AW: [PATCH 1/2] irqchip/irq-realtek-rtl: Add/simplify register helpers

["Markus Stockhausen" <markus.stockhausen@gmx.de>]

> Von: Thomas Gleixner <tglx@kernel.org> 
> Gesendet: Mittwoch, 3. Juni 2026 17:57
> An: Markus Stockhausen <markus.stockhausen@gmx.de>;
linux-kernel@vger.kernel.org
> Cc: Markus Stockhausen <markus.stockhausen@gmx.de>
> Betreff: Re: [PATCH 1/2] irqchip/irq-realtek-rtl: Add/simplify register
helpers
> ...
> > -
> > -	value = readl(REG(RTL_ICTL_GIMR));
> > -	value &= ~BIT(i->hwirq);
> > -	writel(value, REG(RTL_ICTL_GIMR));
> > -
> > +	disable_gimr(i->hwirq);
> >  	raw_spin_unlock_irqrestore(&irq_lock, flags);
> >  }
> >  
> > @@ -89,7 +98,7 @@ static int intc_map(struct irq_domain *d, unsigned int
irq, irq_hw_number_t hw)
> >  	irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);
> >  
>        guard(raw_spinlock_irq)(&lock);
>
> _irq because this is task context.
>
> >  	raw_spin_lock_irqsave(&irq_lock, flags);
> > -	write_irr(REG(RTL_ICTL_IRR0), hw, 1);
> > +	write_irr(hw, 1);
> >  	raw_spin_unlock_irqrestore(&irq_lock, flags);
> >  
> >  	return 0;

The above is the only one of your guides I'm unsure about. 
With the whole series adapted and applied I finally get 

static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t
hw)
{
	unsigned int cpu;

	irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);

	guard(raw_spinlock_irq)(&irq_lock);
	for_each_cpu(cpu, &realtek_ictl_cpu_configurable)
		write_irr(cpu, hw, 1);

	return 0;
}

Boot gives a warning.

[    0.009035] ------------[ cut here ]------------
[    0.014075] WARNING: CPU: 0 PID: 0 at init/main.c:1059
start_kernel+0x3a0/0x510
[    0.022115] Interrupts were enabled early
[    0.026483] Modules linked in:
[    0.029846] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.33 #0
NONE
[    0.029871] Hardware name: Linksys LGS328C
[    0.029878] Stack : 80b7dddc 00000031 00000000 00000001 00000000 00000000
00000000 00000000
[    0.029929]         00000000 00000000 00000000 00000000 00000000 00000001
80b7dd98 00000000
[    0.029975]         00000000 00000000 80a846d4 80b7dc30 00000000 ffffefff
00000001 00000031
[    0.030022]         00000033 80b7dbf4 00000033 00000264 00000001 00000000
80a846d4 80b7dea8
[    0.030069]         00000000 80c23ec4 80b95238 80100000 00000000 80b9d4d0
00000000 813a0000
[    0.030116]         ...
[    0.030125] Call Trace:
[    0.030129] [<80114e38>] show_stack+0x28/0xf0
[    0.030163] [<8010e0ec>] dump_stack_lvl+0x70/0xb0
[    0.030197] [<801390cc>] __warn+0x9c/0x114
[    0.030227] [<801392c4>] warn_slowpath_fmt+0x180/0x188
[    0.030246] [<80c23ec4>] start_kernel+0x3a0/0x510

This goes away with switching to guard(raw_spinlock_irqsave)().

Anything I'm missing here?

Thanks in advance.

Markus