Anyone get the TI/PowerVR stuff working?

Anyone get the TI/PowerVR stuff working?

[david.hagood]

Does anyone on the list have any experience getting the (unfortunately
proprietary) PowerVR drivers for the OMAP3 working under Linux and X?

I've registered with TI, and downloaded the SDKs for the ZOOM and SDP
boards, and cannot work out how to integrate them into what I've built on
my prototype.

Also, I'm trying to get the DSP bridge stuff working.

Any good advice would be appreciated.

Re: Anyone get the TI/PowerVR stuff working?

[Koen Kooi]

[-- Attachment #1: Type: text/plain, Size: 859 bytes --]


Op 3 feb 2009, om 20:45 heeft david.hagood@gmail.com het volgende  
geschreven:

> Does anyone on the list have any experience getting the (unfortunately
> proprietary) PowerVR drivers for the OMAP3 working under Linux and X?

Yes: http://www.youtube.com/watch?v=3ToYOgP9f9U&feature=channel_page

The samurai and proxycon are FB demos, but clutter works with X11  
(Xorg, not Xsgx).

> I've registered with TI, and downloaded the SDKs for the ZOOM and SDP
> boards, and cannot work out how to integrate them into what I've  
> built on
> my prototype.

I have the 1.3.1397 GPLv2 kernel drivers working (http://www.bat.org/~tomba/git/omap3-sgx.git/ 
) working with the yet-to-be-released 1.3.1397 userspace and Tomi's  
DSS2 patches. The release is scheduled to be 'soon', but I've heard  
rumours that WTBU customers can download it already.

regards,

Koen

[-- Attachment #2: Dit deel van het bericht is digitaal ondertekend --]
[-- Type: application/pgp-signature, Size: 186 bytes --]

RE: Anyone get the TI/PowerVR stuff working?

[TK, Pratheesh Gangadhar]

-----Original Message-----
From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-owner@vger.kernel.org] On Behalf Of Koen Kooi
Sent: Wednesday, February 04, 2009 1:50 AM
To: linux-omap@vger.kernel.org List
Subject: Re: Anyone get the TI/PowerVR stuff working?

I have the 1.3.1397 GPLv2 kernel drivers working (http://www.bat.org/~tomba/git/omap3-sgx.git/ 
) working with the yet-to-be-released 1.3.1397 userspace and Tomi's  
DSS2 patches. The release is scheduled to be 'soon', but I've heard  
rumours that WTBU customers can download it already.

> When I tried last using DSS2, I was getting "no flipping error" and flickery output. Is there a fix for this ?

Regards,
Pratheeh