some problems with paride

some problems with paride

[Stefan Riha]

I have asked the question on the parport mailing list on torque.net but 
nobody have an answere for me. One people on the parport list has sayed to 
me, that i should ask my question on the linux kernel mailing list.
Now i hope that you can help me witch this question.

Now my question:

I want to use my Freecom portable CD-RW writer (2x2x24) under Linux.
The writer is with a Freecom parallel port cable connected to my computer.
For testing i have connected the writer on a 486 computer.
Now i have installed RedHat 6.2 and when i want to mount a data CD i get the
following errors.
Now i have Installed Suse 7.2 and i get the same errors when i want to mount
the data CD.

Now an concrete description of what i have done under RedHat 6.2

#lsmod
Module        Size    Used    by
lockd         31912    1      (autoclean)
sunrpc        53604    1      (autoclean) [locked]
rtl8139       12132    1      (autoclean)

#modprobe paride
paride: version 1.04 installed

#modprobe friq
paride: friq registered as protocol 0

#modprobe pcd
pcd: pcd version 1.07, major 46, nice 0
pcd0: Sharing parport0 at 0x378
pcd0: friq 1.01, Freecom IQ ASCI-2 adapter at 0x378, mode 4 (EPP-32), delay
1
pcd0: Master R/RW 2x2x24

#lsmod
Module                  Size  Used by
parport_probe           3272   0  (autoclean)
parport_pc              7400   1  (autoclean)
pcd                    11556   0  (unused)
friq                    8544   1 
paride                  3532   1  [pcd friq]
parport                 7516   1  [parport_probe parport_pc paride]
lockd                  31912   1  (autoclean)
sunrpc                 53604   1  (autoclean) [lockd]
rtl8139                12132   1  (autoclean)

Als nächstes wollte ich eine Daten CD mounten:

#mount /dev/pcd0 /mnt/cdrom
pcd0: WARNING: ATAPI phase errors
pcd0: Stuck DRQ 
pcd0: lock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
pcd0: read block before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
end_request: I/O error, dev 2e:00 (PCD), sector 2 
/dev/pcd0: Eingabe-/Ausgabefehler
pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
mount: blockorientiertes Gerät /dev/pcd0 ist schreibgeschützt, es wird im
       Nur-Lese-Modus gemountet
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2  
pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2 
mount: Kein Medium gefunden

I hope you can help me.

MFG
Stefan Riha