From: "Svetoslav Neykov" <svetoslav@neykov.name>
To: "'Alexander Shishkin'" <alexander.shishkin@linux.intel.com>,
"'Ralf Baechle'" <ralf@linux-mips.org>,
"'Greg Kroah-Hartman'" <gregkh@linuxfoundation.org>,
"'Gabor Juhos'" <juhosg@openwrt.org>,
"'John Crispin'" <blogic@openwrt.org>,
"'Alan Stern'" <stern@rowland.harvard.edu>,
"'Luis R. Rodriguez'" <mcgrof@qca.qualcomm.com>
Cc: <linux-mips@linux-mips.org>, <linux-usb@vger.kernel.org>
Subject: RE: [PATCH 0/5] Chipidea driver support for the AR933x platform
Date: Tue, 26 Feb 2013 16:38:53 +0200 [thread overview]
Message-ID: <078801ce142f$0108dea0$031a9be0$@neykov.name> (raw)
In-Reply-To: <87k3pvxkn8.fsf@ashishki-desk.ger.corp.intel.com>
Hi Alex,
I am working on the incorporating all received comments - thanks to all for
taking their time to comment.
Apologies for not replying to the received mails, didn't want to spam with
OK replies to each separately.
Regards,
Svetoslav.
-----Original Message-----
From: Alexander Shishkin [mailto:alexander.shishkin@linux.intel.com]
Sent: Tuesday, February 26, 2013 3:36 PM
To: Svetoslav Neykov; Ralf Baechle; Greg Kroah-Hartman; Gabor Juhos; John
Crispin; Alan Stern; Luis R. Rodriguez
Cc: linux-mips@linux-mips.org; linux-usb@vger.kernel.org; Svetoslav Neykov
Subject: Re: [PATCH 0/5] Chipidea driver support for the AR933x platform
Svetoslav Neykov <svetoslav@neykov.name> writes:
> Add support for the usb controller in AR933x platform.
> The processor is big-endian so all multi-byte values of the usb
> descriptors must be converted explicitly. Another difference is that
> the controller supports both host and device modes but not OTG.
> The patches are tested on WR703n router running OpenWRT trunk.
Svetoslav, are you working on these or do you have time to address the
issues raised in review?
Thanks,
--
Alex
WARNING: multiple messages have this Message-ID (diff)
From: "Svetoslav Neykov" <svetoslav@neykov.name>
To: 'Alexander Shishkin' <alexander.shishkin@linux.intel.com>,
'Ralf Baechle' <ralf@linux-mips.org>,
'Greg Kroah-Hartman' <gregkh@linuxfoundation.org>,
'Gabor Juhos' <juhosg@openwrt.org>,
'John Crispin' <blogic@openwrt.org>,
'Alan Stern' <stern@rowland.harvard.edu>,
"'Luis R. Rodriguez'" <mcgrof@qca.qualcomm.com>
Cc: linux-mips@linux-mips.org, linux-usb@vger.kernel.org
Subject: RE: [PATCH 0/5] Chipidea driver support for the AR933x platform
Date: Tue, 26 Feb 2013 16:38:53 +0200 [thread overview]
Message-ID: <078801ce142f$0108dea0$031a9be0$@neykov.name> (raw)
Message-ID: <20130226143853.RVCZ1EuLKh1J8dV52c0ov1xIrqx-at6bAUh4cekaFag@z> (raw)
In-Reply-To: <87k3pvxkn8.fsf@ashishki-desk.ger.corp.intel.com>
Hi Alex,
I am working on the incorporating all received comments - thanks to all for
taking their time to comment.
Apologies for not replying to the received mails, didn't want to spam with
OK replies to each separately.
Regards,
Svetoslav.
-----Original Message-----
From: Alexander Shishkin [mailto:alexander.shishkin@linux.intel.com]
Sent: Tuesday, February 26, 2013 3:36 PM
To: Svetoslav Neykov; Ralf Baechle; Greg Kroah-Hartman; Gabor Juhos; John
Crispin; Alan Stern; Luis R. Rodriguez
Cc: linux-mips@linux-mips.org; linux-usb@vger.kernel.org; Svetoslav Neykov
Subject: Re: [PATCH 0/5] Chipidea driver support for the AR933x platform
Svetoslav Neykov <svetoslav@neykov.name> writes:
> Add support for the usb controller in AR933x platform.
> The processor is big-endian so all multi-byte values of the usb
> descriptors must be converted explicitly. Another difference is that
> the controller supports both host and device modes but not OTG.
> The patches are tested on WR703n router running OpenWRT trunk.
Svetoslav, are you working on these or do you have time to address the
issues raised in review?
Thanks,
--
Alex
next prev parent reply other threads:[~2013-02-26 14:39 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-13 21:38 [PATCH 0/5] Chipidea driver support for the AR933x platform Svetoslav Neykov
2013-02-13 21:38 ` [PATCH 1/5] usb: chipidea: big-endian support Svetoslav Neykov
2013-02-13 21:38 ` [PATCH 2/5] usb: chipidea: flags to force usb mode (host/device) Svetoslav Neykov
2013-02-14 9:01 ` Michael Grzeschik
2013-02-13 21:38 ` [PATCH 3/5] usb: chipidea: Don't access OTG related registers Svetoslav Neykov
2013-02-14 11:45 ` Alexander Shishkin
2013-02-14 11:45 ` Alexander Shishkin
2013-02-13 21:38 ` [PATCH 4/5] usb: chipidea: AR933x platform support for the chipidea driver Svetoslav Neykov
2013-02-14 11:23 ` Alexander Shishkin
2013-02-14 11:23 ` Alexander Shishkin
2013-02-14 14:19 ` Gabor Juhos
2013-02-13 21:38 ` [PATCH 5/5] usb: chipidea: Fix incorrect check of function return value Svetoslav Neykov
2013-02-14 11:08 ` Alexander Shishkin
2013-02-14 11:08 ` Alexander Shishkin
2013-02-26 13:35 ` [PATCH 0/5] Chipidea driver support for the AR933x platform Alexander Shishkin
2013-02-26 13:35 ` Alexander Shishkin
2013-02-26 14:38 ` Svetoslav Neykov [this message]
2013-02-26 14:38 ` Svetoslav Neykov
2013-02-26 14:47 ` Alexander Shishkin
2013-02-26 14:54 ` Svetoslav Neykov
2013-02-26 14:54 ` Svetoslav Neykov
2013-02-26 15:45 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='078801ce142f$0108dea0$031a9be0$@neykov.name' \
--to=svetoslav@neykov.name \
--cc=alexander.shishkin@linux.intel.com \
--cc=blogic@openwrt.org \
--cc=gregkh@linuxfoundation.org \
--cc=juhosg@openwrt.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-usb@vger.kernel.org \
--cc=mcgrof@qca.qualcomm.com \
--cc=ralf@linux-mips.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.