Re: [PATCH v3 0/3] Add clock controller support for Spacemit K1

From: Krzysztof Kozlowski <krzk@kernel.org>
To: Haylen Chu <heylenay@4d2.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Haylen Chu <heylenay@outlook.com>
Cc: linux-riscv@lists.infradead.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Inochi Amaoto <inochiama@outlook.com>,
	Chen Wang <unicornxdotw@foxmail.com>,
	Jisheng Zhang <jszhang@kernel.org>
Subject: Re: [PATCH v3 0/3] Add clock controller support for Spacemit K1
Date: Tue, 26 Nov 2024 15:44:20 +0100	[thread overview]
Message-ID: <015ca99c-e3bd-4e45-8d92-0e0f4de6aacc@kernel.org> (raw)
In-Reply-To: <20241126143125.9980-2-heylenay@4d2.org>

On 26/11/2024 15:31, Haylen Chu wrote:
> The clock tree of Spacemit K1 is managed by several independent
> controllers in different SoC parts. In this series, all clock hardwares
> in APBS, MPMU, APBC and APMU, are implemented. With some changes to UART
> driver, CPU cores and UARTs could be brought up (see below). More clocks
> will be implemented later soon.
> 
> No device tree changes are included since Spacemit K1 UART needs two
> clocks to operate, but for now the driver gets only one. I would like to
> defer the changes until this is resolved.
> 
> This driver has been tested on BananaPi-F3 board and successfully
> brought up I2C, RTC, mmc and ethernet controllers. A clock tree dump
> could be obtained here[1].
> 
> [1]: https://gist.github.com/heylenayy/ebc6316692dd3aff56575dbf0eb4f1a9
> 
> Link: https://developer.spacemit.com/documentation?token=LCrKwWDasiJuROkVNusc2pWTnEb
> 
> Changed from v2
> - dt-binding fixes
What fixes? Be specific, what did you change?

Best regards,
Krzysztof