* [parisc-linux] Problem with Samba on a D370
@ 2002-01-03 1:33 Herb Radford
2002-01-03 9:32 ` Richard Hirst
0 siblings, 1 reply; 6+ messages in thread
From: Herb Radford @ 2002-01-03 1:33 UTC (permalink / raw)
To: parisc-linux
OK, I'm trying to set up Samba on this D370 and have a small problem.
SMBD daemon starts but fails with "failed to open /etc/samba/secrets.tdb".
So I tried "strace -f smbd -D" and thats where I run out of knowledge!
I'm including the strace output but to me it looks like something I read on
the Samba mailing list archives while poking about for an answer. It seems
that there was some problem with 64-bit vs. 32-bit parameters at one time
(I think in 2.2-2 which is what my version is) and I hope someone can give
me a few pointers. ;) I don't know if this is a Samba problem or a Debian
problem so I'll just ask!
Do a search on secrets and the line in question is 8 lines later where
fcntl returns EINVAL for a start of -84932400??? which is 0xfaf008d0,
uncommonly similar to part of the LLSEEK parameter 2 line above.
Well that's my thought anyway.
Regards, Herb
1055 execve("/usr/sbin/smbd", ["smbd", "-D"], [/* 14 vars */]) = 0
1055 newuname({sys="Linux", node="HP-D370", ...}) = 0
1055 brk(0) = 0x1e8000
1055 open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or
directory)
1055 open("/etc/ld.so.cache", O_RDONLY) = 3
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 5568, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40019000
1055 close(3) = 0
1055 open("/usr/lib/libcups.so.2", O_RDONLY) = 3
1055 read(3,
"\177ELF\1\2\1\3\0\0\0\0\0\0\0\0\0\3\0\17\0\0\0\1\0\0E\330"..., 1024) = 1024
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x4001b000
1055 mmap(NULL, 182992, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4002a000
1055 mprotect(0x40044000, 76496, PROT_NONE) = 0
1055 mmap(0x40053000, 12288, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED, 3, 0x19000) = 0x40053000
1055 mmap(0x40056000, 2768, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40056000
1055 close(3) = 0
1055 open("/lib/libdl.so.2", O_RDONLY) = 3
1055 read(3, "\177ELF\1\2\1\3\0\0\0\0\0\0\0\0\0\3\0\17\0\0\0\1\0\0\37"...,
1024) = 1024
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 75588, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40057000
1055 mprotect(0x4005a000, 63300, PROT_NONE) = 0
1055 mmap(0x40069000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED, 3, 0x2000) = 0x40069000
1055 close(3) = 0
1055 open("/lib/libnsl.so.1", O_RDONLY) = 3
1055 read(3, "\177ELF\1\2\1\3\0\0\0\0\0\0\0\0\0\3\0\17\0\0\0\1\0\0IL"...,
1024) = 1024
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 169920, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4006a000
1055 mprotect(0x40081000, 75712, PROT_NONE) = 0
1055 mmap(0x40090000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED, 3, 0x16000) = 0x40090000
1055 mmap(0x40092000, 6080, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40092000
1055 close(3) = 0
1055 open("/lib/libpam.so.0", O_RDONLY) = 3
1055 read(3, "\177ELF\1\2\1\3\0\0\0\0\0\0\0\0\0\3\0\17\0\0\0\1\0\0\33"...,
1024) = 1024
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 99184, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40094000
1055 mprotect(0x4009c000, 66416, PROT_NONE) = 0
1055 mmap(0x400ab000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED, 3, 0x7000) = 0x400ab000
1055 close(3) = 0
1055 open("/lib/libc.so.6", O_RDONLY) = 3
1055 read(3, "\177ELF\1\2\1\3\0\0\0\0\0\0\0\0\0\3\0\17\0\0\0\1\0\2?@"...,
1024) = 1024
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 1404268, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x400ad000
1055 mprotect(0x401e7000, 118124, PROT_NONE) = 0
1055 mmap(0x401f6000, 45056, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED, 3, 0x139000) = 0x401f6000
1055 mmap(0x40201000, 11628, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40201000
1055 close(3) = 0
1055 open("/lib/libcrypt.so.1", O_RDONLY) = 3
1055 read(3, "\177ELF\1\2\1\3\0\0\0\0\0\0\0\0\0\3\0\17\0\0\0\1\0\0\v"...,
1024) = 1024
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 247464, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40204000
1055 mprotect(0x4020a000, 222888, PROT_NONE) = 0
1055 mmap(0x40219000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED, 3, 0x5000) = 0x40219000
1055 mmap(0x4021a000, 157352, PROT_READ|PROT_WRITE|PROT_EXEC,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4021a000
1055 close(3) = 0
1055 munmap(0x40019000, 5568) = 0
1055 geteuid() = 0
1055 time(NULL) = 1009908465
1055 brk(0) = 0x1e8000
1055 brk(0x1e8030) = 0x1e8030
1055 brk(0x1e9000) = 0x1e9000
1055 open("/etc/localtime", O_RDONLY) = 3
1055 fstat64(3, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40019000
1055 read(3, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\2\0\0\0\2\0"...,
4096) = 1218
1055 close(3) = 0
1055 munmap(0x40019000, 4096) = 0
1055 open("/dev/urandom", O_RDONLY|O_LARGEFILE) = 3
1055 setresuid(ruid 0, euid 0, suid 0) = 0
1055 setuid(0) = 0
1055 geteuid() = 0
1055 getuid() = 0
1055 setresgid(rgid 0, egid 0, sgid 0) = 0
1055 setgid(0) = 0
1055 getegid() = 0
1055 getgid() = 0
1055 rt_sigaction(SIGSEGV, {0x196bee, [], SA_RESTART}, NULL, 8) = 0
1055 rt_sigaction(SIGBUS, {0x196bee, [], SA_RESTART}, NULL, 8) = 0
1055 rt_sigaction(SIGTERM, {0x19648e, [], SA_RESTART}, NULL, 8) = 0
1055 rt_sigprocmask(SIG_BLOCK, [PIPE], NULL, 8) = 0
1055 rt_sigprocmask(SIG_BLOCK, [FPE], NULL, 8) = 0
1055 rt_sigprocmask(SIG_BLOCK, [USR2], NULL, 8) = 0
1055 rt_sigprocmask(SIG_UNBLOCK, [HUP], NULL, 8) = 0
1055 rt_sigprocmask(SIG_UNBLOCK, [USR1], NULL, 8) = 0
1055 umask(0) = 022
1055 geteuid() = 0
1055 getegid() = 0
1055 getgroups(0, 0xfaf003c8) = 1
1055 getgroups(1, [0]) = 1
1055 umask(022) = 0
1055 open("/var/log/samba/log.smbd",
O_WRONLY|O_APPEND|O_CREAT|O_LARGEFILE, 0666) = 4
1055 fstat64(4, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40019000
1055 fstat64(4, {st_mode=0, st_size=0, ...}) = 0
1055 _llseek(0x4, 0, 0x111e, 0xfaf00a88, 0) = 0
1055 munmap(0x40019000, 4096) = 0
1055 umask(0) = 022
1055 umask(022) = 0
1055 open("/var/log/samba/log.smbd",
O_WRONLY|O_APPEND|O_CREAT|O_LARGEFILE, 0666) = 5
1055 fstat64(5, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40019000
1055 fstat64(5, {st_mode=0, st_size=0, ...}) = 0
1055 _llseek(0x5, 0, 0x111e, 0xfaf00f08, 0) = 0
1055 munmap(0x40019000, 4096) = 0
1055 close(4) = 0
1055 umask(0) = 022
1055 stat64("/etc/samba/smb.conf", {st_mode=0, st_size=0, ...}) = 0
1055 open("/etc/samba/smb.conf", O_RDONLY|O_LARGEFILE) = 4
1055 fstat64(4, {st_mode=0, st_size=0, ...}) = 0
1055 brk(0x1ec000) = 0x1ec000
1055 read(4, "# This is the main Samba configu"..., 8882) = 8882
1055 close(4) = 0
1055 getpid() = 1055
1055 brk(0x1ed000) = 0x1ed000
1055 open("/etc/printcap", O_RDONLY|O_LARGEFILE) = 4
1055 fstat64(4, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40019000
1055 read(4, "# /etc/printcap: printer capabil"..., 4096) = 643
1055 read(4, "", 4096) = 0
1055 close(4) = 0
1055 munmap(0x40019000, 4096) = 0
1055 stat64("", 0xfaf00c90) = -1 ENOENT (No such file or directory)
1055 umask(022) = 0
1055 open("/var/log/samba/log.smbd",
O_WRONLY|O_APPEND|O_CREAT|O_LARGEFILE, 0666) = 4
1055 fstat64(4, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40019000
1055 fstat64(4, {st_mode=0, st_size=0, ...}) = 0
1055 _llseek(0x4, 0, 0x111e, 0xfaf01388, 0) = 0
1055 munmap(0x40019000, 4096) = 0
1055 close(5) = 0
1055 umask(0) = 022
1055 stat64("/etc/samba/smb.conf", {st_mode=0, st_size=0, ...}) = 0
1055 umask(022) = 0
1055 open("/var/log/samba/log.smbd",
O_WRONLY|O_APPEND|O_CREAT|O_LARGEFILE, 0666) = 5
1055 fstat64(5, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40019000
1055 fstat64(5, {st_mode=0, st_size=0, ...}) = 0
1055 _llseek(0x5, 0, 0x111e, 0xfaf00f08, 0) = 0
1055 munmap(0x40019000, 4096) = 0
1055 close(4) = 0
1055 umask(0) = 022
1055 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4
1055 ioctl(4, 0x8912, 0xfaf015d0) = 0
1055 ioctl(4, 0x8915, 0xfaf01600) = 0
1055 ioctl(4, 0x8913, 0xfaf01600) = 0
1055 ioctl(4, 0x891b, 0xfaf01600) = 0
1055 ioctl(4, 0x8915, 0xfaf015e0) = 0
1055 ioctl(4, 0x8913, 0xfaf015e0) = 0
1055 ioctl(4, 0x891b, 0xfaf015e0) = 0
1055 close(4) = 0
1055 brk(0x1ef000) = 0x1ef000
1055 newuname({sys="Linux", node="HP-D370", ...}) = 0
1055 getrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=1024}) = 0
1055 setrlimit(RLIMIT_NOFILE, {rlim_cur=1024, rlim_max=10010}) = 0
1055 setrlimit(RLIMIT_NOFILE, {rlim_cur=10010, rlim_max=10010}) = 0
1055 getrlimit(RLIMIT_NOFILE, {rlim_cur=10010, rlim_max=10010}) = 0
1055 open("/etc/samba/secrets.tdb", O_RDWR|O_CREAT|O_LARGEFILE, 0600) = 4
1055 fcntl(4, F_SETLKW, {type=F_WRLCK, whence=SEEK_SET, start=1024,
len=0}) = 0
1055 fcntl(4, F_SETLK, {type=F_WRLCK, whence=SEEK_SET, start=1024, len=0}) = 0
1055 read(4, "TDB file\n\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
168) = 168
1055 fstat64(4, {st_mode=0, st_size=0, ...}) = 0
1055 mmap2(NULL, 696, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0) = 0x40019000
1055 _llseek(0x4, 0, 0x28, 0xfaf00b48, 0) = 0
1055 write(4, "\0\0\0\0", 4) = 4
1055 fcntl(4, F_SETLK, {type=F_UNLCK, whence=SEEK_SET, start=-84932400,
len=0}) = -1 EINVAL (Invalid argument)
1055 munmap(0x40019000, 696) = 0
1055 close(4) = 0
1055 time(NULL) = 1009908466
1055 brk(0x1f2000) = 0x1f2000
1055 time([1009908466]) = 1009908466
1055 getpid() = 1055
1055 rt_sigaction(SIGPIPE, {0x401fc39a, [], 0}, {SIG_DFL}, 8) = 0
1055 socket(PF_UNIX, SOCK_DGRAM, 0) = 4
1055 fcntl(4, F_SETFD, FD_CLOEXEC) = 0
1055 connect(4, {sin_family=AF_UNIX, path="/dev/log"}, 16) = 0
1055 send(4, "<27>Jan 1 13:07:46 smbd[1055]: "..., 91, 0) = 91
1055 rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
1055 geteuid() = 0
1055 fstat64(5, {st_mode=0, st_size=0, ...}) = 0
1055 write(5, "[2002/01/01 13:07:46, 0] passdb/"..., 59) = 59
1055 time([1009908466]) = 1009908466
1055 getpid() = 1055
1055 rt_sigaction(SIGPIPE, {0x401fc39a, [], 0}, {SIG_DFL}, 8) = 0
1055 send(4, "<27>Jan 1 13:07:46 smbd[1055]: "..., 72, 0) = 72
1055 rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
1055 geteuid() = 0
1055 write(5, " Failed to open /etc/samba/secr"..., 40) = 40
1055 stat64("/usr/share/samba/codepages/codepage.850", {st_mode=0,
st_size=0, ...}) = 0
1055 open("/usr/share/samba/codepages/codepage.850", O_RDONLY|O_LARGEFILE) = 6
1055 read(6, "\1\0R\3|\0\0\0", 8) = 8
1055 read(6,
"\205\267\1\1\240\265\1\1\203\266\1\1\306\307\1\1\204\216"..., 124) = 124
1055 close(6) = 0
1055 stat64("/usr/share/samba/codepages/unicode_map.850", {st_mode=0,
st_size=0, ...}) = 0
1055 open("/usr/share/samba/codepages/unicode_map.850",
O_RDONLY|O_LARGEFILE) = 6
1055 fstat64(6, {st_mode=0, st_size=0, ...}) = 0
1055 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40019000
1055 read(6, "\1\200850\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\2\0\0\0\0"...,
4096) = 4096
1055 mmap(NULL, 135168, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x40241000
1055 read(6, "\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_"...,
126976) = 126976
1055 read(6, "\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_\0_"..., 4096)
= 542
1055 close(6) = 0
1055 munmap(0x40019000, 4096) = 0
1055 rt_sigaction(SIGHUP, {0x19649e, [], SA_RESTART}, NULL, 8) = 0
1055 fork() = 1056
1055 --- SIGCHLD (Child exited) ---
1055 exit(0) = ?
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [parisc-linux] Problem with Samba on a D370
2002-01-03 1:33 [parisc-linux] Problem with Samba on a D370 Herb Radford
@ 2002-01-03 9:32 ` Richard Hirst
2002-01-03 12:38 ` Peter Mottram
0 siblings, 1 reply; 6+ messages in thread
From: Richard Hirst @ 2002-01-03 9:32 UTC (permalink / raw)
To: Herb Radford; +Cc: parisc-linux
On Wed, Jan 02, 2002 at 08:33:54PM -0500, Herb Radford wrote:
> OK, I'm trying to set up Samba on this D370 and have a small problem.
> SMBD daemon starts but fails with "failed to open /etc/samba/secrets.tdb".
> So I tried "strace -f smbd -D" and thats where I run out of knowledge!
> I'm including the strace output but to me it looks like something I read on
> the Samba mailing list archives while poking about for an answer. It seems
> that there was some problem with 64-bit vs. 32-bit parameters at one time
> (I think in 2.2-2 which is what my version is) and I hope someone can give
> me a few pointers. ;) I don't know if this is a Samba problem or a Debian
> problem so I'll just ask!
>
> Do a search on secrets and the line in question is 8 lines later where
> fcntl returns EINVAL for a start of -84932400??? which is 0xfaf008d0,
> uncommonly similar to part of the LLSEEK parameter 2 line above.
"samba busted see #126763, hppa glibc problem with file locking"
Check that bug # on bugs.debian.org for more details. There is a patch
to samba to avoid the glibc problem there, I think, but I havn't tried
it.
Richard
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [parisc-linux] Problem with Samba on a D370
2002-01-03 9:32 ` Richard Hirst
@ 2002-01-03 12:38 ` Peter Mottram
2002-01-06 3:52 ` Peter Lavender
0 siblings, 1 reply; 6+ messages in thread
From: Peter Mottram @ 2002-01-03 12:38 UTC (permalink / raw)
To: Herb Radford; +Cc: parisc-linux
Herb
This is fixed in the latest Debian version of samba available in the
unstable/sid distribution. The new version number of the samba packages
is: 2.2.2-4
This package doesn't yet appear to be built for hppa, but if you add an
appropriate deb-src line for sid in your sources.list file then you can
download and build the new samba packages using:
apt-get source samba --build
& then install the packages using 'dpkg -i'
Hope I'm not teaching grandma to suck eggs here.
Regards
PeteM
On Thu, 3 Jan 2002, Richard Hirst wrote:
> On Wed, Jan 02, 2002 at 08:33:54PM -0500, Herb Radford wrote:
[snip]
>
> "samba busted see #126763, hppa glibc problem with file locking"
>
> Check that bug # on bugs.debian.org for more details. There is a patch
> to samba to avoid the glibc problem there, I think, but I havn't tried
> it.
>
> Richard
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [parisc-linux] Problem with Samba on a D370
2002-01-03 12:38 ` Peter Mottram
@ 2002-01-06 3:52 ` Peter Lavender
2002-01-06 5:08 ` Matt Taggart
0 siblings, 1 reply; 6+ messages in thread
From: Peter Lavender @ 2002-01-06 3:52 UTC (permalink / raw)
To: Peter Mottram; +Cc: parisc-linux
Peter,
> This package doesn't yet appear to be built for hppa, but if you add an
> appropriate deb-src line for sid in your sources.list file then you can
> download and build the new samba packages using:
>
> apt-get source samba --build
>
> & then install the packages using 'dpkg -i'
>
> Hope I'm not teaching grandma to suck eggs here.
You may be for Herb, but for those of us new to Debian, this is a great way
to learn something without having to ask first. :)
What do you mean by an appropriate line in the sources.list? Is it a link
to the location of the samba package?
Thanks,
Pete
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [parisc-linux] Problem with Samba on a D370
2002-01-06 3:52 ` Peter Lavender
@ 2002-01-06 5:08 ` Matt Taggart
2002-01-06 8:29 ` Andrew Shugg
0 siblings, 1 reply; 6+ messages in thread
From: Matt Taggart @ 2002-01-06 5:08 UTC (permalink / raw)
To: Peter Lavender; +Cc: Peter Mottram, parisc-linux, taggart
"Peter Lavender" writes...
> What do you mean by an appropriate line in the sources.list? Is it a link
> to the location of the samba package?
`man sources.list` and read about deb-src.
--
Matt Taggart Linux Development Lab
taggart@fc.hp.com HP Linux Systems Operation
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [parisc-linux] Problem with Samba on a D370
2002-01-06 5:08 ` Matt Taggart
@ 2002-01-06 8:29 ` Andrew Shugg
0 siblings, 0 replies; 6+ messages in thread
From: Andrew Shugg @ 2002-01-06 8:29 UTC (permalink / raw)
To: parisc-linux
Quoth Matt Taggart:
> "Peter Lavender" writes...
>
> > What do you mean by an appropriate line in the sources.list? Is it a link
> > to the location of the samba package?
>
> `man sources.list` and read about deb-src.
>
> --
> Matt Taggart Linux Development Lab
> taggart@fc.hp.com HP Linux Systems Operation
Also, feel free to ask any Debian-related questions (newbie or
otherwise) on the debian-hppa mailing list[1].
Andrew.
[1] http://www.debian.org/MailingLists/subscribe
--
Andrew Shugg <andrew@neep.com.au> http://www.neep.com.au/
"Just remember, Mr Fawlty, there's always someone worse off than yourself."
"Is there? Well I'd like to meet him. I could do with a good laugh."
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-01-06 8:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-01-03 1:33 [parisc-linux] Problem with Samba on a D370 Herb Radford
2002-01-03 9:32 ` Richard Hirst
2002-01-03 12:38 ` Peter Mottram
2002-01-06 3:52 ` Peter Lavender
2002-01-06 5:08 ` Matt Taggart
2002-01-06 8:29 ` Andrew Shugg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.