All of lore.kernel.org
 help / color / mirror / Atom feed
* CPU lockup during halt for Shuttle SB61G2 p4 with hyperthreading 2.4.24
@ 2004-01-29 18:11 tomepperly
  2004-01-30  6:13 ` CPU lockup during halt for Shuttle SB61G2 p4 with hyperthreading 2.4.24 (untained kernel) Tom Epperly
  0 siblings, 1 reply; 2+ messages in thread
From: tomepperly @ 2004-01-29 18:11 UTC (permalink / raw)
  To: linux-kernel

[1.] CPU lockup during halt for Shuttle SB61G2 p4 with hyperthreading

[2.] Full description
I've got a Shuttle SB61G2 purchased 12/31/03 with a 2.6GHz P4 with
hyperthreading. Sometimes when shutting down, I get the "Power down."
message, but it doesn't actually power down the system. It just sits
there indefinitely. I tried enabling nmi_watchdog=1, and I
intermittently get kernel oopses. I only started having problems when I
compiled the kernel with SMP enabled. A non-SMP kernel never locks up.

I transcribed the oops message from my screen and ran ksymoops on it. I
am running a vanilla 2.4.24 downloaded from kernel.org compiled with
gcc-2.95.

Please Cc me on replies as I am not subscribed to linux-kernel.

[3.] Keywords: Lockup SMP
[4.] Linux version 2.4.24-vanilla (root@faerun) (gcc version 2.95.4
20011002 (Debian prerelease)) #3 SMP Fri Jan 16 07:30:34 PST 2004
[5.] 
I had to write this on paper and then type it in by hand. I was very
careful, but transcription errors are always a possibility:
ksymoops 2.4.9 on i686 2.4.24-vanilla.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.4.24-vanilla/ (default)
     -m /boot/System.map-2.4.24-vanilla (default)

Warning: You did not tell me where to find symbol information.  I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc.  ksymoops -h explains the options.

Error (regular_file): read_system_map stat
/boot/System.map-2.4.24-vanilla failed
ksymoops: No such file or directory
Warning (compare_maps): mismatch on symbol _nv000173rm  , nvidia says
f8e4bb20, /lib/modules/2.4.24-vanilla/kernel/drivers/video/nvidia.o says
f8e4b900.  Ignoring
/lib/modules/2.4.24-vanilla/kernel/drivers/video/nvidia.o entry
NMI Watchdog detected LOCKUP on CPU1, eip c01a6757, registers:
EIP: 0010: [<c01a6757>] Tainted: P
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00000046
eax: 00000011 ebx: f7cc9e48 ecx: f7cc9e48 edx: 00000400
esi: 00000010 edi: 00000000 ebp: bffffbc8 esp: f7cc9e08
ds: 0018 es: 0018 ss: 0018
Process halt (pid: 1220, stackpage=f7cc9000)
Stack: 00000018 c01b29cb 00000400 f7cc9e48 00000010 00002001 c02e5e18
00000011
       c02e5e18 c01b26d7 00000010 f7cc9e48 c1c32114 00002001 00000000
00000000
       00000000 c01b24b9 00000000 00000001 f7cc9e68 00002001 c02e5e40
c02e5e40
Call Trace: [<c01b29cb>] [<c01b26d7>] [<c01b24b9>] [<c01b2d5e>]
[<c01c1394>]
 [<c0105523>] [<c012487d>] [<c0122d8a>] [<c0122e11>] [<c01231067>]
[<c01239a5>]
 [<c0141864>] [<c014954d>] [<c0106f27>]
Code: 66 89 01 eb 11 eb 11 8d 74 26 00 ed 89 01 eb 08 0f 0b 4f 01 ec ff


>>EIP; c01a6757 <acpi_os_stall_R__ver_acpi_os_stall+67/17c>   <=====

>>ebx; f7cc9e48 <_end+3794bfe4/385cf1fc>
>>ecx; f7cc9e48 <_end+3794bfe4/385cf1fc>
>>esp; f7cc9e08 <_end+3794bfa4/385cf1fc>

Trace; c01b29cb <acpi_set_register_R__ver_acpi_set_register+4db/6cc>
Trace; c01b26d7 <acpi_set_register_R__ver_acpi_set_register+1e7/6cc>
Trace; c01b24b9 <acpi_get_register_R__ver_acpi_get_register+51/88>
Trace; c01b2d5e
<acpi_enter_sleep_state_R__ver_acpi_enter_sleep_state+1a2/1bc>
Trace; c01c1394
<acpi_pci_irq_enable_R__ver_acpi_pci_irq_enable+bb4/2868>
Trace; c0105523 <machine_power_off+b/314>
Trace; c012487d <unregister_reboot_notifier+365/11a4>
Trace; c0122d8a <dequeue_signal+432/438>
Trace; c0122e11 <send_sig_info+81/98>
Trace; c01231067 <END_OF_CODE+b083c2710/????>
Trace; c01239a5 <notify_parent+685/edc>
Trace; c0141864 <blkdev_put+148/154>
Trace; c014954d <kill_fasync+4f5/528>
Trace; c0106f27 <__read_lock_failed+115f/1520>

Code;  c01a6757 <acpi_os_stall_R__ver_acpi_os_stall+67/17c>
00000000 <_EIP>:
Code;  c01a6757 <acpi_os_stall_R__ver_acpi_os_stall+67/17c>   <=====
   0:   66 89 01                  mov    %ax,(%ecx)   <=====
Code;  c01a675a <acpi_os_stall_R__ver_acpi_os_stall+6a/17c>
   3:   eb 11                     jmp    16 <_EIP+0x16>
Code;  c01a675c <acpi_os_stall_R__ver_acpi_os_stall+6c/17c>
   5:   eb 11                     jmp    18 <_EIP+0x18>
Code;  c01a675e <acpi_os_stall_R__ver_acpi_os_stall+6e/17c>
   7:   8d 74 26 00               lea    0x0(%esi,1),%esi
Code;  c01a6762 <acpi_os_stall_R__ver_acpi_os_stall+72/17c>
   b:   ed                        in     (%dx),%eax
Code;  c01a6763 <acpi_os_stall_R__ver_acpi_os_stall+73/17c>
   c:   89 01                     mov    %eax,(%ecx)
Code;  c01a6765 <acpi_os_stall_R__ver_acpi_os_stall+75/17c>
   e:   eb 08                     jmp    18 <_EIP+0x18>
Code;  c01a6767 <acpi_os_stall_R__ver_acpi_os_stall+77/17c>
  10:   0f 0b                     ud2a   
Code;  c01a6769 <acpi_os_stall_R__ver_acpi_os_stall+79/17c>
  12:   4f                        dec    %edi
Code;  c01a676a <acpi_os_stall_R__ver_acpi_os_stall+7a/17c>
  13:   01 ec                     add    %ebp,%esp
Code;  c01a676c <acpi_os_stall_R__ver_acpi_os_stall+7c/17c>
  15:   ff 00                     incl   (%eax)


2 warnings and 1 error issued.  Results may not be reliable.

[6.]
I booted my machine. gdm (X11) fires up using nVidia drivers. Choose
shutdown from gdm menu. Oops. It happens every once in a while when I
shutdown.
[7.]
[7.1]
faerun:/usr/src/linux-2.4.24# sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
  
Linux faerun 2.4.24-vanilla #3 SMP Fri Jan 16 07:30:34 PST 2004 i686
GNU/Linux
  
Gnu C                  3.3.3
Gnu make               3.80
util-linux             2.12
mount                  2.12
modutils               2.4.26
e2fsprogs              1.35-WIP
PPP                    2.4.2
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.15
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               5.0.91
Modules Loaded         nvidia joydev mousedev hid input binfmt_misc uhci
ide-scsi scsi_mod it87 i2c-proc i2c-isa i2c-core v_midi sound i810_audio
ehci-hcd

I used "make CC=gcc-2.95 HOSTCC=gcc-2.95" when compiling the kernel and
its modules.

faerun:/usr/src/linux-2.4.24#
[7.2.]
faerun:/usr/src/linux-2.4.24# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping        : 9
cpu MHz         : 2605.987
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5203.55
 
processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.60GHz
stepping        : 9
cpu MHz         : 2605.987
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5203.55

Intel 865G chipset
faerun:/usr/src/linux-2.4.24#
[7.3.]
faerun:/usr/src/linux-2.4.24# cat /proc/modules
nvidia               1969376  14 (autoclean)
joydev                  7104   0 (unused)
mousedev                3864   1
hid                    13864   0 (unused)
input                   3456   0 [joydev mousedev hid]
binfmt_misc             5896   1
uhci                   24752   0 (unused)
ide-scsi                8976   0
scsi_mod               87496   1 [ide-scsi]
it87                    9768   0 (unused)
i2c-proc                5972   0 [it87]
i2c-isa                  788   0 (unused)
i2c-core               14788   0 [it87 i2c-proc i2c-isa]
v_midi                  4996   0 (unused)
sound                  56428   0 [v_midi]
i810_audio             24312   1
ehci-hcd               15880   0 (unused)
faerun:/usr/src/linux-2.4.24#
[7.4.]
faerun:/usr/src/linux-2.4.24# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : it87
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0500-051f : Intel Corp. 82801EB SMBus Controller
0cf8-0cff : PCI conf1
9000-90ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
  9000-90ff : 8139too
9400-947f : VIA Technologies, Inc. IEEE 1394 Host Controller
a000-a01f : Intel Corp. 82801EB USB
  a000-a01f : usb-uhci
a400-a41f : Intel Corp. 82801EB USB
  a400-a41f : usb-uhci
a800-a81f : Intel Corp. 82801EB USB
  a800-a81f : usb-uhci
ac00-ac1f : Intel Corp. 82801EB USB
  ac00-ac1f : usb-uhci
b400-b4ff : Intel Corp. 82801EB AC'97 Audio Controller
  b400-b4ff : Intel ICH5
b800-b83f : Intel Corp. 82801EB AC'97 Audio Controller
  b800-b83f : Intel ICH5
f000-f00f : Intel Corp. 82801EB Ultra ATA Storage Controller
  f000-f007 : ide0
  f008-f00f : ide1
faerun:/usr/src/linux-2.4.24# cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
  00100000-00281001 : Kernel code
  00281002-0031e83f : Kernel data
3fff0000-3fff2fff : ACPI Non-volatile Storage
3fff3000-3fffffff : ACPI Tables
40000000-400003ff : Intel Corp. 82801EB Ultra ATA Storage Controller
e8000000-efffffff : PCI Bus #01
  e8000000-efffffff : PCI device 10de:0322 (nVidia Corporation)
f0000000-f3ffffff : Intel Corp. 82865G/PE/P Processor to I/O Controller
f4000000-f5ffffff : PCI Bus #01
  f4000000-f4ffffff : PCI device 10de:0322 (nVidia Corporation)
f7000000-f70000ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+
  f7000000-f70000ff : 8139too
f7001000-f70017ff : VIA Technologies, Inc. IEEE 1394 Host Controller
f8000000-f80003ff : Intel Corp. 82801EB USB2
  f8000000-f80003ff : ehci_hcd
f8001000-f80011ff : Intel Corp. 82801EB AC'97 Audio Controller
  f8001000-f80011ff : ich_audio MMBAR
f8002000-f80020ff : Intel Corp. 82801EB AC'97 Audio Controller
  f8002000-f80020ff : ich_audio MBBAR
fec00000-ffffffff : reserved
faerun:/usr/src/linux-2.4.24#
[7.5.]
faerun:/usr/src/linux-2.4.24# lspci -vvv
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller
(rev 02)
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [e4] #09 [0106]
        Capabilities: [a0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW-
Rate=x8 
00:01.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller
(rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000f000-00000fff
        Memory behind bridge: f4000000-f5ffffff
        Prefetchable memory behind bridge: e8000000-efffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
 
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00
[UHCI])
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at ac00 [size=32]
 
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00
[UHCI])
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at a000 [size=32]
 
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00
[UHCI])
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at a400 [size=32]
 
00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02) (prog-if 00
[UHCI])
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at a800 [size=32]
 
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02) (prog-if 20
[EHCI])
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 23
        Region 0: Memory at f8000000 (32-bit, non-prefetchable)
[size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: f6000000-f7ffffff
        Prefetchable memory behind bridge: fff00000-000fffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev
02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
 
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller
(rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at f000 [size=16]
        Region 5: Memory at 40000000 (32-bit, non-prefetchable)
[size=1K]
 
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device fb61
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 0500 [size=32]
 
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio
Controller (rev 02)
        Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown
device c09d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at b400 [size=256]
        Region 1: I/O ports at b800 [size=64]
        Region 2: Memory at f8001000 (32-bit, non-prefetchable)
[size=512]
        Region 3: Memory at f8002000 (32-bit, non-prefetchable)
[size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX
5200] (rev a1) (prog-if 00 [VGA])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f4000000 (32-bit, non-prefetchable)
[size=16M]
        Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit-
FW- Rate=x8
 
02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 9000 [size=256]
        Region 1: Memory at f7000000 (32-bit, non-prefetchable)
[size=256]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 
02:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80) (prog-if 10 [OHCI])
        Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f7001000 (32-bit, non-prefetchable)
[size=2K]
        Region 1: I/O ports at 9400 [size=128]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 
faerun:/usr/src/linux-2.4.24#
[7.6.]
faerun:/usr/src/linux-2.4.24# cat /proc/scsi/scsi
Attached devices: none
[7.7.]
faerun:/usr/src/linux-2.4.24# cat /proc/acpi/info
version:                 20031002
states:                  S0 S1 S4 S5
faerun:/usr/src/linux-2.4.24# cat /proc/acpi/alarm
2004-01-27 11:00:10

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-01-30  6:14 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-29 18:11 CPU lockup during halt for Shuttle SB61G2 p4 with hyperthreading 2.4.24 tomepperly
2004-01-30  6:13 ` CPU lockup during halt for Shuttle SB61G2 p4 with hyperthreading 2.4.24 (untained kernel) Tom Epperly

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.