All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kukjin Kim <kgene@kernel.org>
To: 'Bartlomiej Zolnierkiewicz' <b.zolnierkie@samsung.com>,
	'Thomas Abraham' <thomas.ab@samsung.com>,
	'Sylwester Nawrocki' <s.nawrocki@samsung.com>,
	'Michael Turquette' <mturquette@baylibre.com>,
	'Kukjin Kim' <kgene@kernel.org>,
	'Viresh Kumar' <viresh.kumar@linaro.org>,
	'Krzysztof Kozlowski' <k.kozlowski@samsung.com>
Cc: 'Tomasz Figa' <tomasz.figa@gmail.com>,
	'Lukasz Majewski' <l.majewski@samsung.com>,
	'Heiko Stuebner' <heiko@sntech.de>,
	'Chanwoo Choi' <cw00.choi@samsung.com>,
	'Kevin Hilman' <khilman@linaro.org>,
	'Javier Martinez Canillas' <javier@dowhile0.org>,
	'Tobias Jakobi' <tjakobi@math.uni-bielefeld.de>,
	'Anand Moon' <linux.amoon@gmail.com>,
	linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: RE: [PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
Date: Fri, 07 Aug 2015 08:53:18 +0900	[thread overview]
Message-ID: <015301d0d0a3$1396c900$3ac45b00$@kernel.org> (raw)
In-Reply-To: <1438868514-8814-1-git-send-email-b.zolnierkie@samsung.com>

Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
Hi Bart,

> This patch series removes the use of Exynos4x12 specific support
> from cpufreq-exynos driver and enables the use of cpufreq-dt driver
> for this platform.
> 
Thanks for this series.

> This patch series has been tested on Exynos4412 based Odroid-U3 and
> Trats2 boards.
> 
Sounds good.

> Depends on:
> - next-20150806 branch of linux-next kernel tree
> - "[PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings"
>   (http://www.spinics.net/lists/arm-kernel/msg435408.html)
> 
BTW, hmm...how can we see this series in v4.3?...to be honest, I don't think it
can be done in v4.3 because of dependencies with PM / OPP series and previous
exynos CPU OPP series in each cross trees...maybe that's why you created based
on linux-next...any idea?

Thanks,
Kukjin

> Changes since v3
> (http://thread.gmane.org/gmane.linux.power-management.general/63464):
> - rebased on top of next-20150806 branch of linux-next kernel tree
> - made ARCH_EXYNOS config option select thermal support
> - made scaling_boost_freqs sysfs attribute available only when boost
>   support is enabled
> - added Acked-by tag from Viresh to patches #3, #4 and #5
> - added Tested-by tag from Tobias to patches #2-5
> - added Reviewed-by tag from Krzysztof to patch #4
> 
> Changes since v2
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/46653):
> - rebased on top of next-20150730 branch of linux-next kernel tree
> - ported over V3 of opp-v2 bindings support patch series
> - put cpu0 nodes in alphabetical order in dts files
> - added Reviewed-by tags from Javier and Krzysztof
> - added Acked-by tag from Sylwester
> 
> Changes since v1
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/44361):
> - rebased on top of next-20150629 branch of linux-next kernel tree
> - rebased on top of Exynos5250 cpufreq-dt support patch series
> - fixed if-statement in exynos4_clk_init() (noticed by Tobias Jakobi)
> - ported over opp-v2 bindings (requested by Viresh Kumar)
> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (6):
>   cpufreq: make scaling_boost_freqs sysfs attr available when boost is
>     enabled
>   clk: samsung: exynos4x12: add cpu clock configuration data and
>     instantiate cpu clock
>   ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
>   ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
>   cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
>   cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
> 
>  arch/arm/boot/dts/exynos4212.dtsi               |  81 ++++++++
>  arch/arm/boot/dts/exynos4412-odroid-common.dtsi |   4 +
>  arch/arm/boot/dts/exynos4412-origen.dts         |   4 +
>  arch/arm/boot/dts/exynos4412-trats2.dts         |   4 +
>  arch/arm/boot/dts/exynos4412.dtsi               |  83 +++++++++
>  arch/arm/mach-exynos/Kconfig                    |   2 +
>  arch/arm/mach-exynos/exynos.c                   |   2 +
>  drivers/clk/samsung/clk-exynos4.c               |  50 +++++
>  drivers/cpufreq/Kconfig                         |   4 -
>  drivers/cpufreq/Kconfig.arm                     |  38 ----
>  drivers/cpufreq/Makefile                        |   2 -
>  drivers/cpufreq/cpufreq-dt.c                    |   3 +
>  drivers/cpufreq/exynos-cpufreq.c                | 236 ------------------------
>  drivers/cpufreq/exynos-cpufreq.h                |  72 --------
>  drivers/cpufreq/exynos4x12-cpufreq.c            | 236 ------------------------
>  drivers/cpufreq/freq_table.c                    |  10 +-
>  include/linux/cpufreq.h                         |   1 +
>  17 files changed, 241 insertions(+), 591 deletions(-)
>  delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
>  delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
>  delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
> 
> --
> 1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: kgene@kernel.org (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform
Date: Fri, 07 Aug 2015 08:53:18 +0900	[thread overview]
Message-ID: <015301d0d0a3$1396c900$3ac45b00$@kernel.org> (raw)
In-Reply-To: <1438868514-8814-1-git-send-email-b.zolnierkie@samsung.com>

Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
Hi Bart,

> This patch series removes the use of Exynos4x12 specific support
> from cpufreq-exynos driver and enables the use of cpufreq-dt driver
> for this platform.
> 
Thanks for this series.

> This patch series has been tested on Exynos4412 based Odroid-U3 and
> Trats2 boards.
> 
Sounds good.

> Depends on:
> - next-20150806 branch of linux-next kernel tree
> - "[PATCH V3 00/16] OPP: Add code to support operating-points-v2 bindings"
>   (http://www.spinics.net/lists/arm-kernel/msg435408.html)
> 
BTW, hmm...how can we see this series in v4.3?...to be honest, I don't think it
can be done in v4.3 because of dependencies with PM / OPP series and previous
exynos CPU OPP series in each cross trees...maybe that's why you created based
on linux-next...any idea?

Thanks,
Kukjin

> Changes since v3
> (http://thread.gmane.org/gmane.linux.power-management.general/63464):
> - rebased on top of next-20150806 branch of linux-next kernel tree
> - made ARCH_EXYNOS config option select thermal support
> - made scaling_boost_freqs sysfs attribute available only when boost
>   support is enabled
> - added Acked-by tag from Viresh to patches #3, #4 and #5
> - added Tested-by tag from Tobias to patches #2-5
> - added Reviewed-by tag from Krzysztof to patch #4
> 
> Changes since v2
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/46653):
> - rebased on top of next-20150730 branch of linux-next kernel tree
> - ported over V3 of opp-v2 bindings support patch series
> - put cpu0 nodes in alphabetical order in dts files
> - added Reviewed-by tags from Javier and Krzysztof
> - added Acked-by tag from Sylwester
> 
> Changes since v1
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/44361):
> - rebased on top of next-20150629 branch of linux-next kernel tree
> - rebased on top of Exynos5250 cpufreq-dt support patch series
> - fixed if-statement in exynos4_clk_init() (noticed by Tobias Jakobi)
> - ported over opp-v2 bindings (requested by Viresh Kumar)
> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (6):
>   cpufreq: make scaling_boost_freqs sysfs attr available when boost is
>     enabled
>   clk: samsung: exynos4x12: add cpu clock configuration data and
>     instantiate cpu clock
>   ARM: dts: Exynos4x12: add CPU OPP and regulator supply property
>   ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12
>   cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support
>   cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option
> 
>  arch/arm/boot/dts/exynos4212.dtsi               |  81 ++++++++
>  arch/arm/boot/dts/exynos4412-odroid-common.dtsi |   4 +
>  arch/arm/boot/dts/exynos4412-origen.dts         |   4 +
>  arch/arm/boot/dts/exynos4412-trats2.dts         |   4 +
>  arch/arm/boot/dts/exynos4412.dtsi               |  83 +++++++++
>  arch/arm/mach-exynos/Kconfig                    |   2 +
>  arch/arm/mach-exynos/exynos.c                   |   2 +
>  drivers/clk/samsung/clk-exynos4.c               |  50 +++++
>  drivers/cpufreq/Kconfig                         |   4 -
>  drivers/cpufreq/Kconfig.arm                     |  38 ----
>  drivers/cpufreq/Makefile                        |   2 -
>  drivers/cpufreq/cpufreq-dt.c                    |   3 +
>  drivers/cpufreq/exynos-cpufreq.c                | 236 ------------------------
>  drivers/cpufreq/exynos-cpufreq.h                |  72 --------
>  drivers/cpufreq/exynos4x12-cpufreq.c            | 236 ------------------------
>  drivers/cpufreq/freq_table.c                    |  10 +-
>  include/linux/cpufreq.h                         |   1 +
>  17 files changed, 241 insertions(+), 591 deletions(-)
>  delete mode 100644 drivers/cpufreq/exynos-cpufreq.c
>  delete mode 100644 drivers/cpufreq/exynos-cpufreq.h
>  delete mode 100644 drivers/cpufreq/exynos4x12-cpufreq.c
> 
> --
> 1.9.1

  parent reply	other threads:[~2015-08-06 23:53 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-06 13:41 [PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 1/6] cpufreq: make scaling_boost_freqs sysfs attr available when boost is enabled Bartlomiej Zolnierkiewicz
2015-08-06 13:41   ` Bartlomiej Zolnierkiewicz
2015-08-07  3:41   ` Viresh Kumar
2015-08-07  3:41     ` Viresh Kumar
2015-08-07 10:34     ` Bartlomiej Zolnierkiewicz
2015-08-07 10:34       ` Bartlomiej Zolnierkiewicz
2015-08-07 10:41       ` Viresh Kumar
2015-08-07 10:41         ` Viresh Kumar
2015-08-07 11:12         ` Bartlomiej Zolnierkiewicz
2015-08-07 11:12           ` Bartlomiej Zolnierkiewicz
2015-08-07 11:37           ` Viresh Kumar
2015-08-07 11:37             ` Viresh Kumar
2015-08-07 22:21             ` Rafael J. Wysocki
2015-08-07 22:21               ` Rafael J. Wysocki
2015-08-08  2:06               ` Viresh Kumar
2015-08-08  2:06                 ` Viresh Kumar
2015-08-06 13:41 ` [PATCH v4 2/6] clk: samsung: exynos4x12: add cpu clock configuration data and instantiate cpu clock Bartlomiej Zolnierkiewicz
2015-08-06 13:41   ` Bartlomiej Zolnierkiewicz
2015-08-25 18:40   ` Michael Turquette
2015-08-25 18:40     ` Michael Turquette
2015-08-25 18:40     ` Michael Turquette
2015-08-25 18:40     ` Michael Turquette
2015-08-06 13:41 ` [PATCH v4 3/6] ARM: dts: Exynos4x12: add CPU OPP and regulator supply property Bartlomiej Zolnierkiewicz
2015-08-06 13:41   ` Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 4/6] ARM: Exynos: switch to using generic cpufreq driver for Exynos4x12 Bartlomiej Zolnierkiewicz
2015-08-06 13:41   ` Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 5/6] cpufreq: exynos: remove Exynos4x12 specific cpufreq driver support Bartlomiej Zolnierkiewicz
2015-08-06 13:41   ` Bartlomiej Zolnierkiewicz
2015-08-06 13:41 ` [PATCH v4 6/6] cpufreq: remove no longer needed CPU_FREQ_BOOST_SW config option Bartlomiej Zolnierkiewicz
2015-08-06 13:41   ` Bartlomiej Zolnierkiewicz
2015-08-07  4:31   ` Viresh Kumar
2015-08-07  4:31     ` Viresh Kumar
2015-08-06 23:53 ` Kukjin Kim [this message]
2015-08-06 23:53   ` [PATCH v4 0/6] cpufreq: use generic cpufreq drivers for Exynos4x12 platform Kukjin Kim
2015-08-07  3:50   ` Viresh Kumar
2015-08-07  3:50     ` Viresh Kumar
2015-08-07  3:51     ` Viresh Kumar
2015-08-07  3:51       ` Viresh Kumar
2015-08-07  4:13       ` Krzysztof Kozlowski
2015-08-07  4:13         ` Krzysztof Kozlowski
2015-08-07  4:30         ` Viresh Kumar
2015-08-07  4:30           ` Viresh Kumar
2015-08-07  4:52           ` Krzysztof Kozlowski
2015-08-07  4:52             ` Krzysztof Kozlowski
2015-08-07  5:18             ` Viresh Kumar
2015-08-07  5:18               ` Viresh Kumar
2015-08-07 11:31               ` Bartlomiej Zolnierkiewicz
2015-08-07 11:31                 ` Bartlomiej Zolnierkiewicz
2015-08-07 11:39                 ` Viresh Kumar
2015-08-07 11:39                   ` Viresh Kumar
2015-08-07 11:47                   ` Bartlomiej Zolnierkiewicz
2015-08-07 11:47                     ` Bartlomiej Zolnierkiewicz
2015-08-07 11:56                     ` Viresh Kumar
2015-08-07 11:56                       ` Viresh Kumar
2015-08-07 22:24                       ` Rafael J. Wysocki
2015-08-07 22:24                         ` Rafael J. Wysocki
2015-08-08  2:07                         ` Viresh Kumar
2015-08-08  2:07                           ` Viresh Kumar
2015-08-08  7:27                           ` Krzysztof Kozlowski
2015-08-08  7:27                             ` Krzysztof Kozlowski
2015-08-08 13:59                             ` Viresh Kumar
2015-08-08 13:59                               ` Viresh Kumar
2015-08-10  1:27                             ` Kukjin Kim
2015-08-10  1:27                               ` Kukjin Kim
2015-08-11  2:20                               ` Krzysztof Kozlowski
2015-08-11  2:20                                 ` Krzysztof Kozlowski
2015-08-11  7:51                                 ` Kukjin Kim
2015-08-11  7:51                                   ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='015301d0d0a3$1396c900$3ac45b00$@kernel.org' \
    --to=kgene@kernel.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=heiko@sntech.de \
    --cc=javier@dowhile0.org \
    --cc=k.kozlowski@samsung.com \
    --cc=khilman@linaro.org \
    --cc=l.majewski@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux.amoon@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=s.nawrocki@samsung.com \
    --cc=thomas.ab@samsung.com \
    --cc=tjakobi@math.uni-bielefeld.de \
    --cc=tomasz.figa@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.