RE: [PATCH v7 0/9] arm64: Add the support for new Exynos5433 SoC

[Kukjin Kim <kgene@kernel.org>]

Chanwoo Choi wrote:
> 
> Dear Kukjin,
> 
Hi,

> Could you please pick or review this patch-set?
> 
Sorry for late response and honestly I was looking at the review in ml ;-)

Anyway I have no objection on this series except using ARCH_EXYNOS for clock
stuff in other series for exynos5433 but I agree we don't have other solution
at this moment.

I'll queue this series.

Thanks,
Kukjin

> Best Regards,
> Chanwoo Choi
> 
> On Wed, Mar 18, 2015 at 9:17 AM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> > This patchset adds new 64-bit Exynos5433 Samsung SoC which contains quad
> > Cortex-A57 and quad Cortex-A53. It is desigend with the 20nm low power process.
> >
> > Depends on:
> > - This patch-set has the dependency on Exynos5433 clock driver[1] and pinctrl driver[2].
> > The Exynos5433 clock controller patch-set[1] was merged by Michael Turquette.
> > and Exynos5433's pinctrl patch[2] was merged by Linus Walleij. Exynos5433's TMU patch[3]
> > will be refactoring without feature update.
> >
> > [1]
> http://git.linaro.org/people/mike.turquette/linux.git/commit/cc91909b9683c834485fd0627708c81d9398bf02
> > [2] https://git.kernel.org/cgit/linux/kernel/git/linusw/linux-pinctrl.git/commit/?h=for-
> next&id=3c5ecc9ed3537846fd95e8f288d6d6968075879f
> > [3] [PATCH 0/3] thermal: exynos: Add support for Exynos5433 TMU
> >     - https://lkml.org/lkml/2015/2/26/234
> >
> > Changelog:
> >
> > Changes fromv v6:
> > (https://lkml.org/lkml/2015/3/9/1036)
> > - Fix wrong base address of CMU_MSCL dt node (0x105d0000 -> 0x150d0000)
> > - Adjust the length of memory mapped region for all clock domains
> >
> > Changes from v5:
> > (https://lkml.org/lkml/2015/3/5/27)
> > - Move 'timer' dt node under root node by Mark Rutland's comment
> >
> > Changes from v4:
> > (https://lkml.org/lkml/2015/2/24/2)
> > - Rebased it on Linux 4.0-rc2
> > - Remove CONFIG_ARCH_EXYNOS5433 configuration by Arnd Bergmann's comment
> > - Move 'aliases' dt node from SoC dtsi to board dts file by Arnd Bergmann's comment
> > - Add Exynos5433 TMU patches which got the Lukasz Majewski's reviewed message
> >
> > Changes from v3:
> > (https://lkml.org/lkml/2015/2/12/65)
> > - Rebased it on Linux 4.0-rc1.
> > - Remove ARM_GIC and ARM_AMBA dependency because CONFIG_ARM64 already included them.
> >
> > Changes from v2:
> > (https://lkml.org/lkml/2014/12/2/134)
> > : Fix the range of GICC memory map (0x1000 -> 0x2000)
> > : Fix address space of 'range' property under 'soc' node
> > : Add ADMA / I2S dt node for sound playback/capture
> > - Select ARM_AMBA/ARM_GIC/HAVE_S3C_RTC for Exynos5433 in arch/arm64/Kconfig
> > - Send separate patch-set for Exynos5433 clock controller[1][2] and pinctrl[3]
> >
> > Changes from v1:
> > (https://lkml.org/lkml/2014/11/27/92)
> > - Merge two patches (patch2, patch3) to solve incomplete description
> > - Exynos5433 Clock driver
> >  : Fix wrong register and code clean by using space instead of tab
> >  : Add CLK_IGNORE_UNUSED flag to pclk_sysreg_* clock for accessing system control register
> >  : Remove duplicate definition on the patch for CMU_BUS{0|1|2} domain
> > - Exynos5433 SoC DTS
> >  : Remove un-supported properties of arch_timer
> >  : Remove 'clock-frequency' property from 'cpus' dt node
> >  : Fix interrupt type from edge rising triggering to level high triggering
> >    because Cortex-A53/A57 use level triggering.
> >  : Fix defult address-size/size-celss from 1 to 2 because Exynos5433 is 64-bit SoC
> >  : Modify 'fin_pll' dt node to remove un-needed and ugly code
> >  : Move 'chipid' dt node under 'soc'
> >  : Use lowercase on all case in exynos5433.dtsi
> >  : Add PSCI dt node for secondary cpu boot
> >  : Add 'samsung,exynos5433' compatible to MCT dt node
> > - Divide pinctrl patch from this patchset
> > - Add new following patches:
> >   : clocksource: exynos_mct: Add the support for Exynos 64bit SoC
> >   : arm64: Enable Exynos5433 SoC in the defconfig
> > -----------------------------------------------------
> >
> > Chanwoo Choi (6):
> >   arm64: dts: exynos: Add dts files for 64-bit Exynos5433 SoC
> >   arm64: dts: exynos: Add SPI/PDMA dt node for Exynos5433
> >   arm64: dts: exynos: Add PMU dt node for Exynos5433
> >   arm64: dts: exynos: Add RTC and ADC dt node for Exynos5433 SoC
> >   arm64: dts: exynos: Add TMU sensor dt node for Exynos5433 SoC
> >   arm64: dts: exynos: Add thermal-zones dt node for Exynos5433 SoC
> >
> > Inha Song (2):
> >   arm64: dts: exynos: Add ADMA dt node for Exynos5433 SoC
> >   arm64: dts: exynos: Add I2S dt node for Exynos5433 SoC
> >
> > Jaehoon Chung (1):
> >   arm64: dts: exynos: Add MSHC dt node for Exynos5433
> >
> >  .../devicetree/bindings/arm/samsung/pmu.txt        |   1 +
> >  arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++
> >  .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |  22 +
> >  arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     | 231 +++++
> >  arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 931 +++++++++++++++++++++
> >  5 files changed, 1883 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi