From: kgene@kernel.org
To: 'Bartlomiej Zolnierkiewicz' <b.zolnierkie@samsung.com>
Cc: 'Daniel Lezcano' <daniel.lezcano@linaro.org>,
'Sachin Kamat' <sachin.kamat@linaro.org>,
'Viresh Kumar' <viresh.kumar@linaro.org>,
"'Rafael J. Wysocki'" <rjw@rjwysocki.net>,
'Kyungmin Park' <kyungmin.park@samsung.com>,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, linaro-kernel@lists.linaro.org
Subject: RE: [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled
Date: Tue, 09 Sep 2014 12:34:21 +0900 [thread overview]
Message-ID: <034a01cfcbde$f1a98270$d4fc8750$@kernel.org> (raw)
In-Reply-To: <1409925088-4705-1-git-send-email-b.zolnierkie@samsung.com>
Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
Hi,
> This patch series adds support for AFTR idle mode on boards with
> secure firmware enabled and allows EXYNOS cpuidle driver usage on
> Exynos4x12 SoCs.
>
> It has been tested on Trats2 board (using Exynos4412 SoC with secure
> firmware enabled) on which AFTR mode reduces power consumption by ~12%
Nice.
> when EXYNOS cpuidle driver is enabled (in both cases the default
> exynos_defconfig config is used and CPU1-3 are offlined).
>
> Currently Exynos4412 SoC support is limited to Trats2 board.
>
> Depends on:
> - next-20140904 branch of linux-next kernel tree
> - "irqchip: Properly fetch the per cpu offset" patch
> (https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg716674.html)
> - [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
> (https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35921.html)
>
OK this series looks good to me, I will take this series once above patches are
landed.
Thanks,
Kukjin
> Changes since v5:
> - rebased on top of next-20140904 +
> "irqchip: Properly fetch the per cpu offset" patch
> (https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg716674.html)
> [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
> (https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35921.html)
> - limit Exynos4412 SoC support to Trats2 board for now
>
> Changes since v4:
> - rebased on top of next-20140804 +
> [PATCH v5][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35262.html)
> [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg34282.html)
> - call exynos_save_cp15() only on A9 type core (this is needed for the future
> Exynos3250 SoC support)
>
> Changes since v3:
> - rebased on top of next-20140804 +
> [PATCH v4][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35192.html)
> [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg34282.html)
> - (re-)added patch fixing S5P_CENTRAL_SEQ_OPTION register setup
>
> Changes since v2:
> - rebased on top of next-20140708 +
> [PATCH 5/6] ARM: EXYNOS: Fix suspend/resume sequencies
> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg32809.html)
> [with rejects fixed]
> [PATCH 6/6] ARM: EXYNOS: Register cpuidle device only on Exynos4210 and 5250
> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg32808.html)
> [PATCH 0/2] Firmware-assisted suspend/resume of Exynos SoCs
> (http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg32991.html)
> [with rejects fixed in patch #2]
> - addressed review comments from Tomasz Figa and Daniel Lezcano
>
> Changes since v1:
> - synced against next-20140602
> - added missing Acked-by-s
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (5):
> ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines
> ARM: EXYNOS: add AFTR mode support to firmware do_idle method
> ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code
> ARM: EXYNOS: PM: fix register setup for AFTR mode code
> ARM: EXYNOS: cpuidle: allow driver usage on Exynos4x12 SoCs
>
> arch/arm/include/asm/firmware.h | 2 +-
> arch/arm/mach-exynos/common.h | 5 ++++
> arch/arm/mach-exynos/exynos.c | 5 +++-
> arch/arm/mach-exynos/firmware.c | 34 ++++++++++++++++-------
> arch/arm/mach-exynos/pm.c | 60 ++++++++++++++++++++++++-----------------
> 5 files changed, 71 insertions(+), 35 deletions(-)
>
> --
> 1.8.2.3
WARNING: multiple messages have this Message-ID (diff)
From: kgene@kernel.org (kgene at kernel.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled
Date: Tue, 09 Sep 2014 12:34:21 +0900 [thread overview]
Message-ID: <034a01cfcbde$f1a98270$d4fc8750$@kernel.org> (raw)
In-Reply-To: <1409925088-4705-1-git-send-email-b.zolnierkie@samsung.com>
Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
Hi,
> This patch series adds support for AFTR idle mode on boards with
> secure firmware enabled and allows EXYNOS cpuidle driver usage on
> Exynos4x12 SoCs.
>
> It has been tested on Trats2 board (using Exynos4412 SoC with secure
> firmware enabled) on which AFTR mode reduces power consumption by ~12%
Nice.
> when EXYNOS cpuidle driver is enabled (in both cases the default
> exynos_defconfig config is used and CPU1-3 are offlined).
>
> Currently Exynos4412 SoC support is limited to Trats2 board.
>
> Depends on:
> - next-20140904 branch of linux-next kernel tree
> - "irqchip: Properly fetch the per cpu offset" patch
> (https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg716674.html)
> - [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
> (https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35921.html)
>
OK this series looks good to me, I will take this series once above patches are
landed.
Thanks,
Kukjin
> Changes since v5:
> - rebased on top of next-20140904 +
> "irqchip: Properly fetch the per cpu offset" patch
> (https://www.mail-archive.com/linux-kernel at vger.kernel.org/msg716674.html)
> [PATCH v3 0/5] Firmware-assisted suspend/resume of Exynos SoCs
> (https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35921.html)
> - limit Exynos4412 SoC support to Trats2 board for now
>
> Changes since v4:
> - rebased on top of next-20140804 +
> [PATCH v5][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
> (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35262.html)
> [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
> (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34282.html)
> - call exynos_save_cp15() only on A9 type core (this is needed for the future
> Exynos3250 SoC support)
>
> Changes since v3:
> - rebased on top of next-20140804 +
> [PATCH v4][next-20140804] ARM: EXYNOS: Fix suspend/resume sequences
> (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg35192.html)
> [PATCH v2 0/2] Firmware-assisted suspend/resume of Exynos SoCs
> (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34282.html)
> - (re-)added patch fixing S5P_CENTRAL_SEQ_OPTION register setup
>
> Changes since v2:
> - rebased on top of next-20140708 +
> [PATCH 5/6] ARM: EXYNOS: Fix suspend/resume sequencies
> (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32809.html)
> [with rejects fixed]
> [PATCH 6/6] ARM: EXYNOS: Register cpuidle device only on Exynos4210 and 5250
> (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32808.html)
> [PATCH 0/2] Firmware-assisted suspend/resume of Exynos SoCs
> (http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg32991.html)
> [with rejects fixed in patch #2]
> - addressed review comments from Tomasz Figa and Daniel Lezcano
>
> Changes since v1:
> - synced against next-20140602
> - added missing Acked-by-s
>
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>
>
> Bartlomiej Zolnierkiewicz (5):
> ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines
> ARM: EXYNOS: add AFTR mode support to firmware do_idle method
> ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code
> ARM: EXYNOS: PM: fix register setup for AFTR mode code
> ARM: EXYNOS: cpuidle: allow driver usage on Exynos4x12 SoCs
>
> arch/arm/include/asm/firmware.h | 2 +-
> arch/arm/mach-exynos/common.h | 5 ++++
> arch/arm/mach-exynos/exynos.c | 5 +++-
> arch/arm/mach-exynos/firmware.c | 34 ++++++++++++++++-------
> arch/arm/mach-exynos/pm.c | 60 ++++++++++++++++++++++++-----------------
> 5 files changed, 71 insertions(+), 35 deletions(-)
>
> --
> 1.8.2.3
next prev parent reply other threads:[~2014-09-09 3:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 13:51 [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 1/5] ARM: EXYNOS: PM: replace EXYNOS_BOOT_VECTOR_* macros by static inlines Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 2/5] ARM: EXYNOS: add AFTR mode support to firmware do_idle method Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 3/5] ARM: EXYNOS: cpuidle: add secure firmware support to AFTR mode code Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 4/5] ARM: EXYNOS: PM: fix register setup for " Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` [PATCH v6 5/5] ARM: EXYNOS: cpuidle: allow driver usage on Exynos4x12 SoCs Bartlomiej Zolnierkiewicz
2014-09-05 13:51 ` Bartlomiej Zolnierkiewicz
2014-09-09 3:34 ` kgene [this message]
2014-09-09 3:34 ` [PATCH v6 0/5] ARM: EXYNOS: cpuidle: fix AFTR mode on boards with secure firmware enabled kgene at kernel.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='034a01cfcbde$f1a98270$d4fc8750$@kernel.org' \
--to=kgene@kernel.org \
--cc=b.zolnierkie@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=kyungmin.park@samsung.com \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=sachin.kamat@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.