* [parisc-linux] Linux on HP
@ 2003-11-14 17:41 Damian Muchliński
2003-11-14 18:11 ` Joel Soete
` (3 more replies)
0 siblings, 4 replies; 14+ messages in thread
From: Damian Muchliński @ 2003-11-14 17:41 UTC (permalink / raw)
To: parisc-linux
[-- Attachment #1.1: Type: text/plain, Size: 688 bytes --]
Hello
I'm trying to set-up linux on HP computer. First I've tried Debian Stable
Woody relase with 2.4.17 kernel but i got message WARNING! Stack pointer
and cr30 do not correspond! I've found on newsgroup that because of old
version of gcc and kernel and I should use newer version. So I have
downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
website,check md5, burned and booted.
Unfortunately it hangs on "searching for devices" without any more info.
I would be very gratefull if you could help me solve this problem. Maybe
somemone else had similar problem.
I've attached files with bugreport.
Thanks for any suggestions, waiting for reply from you.
[-- Attachment #1.2: Type: text/html, Size: 1283 bytes --]
[-- Attachment #2: komunikat 2.txt --]
[-- Type: text/plain, Size: 27847 bytes --]
Main Menu: Enter command > bo ide
Interact with IPL (Y, N, Q)?> y
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
palo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002
Boot image contains:
0/vmlinux32 3687647 bytes @ 0x608000
0/vmlinux64 4719374 bytes @ 0x98c800
0/ramdisk 2663046 bytes @ 0xe0d000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).Current command
line:
0/vmlinux ramdisk_size=8192 root=/dev/ram initrd=0/ramdisk console=ttyS0 TERM=vt
102
0: 0/vmlinux
1: ramdisk_size=8192
2: root=/dev/ram
3: initrd=0/ramdisk
4: console=ttyS0
5: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? b
Command line for kernel: 'ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt1
02 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /ramdisk from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...Both kernels available, choosing
32-bit kernelELF32 execut
Entry 00100000 first 00100000 n 5
Segment 0 load 00100000 size 2024492 mediaptr 0x1000
Segment 1 load 002f0000 size 299320 mediaptr 0x1f0000
Segment 2 load 0033c000 size 401408 mediaptr 0x23a000
Segment 3 load 003a0000 size 32768 mediaptr 0x29c000
Segment 4 load 003c90f8 size 102032 mediaptr 0x2a40f8
Loading ramdisk 2663046 bytes @ 3fd65000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mail
Linux version 2.4.17-32 (root@paer) (gcc version 3.0.4) #1 Sat Mar 16 17:09:00 M
ST 2002
FP[0] enabled: Rev 1 Model 19
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005dc0 00000481 00000000 00000002 77634812 100000f0 00000008 000000b2 00
0000b2
vers 00000203
CPUID vers 19 rev 7 (0x00000267)
model 9000/785/C3700
Total Memory: 2048 Mb
initrd: 4fd65000-4ffef286
initrd: reserving 3fd65000-3ffef286 (mem_max 80000000)
pagetable_init
On node 0 totalpages: 524288
zone(0): 524288 page
zone(1): 0 pages.
zone(2): 0 pages.
LCD display at f05d0008,f05d0000 registered
Kernel command line: ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt102 pa
lo_kernel=0/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 1497.49 BogoMIPS
Memory: 2058652k available
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 1310
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Searching for devices...
Found devices:
1. Astro BC Runway Port (12) at 0xfed00000 [10], versions 0x582, 0x0, 0xb
2. Elroy PCI Bridge (13) at 0xfed30000 [10/0], versions 0x782, 0x0, 0xa
3. Elroy PCI Bridge (13) at 0xfed32000 [10/1], versions 0x782, 0x0, 0xa
4. Elroy PCI Bridge (13) at 0xfed38000 [10/4], versions 0x782, 0x0, 0xa
5. Elroy PCI Bridge (13) at 0xfed3c000 [10/6], versions 0x782, 0x0, 0xa
6. Unknown machine (0) at 0xfffa0000 [32], version
7. Memory (1) at 0xfed10200 [49], versions 0x9c, 0x0, 0x9
CPU(s): 1 x PA8600 (PCX-W+) at 750.000000 MHz
SBA found Astro 2.1 at 0xfed00000
lba version TR4.0 (0x5) found at 0xfed30000
lba version TR4.0 (0x5) found at 0xfed32000
lba version TR4.0 (0x5) found at 0xfed38000
lba version TR4.0 (0x5) found at 0xfed3c000
iosapic: hpa not registered for PCI device 103c:1008 (Hewlett-Packard Company)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Enabled soft power switch (polling mode, io=0xf0400804).
SuperIO: Found NS87560 Legacy I/O device at 00:0e.1 (IRQ 64)
SuperIO: Serial port 1 at 0x3f8
SuperIO: Serial port 2 at 0x2f8
SuperIO: Parallel port at 0x378
SuperIO: Floppy controller at 0x3f0
SuperIO: ACPI at 0x7e0
SuperIO: USB regulator enabled
parport0: PC-style at 0x378, irq 101 [PCSPP(,...)]
Starting kswapd
Journalled Block Device driver loaded
PCI graphic ROM found at f7000000 (2048 kB), fb @ fa000000 (32 MB)
STI word mode ROM at f7000044, hpa=fa000000
STI word mode ROM, id 35acda30-9a02587, conforms to spec rev. 8.0d
STI device: A1299B
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at port 0x03f8 (irq = 99) is a 16550A
ttyS01 at port 0x02f8 (irq = 100) is a 16550A
lp0: using parport0 (interrupt-driven).
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NS87415: IDE controller on PCI bus 00 dev 70
NS87415: chipset revision 3
NS87415: 100% native mode on irq 103
ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio
hda: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0xf00-0xf07,0xe02 on
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1200 status 7809 advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0x1000, 00:30:6E:21:4B:D2, IRQ 66.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 15, function 0
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 0, device 15, function 1
sym53c8xx: 53c896 detected
sym53c896-0: rev 0x7 on pci bus 0 device 15 function 0 irq 65
sym53c896-0: ID 7, Fast-20, Parity Checking
Linux version 2.4.17-32 (root@paer) (gcc version 3.0.4) #1 Sat Mar 16 17:09:00 M
ST 2002
FP[0] enabled: Rev 1 Model 19
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005dc0 00000481 00000000 00000002 77634812 100000f0 00000008 000000b2 00
0000b2
vers 00000203
CPUID vers 19 rev 7 (0x00000267)
model 9000/785/C3700
Total Memory: 2048 Mb
initrd: 4fd65000-4ffef286
initrd: reserving 3fd65000-3ffef286 (mem_max 80000000)
pagetable_init
On node 0 totalpages: 524288
zone(0): 524288 pages.
zone(1): 0 pages.
zone(2): 0 pages.
LCD display at f05d0008,f05d0000 registered
Kernel command line: ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt102 pa
lo_kernel=0/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 1497.49 BogoMIPS
Memory: 2058652k available
Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Searching for devices...
Found devices:
1. Astro BC Runway Port (12) at 0xfed00000 [10], versions 0x582, 0x0, 0xb
2. Elroy PCI Bridge (13) at 0xfed30000 [10/0], versions 0x782, 0x0, 0xa
3. Elroy PCI Bridge (13) at 0xfed32000 [10/1], versions 0x782, 0x0, 0xa
4. Elroy PCI Bridge (13) at 0xfed38000 [10/4], versions 0x782, 0x0, 0xa
5. Elroy PCI Bridge (13) at 0xfed3c000 [10/6], versions 0x782, 0x0, 0xa
6. Unknown machine (0) at 0xfffa0000 [32], versions 0x5dc, 0x0, 0x4
7. Memory (1) at 0xfed10200 [49], versions 0x9c, 0x0, 0x9
CPU(s): 1 x PA8600 (PCX-W+) at 750.000000 MHz
SBA found Astro 2.1 at 0xfed00000
lba version TR4.0 (0x5) found at 0xfed30000
lba version TR4.0 (0x5) found at 0xfed32000
lba version TR4.0 (0x5) found at 0xfed38000
lba version TR4.0 (0x5) found at 0x
iosapic: hpa not registered for PCI device 103c:1008 (Hewlett-Packard Company)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Enabled soft power switch (polling mode, io=0xf0400804).
SuperIO: Found NS87560 Legacy I/O device at 00:0e.1 (IRQ 64)
SuperIO: Serial port 1 at 0x3f8
SuperIO: Serial port 2 at 0x2f8
SuperIO: Parallel port at 0x378
SuperIO: Floppy controller at 0x3f0
SuperIO: ACPI at 0x7e0
SuperIO: USB reg
parport0: PC-style at 0x378, irq 101 [PCSPP(,...)]
Starting kswapd
Journalled Block Device driver loaded
PCI graphic ROM found at f7000000 (2048 kB), fb @ fa000000 (32 MB)
STI word mode ROM at f7000044, hpa=fa000000
STI word mode ROM, id 35acda30-9a02587, conforms to spec rev. 8.0d
STI device: A1299B
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at port 0x03f8 (irq = 99) is a 16550A
ttyS01 at port 0x02f8 (irq = 100) is a 16550A
lp0: using parport0 (interrupt-driven).
Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com)
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NS87415: IDE controller on PCI bus 00 dev 70
NS87415: chipset revision 3
NS87415: 100% native mode on irq 103
ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:p
ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio
hda: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0xf00-0xf07,0xe02 on irq 103
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
loop: loaded (max 8 devices)
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0: no phy info, aborting mtable build
tulip0: MII transceiver #1 config 1200 status 7809 advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0x1000, 00:30:6E:21:4B:D2, IRQ 66.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 15, function 0
sym53c8xx: 53c896 detected
sym53c8xx: at PCI bus 0, device 15, function 1
sym53c8xx: 53c896 detected
sym53c896-0: rev 0x7 on pci bus 0 device 15 function 0 irq 65
sym53c896-0: ID 7, Fast-20, Parity Checking
WARNING! Stack pointer and cr30 do not correspond!
Dumping virtual address stack instead
Dumping Stack from 0x203e8000 to 0x203e8b00:
8000 1cf21f4b 60933501 39928bc5 c150df50 7325178b 82a1bea1 e64a2f17 05437d43
8020 cce2eb7d 0af04fd4 99b363a9 15962afa 33107201 2b5ae0a6 66565151 56c3741enter command > sea
Searching for potential bo
8040 ccda17f1 adf05d6e 99b42fe3 5be0badd 331eea95 b7b7c0e8 663dd52b 6f6f81d1l minutes.
To discontinue search, press any k
8060 cc0d1f05 dea9b6f0 981a3e0b bd536de1 30347c17 7aa6dbc3 601e4d7d f53b02d4
Path Number Device Path
8080 c03c9afb ea7605a9 807935f7 d4ec0b53 00f26bef a9d816a7 01e4d7df 53b02d4f ----------- ----------------- -----------
80a0 03bf1aed a716efcc 077e35db 4e2ddf99 0e8adee5 9c2d0a60 1d15bdcb 385a14c1 HL-DT-ST GCE-8481B
80c0 3a5dcec5 70c29cd0 74cd28d9 e1f38cf2 e99a51b3 c3e719e5 d334a367 87ce33cb18406LC
80e0 a66946cf 0f9c6797 4ca438cd 1f4e7a7c 993ec4c9 3ee
8200 38d02703 3c1cffcd 71d6fb55 784f4ac8 e3db43f9 f0e820c2 c7b687f3 e1d04185
Available memory: 2147483648 bytes
8220 8f6d0fe7 c3a0830b 1eda1fcf 87410617 3db43f9f 0e820c2f 7b1eca6d 1d72ad0c 15732736 bytes
Prim
8240 f64b2189 3a93ef4a ece0f641 75516bc6 d9b759d1 ead462de b36eb3a3 d5a8c5bdot path: SCSI.6.0
Console path: S
8260 66dd6747 ab518b7b cdbace8f 56a316f7 9b03284d ad3098bc 3606509b 5a613179th: USB
----- Main Menu -----------------
8280 6c7a1465 b4b4d7a0 d8f428cb 6969af41 b19ee4c5 d2a5ebd0 633dc98b a54bd7a1
Command
82a0 c67b9317 4a97af43 8c81937d 9559ebd4 190326fb 2ab
-----
Main Menu: Enter command > bo id
83e0 d9ceaf65 82cccd20 b39d5ecb 05999a41 674c08c5 0b4581d0 ceeea4d9 16fdb6f2
Booting...
Boot IO Dependent Code (IODC) rev
8400 9dabfce1 2d8dd8b6 3b214c91 5b6d043e 76342c71 b6acbd2e ec6858e3 6d597a5dlo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002
8420 d8a60495 dac441e8 b14c092b b58883d1 62981257 6b1107a3 c54691fd d654ba140/vmlinux32 4250101 bytes @ 0x458800
8440 8a8d23fb aca97429 151a47f7 5952e853 2a423abd b2d365f4 5484757b 65a6cbe9
0/ramdisk 2656756 bytes @ 0xdac800
8460 a97e5fa5 cb3b2280 52fcbf4b 96764501 a5f97e97 2ceman
8560 c99f7ee9 fd53e01a 933efdd3 faa7c035 267dfba7 f54f806b 4cfbf74f ea9f00d7
This box can boot either 32 o
8580 99f7ee9f d53e01af 33efdd3f aa7c035f 67dfba7f 54f806bf cfc9c1ad a986b82c
32-bit kernelELF32 e
85a0 9f93835b 530d7059 3f51b3e5 a66c55e0 7ea367cb 4cd8abc1 fd307ac5 99c7e2d0
Segment 0 load 00100000 size 2359528 mediaptr
85c0 fa60f58b 338fc5a1 f4b75e45 67693e10 e91809d9 cea4c972 d23013b3 9d4992e542000 size 488912 mediaptr 0x242000
85e0 a4602767 3a9325cb 48b6fb9d 7550fec4 911b4269 ead748da 223684d3 d5ae91b5
Segment 3 load 003fc000 size 8192
8600 446d09a7 ab5d236b 88da134f 56ba46d7 11c293cd ad0238fc 2385279b 5a0471f9 4 load 00400000 size 32768 mediaptr 0x2fa000
8620 477cfa65 b47e56a0 8ef9f4cb 68fcad41 1d855cc5 d18264 mediapt
86a0 478145f1 eb440e6e 8f028be3 d6881cdd 1e0517c7 ad1039bb 3c0a2f8f 5a2073773.0.4) #1 Wed Oct 22 17:45:10
86c0 7862ea4d b43653bc f0c5d49b 686ca779 e1fd1c65 d0affba0 c3fa38cb a15ff741l 19
The 32-bit Kernel has started...
86e0 87f47197 42bfee83 0f9e567d 85096854 1f3cacfb 0a12d0a9 3e0feca5 14531400
model 00005dc0 00000481 00000000 00000002 776
8700 7c696c19 28d09d52 f8a46d61 51d78ff6 f13e6f91 a3d
8740 49b1bbe1 f040f036 936377c3 e081e06d 26c6ef87 c103c0db 4d8ddf0f 820781b7d: 4fd66000-4ffee9f4
initrd: reserving 3fd66000-3ff
8760 9b1bbe1f 040f036f 3641c96d 0868b38c 6cf52789 10a7d24a d99cfa41 213911c6
pagetable_init
On node 0 totalpages: 524288
8780 b34f41d1 420496de 66e836f1 847f98ee cdd06de3 08ff31dd 9bd66e95 1188d6e8
zone(2): 0 pages.
LCD display at f05d0008,f0
87a0 37da6879 23671882 6fc265a1 46b88456 dff27e11 8d07bdfe bfe4fc23 1a0f7bfdine: ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt102 pa
87c0 7fbf4d15 346842a8 ff082f79 68a63002 fe66eba1 d13ad556 fccdd743 a275aaadl=0/vmlinux
Console: colour dummy device 160x64
87e0 f99bae87 44eb555b f341e85d 89a01fe4 e683d0bb 13497.49 BogoMIP
-------
8900 d7762b37 6520e5f3 ae9ae33d ca377eb4 5d35c67b 946efd69 ba6b8cf7 28ddfad3
8920 74a1acbd 51cd40f4 e935ec29 a3ec34ba d26bd853 47d86975 a4a105f5 8fc667b8
--
8940 49420beb 1f8ccf71 92f2a285 3f6f2bb0 2593f059 7ea8e232 4b5155e1 fd277136
8960 96a2abc3 fa4ee26d 2d455787 f49dc4db 5a8aaf0f e93b89b7 b5155e1f d277136f36 kB
8980 6a2abc3f a4ee26df d455787f 49dc4dbf a8dc45ad 93ce2e2c 51b88b5b 279c5c59
Available memory: 2147483648 byte
89a0 a307a3e5 4f4e0de0 4679f299 9eeaae92 8cf3e533 3ddod memory required:
89a0 a307a3e5 4f4e0de0 4679f299 9eeaae92 8cf3e533 3ddod memory required:
8aa0 8736bfb7 37b59133 0e1bca3d 6f1d9734 1c412129 de4d9b3a 38824253 bc9b3675
8ac0 710484a7 79366ceb e27fbc1d f21a6c84 c4ff783b e434d909 89fef077 c869b213
8ae0 13fde0ef 90d36427 27fbc1df 21a6c84f 4f8136ed 433b25cc 9f74d889 8600feca
High Priority Machine Check (HPMC): Code=1 regs=102f3080 (Addr=00000000)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111101000001101 Not tainted
r00-03 00000000 00000000 1034bda0 000f4000
r04-07 12378350 00000010 12378000 00000000
r08-11 00000002 1237800c 12378050 10323010
r12-15 00000000 10376c08 102d2000 00000038
r16-19 0000000f 103234d4 10323010 000f423f
r20-23 0000000f f4005014 00000001 f4005000
r24-27 000f423f 000bb800 00000001 102f0010
r28-31 00000000 00001d4c 103e8b00 10201f40
sr0-3 00000000 00000000 00000000 00000000
sr4-7 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1034be68 1034be6c
IIR: 0ea00013 ISR: a607ffd0 IOR: 01405014
CPU: 0 CR30: 103e8000 CR31: 103a0000
ORIG_R28: 00000000
[-- Attachment #3: komunikat.txt --]
[-- Type: text/plain, Size: 8011 bytes --]
Firmware Version 1.6
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2000, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State I/D Cache
--------- -------- --------------------- ----------
0 750 MHz Active Functional 768 kB/1536 kB
Central Bus Speed: 120 MHz
Available memory: 2147483648 bytes
Good memory required: 15732736 bytes
Primary boot path: FWSCSI.6.0
Alternate boot path: SCSI.6.0
Console path: SERIAL_1.9600.8.none
Keyboard path: USB
----- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY [<path>]] Display or modify a path
SEArch [DIsplay|[[IPL] [<path>]]] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay th
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-----
Main Menu: Enter command > bo ide
Interact with IPL (Y, N, Q)?> y
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
palo ipl 1.0 root@palinux Mon Apr 1 10:02:53 MST 2002
Boot image contains:
0/vmlinux32 4250101 bytes @ 0x458800
0/vmlinux64 5527820 bytes @ 0x866800
0/ramdisk 2656756 bytes @ 0xdac800
Information: No console specified on kernel comman
PALO will choose the console currently used by firmware (serial).Current command
line:
0/vmlinux ramdisk_size=8192 root=/dev/ram initrd=0/ramdisk console=ttyS0 TERM=vt
102
0: 0/vmlinux
1: ramdisk_size=8192
2: root=/dev/ram
3: initrd=0/ramdisk
4: console=ttyS0
5: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? b
Command line for kernel: 'ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt1
02 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /ramdisk
Warning: kernel name doesn't end with 32 or 64 -- Guessing...
This box can boot either 32 or 64-bit kernels...Both kernels available, choosing
32-bit kernelELF32 executable
Entry 00100268 first 00100000 n 6
Segment 0 load 00100000 size 2359528 mediaptr 0x1000
Segment 1 load 00342000 size 488912 mediaptr 0x242000
Segment 2 load 003bc000 size 252764 mediaptr 0x2ba000
Segment 3 load 003fc000 size 8192 mediaptr 0x2f8000
Segment 4 load 00400000 size 32768 mediaptr 0x2fa000
Segment 5 load 0042ab70 size 121264 mediapt
Loading ramdisk 2656756 bytes @ 3fd66000...
Branching to kernel entry point 0x00100268. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 2.4.22-32 (root@k2000) (gcc version 3.0.4) #1 Wed Oct 22 17:45:10
CEST 2003
FP[0] enabled: Rev 1 Model 19
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005dc0 00000481 00000000 00000002 77634812 100000f0 00000008 000000b
0000b2
vers 00000203
CPUID vers 19 rev 7 (0x00000267)
capabilities 0x7
model 9000/785/C3700
Total Memory: 2048 Mb
initrd: 4fd66000-4ffee9f4
initrd: reserving 3fd66000-3ffee9f4 (mem_max 80000000)
pagetable_init
On node 0 totalpages: 524288
zone(0): 524288 pages.
zone(1): 0 pages.
zone(2): 0 pages.
LCD display at f05d0008,f05d0000 registered
Kernel command line: ramdisk_size=8192 root=/dev/ram console=ttyS0 TERM=vt102 pa
lo_kernel=0/vmlinux
Console: colour dummy device 160x64
Calibrating delay loop... 1497.49 BogoMIPS
Memory: 2066424k available
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Searching for devices...
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [parisc-linux] Linux on HP
2003-11-14 17:41 [parisc-linux] Linux on HP Damian Muchliński
@ 2003-11-14 18:11 ` Joel Soete
2003-11-14 18:28 ` Michael S.Zick
2003-11-15 3:16 ` Michael S.Zick
` (2 subsequent siblings)
3 siblings, 1 reply; 14+ messages in thread
From: Joel Soete @ 2003-11-14 18:11 UTC (permalink / raw)
To: Damian Muchliński; +Cc: parisc-linux
Hi Damian,
Can you give more detail on the model of your "HP computer".
I encounter a similar problem with a b2000 because of a pb between pdc
console support and Suckio driver for the ide-cdrom.
I was too lasy to learn how to build a custom net-iso cd, so I copy a
system disk (installed on a b180) on an external disk. Then i boot the
b2k with this disk plug in an additional scsi controler, to finaly copy
its contain on the internal disk (and when the disk went down, I just
follow the same procedure :) ).
hth,
Joel
Damian Muchliński wrote:
> Hello
>
> I'm trying to set-up linux on HP computer. First I've tried Debian Stable
> Woody relase with 2.4.17 kernel but i got message WARNING! Stack pointer
> and cr30 do not correspond! I've found on newsgroup that because of old
> version of gcc and kernel and I should use newer version. So I have
> downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
> website,check md5, burned and booted.
> Unfortunately it hangs on "searching for devices" without any more info.
> I would be very gratefull if you could help me solve this problem. Maybe
> somemone else had similar problem.
>
> I've attached files with bugreport.
>
>
> Thanks for any suggestions, waiting for reply from you.
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [parisc-linux] Linux on HP
2003-11-14 18:11 ` Joel Soete
@ 2003-11-14 18:28 ` Michael S.Zick
2003-11-14 19:52 ` Joel Soete
0 siblings, 1 reply; 14+ messages in thread
From: Michael S.Zick @ 2003-11-14 18:28 UTC (permalink / raw)
To: parisc-linux
On Friday 14 November 2003 12:11 pm, Joel Soete wrote:
> Hi Damian,
>
> Can you give more detail on the model of your "HP computer".
>
Joel
I found this in one of his attachments...
Linux version 2.4.17-32 (root@paer) (gcc version 3.0.4) \
#1 Sat Mar 16 17:09:00 MST 2002
FP[0] enabled: Rev 1 Model 19
The 32-bit Kernel has started...
Determining PDC firmware type: System Map.
model 00005dc0 00000481 00000000 00000002 77634812 \
100000f0 00000008 000000b2 000000b2
vers 00000203
CPUID vers 19 rev 7 (0x00000267)
model 9000/785/C3700
Total Memory: 2048 Mb
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [parisc-linux] Linux on HP
2003-11-14 17:41 [parisc-linux] Linux on HP Damian Muchliński
2003-11-14 18:11 ` Joel Soete
@ 2003-11-15 3:16 ` Michael S.Zick
2003-11-15 3:36 ` Matthew Wilcox
2003-11-16 1:38 ` Grant Grundler
2003-11-16 5:50 ` Grant Grundler
3 siblings, 1 reply; 14+ messages in thread
From: Michael S.Zick @ 2003-11-15 3:16 UTC (permalink / raw)
To: parisc-linux
On Friday 14 November 2003 11:41 am, Damian Muchli?ski wrote:
> Hello
>
> I'm trying to set-up linux on HP computer. First I've tried Debian Stable
> Woody relase with 2.4.17 kernel but i got message WARNING! Stack pointer
> and cr30 do not correspond! I've found on newsgroup that because of old
> version of gcc and kernel and I should use newer version. So I have
> downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
> website,check md5, burned and booted.
> Unfortunately it hangs on "searching for devices" without any more info.
>
You might try letting it set at that point for a good while, like go out to
lunch.
There was (perhaps still is) a problem on some machines where the
device search took approximately forever.
Mike
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [parisc-linux] Linux on HP
2003-11-15 3:16 ` Michael S.Zick
@ 2003-11-15 3:36 ` Matthew Wilcox
0 siblings, 0 replies; 14+ messages in thread
From: Matthew Wilcox @ 2003-11-15 3:36 UTC (permalink / raw)
To: Michael S. Zick; +Cc: parisc-linux
On Fri, Nov 14, 2003 at 09:16:51PM -0600, Michael S. Zick wrote:
> You might try letting it set at that point for a good while, like go out to
> lunch.
> There was (perhaps still is) a problem on some machines where the
> device search took approximately forever.
That was on CCIO-based machines (ie C100 to J2240). It's fixed now.
--
"It's not Hollywood. War is real, war is primarily not about defeat or
victory, it is about death. I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [parisc-linux] Linux on HP
2003-11-14 17:41 [parisc-linux] Linux on HP Damian Muchliński
2003-11-14 18:11 ` Joel Soete
2003-11-15 3:16 ` Michael S.Zick
@ 2003-11-16 1:38 ` Grant Grundler
2003-11-16 17:13 ` Joel Soete
2003-11-16 5:50 ` Grant Grundler
3 siblings, 1 reply; 14+ messages in thread
From: Grant Grundler @ 2003-11-16 1:38 UTC (permalink / raw)
To: Damian Muchli?ski; +Cc: parisc-linux
On Fri, Nov 14, 2003 at 06:41:25PM +0100, Damian Muchli?ski wrote:
> I've found on newsgroup that because of old
> version of gcc and kernel and I should use newer version. So I have
> downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
> website,check md5, burned and booted.
> Unfortunately it hangs on "searching for devices" without any more info.
Damian,
I'm surprised the 2.4.22 netinst.iso doesn't boot on your c3700.
I'm currently running 2.4.22-pa14 on a C3600 with STIFB console.
The output you posted started with 2.4.17 boot and then garbled
at the end. I don't understand how HPMC dump messages and what looks
like PDC output (eg "To discontinue search,...") got mixed up.
If you can netboot a 2.4.22 kernel image from:
ftp://ftp.parisc-linux.org/kernels/c3000/
and point the "root=" at the CDROM install disk, I would expect
it to complete the install....but that's non-trivial to setup
and it's alot to ask for. If you don't have time or it's too
complicated, don't worry about it.
I'll try to netboot the netinst.iso that you used at home on a C3000
and see what happens.
thanks,
grant
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [parisc-linux] Linux on HP
2003-11-16 1:38 ` Grant Grundler
@ 2003-11-16 17:13 ` Joel Soete
2003-11-17 0:34 ` Grant Grundler
0 siblings, 1 reply; 14+ messages in thread
From: Joel Soete @ 2003-11-16 17:13 UTC (permalink / raw)
To: Grant Grundler; +Cc: Damian Muchli?ski, parisc-linux
Grant,
Grant Grundler wrote:
> On Fri, Nov 14, 2003 at 06:41:25PM +0100, Damian Muchli?ski wrote:
>
>>I've found on newsgroup that because of old
>>version of gcc and kernel and I should use newer version. So I have
>>downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
>>website,check md5, burned and booted.
>>Unfortunately it hangs on "searching for devices" without any more info.
>
>
> Damian,
> I'm surprised the 2.4.22 netinst.iso doesn't boot on your c3700.
> I'm currently running 2.4.22-pa14 on a C3600 with STIFB console.
>
Not me, it is the same pb on my b2k:
(see logs in the src thread)
"[...]
NS87415: IDE controller on PCI bus 00 dev 70
NS87415: chipset revision 3
NS87415: 100% native mode on irq 103
ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio
hda: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
ide0 at 0xf00-0xf07,0xe02 on
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
[...]"
The question is: is it enough to unplug the ide cable of this ide cdrom
to make it works?
btw can you have a look in your dmesg to see if you also encounter
NS87415's messages?
> The output you posted started with 2.4.17 boot and then garbled
> at the end. I don't understand how HPMC dump messages and what looks
> like PDC output (eg "To discontinue search,...") got mixed up.
>
> If you can netboot a 2.4.22 kernel image from:
> ftp://ftp.parisc-linux.org/kernels/c3000/
>
> and point the "root=" at the CDROM install disk, I would expect
> it to complete the install....but that's non-trivial to setup
> and it's alot to ask for. If you don't have time or it's too
> complicated, don't worry about it.
>
> I'll try to netboot the netinst.iso that you used at home on a C3000
> and see what happens.
>
Sorry, I reported this pb a long time ago but between too much test
about too many things, i miss to trace back this pb (more over iirc
Matthew mentioned that this Suckio controler could be bugy?).
hth,
Joel
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [parisc-linux] Linux on HP
2003-11-16 17:13 ` Joel Soete
@ 2003-11-17 0:34 ` Grant Grundler
2003-11-17 7:36 ` Joel Soete
0 siblings, 1 reply; 14+ messages in thread
From: Grant Grundler @ 2003-11-17 0:34 UTC (permalink / raw)
To: Joel Soete; +Cc: Damian Muchli?ski, parisc-linux
On Sun, Nov 16, 2003 at 05:13:22PM +0000, Joel Soete wrote:
> Not me, it is the same pb on my b2k:
> (see logs in the src thread)
> "[...]
> NS87415: IDE controller on PCI bus 00 dev 70
> NS87415: chipset revision 3
> NS87415: 100% native mode on irq 103
> ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio
> hda: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
> ide0 at 0xf00-0xf07,0xe02 on
> hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
> [...]"
>
> The question is: is it enough to unplug the ide cable of this ide cdrom
> to make it works?
It might if the IDE is causing problems.
is NS87415 code causing problems?
> btw can you have a look in your dmesg to see if you also encounter
> NS87415's messages?
NS87415 is the IDE controller on the c3xxx motherboard.
Disconnecting the cable will only make the CD-ROM drive inaccessible.
Suckyio provides NS87415-like functionality and is quite buggy.
grant
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [parisc-linux] Linux on HP
2003-11-17 0:34 ` Grant Grundler
@ 2003-11-17 7:36 ` Joel Soete
0 siblings, 0 replies; 14+ messages in thread
From: Joel Soete @ 2003-11-17 7:36 UTC (permalink / raw)
To: Grant Grundler; +Cc: Damian Muchli?ski, parisc-linux
Hi Grant,
>>-- Original Message --
>>Date: Sun, 16 Nov 2003 17:34:16 -0700
>>From: Grant Grundler <grundler@parisc-linux.org>
>>To: Joel Soete <soete.joel@tiscali.be>
>>Cc: Damian Muchli?ski <mudamian@poczta.onet.pl>,
>> parisc-linux@lists.parisc-linux.org
>>Subject: Re: [parisc-linux] Linux on HP
>>
>>
>>On Sun, Nov 16, 2003 at 05:13:22PM +0000, Joel Soete wrote:
>> Not me, it is the same pb on my b2k:
>> (see logs in the src thread)
>> "[...]
>> NS87415: IDE controller on PCI bus 00 dev 70
>> NS87415: chipset revision 3
>> NS87415: 100% native mode on irq 103
>> ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:pio
>> ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio
>> hda: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
>> ide0 at 0xf00-0xf07,0xe02 on
>> hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
>> [...]"
>>
>> The question is: is it enough to unplug the ide cable of this ide cdrom
>> to make it works?
>
>It might if the IDE is causing problems.
>is NS87415 code causing problems?
>
>> btw can you have a look in
>>your dmesg to see if you also encounter
>> NS87415's messages?
>
>NS87415 is the IDE controller on the c3xxx motherboard.
>Disconnecting the cable will only make the CD-ROM drive inaccessible.
>Suckyio provides NS87415-like functionality and is quite buggy.
So according to your test, it is well the access to ide cd-rom which cause
the hang of the boot.
Thanks,
Joel
-------------------------------------------------------------------------
Tiscali ADSL: 3 mois GRATUITS! L'Internet rapide, c'est pour tout le monde.
http://reg.tiscali.be/default.asp?lg=fr
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [parisc-linux] Linux on HP
2003-11-14 17:41 [parisc-linux] Linux on HP Damian Muchliński
` (2 preceding siblings ...)
2003-11-16 1:38 ` Grant Grundler
@ 2003-11-16 5:50 ` Grant Grundler
2003-11-16 12:16 ` Thibaut VARENE
3 siblings, 1 reply; 14+ messages in thread
From: Grant Grundler @ 2003-11-16 5:50 UTC (permalink / raw)
To: Damian Muchli?ski; +Cc: parisc-linux
On Fri, Nov 14, 2003 at 06:41:25PM +0100, Damian Muchli?ski wrote:
> So I have downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
> website,check md5, burned and booted.
> Unfortunately it hangs on "searching for devices" without any more info.
I don't know how to extract the vmlinux from the -pa13 netinst.iso.
But I could grab the 2.4.22 kernel+modules which are installed.
It boots fine on my c3k via gfx console (using PCI Viz-EG card).
(uname -a give "2.4.22-32 #1" and Oct 22, 2003 time stamp)
Thibaut, the kernel used to boot the netinst.iso is the identical
one that gets install by the netinst.iso?
Damian, perhaps you have additional/different PCI cards that are
causing problems?
Can you send output from "in io"?
Type "in io" while at the "Main Menu: Enter command" firmware prompt.
hth,
grant
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [parisc-linux] Linux on HP
2003-11-16 5:50 ` Grant Grundler
@ 2003-11-16 12:16 ` Thibaut VARENE
0 siblings, 0 replies; 14+ messages in thread
From: Thibaut VARENE @ 2003-11-16 12:16 UTC (permalink / raw)
To: Grant Grundler; +Cc: Damian Muchli?ski, parisc-linux
On Sat, 15 Nov 2003 22:50:22 -0700
Grant Grundler <grundler@parisc-linux.org> wrote:
> On Fri, Nov 14, 2003 at 06:41:25PM +0100, Damian Muchli?ski wrote:
> > So I have downloaded palinux-2.4.22-pa13-20031022-netinst.iso from
> > your website,check md5, burned and booted.
> > Unfortunately it hangs on "searching for devices" without any more
> > info.
>
> I don't know how to extract the vmlinux from the -pa13 netinst.iso.
> But I could grab the 2.4.22 kernel+modules which are installed.
> It boots fine on my c3k via gfx console (using PCI Viz-EG card).
> (uname -a give "2.4.22-32 #1" and Oct 22, 2003 time stamp)
>
> Thibaut, the kernel used to boot the netinst.iso is the identical
> one that gets install by the netinst.iso?
Yes.
Thibaut VARENE
The PA/Linux ESIEE Team
http://pateam.esiee.fr/
^ permalink raw reply [flat|nested] 14+ messages in thread
* [parisc-linux] Linux on HP
@ 2000-12-11 20:45 jcarlson
2000-12-12 7:47 ` Matt Taggart
0 siblings, 1 reply; 14+ messages in thread
From: jcarlson @ 2000-12-11 20:45 UTC (permalink / raw)
To: parisc-linux
Recently I've been assigned the task of setting up a few old HP machines
for paralell processing tasks. In doing so, I have come upon your project
in porting linux to HP machines.
I was curious as to the status of a few of the projects as well as the
availability of possible binary distributions.
I'm curious about the status of Merlin 160, Raven 120 T' and Gecko.
Any information you could give me would be most helpful.
Thank you,
- Josiah Carlson
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [parisc-linux] Linux on HP
2000-12-11 20:45 jcarlson
@ 2000-12-12 7:47 ` Matt Taggart
0 siblings, 0 replies; 14+ messages in thread
From: Matt Taggart @ 2000-12-12 7:47 UTC (permalink / raw)
To: jcarlson; +Cc: parisc-linux
jcarlson@macalester.edu writes...
> Recently I've been assigned the task of setting up a few old HP machines
> for paralell processing tasks. In doing so, I have come upon your project
> in porting linux to HP machines.
> I was curious as to the status of a few of the projects
We're making good progress but the port is still in an alpha stage.
Performance is pretty poor but improving. Depending on what your "parallel
processing tasks" are you may want to wait to start playing. If you have some
time and don't mind hacking (it's fun!) then you might consider giving it a
try.
> as well as the
> availability of possible binary distributions.
Both Debian and RedHat are working on unofficial/experimental distributions.
Both have hundreds of packages built for hppa.
> I'm curious about the status of Merlin 160, Raven 120 T' and Gecko.
Most of the core developers have both a B160/B180/A180 and some sort of 712 so
they mostly work. I don't know the current status of the C110 but I think it
works. You might consider looking at and adding your machines to the Hardware
Database at,
http://parisc-linux.org/hw.html
--
Matt Taggart
taggart@fc.hp.com
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2003-11-17 7:36 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-11-14 17:41 [parisc-linux] Linux on HP Damian Muchliński
2003-11-14 18:11 ` Joel Soete
2003-11-14 18:28 ` Michael S.Zick
2003-11-14 19:52 ` Joel Soete
2003-11-15 3:16 ` Michael S.Zick
2003-11-15 3:36 ` Matthew Wilcox
2003-11-16 1:38 ` Grant Grundler
2003-11-16 17:13 ` Joel Soete
2003-11-17 0:34 ` Grant Grundler
2003-11-17 7:36 ` Joel Soete
2003-11-16 5:50 ` Grant Grundler
2003-11-16 12:16 ` Thibaut VARENE
-- strict thread matches above, loose matches on Subject: below --
2000-12-11 20:45 jcarlson
2000-12-12 7:47 ` Matt Taggart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.