1486815359337@mail.yahoo.com>
[not found] ` <329782595.2476773.1486815413044@mail.yahoo.com>
[not found] ` <1973633957.2390033.1486815459726@mail.yahoo.com>
[not found] ` <1477693835.2468079.1486815506109@mail.yahoo.com>
[not found] ` <1808615318.2452083.1486815556720@mail.yahoo.com>
[not found] ` <603828148.2508650.1486823074184@mail.yahoo.com>
[not found] ` <1787007361.2513644.1486823124149@mail.yahoo.com>
[not found] ` <845262684.2377129.1486823170993@mail.yahoo.com>
[not found] ` <419777068.2512512.1486823225012@mail.yahoo.com>
[not found] ` <232385099.2515850.1486830177167@mail.yahoo.com>
[not found] ` <218971376.2576178.1486830217194@mail.yahoo.com>
[not found] ` <2021140041.2546157.1486830247344@mail.yahoo.com>
[not found] ` <448230626.2487309.1486830282386@mail.yahoo.com>
[not found] ` <2079672177.2544802.1486830312151@mail.yahoo.com>
[not found] ` <1630849281.2540966.1486902595035@mail.yahoo.com>
[not found] ` <1763670160.2830682.1486902646696@mail.yahoo.com>
[not found] ` <964451657.2841851.1486902695591@mail.yahoo.com>
[not found] ` <516693761.2834417.1486902743162@mail.yahoo.com>
[not found] ` <461796533.2811268.1486902801495@mail.yahoo.com>
[not found] ` <713444900.2811703.1486907914861@mail.yahoo.com>
[not found] ` <302588613.2808166.1486907951385@mail.yahoo.com>
[not found] ` <1622557777.1213917.1486907992370@mail.yahoo.com>
[not found] ` <2064564951.2810235.1486908043751@mail.yahoo.com>
[not found] ` <442326396.3090755.1486973430527@mail.yahoo.com>
[not found] ` <518762456.3172842.1486973474413@mail.yahoo.com>
[not found] ` <522771675.3250061.1486973515470@mail.yahoo.com>
[not found] ` <1528572129.3231295.1486973562972@mail.yahoo.com>
[not found] ` <1997972092.3216726.1486973619057@mail.yahoo.com>
[not found] ` <172315 5515.3200469.1486978792361@mail.yahoo.com>
[not found] ` <1535140240.3250394.1486978848738@mail.yahoo.com>
[not found] ` <1684778328.3209409.1486978901145@mail.yahoo.com>
[not found] ` <1677088215.3214109.1486978951402@mail.yahoo.com>
[not found] ` <864043271.2969648.1486979004523@mail.yahoo.com>
[not found] ` <1363436970.3248457.1486985168733@mail.yahoo.com>
[not found] ` <988334087.3285220.1486985218306@mail.yahoo.com>
[not found] ` <1927028744.3292897.1486985258054@mail.yahoo.com>
[not found] ` <841727306.3314561.1486985306658@mail.yahoo.com>
[not found] ` <1530267099.3983583.1487060768443@mail.yahoo.com>
[not found] ` <739265803.3926080.1487060816047@mail.yahoo.com>
[not found] ` <1513400527.3968180.1487060856715@mail.yahoo.com>
[not found] ` <531389155.4002715.1487060905075@mail.yahoo.com>
[not found] ` <895049946.4061735.1487060954342@mail.yahoo.com>
[not found] ` <1784122856.4044434.1487065908235@mail.yahoo.com>
[not found] ` <1407078631.4020482.1487065957415@mail.yahoo.com>
[not found] ` <1839327034 .4067597.1487065997225@mail.yahoo.com>
[not found] ` <810244449.4029107.1487066033810@mail.yahoo.com>
[not found] ` <1095781515.608534.1487066088438@mail.yahoo.com>
[not found] ` <106819403.4076657.1487073151896@mail.yahoo.com>
[not found] ` <389117608.4110828.1487073193205@mail.yahoo.com>
[not found] ` <386158465.4086294.1487073241229@mail.yahoo.com>
[not found] ` <955001158.3929300.1487073321885@mail.yahoo.com>
[not found] ` <701155907.390358.1487239942052@mail.yahoo.com>
[not found] ` <83923247.405083.1487239972689@mail.yahoo.com>
[not found] ` <1733323291.394405.1487240008443@mail.yahoo.com>
[not found] ` <1295161698.440984.1487248883658@mail.yahoo.com>
[not found] ` <1210050213.428345.1487248904890@mail.yahoo.com>
[not found] ` <631568915.469124.1487248931915@mail.yahoo.com>
[not found] ` <287722.487339.1487248955653@mail.yahoo.com>
[not found] ` <1417564216.1088735.1487316834261@mail.yahoo.com>
[not found] ` <713636483.1053558.1487316903911@mail.yahoo.com>
[not found] ` <763613544.2280970.1487739924449@mail.yahoo.com>
2017-02-22 5:06 ` (unknown) DR ANDASON PHILLIP
2017-02-23 14:31 (unknown), tao chang
2017-03-02 14:44 (unknown), Casperina Litaay
2017-03-02 15:55 (unknown), nikita.gerasimov
2017-03-10 17:34 (unknown), Tomi Maila
2017-03-11 21:59 (unknown), Karl Aichniger
2017-03-14 17:14 (unknown), nkosuta-f+iqBESB6gc
2017-03-14 21:58 (unknown), indulge-HCInDj6vYHrk4FeknX8I/ZqQE7yCjDx5
2017-03-14 23:24 (unknown), nhossein4212003
2017-03-15 2:52 (unknown), wesley.sydnor
2017-03-15 3:26 (unknown), befragung
2017-03-15 3:58 (unknown), beautyink
2017-03-15 5:22 (unknown), office
2017-03-15 7:30 (unknown), h.gerritsen12
2017-03-20 0:26 (unknown), Qing Chang
2017-03-20 2:25 (unknown), Rick Lee
2017-03-20 19:40 (unknown), janepatrick00-VmEwxm1hRrAnxqbYAscKCQ
2017-03-20 19:40 (unknown), janepatrick00-VmEwxm1hRrAnxqbYAscKCQ
2017-03-21 6:58 (unknown) Piotr Sroka
2017-03-23 17:07 (unknown), Ning Yao
2017-03-28 21:11 (unknown), George Papadrosou
2017-03-30 10:55 (unknown), Sandeepa Prabhu
2017-04-03 6:14 (unknown), Adrian Gillian Bayford
2017-04-03 6:14 (unknown), Adrian Gillian Bayford
2017-04-04 19:31 (unknown), Kristi Nikolla
2017-04-05 16:35 (unknown), bunny43200
2017-04-05 16:53 (unknown), dowen
2017-04-05 17:06 (unknown), kgbok.kezyhumh
2017-04-05 17:30 (unknown), sekretariat.mzagorski-40QDpL200RxmR6Xm/wNWPw
2017-04-05 18:10 (unknown), alters
2017-04-06 6:03 (unknown), bendis.michal
2017-04-06 8:19 (unknown), bendis.michal
2017-04-06 11:45 (unknown), j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
2017-04-06 13:43 (unknown), agiva
2017-04-06 13:49 (unknown), benjamin
2017-04-06 14:05 (unknown), jacqueline.pike
2017-04-06 19:09 (unknown), David Buckley
2017-04-08 19:20 (unknown), jbmplupus-Mmb7MZpHnFY
2017-04-09 0:27 (unknown), simon.a.t.hardy
2017-04-09 2:11 (unknown), jacqueline.pike
2017-04-09 6:12 (unknown), roeper
2017-04-09 14:11 (unknown), carmen.croonquist
2017-04-09 14:27 (unknown), weingart
2017-04-09 15:30 (unknown), jha
2017-04-09 20:48 (unknown), simon.a.t.hardy
2017-04-09 21:15 (unknown), ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
2017-04-09 22:03 (unknown), zem.uchastok
2017-04-09 22:07 (unknown) askeeta
2017-04-10 0:41 (unknown), amin
2017-04-10 3:30 (unknown), hp
2017-04-10 5:46 (unknown), archerrp
2017-04-10 6:51 (unknown), kathleen.gilbert
2017-04-10 8:37 (unknown), kkaplanidou
2017-04-10 10:18 (unknown), rueggemann
2017-04-10 11:47 (unknown), office
2017-04-13 15:58 (unknown), Scott Ellentuch
2017-04-15 13:53 (unknown), smallgroups
2017-04-15 14:16 (unknown), demorton
2017-04-15 15:00 (unknown), jbmplupus-Mmb7MZpHnFY
2017-04-16 3:17 (unknown), resson-epfaOiJH9AY
2017-04-16 3:33 (unknown), ohnesorge-wiek
2017-04-16 6:21 (unknown), shwx002
2017-04-16 8:21 (unknown), jha
2017-04-16 8:52 (unknown), geir.nuland
2017-04-16 15:48 (unknown), redbeardcharters
2017-04-16 16:31 (unknown), a.skucha
2017-04-16 16:37 (unknown), bfoster
2017-04-16 17:41 (unknown) askeeta
2017-04-16 17:44 (unknown), bkjf
2017-04-16 17:49 (unknown), zem.uchastok
2017-04-16 18:30 (unknown), r67
2017-04-16 18:32 (unknown), nathalie.colle
2017-04-16 19:08 (unknown), athgregory
2017-04-16 20:59 (unknown), mitch_128
2017-04-16 21:22 (unknown), ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
2017-04-16 22:46 (unknown), tammyehood
2017-04-16 23:02 (unknown), brian
2017-04-16 23:57 (unknown), muirs
2017-04-17 0:43 (unknown), John Ewalt
2017-04-17 2:06 (unknown), rlm85310
2017-04-17 2:26 (unknown), wvhyvcm.abyxg
2017-04-17 3:09 (unknown), bunny43200
2017-04-17 3:38 (unknown), kgbok.kezyhumh
2017-04-17 4:06 (unknown), nkosuta-f+iqBESB6gc
2017-04-17 7:56 (unknown), lucia.germino
2017-04-17 15:20 (unknown), tchidrenplytoo
2017-04-17 18:00 (unknown), j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
2017-04-18 2:53 (unknown), h.piontek
2017-04-18 10:57 (unknown) catherine.verge
2017-04-18 16:05 (unknown), rlm85310
2017-04-19 16:38 (unknown), amin
2017-04-19 20:46 (unknown), hp
2017-04-20 6:33 (unknown), rueggemann
2017-04-20 12:28 (unknown), h.gerritsen12
2017-04-21 7:38 (unknown), wesley.sydnor
2017-04-21 8:36 (unknown), joseph.x.hronec
2017-04-21 9:25 (unknown), delaware.orders
2017-04-21 9:51 (unknown), Kredit
2017-04-21 11:49 (unknown), kathleen.gilbert
2017-04-21 16:59 (unknown) Mr.Jerry Smith
2017-04-21 17:06 (unknown), Mr.Jerry Smith
2017-04-21 17:07 (unknown), Mr.Jerry Smith
2017-04-21 17:24 (unknown), Mr.Jerry Smith
2017-04-21 17:40 (unknown), Mr.Jerry Smith
2017-04-21 17:44 (unknown), Mr.Jerry Smith
2017-04-21 17:54 (unknown), Mr.Jerry Smith
2017-04-26 7:36 (unknown), glolariu
2017-04-26 11:54 (unknown) Shalini Chellathurai Saroja
2017-04-28 8:20 (unknown), Anatolij Gustschin
2017-04-28 8:36 (unknown), администратор
2017-04-28 8:36 (unknown), администратор
2017-04-28 8:36 (unknown), администратор
2017-04-28 8:36 (unknown), администратор
2017-05-01 18:59 [PATCHv2 1/1] IB/ipoib: add get_settings in ethtool Doug Ledford
[not found] ` <1493665155.3041.186.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2017-05-04 5:24 ` (unknown), Zhu Yanjun
2017-05-04 13:20 (unknown), Steve French
2017-05-11 1:02 (unknown), info
2017-05-14 3:19 (unknown), unixkeeper
2017-05-16 3:06 (unknown), armiksanaye
2017-05-17 7:10 (unknown), 1.10.0812112155390.21775
2017-05-18 13:40 (unknown), hp
2017-05-18 13:41 (unknown), alters
2017-05-18 14:13 (unknown), agiva
2017-05-18 16:47 (unknown), susan.christian
2017-05-18 19:22 (unknown), lucia.germino
2017-05-19 4:32 (unknown), archerrp
2017-05-19 6:45 (unknown), j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
2017-05-19 11:45 (unknown), counselling-30L6jp03H7UtpYsHHOQ6Llpr/1R2p/CL
2017-05-19 13:31 (unknown), office
2017-05-19 14:51 (unknown), citydesk
2017-05-19 15:35 (unknown), susan.christian
2017-05-19 16:59 (unknown), zumbalisa
2017-05-20 0:26 (unknown), brian
2017-05-20 0:40 (unknown), sophie.norman
2017-05-20 1:09 (unknown), board
2017-05-20 8:14 (unknown), ecaterinasuciu09
2017-05-20 9:40 (unknown), mgriffit
2017-05-20 11:03 (unknown), pohut00
2017-05-20 11:47 (unknown), john.dahlberg
2017-05-20 12:27 (unknown), ajae
2017-05-20 14:29 (unknown), cv
2017-05-20 16:22 (unknown), alters
2017-05-20 17:45 (unknown), counselling-30L6jp03H7UtpYsHHOQ6Llpr/1R2p/CL
2017-05-20 18:58 (unknown), office
2017-05-20 20:00 (unknown), citydesk
2017-05-20 21:16 (unknown), h.gerritsen12
2017-05-21 8:42 (unknown), brucet
2017-05-21 8:55 (unknown), agiva
2017-05-21 8:55 (unknown), benjamin
2017-05-21 9:17 (unknown), jacqueline.pike
2017-05-21 11:13 (unknown), mariobronti
2017-05-21 11:38 (unknown), susan.christian
2017-05-21 13:56 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-05-21 16:36 (unknown), x1kn8fk
2017-05-21 20:35 (unknown), armiksanaye
2017-05-22 16:10 (unknown), mitch_128
2017-05-22 20:39 (unknown), horizon
2017-05-22 22:32 (unknown), patientcentral
2017-05-23 2:19 (unknown), mdavis
2017-05-23 4:53 (unknown), nfrankiyamu
2017-05-23 8:42 (unknown), delaware.orders
2017-05-23 9:36 (unknown), bendis.michal
2017-05-23 16:24 (unknown), agiva
2017-05-23 16:29 (unknown), benjamin
2017-05-23 22:44 (unknown), noord-holland
2017-05-24 16:26 (unknown), natasha.glauser
2017-05-26 16:33 (unknown) Anderson McEnany <
2017-05-26 16:33 (unknown) Anderson McEnany <
2017-05-31 11:36 (unknown), p.mueller-spz-hgw-Mmb7MZpHnFY
2017-05-31 14:53 (unknown), tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
2017-06-01 0:43 (unknown), armouralumni
2017-06-01 1:55 (unknown), cdevries
2017-06-01 2:25 (unknown), kbennett
2017-06-01 2:26 (unknown), Dave Airlie
2017-06-01 20:40 (unknown), nbensoncole81
2017-06-02 8:02 (unknown), jessica.jones-PnMVE5gNl/Vkbu+0n/iG1Q
2017-06-03 5:45 (unknown), nfrankiyamu
2017-06-03 7:17 (unknown), nbensoncole81
2017-06-04 19:55 (unknown), archerrp
2017-06-05 1:08 (unknown), rueggemann
2017-06-05 4:30 (unknown), citydesk
2017-06-05 5:43 (unknown), h.gerritsen12
2017-06-05 17:32 (unknown), armouralumni
2017-06-06 7:19 (unknown), From Lori J. Robinson
2017-06-06 7:19 (unknown), From Lori J. Robinson
2017-06-06 7:19 (unknown), From Lori J. Robinson
2017-06-06 7:19 (unknown), From Lori J. Robinson
2017-06-06 20:36 (unknown), dengx
2017-06-06 23:46 (unknown), mdavis
2017-06-07 3:19 (unknown), lucia.germino
2017-06-07 11:43 (unknown), nhossein4212003
2017-06-07 14:00 (unknown), 1.10.0812112155390.21775
2017-06-07 22:30 (unknown), tammyehood
2017-06-08 3:14 (unknown), kgbok.kezyhumh
2017-06-08 5:00 (unknown), noord-holland
2017-06-08 12:51 (unknown), koopk
2017-06-08 14:09 (unknown), service
2017-06-08 15:18 (unknown), junplzen
2017-06-08 17:26 (unknown), natasha.glauser
2017-06-08 18:00 (unknown), beautyink
2017-06-09 0:34 (unknown), richard
2017-06-09 0:39 (unknown), susan.christian
2017-06-09 1:31 (unknown), durrant
2017-06-09 2:06 (unknown), rueggemann
2017-06-09 3:35 (unknown), office
2017-06-09 4:30 (unknown), citydesk
2017-06-09 8:02 (unknown), kholloway
2017-06-09 10:47 (unknown), tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
2017-06-09 17:38 (unknown), nfrankiyamu
2017-06-09 18:57 (unknown), editor
2017-06-09 19:04 (unknown), armouralumni
2017-06-10 5:29 (unknown), agiva
2017-06-10 5:53 (unknown), jacqueline.pike
2017-06-10 7:07 (unknown), Youichi Kanno
2017-06-10 13:33 (unknown), iker-KvP5wT2u2U0
2017-06-10 14:34 (unknown), kbennett
2017-06-10 20:24 (unknown), board
2017-06-10 21:10 (unknown), mbalhoff
2017-06-11 0:20 (unknown), service
2017-06-11 3:28 (unknown), redaccion
2017-06-11 4:42 (unknown), 1.10.0812112155390.21775
2017-06-11 7:27 (unknown), roeper
2017-06-11 16:35 (unknown), mitch_128
2017-06-11 18:16 (unknown), tammyehood
2017-06-12 7:28 (unknown), webmaster
2017-06-12 10:50 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-06-12 15:02 (unknown), amin
2017-06-12 16:44 (unknown), nfrankiyamu
2017-06-12 17:13 (unknown), armiksanaye
2017-06-12 19:12 (unknown), nhossein4212003
2017-06-12 21:36 (unknown), nbensoncole81
2017-06-13 4:22 (unknown), mitch_128
2017-06-13 4:35 (unknown), ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
2017-06-13 4:53 (unknown), roeper
2017-06-13 8:14 (unknown), horizon
2017-06-13 9:35 (unknown), wvhyvcm.abyxg
2017-06-13 9:59 (unknown), lizdebeth_
2017-06-13 10:15 (unknown), nenep
2017-06-13 11:59 (unknown), susan.christian
2017-06-13 21:38 (unknown), douille.l
2017-06-14 1:06 (unknown), durrant
2017-06-14 10:27 (unknown), susan.christian
2017-06-14 11:42 (unknown), sophie.norman
2017-06-14 12:26 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-06-14 12:27 (unknown), board
2017-06-14 16:39 (unknown), nfrankiyamu
2017-06-14 19:31 (unknown), kholloway
2017-06-14 20:41 (unknown), angers
2017-06-14 21:25 (unknown), koopk
2017-06-14 22:19 (unknown), muirs
2017-06-15 8:37 (unknown), ecaterinasuciu09
2017-06-15 13:50 (unknown), pohut00
2017-06-15 14:56 (unknown), john.dahlberg
2017-06-15 17:35 (unknown), jeffrey.faulkenberg
2017-06-16 14:46 (unknown), roeper
2017-06-17 22:46 (unknown), rhsinfo
2017-06-18 13:58 (unknown), membership
2017-06-18 14:27 (unknown), xa0ajutor
2017-06-19 9:36 (unknown), susan.christian
2017-06-19 16:53 (unknown), armouralumni
2017-06-19 18:46 (unknown), chrisbi_anelyst
2017-06-19 19:58 (unknown), tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
2017-06-20 0:47 (unknown), durrant
2017-06-20 6:29 (unknown), xa0ajutor
2017-06-20 16:31 (unknown), nfrankiyamu
2017-06-20 17:50 (unknown), editor
2017-06-20 18:45 (unknown), roeper
2017-06-20 22:49 (unknown), redaccion
2017-06-21 4:40 (unknown), kholloway
2017-06-21 6:16 (unknown), angers
2017-06-21 6:23 (unknown), chrisbi_anelyst
2017-06-21 7:32 (unknown), tjcrewvolcoordinator-Re5JQEeQqe8AvxtiuMwx3w
2017-06-21 7:43 (unknown), koopk
2017-06-22 2:13 (unknown), ecaterinasuciu09
2017-06-22 5:49 (unknown), noord-holland
2017-06-22 13:22 (unknown), jeffrey.faulkenberg
2017-06-22 20:22 (unknown), junplzen
2017-06-22 20:24 (unknown), koopk
2017-06-23 1:43 (unknown), horizon
2017-06-23 2:49 (unknown), mdavis
2017-06-23 4:50 (unknown), nkosuta-f+iqBESB6gc
2017-06-23 6:09 (unknown), Administrator
2017-06-23 12:26 (unknown), archerrp
2017-06-23 17:22 (unknown), richard
2017-06-23 19:27 (unknown), armouralumni
2017-06-24 0:04 (unknown), hastpass
2017-06-24 0:35 (unknown), citydesk
2017-06-24 2:32 (unknown), h.gerritsen12
2017-06-24 8:07 (unknown), j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
2017-06-24 11:55 (unknown), natasha.glauser
2017-06-24 12:38 (unknown), redaccion
2017-06-24 15:03 (unknown), archerrp
2017-06-24 15:41 (unknown), benjamin
2017-06-24 19:38 (unknown), richard
2017-06-25 2:39 (unknown), bflove1-ntQ8I44N4zM
2017-06-25 3:57 (unknown), nfrankiyamu
2017-06-25 4:47 (unknown), h.gerritsen12
2017-06-25 5:14 (unknown), archerrp
2017-06-25 5:19 (unknown), nbensoncole81
2017-06-25 10:21 (unknown), richard
2017-06-25 13:23 (unknown), rueggemann
2017-06-25 18:13 (unknown), citydesk
2017-06-25 20:10 (unknown), h.gerritsen12
2017-06-26 5:21 (unknown) Leon Romanovsky
2017-06-26 9:15 (unknown), beautyink
2017-06-26 10:22 (unknown), p.mueller-spz-hgw-Mmb7MZpHnFY
2017-06-26 15:03 (unknown), richard
2017-06-26 16:10 (unknown), susan.christian
2017-06-26 17:51 (unknown), rueggemann
2017-06-26 22:14 (unknown), citydesk
2017-06-26 22:58 (unknown), Anders Lind
2017-06-26 22:58 (unknown), Anders Lind
2017-06-27 0:08 (unknown), h.gerritsen12
2017-06-27 7:12 (unknown), loisc07
2017-06-27 7:15 (unknown), noord-holland
2017-06-27 11:59 (unknown), natasha.glauser
2017-06-28 3:22 (unknown), Administrator
2017-06-28 3:56 (unknown), системы администратор
2017-06-28 3:56 (unknown), системы администратор
2017-06-28 3:56 (unknown), системы администратор
2017-06-28 3:56 (unknown), системы администратор
2017-06-28 14:22 (unknown), tchidrenplytoo
2017-06-29 10:39 (unknown), lizdebeth_
2017-06-29 12:20 (unknown), The Post Office
2017-06-29 13:46 (unknown), kholloway
2017-06-30 1:14 (unknown), paloma.depping
2017-06-30 2:53 (unknown), 1.10.0812112155390.21775
2017-06-30 8:29 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-07-01 11:36 (unknown), p.mueller-spz-hgw-Mmb7MZpHnFY
2017-07-01 21:28 (unknown), redaccion
2017-07-02 10:14 (unknown), armouralumni
2017-07-02 18:44 (unknown), tchidrenplytoo
2017-07-02 20:26 (unknown), tabiadhawatef
2017-07-03 1:28 (unknown), h.piontek
2017-07-03 4:44 (unknown), beautyink
2017-07-03 12:43 (unknown), mitch_128
2017-07-03 13:30 (unknown), roeper
2017-07-03 13:54 (unknown), sm-yT/95SBIOhs
2017-07-03 14:13 (unknown), tammyehood
2017-07-04 4:17 (unknown), rueggemann
2017-07-04 6:01 (unknown), xa0ajutor
2017-07-04 8:52 (unknown), citydesk
2017-07-04 10:50 (unknown), h.gerritsen12
2017-07-04 18:35 (unknown), noord-holland
2017-07-04 19:53 (unknown), tchidrenplytoo
2017-07-04 22:53 (unknown), j.lahoda-aRb0bU7PRFPrBKCeMvbIDA
2017-07-05 0:06 (unknown), michele
2017-07-05 6:42 (unknown), angers
2017-07-05 6:55 (unknown), agiva
2017-07-05 7:00 (unknown), benjamin
2017-07-05 8:06 (unknown), koopk
2017-07-05 15:15 (unknown), armouralumni
2017-07-05 15:57 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-07-05 21:18 (unknown), een
2017-07-06 0:55 (unknown), 이성근
2017-07-06 6:10 (unknown), armouralumni
2017-07-06 14:11 (unknown), een
2017-07-06 17:35 (unknown), simon.a.t.hardy
2017-07-07 0:30 (unknown), amin
2017-07-07 1:37 (unknown), zumbalisa
2017-07-08 17:13 (unknown), horizon
2017-07-08 18:22 (unknown), Alfred chow
2017-07-09 13:02 (unknown), smallgroups
2017-07-09 20:52 (unknown), iker-KvP5wT2u2U0
2017-07-09 23:19 (unknown), Corporate Lenders
2017-07-09 23:19 (unknown), Corporate Lenders
2017-07-09 23:29 (unknown), brian
2017-07-10 3:45 (unknown), системы администратор
2017-07-10 3:45 (unknown), системы администратор
2017-07-10 3:45 (unknown), системы администратор
2017-07-10 3:45 (unknown), системы администратор
2017-07-10 10:06 (unknown), alters
2017-07-10 12:43 (unknown), brian
2017-07-10 12:51 (unknown), lucia.germino
2017-07-10 21:37 (unknown), roeper
2017-07-10 21:53 (unknown), agiva
2017-07-10 22:07 (unknown), jacqueline.pike
2017-07-11 16:39 (unknown), indulge-HCInDj6vYHrk4FeknX8I/ZqQE7yCjDx5
2017-07-12 11:22 (unknown), sterrenplan.kampen
2017-07-12 19:24 (unknown), patientcentral
2017-07-13 3:37 (unknown), befragung
2017-07-13 4:49 (unknown), delaware.orders
2017-07-15 12:30 (unknown), Huaisheng HS1 Ye
2017-07-16 7:25 (unknown), kim.frederiksen
2017-07-17 1:09 (unknown), kathleen.gilbert
2017-07-17 1:20 (unknown), tchidrenplytoo
2017-07-17 15:31 (unknown), kathleen.gilbert
2017-07-17 15:42 (unknown), tchidrenplytoo
2017-07-17 17:30 (unknown), richard
2017-07-17 21:54 (unknown), citydesk
2017-07-17 23:02 (unknown), h.piontek
2017-07-18 4:09 (unknown), armouralumni
2017-07-18 4:32 (unknown), citydesk
2017-07-18 4:50 (unknown), ying.huang-ral2JQCrhuEAvxtiuMwx3w
2017-07-18 5:45 (unknown), h.gerritsen12
2017-07-18 6:22 (unknown), sorbisches.internat
2017-07-18 11:36 (unknown), shwx002
2017-07-18 12:45 (unknown), mitch_128
2017-07-18 15:56 (unknown), bfoster
2017-07-18 20:17 (unknown), brian
2017-07-18 20:28 (unknown), lizdebeth_
2017-07-18 20:36 (unknown), bunny43200
2017-07-19 11:11 (unknown), rhsinfo
2017-07-20 3:55 (unknown), mfr-6k8blvha/+BqlCpFK1mnLg
2017-07-20 18:43 (unknown), tbinh.minhnd
2017-07-23 23:48 (unknown), miteshriya
2017-07-25 10:27 (unknown), nick_c_huang
2017-07-25 14:56 (unknown), nhossein4212003
2017-07-25 16:36 (unknown), susan.christian
2017-07-25 18:45 (unknown), x1kn8fk
2017-07-25 18:53 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-07-25 20:01 (unknown), hp
2017-07-25 20:41 (unknown), sorbisches.internat
2017-07-25 23:24 (unknown), h.gerritsen12
2017-07-26 2:25 (unknown), tammyehood
2017-07-26 4:42 (unknown), horizon
2017-07-26 6:36 (unknown), nenep
2017-07-26 10:32 (unknown), Solen win2
2017-07-26 11:39 (unknown), chrisbi_anelyst
2017-07-26 14:20 (unknown), sterrenplan.kampen
2017-07-26 20:08 (unknown), municlerk
2017-07-26 20:45 (unknown), een
2017-07-27 2:14 (unknown) ceph-devel
2017-07-27 2:16 (unknown) ceph-devel
2017-07-27 5:01 (unknown), hp
2017-07-27 13:00 (unknown), nfrankiyamu
2017-07-28 7:44 (unknown), robert.berry
2017-07-28 16:02 (unknown), gdahl
2017-07-30 23:33 (unknown), daven bango
2017-07-31 10:50 (unknown), susan.christian
2017-07-31 11:33 (unknown), rhsinfo
2017-07-31 11:49 (unknown), kchristopher
2017-07-31 13:15 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-07-31 14:52 (unknown), horizon
2017-07-31 16:54 (unknown), bunny43200
2017-07-31 18:00 (unknown), robert.berry
2017-07-31 20:14 (unknown), x1kn8fk
2017-07-31 21:27 (unknown), natasha.glauser
2017-08-01 1:35 (unknown), xa0ajutor
2017-08-01 1:35 (unknown), amin
2017-08-01 4:40 (unknown), durrant
2017-08-01 10:07 (unknown) Chris Ruehl
2017-08-01 12:35 (unknown), jha
2017-08-01 14:53 (unknown), Angela H. Whiteman
2017-08-01 16:33 (unknown), sterrenplan.kampen
2017-08-01 19:35 (unknown), anderslindgaard
2017-08-01 19:35 (unknown), anderslindgaard
2017-08-01 21:03 (unknown), editor
2017-08-01 21:19 (unknown), tammyehood
2017-08-02 0:36 (unknown), richard
2017-08-02 1:05 (unknown), lizdebeth_
2017-08-02 1:19 (unknown), nenep
2017-08-02 3:45 (unknown), системы администратор
2017-08-02 3:45 (unknown), системы администратор
2017-08-02 3:45 (unknown), системы администратор
2017-08-02 3:45 (unknown), системы администратор
2017-08-02 4:12 (unknown), Administrator
2017-08-02 11:47 (unknown), armiksanaye
2017-08-02 12:55 (unknown), tammyehood
2017-08-02 13:58 (unknown), Will
2017-08-02 15:40 (unknown), Erma
2017-08-02 17:07 (unknown), Margery
2017-08-02 17:31 (unknown), Edmond
2017-08-02 18:05 (unknown), Angela-63XfWfWBA5k
2017-08-03 5:21 (unknown), Houston
2017-08-03 14:01 (unknown), Nora Johnson
2017-08-03 19:52 (unknown), natasha.glauser
2017-08-04 5:04 (unknown), durrant
2017-08-04 23:59 (unknown), editor
2017-08-05 11:42 (unknown), Sriram Murthy
2017-08-05 14:08 (unknown), simon.a.t.hardy
2017-08-06 23:55 (unknown), webmaster
2017-08-07 4:49 (unknown), sorbisches.internat
2017-08-07 7:38 (unknown), simon.a.t.hardy
2017-08-07 11:50 (unknown), 1.10.0812112155390.21775
2017-08-07 18:38 (unknown), mitch_128
2017-08-07 18:42 (unknown), susan.christian
2017-08-07 19:03 (unknown), sm-yT/95SBIOhs
2017-08-07 20:25 (unknown), editor
2017-08-07 21:05 (unknown), sibolt.mulder-b60u5d1xRcFWk0Htik3J/w
2017-08-07 23:50 (unknown), wvhyvcm.abyxg
2017-08-08 4:57 (unknown), wesley.sydnor
2017-08-08 5:57 (unknown), befragung
2017-08-08 14:49 (unknown) catherine.verge
2017-08-08 17:09 (unknown), tchidrenplytoo
2017-08-08 19:14 (unknown), eaya
2017-08-08 19:40 (unknown), citydesk
2017-08-08 20:55 (unknown), h.gerritsen12
2017-08-08 21:31 (unknown), michele
2017-08-09 0:04 (unknown), h.piontek
2017-08-09 0:41 (unknown), natasha.glauser
2017-08-09 10:20 (unknown), системы администратор
2017-08-09 10:20 (unknown), системы администратор
2017-08-09 10:20 (unknown), системы администратор
2017-08-09 10:20 (unknown), системы администратор
2017-08-09 14:34 (unknown), shwx002
2017-08-09 19:36 (unknown), tammyehood
2017-08-09 19:40 (unknown), tchidrenplytoo
2017-08-09 20:25 (unknown), sterrenplan.kampen
2017-08-09 21:55 (unknown), horizon
2017-08-09 23:06 (unknown), editor
2017-08-09 23:15 (unknown), wvhyvcm.abyxg
2017-08-09 23:53 (unknown), nenep
2017-08-10 0:03 (unknown), michele
2017-08-10 3:32 (unknown), kholloway
2017-08-10 9:38 (unknown), asn-request-tfHHCSmtYoI
2017-08-10 18:16 (unknown), simon.a.t.hardy
2017-08-10 21:08 (unknown), mitch_128
2017-08-10 21:36 (unknown), shriyashah
2017-08-11 4:42 (unknown), lizdebeth_
2017-08-11 4:57 (unknown), nenep
2017-08-11 4:59 (unknown), Administrator
2017-08-11 6:14 (unknown), администратор
2017-08-11 6:14 (unknown), администратор
2017-08-11 6:14 (unknown), администратор
2017-08-11 6:14 (unknown), администратор
2017-08-11 9:18 (unknown), jonathan.malihan
2017-08-11 15:50 (unknown), 1.10.0812112155390.21775
2017-08-11 17:28 (unknown), rhsinfo
2017-08-11 20:11 (unknown), tammyehood
2017-08-11 22:09 (unknown), Chris
2017-08-12 1:11 (unknown), lizdebeth_
2017-08-12 1:27 (unknown), nenep
2017-08-13 15:17 (unknown), bunny43200
2017-08-14 14:57 (unknown), linwoodrvsales
2017-08-14 16:53 (unknown), durrant
2017-08-14 17:38 (unknown), amin
2017-08-14 19:30 (unknown), sterrenplan.kampen
2017-08-15 1:55 (unknown), richard
2017-08-15 2:57 (unknown), nfrankiyamu
2017-08-15 3:38 (unknown), rueggemann
2017-08-15 4:40 (unknown), mitch_128
2017-08-15 6:08 (unknown), eumann
2017-08-15 6:50 (unknown), demorton
2017-08-15 11:16 (unknown), wvhyvcm.abyxg
2017-08-15 14:45 (unknown), een
2017-08-15 17:30 (unknown), simon.a.t.hardy
2017-08-15 17:31 (unknown), nnarroyo623
2017-08-16 2:03 (unknown), xa0ajutor
2017-08-16 5:46 (unknown), kim.frederiksen
2017-08-17 21:36 (unknown), Adam Richter
2017-08-18 17:42 (unknown) Rajneesh Bhardwaj
2017-08-20 2:58 (unknown), Solen win2
2017-08-22 13:31 (unknown), vinnakota chaitanya
2017-08-23 7:23 (unknown), Xuehan Xu
2017-08-25 0:32 (unknown), agiva
2017-08-26 5:43 (unknown), carol.dallstream-WaM/PvcBqAo
2017-08-26 14:48 (unknown), nfrankiyamu
2017-08-28 6:48 (unknown), patientcentral
2017-08-28 13:22 (unknown), dengx
2017-08-28 17:29 (unknown), befragung
2017-08-29 3:02 (unknown) catherine.verge
2017-08-30 0:38 (unknown), ifalqi
2017-08-30 1:37 (unknown), municlerk
2017-08-30 18:32 [PATCH] default implementation for of_find_all_nodes(...) Artur Lorincz
[not found] ` <1504117946-3958-1-git-send-email-larturus2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-09-24 15:50 ` (unknown), Artur Lorincz
2017-10-06 19:31 ` (unknown), Artur Lorincz
2017-10-08 16:28 ` (unknown), Artur Lorincz
2017-08-30 19:49 (unknown), susan.christian
2017-08-31 0:58 (unknown), info
2017-08-31 1:39 (unknown) m.wierczynska
2017-08-31 4:52 (unknown), archerrp
2017-08-31 8:20 (unknown), jessica.jones-PnMVE5gNl/Vkbu+0n/iG1Q
2017-08-31 9:54 (unknown), info
2017-08-31 12:23 (unknown), mark.robinson
2017-08-31 15:40 (unknown), sterrenplan.kampen
2017-09-01 2:30 (unknown), robert.berry
2017-09-01 4:05 (unknown), andrewf
2017-09-01 6:21 (unknown), zita.latex
2017-09-01 8:16 (unknown), financialaid
2017-09-01 11:40 (unknown), witt.kohl
2017-09-01 15:00 (unknown), ujagu8185-Re5JQEeQqe8AvxtiuMwx3w
2017-09-01 19:52 (unknown), sunaina
2017-09-01 20:58 (unknown), wvhyvcm.abyxg
2017-09-01 21:32 (unknown), nenep
2017-09-01 21:57 (unknown), umpvav-YDxpq3io04c
2017-09-01 22:51 (unknown), zumbalisa
2017-09-01 22:55 (unknown), redaccion
2017-09-02 0:58 (unknown), smallgroups
2017-09-02 1:59 (unknown), danielle.picarda2
2017-09-02 2:35 (unknown), jbmplupus-Mmb7MZpHnFY
2017-09-02 2:39 (unknown), een
2017-09-02 2:47 (unknown), nbensoncole81
2017-09-02 6:40 (unknown), simon.a.t.hardy
2017-09-03 21:26 (unknown), cl_luzcc
2017-09-03 21:51 (unknown), xb028930336
2017-09-03 22:54 (unknown), sherrilyn
2017-09-04 2:13 (unknown), x1kn8fk
2017-09-04 5:14 (unknown), nelcastellodicarta
2017-09-04 12:17 (unknown), noord-holland
2017-09-04 23:46 (unknown), sterrenplan.kampen
2017-09-05 1:51 (unknown), halinajan-4Uo9UdwAbX8
2017-09-05 2:43 (unknown), xb028930336
2017-09-05 11:11 (unknown), inn
2017-09-05 12:51 (unknown), ifalqi
2017-09-05 14:02 (unknown), ecaterinasuciu09
2017-09-05 16:31 (unknown), mgriffit
2017-09-05 18:07 (unknown), bfoster
2017-09-05 18:38 (unknown), john.dahlberg
2017-09-05 23:34 (unknown), kkaplanidou
2017-09-07 4:02 (unknown), dengx
2017-09-07 7:05 (unknown), tabiadhawatef
2017-09-10 6:22 (unknown), Youichi Kanno
2017-09-11 19:35 (unknown) Helge Deller
2017-09-11 20:10 (unknown), roeper
2017-09-12 19:16 (unknown), cl_luzcc
2017-09-12 19:45 (unknown), edo.hlaca
2017-09-13 4:21 (unknown), natasha.glauser
2017-09-15 17:29 (unknown), noreply
2017-09-15 17:30 (unknown), noreply
2017-09-20 1:01 (unknown), ninfo
2017-09-21 7:47 (unknown), MAILER-DAEMON
2017-09-22 1:55 (unknown), dengx
2017-09-22 3:39 (unknown), service
2017-09-22 8:41 (unknown), Adrian Gillian Bayford
2017-09-22 19:34 (unknown), John Michael
2017-09-27 17:41 (unknown), Michael Lyle
2017-09-27 19:12 (unknown), rlm85310
2017-09-27 19:30 (unknown), nbensoncole81
2017-09-28 0:21 (unknown), natasha.glauser
2017-09-28 15:08 (unknown), amin
2017-09-28 22:59 (unknown), rlm85310
2017-09-29 3:06 (unknown), jha
2017-09-29 7:44 (unknown), amin
2017-09-29 11:28 (unknown), cl_luzcc
2017-09-29 11:49 (unknown), roeper
2017-09-29 14:47 (unknown), nelcastellodicarta
2017-09-29 15:21 (unknown), natasha.glauser
2017-09-29 15:42 (unknown), noord-holland
2017-09-29 18:01 (unknown), clasico082
2017-09-29 21:29 (unknown), info
2017-09-30 14:07 (unknown), redaccion
2017-10-02 15:35 (unknown), nfrankiyamu
2017-10-02 17:38 (unknown), nbensoncole81
2017-10-02 18:00 (unknown), Solen win2
2017-10-02 18:06 (unknown), dengx
2017-10-02 20:31 (unknown), kchristopher
2017-10-03 0:03 (unknown), noord-holland
2017-10-03 0:14 (unknown), roeper
2017-10-03 0:55 (unknown), jbmplupus-Mmb7MZpHnFY
2017-10-03 7:38 (unknown), angers
2017-10-03 8:40 (unknown), koopk
2017-10-03 10:37 (unknown), edo.hlaca
2017-10-03 13:59 (unknown), nelcastellodicarta
2017-10-04 11:44 (unknown), susan.christian
2017-10-04 15:33 (unknown), membership
2017-10-04 16:11 (unknown), 1.10.0812112155390.21775
2017-10-05 7:10 (unknown), mgriffit
2017-10-05 10:20 (unknown), jeffrey.faulkenberg
2017-10-06 1:43 (unknown), sophie.norman
2017-10-06 1:59 (unknown), edo.hlaca
2017-10-06 2:19 (unknown), sherrilyn
2017-10-06 5:16 (unknown), nelcastellodicarta
2017-10-06 8:31 (unknown), smallgroups
2017-10-06 11:55 (unknown), info
2017-10-07 0:31 (unknown), carmen.croonquist
2017-10-08 1:26 (unknown), redaccion
2017-10-08 7:32 (unknown), cl_luzcc
2017-10-08 7:59 (unknown), edo.hlaca
2017-10-08 9:00 (unknown), pekka.enne
2017-10-08 11:08 (unknown), nelcastellodicarta
2017-10-08 14:15 (unknown), clasico082
2017-10-08 19:00 (unknown), matthias.foerster
2017-10-08 22:32 (unknown), natasha.glauser
2017-10-08 23:01 (unknown), susan.christian
2017-10-09 3:44 (unknown), roeper
2017-10-09 6:17 (unknown), durrant
2017-10-09 7:37 (unknown), Michael Lyle
2017-10-09 13:19 (unknown), carmen.croonquist
2017-10-09 15:06 (unknown), jha
2017-10-10 23:27 (unknown), editor
2017-10-11 7:34 (unknown), cl_luzcc
2017-10-11 8:20 (unknown), sherrilyn
2017-10-11 9:19 (unknown), pekka.enne
2017-10-11 11:49 (unknown), nelcastellodicarta
2017-10-11 19:29 (unknown), info
2017-10-11 22:32 (unknown), fwkz4811-DoVvmRvd3PAA2dtGD8cC2w
2017-10-12 3:08 (unknown), iker-KvP5wT2u2U0
2017-10-12 5:55 (unknown), xa0et.sirio
2017-10-12 8:17 (unknown), armouralumni
2017-10-12 11:46 (unknown), sophie.norman
2017-10-12 13:15 (unknown), mbalhoff
2017-10-12 13:53 (unknown), Andrew Clement
2017-10-12 14:09 (unknown), redaccion
2017-10-13 6:16 (unknown), nfrankiyamu
2017-10-13 17:15 (unknown), susan.christian
2017-10-14 6:44 (unknown), Ella Golan
2017-10-15 3:28 (unknown), redaccion
2017-10-15 11:15 (unknown), cl_luzcc
2017-10-15 11:49 (unknown), edo.hlaca
2017-10-15 12:04 (unknown), sherrilyn
2017-10-15 12:17 (unknown), Solen win2
2017-10-15 13:01 (unknown), pekka.enne
2017-10-15 15:13 (unknown), nelcastellodicarta
2017-10-15 18:29 (unknown), clasico082
2017-10-15 22:07 (unknown), info
2017-10-16 1:23 (unknown), fwkz4811-DoVvmRvd3PAA2dtGD8cC2w
2017-10-16 19:44 (unknown), iker-KvP5wT2u2U0
2017-10-17 0:33 (unknown), membership
2017-10-17 7:00 (unknown), lswedroe
2017-10-17 12:14 (unknown), dengx
2017-10-19 22:54 (unknown), armouralumni
2017-10-20 3:19 (unknown), dengx
2017-10-20 8:42 (unknown), membership
2017-10-23 13:52 (unknown), Intl Agency
2017-10-25 12:10 (unknown), EG
2017-10-29 9:46 (unknown), Solen win
2017-11-01 23:35 (unknown), Roy Cockrum Foundation
2017-11-05 3:40 (unknown), Solen win
2017-11-06 19:51 (unknown), Qing Chang
2017-11-12 15:09 (unknown), Friedrich Mayrhofer
2017-11-12 15:09 (unknown), Friedrich Mayrhofer
2017-11-12 15:10 (unknown), Mitesh Shah
2017-11-13 3:13 (unknown), Bounced mail
2017-11-15 9:18 (unknown) nanda_kishore_chinna
2017-11-15 14:44 (unknown), Qing Chang
2017-11-16 10:18 (unknown), Michal Hocko
2017-11-19 20:07 (unknown), Mitesh Shah
2017-11-20 2:36 (unknown), Robert Wang
2017-12-01 2:56 (unknown), Post Office
2017-12-01 14:22 (unknown), Rein Appeldoorn
2017-12-12 16:06 (unknown), Solen win
2017-12-14 16:26 (unknown), Solen win
2017-12-17 17:28 (unknown), Solen win
2017-12-23 15:32 (unknown), 柯弼舜
2017-12-24 2:58 (unknown), 柯弼舜
2017-12-24 9:07 (unknown), Solen win
2017-12-30 2:10 (unknown), Arpit Patel
2017-12-30 4:37 (unknown), Adam Richter
2018-01-10 10:27 (unknown), TimGuo
2018-01-11 3:22 (unknown), Active lender@
2018-01-16 2:16 (unknown) Jack.Ma
2018-01-16 2:23 (unknown) Jack.Ma
2018-01-23 13:36 (unknown), Mr Sheng Li Hung
2018-01-23 13:54 (unknown), Mr Sheng Li Hung
2018-01-25 7:23 (unknown), tirumalareddy marri
2018-01-27 13:25 (unknown), Jones
2018-01-27 13:48 (unknown), Jones
2018-01-28 17:01 (unknown), whoisthis TG
2018-01-28 17:06 (unknown), whoisthis TG
2018-01-29 14:17 (unknown), Jones
2018-01-29 16:30 (unknown), Jones
2018-01-29 16:55 (unknown), Jones
2018-01-29 17:17 (unknown), Jones
2018-01-29 17:17 (unknown), Jones
2018-01-29 17:17 (unknown), Jones
2018-01-29 17:17 (unknown), Jones
2018-01-29 17:17 (unknown), Jones
2018-01-29 17:17 (unknown), Jones
2018-02-02 12:15 (unknown), Robert Vasek
[not found] <CALfDnQ8aCTywvhqOBkFv3qQOoME9wvTrKbQq8i8PCPOx2iBp=A@mail.gmail.com>
[not found] ` <CALfDnQ-NihbhS=8C+ZfiKepj5x+Zd5uS2zH82-VrwV40A55s0w@mail.gmail.com>
2018-02-07 10:50 ` (unknown), Solen win
2018-02-08 14:40 (unknown), Automatic Email Delivery Software
2018-02-11 16:07 (unknown), glolariu
2018-02-12 1:39 (unknown), Alfred Cheuk Chow
2018-02-12 1:39 (unknown), Alfred Cheuk Chow
2018-02-12 1:39 (unknown), Alfred Cheuk Chow
2018-02-12 1:39 (unknown), Alfred Cheuk Chow
2018-02-13 11:58 (unknown), Solen win
2018-02-13 22:57 (unknown), Alfred Cheuk Chow
2018-02-13 22:57 (unknown), Alfred Cheuk Chow
2018-02-13 22:57 (unknown), Alfred Cheuk Chow
2018-02-13 22:57 (unknown), Alfred Cheuk Chow
2018-02-13 22:59 (unknown), Mitesh Shah
2018-02-17 1:45 (unknown), Ryan Ellis
2018-02-17 8:41 (unknown), Solen win
2018-02-17 15:29 (unknown), Ahmed Soliman
2018-02-23 15:54 (unknown), Adam Richter
[not found] <[PATCH xf86-video-amdgpu 0/3] Add non-desktop and leasing support>
2018-03-03 4:49 ` (unknown), Keith Packard
2018-03-05 17:06 (unknown) Meghana Madhyastha
2018-03-07 7:48 (unknown), Solen win
2018-03-23 3:05 (unknown), Mail Delivery Subsystem
2018-04-16 1:22 (unknown), Andrew Worsley
2018-04-20 8:02 (unknown), Christoph Hellwig
2018-04-20 8:02 ` (unknown) Christoph Hellwig
2018-05-25 3:26 (unknown), Bounced mail
2018-05-31 17:11 (unknown), Adam Richter via Containers
2018-06-23 21:08 (unknown), David Lechner
2018-07-05 10:36 (unknown), rosdi ablatiff
2018-07-06 1:26 (unknown), Dave Airlie
2018-08-24 4:59 (unknown), Dave Airlie
2018-08-27 14:50 (unknown), Christoph Hellwig
2018-10-21 16:25 (unknown), Michael Tirado
2019-01-02 12:25 (unknown), Frank Wunderlich
2019-01-15 2:55 (unknown), Jens Axboe
2019-02-28 3:36 (unknown) Post Office
2019-03-01 3:34 (unknown) Automatic Email Delivery Software
2019-03-04 3:42 (unknown) Automatic Email Delivery Software
2019-03-19 14:41 (unknown) Maxim Levitsky
2019-03-21 1:51 (unknown) zhuchangchun
2019-03-29 0:36 (unknown) 邀请函
2019-04-04 5:56 (unknown) Mail Delivery Subsystem
2019-04-05 2:38 (unknown) Changbin Du
2019-04-10 11:14 Norbert Lange
2019-04-10 13:37 ` (unknown) Jan Kiszka
2019-04-10 14:36 ` (unknown) Jan Kiszka
[not found] ` <VI1PR05MB5917B5956F2E9365F10D6539F62E0@VI1PR05MB5917.eurprd05.prod.outlook.com>
2019-04-10 14:47 ` (unknown) Jan Kiszka
2019-04-10 15:02 ` (unknown) Lange Norbert
2019-04-10 16:46 ` (unknown) Jan Kiszka
2019-04-10 11:17 Norbert Lange
2019-04-10 14:15 ` (unknown) Jan Kiszka
2019-05-16 3:48 (unknown) Mail Delivery Subsystem
2019-05-26 11:51 (unknown) Thomas Meyer
2019-06-07 0:54 (unknown) Dave Airlie
2019-08-23 2:12 (unknown) Rob Herring
2019-09-12 8:09 (unknown) Gene Chen
2019-12-12 15:50 (unknown) 周琰杰 (Zhou Yanjie)
[not found] <1187667350.235001.1580574902701.ref@mail.yahoo.com>
2020-02-01 16:35 ` (unknown) Mrs. Maureen Hinckley
2020-02-05 8:23 (unknown) Frau Huan Jlaying
2020-02-11 22:34 (unknown) Rajat Jain
2020-02-15 3:25 (unknown) mprim37 alcorta
2020-02-24 8:18 kernel panic: audit: backlog limit exceeded syzbot
2020-02-24 22:38 ` Paul Moore
2020-02-24 22:43 ` Eric Paris
2020-02-24 22:46 ` Paul Moore
[not found] ` <CAHC9VhQnbdJprbdTa_XcgUJaiwhzbnGMWJqHczU54UMk0AFCtw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-02-27 15:39 ` (unknown) Dmitry Vyukov via B.A.T.M.A.N
2020-03-04 9:42 (unknown) Julie Leach
2020-03-04 23:30 (unknown) Maria Alessandra Filippi
2020-03-05 0:26 (unknown) Maria Alessandra Filippi
2020-03-05 2:33 (unknown) Maria Alessandra Filippi
2020-03-05 10:46 (unknown) Juanito S. Galang
2020-03-05 10:46 (unknown) Juanito S. Galang
2020-03-05 10:46 (unknown) Juanito S. Galang
2020-03-05 10:46 (unknown) Juanito S. Galang
2020-03-05 10:46 (unknown) Juanito S. Galang
2020-03-05 10:46 (unknown) Juanito S. Galang
2020-03-05 10:47 (unknown) Juanito S. Galang
2020-03-09 7:34 (unknown) Michael J. Weirsky
2020-03-09 7:34 (unknown) Michael J. Weirsky
2020-03-09 7:34 (unknown) Michael J. Weirsky
2020-03-09 7:34 (unknown) Michael J. Weirsky
2020-03-09 7:37 (unknown) Michael J. Weirsky
2020-03-09 8:43 (unknown) Michael J. Weirsky
2020-03-17 0:11 (unknown) David Ibe
2020-03-17 0:11 (unknown) David Ibe
2020-03-27 8:36 (unknown) chenanqing
2020-03-27 9:20 (unknown) chenanqing
2020-04-23 23:06 (unknown) Azim Hashim Premji
2020-04-23 23:06 (unknown) Azim Hashim Premji
2020-05-08 22:58 (unknown) Barbara D Wilkins
2020-05-08 23:41 (unknown) Barbara D Wilkins
2020-05-08 23:51 (unknown) Barbara D Wilkins
2020-06-04 19:57 (unknown) David Shine
[not found] <1327230475.528260.1591750200327.ref@mail.yahoo.com>
2020-06-10 0:50 ` (unknown) Celine Marchand
2020-06-27 21:52 (unknown) helen
2020-06-27 21:54 (unknown) helen
2020-06-27 21:58 (unknown) lookman joe
2020-06-27 21:58 (unknown) lookman joe
2020-06-27 21:58 (unknown) lookman joe
2020-06-30 17:56 (unknown) Vasiliy Kupriakov
2020-07-02 19:43 (unknown) Barr Anthony Calder
2020-07-22 4:45 (unknown) Darlehen Bedienung
2020-07-22 5:32 (unknown) Darlehen Bedienung
2020-07-22 5:32 (unknown) Darlehen Bedienung
2020-07-22 5:32 (unknown) Darlehen Bedienung
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.