From: Kukjin Kim <kgene.kim@samsung.com>
To: "'Andreas Färber'" <afaerber@suse.de>, linux-samsung-soc@vger.kernel.org
Cc: 'Stephan van Schaik' <stephan@synkhronix.com>,
'Vincent Palatin' <vpalatin@chromium.org>,
'Doug Anderson' <dianders@chromium.org>,
'Ben Dooks' <ben-linux@fluff.org>,
'Rob Herring' <robh+dt@kernel.org>,
'Pawel Moll' <pawel.moll@arm.com>,
'Mark Rutland' <mark.rutland@arm.com>,
'Ian Campbell' <ijc+devicetree@hellion.org.uk>,
'Kumar Gala' <galak@codeaurora.org>,
'Russell King' <linux@arm.linux.org.uk>,
"'moderated list:ARM/SAMSUNG ARM A...'"
<linux-arm-kernel@lists.infradead.org>,
"'open list:OPEN FIRMWARE AND...'" <devicetree@vger.kernel.org>,
'open list' <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH v2 1/4] ARM: dts: exynos5250: max77686 is Snow only
Date: Fri, 25 Jul 2014 14:28:02 +0900 [thread overview]
Message-ID: <08fe01cfa7c9$341cc700$9c565500$@samsung.com> (raw)
In-Reply-To: <1405704009-8430-2-git-send-email-afaerber@suse.de>
Andreas Färber wrote:
>
> Move it from exynos5250-cros-common.dtsi to exynos5250-snow.dts.
> Spring does not need it, it uses an s5m8767 instead.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
Hi Andreas,
I think this should be reviewed by chrome guys.
Doug, can you have a look this series for exynos5250-chromebook?
I'm not sure exynos5250-cros-common is still useful for exynos5250-spring...
- Kukjin
> v2: New (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250-cros-common.dtsi | 151 -------------------------
> arch/arm/boot/dts/exynos5250-snow.dts | 155 ++++++++++++++++++++++++++
> 2 files changed, 155 insertions(+), 151 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-
> common.dtsi
> index 89ac90f..61128d1 100644
> --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
> @@ -27,163 +27,12 @@
> i2c2_bus: i2c2-bus {
> samsung,pin-pud = <0>;
> };
> -
> - max77686_irq: max77686-irq {
> - samsung,pins = "gpx3-2";
> - samsung,pin-function = <0>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> };
>
> i2c@12C60000 {
> status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <378000>;
> -
> - max77686@09 {
> - compatible = "maxim,max77686";
> - interrupt-parent = <&gpx3>;
> - interrupts = <2 0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&max77686_irq>;
> - wakeup-source;
> - reg = <0x09>;
> - #clock-cells = <1>;
> -
> - voltage-regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "P1.0V_LDO_OUT1";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo2_reg: LDO2 {
> - regulator-name = "P1.8V_LDO_OUT2";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo3_reg: LDO3 {
> - regulator-name = "P1.8V_LDO_OUT3";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo7_reg: LDO7 {
> - regulator-name = "P1.1V_LDO_OUT7";
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-always-on;
> - };
> -
> - ldo8_reg: LDO8 {
> - regulator-name = "P1.0V_LDO_OUT8";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo10_reg: LDO10 {
> - regulator-name = "P1.8V_LDO_OUT10";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo12_reg: LDO12 {
> - regulator-name = "P3.0V_LDO_OUT12";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-always-on;
> - };
> -
> - ldo14_reg: LDO14 {
> - regulator-name = "P1.8V_LDO_OUT14";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo15_reg: LDO15 {
> - regulator-name = "P1.0V_LDO_OUT15";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo16_reg: LDO16 {
> - regulator-name = "P1.8V_LDO_OUT16";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "vdd_mif";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck2_reg: BUCK2 {
> - regulator-name = "vdd_arm";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck3_reg: BUCK3 {
> - regulator-name = "vdd_int";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck4_reg: BUCK4 {
> - regulator-name = "vdd_g3d";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck5_reg: BUCK5 {
> - regulator-name = "P1.8V_BUCK_OUT5";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck6_reg: BUCK6 {
> - regulator-name = "P1.35V_BUCK_OUT6";
> - regulator-min-microvolt = <1350000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - };
> -
> - buck7_reg: BUCK7 {
> - regulator-name = "P2.0V_BUCK_OUT7";
> - regulator-min-microvolt = <2000000>;
> - regulator-max-microvolt = <2000000>;
> - regulator-always-on;
> - };
> -
> - buck8_reg: BUCK8 {
> - regulator-name = "P2.85V_BUCK_OUT8";
> - regulator-min-microvolt = <2850000>;
> - regulator-max-microvolt = <2850000>;
> - regulator-always-on;
> - };
> - };
> - };
> };
>
> i2c@12C70000 {
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> index c682c88..0f867a3 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -344,4 +344,159 @@
> };
> };
>
> +&i2c_0 {
> + max77686@09 {
> + compatible = "maxim,max77686";
> + interrupt-parent = <&gpx3>;
> + interrupts = <2 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&max77686_irq>;
> + wakeup-source;
> + reg = <0x09>;
> + #clock-cells = <1>;
> +
> + voltage-regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "P1.0V_LDO_OUT1";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "P1.8V_LDO_OUT2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "P1.8V_LDO_OUT3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.1V_LDO_OUT7";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "P1.35V_BUCK_OUT6";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "P2.0V_BUCK_OUT7";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "P2.85V_BUCK_OUT8";
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&pinctrl_0 {
> + max77686_irq: max77686-irq {
> + samsung,pins = "gpx3-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> #include "cros-ec-keyboard.dtsi"
> --
> 1.9.3
WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] ARM: dts: exynos5250: max77686 is Snow only
Date: Fri, 25 Jul 2014 14:28:02 +0900 [thread overview]
Message-ID: <08fe01cfa7c9$341cc700$9c565500$@samsung.com> (raw)
In-Reply-To: <1405704009-8430-2-git-send-email-afaerber@suse.de>
Andreas F?rber wrote:
>
> Move it from exynos5250-cros-common.dtsi to exynos5250-snow.dts.
> Spring does not need it, it uses an s5m8767 instead.
>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
Hi Andreas,
I think this should be reviewed by chrome guys.
Doug, can you have a look this series for exynos5250-chromebook?
I'm not sure exynos5250-cros-common is still useful for exynos5250-spring...
- Kukjin
> v2: New (Doug Anderson)
>
> arch/arm/boot/dts/exynos5250-cros-common.dtsi | 151 -------------------------
> arch/arm/boot/dts/exynos5250-snow.dts | 155 ++++++++++++++++++++++++++
> 2 files changed, 155 insertions(+), 151 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-
> common.dtsi
> index 89ac90f..61128d1 100644
> --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
> @@ -27,163 +27,12 @@
> i2c2_bus: i2c2-bus {
> samsung,pin-pud = <0>;
> };
> -
> - max77686_irq: max77686-irq {
> - samsung,pins = "gpx3-2";
> - samsung,pin-function = <0>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> - };
> };
>
> i2c at 12C60000 {
> status = "okay";
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <378000>;
> -
> - max77686 at 09 {
> - compatible = "maxim,max77686";
> - interrupt-parent = <&gpx3>;
> - interrupts = <2 0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&max77686_irq>;
> - wakeup-source;
> - reg = <0x09>;
> - #clock-cells = <1>;
> -
> - voltage-regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "P1.0V_LDO_OUT1";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo2_reg: LDO2 {
> - regulator-name = "P1.8V_LDO_OUT2";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo3_reg: LDO3 {
> - regulator-name = "P1.8V_LDO_OUT3";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo7_reg: LDO7 {
> - regulator-name = "P1.1V_LDO_OUT7";
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-always-on;
> - };
> -
> - ldo8_reg: LDO8 {
> - regulator-name = "P1.0V_LDO_OUT8";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo10_reg: LDO10 {
> - regulator-name = "P1.8V_LDO_OUT10";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo12_reg: LDO12 {
> - regulator-name = "P3.0V_LDO_OUT12";
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-always-on;
> - };
> -
> - ldo14_reg: LDO14 {
> - regulator-name = "P1.8V_LDO_OUT14";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - ldo15_reg: LDO15 {
> - regulator-name = "P1.0V_LDO_OUT15";
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> - regulator-always-on;
> - };
> -
> - ldo16_reg: LDO16 {
> - regulator-name = "P1.8V_LDO_OUT16";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "vdd_mif";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck2_reg: BUCK2 {
> - regulator-name = "vdd_arm";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck3_reg: BUCK3 {
> - regulator-name = "vdd_int";
> - regulator-min-microvolt = <900000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck4_reg: BUCK4 {
> - regulator-name = "vdd_g3d";
> - regulator-min-microvolt = <850000>;
> - regulator-max-microvolt = <1300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck5_reg: BUCK5 {
> - regulator-name = "P1.8V_BUCK_OUT5";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - buck6_reg: BUCK6 {
> - regulator-name = "P1.35V_BUCK_OUT6";
> - regulator-min-microvolt = <1350000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - };
> -
> - buck7_reg: BUCK7 {
> - regulator-name = "P2.0V_BUCK_OUT7";
> - regulator-min-microvolt = <2000000>;
> - regulator-max-microvolt = <2000000>;
> - regulator-always-on;
> - };
> -
> - buck8_reg: BUCK8 {
> - regulator-name = "P2.85V_BUCK_OUT8";
> - regulator-min-microvolt = <2850000>;
> - regulator-max-microvolt = <2850000>;
> - regulator-always-on;
> - };
> - };
> - };
> };
>
> i2c at 12C70000 {
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> index c682c88..0f867a3 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -344,4 +344,159 @@
> };
> };
>
> +&i2c_0 {
> + max77686 at 09 {
> + compatible = "maxim,max77686";
> + interrupt-parent = <&gpx3>;
> + interrupts = <2 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&max77686_irq>;
> + wakeup-source;
> + reg = <0x09>;
> + #clock-cells = <1>;
> +
> + voltage-regulators {
> + ldo1_reg: LDO1 {
> + regulator-name = "P1.0V_LDO_OUT1";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: LDO2 {
> + regulator-name = "P1.8V_LDO_OUT2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo3_reg: LDO3 {
> + regulator-name = "P1.8V_LDO_OUT3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo7_reg: LDO7 {
> + regulator-name = "P1.1V_LDO_OUT7";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + };
> +
> + ldo8_reg: LDO8 {
> + regulator-name = "P1.0V_LDO_OUT8";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo10_reg: LDO10 {
> + regulator-name = "P1.8V_LDO_OUT10";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo12_reg: LDO12 {
> + regulator-name = "P3.0V_LDO_OUT12";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo14_reg: LDO14 {
> + regulator-name = "P1.8V_LDO_OUT14";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + ldo15_reg: LDO15 {
> + regulator-name = "P1.0V_LDO_OUT15";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + };
> +
> + ldo16_reg: LDO16 {
> + regulator-name = "P1.8V_LDO_OUT16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck5_reg: BUCK5 {
> + regulator-name = "P1.8V_BUCK_OUT5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + buck6_reg: BUCK6 {
> + regulator-name = "P1.35V_BUCK_OUT6";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + buck7_reg: BUCK7 {
> + regulator-name = "P2.0V_BUCK_OUT7";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + buck8_reg: BUCK8 {
> + regulator-name = "P2.85V_BUCK_OUT8";
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&pinctrl_0 {
> + max77686_irq: max77686-irq {
> + samsung,pins = "gpx3-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +};
> +
> #include "cros-ec-keyboard.dtsi"
> --
> 1.9.3
next prev parent reply other threads:[~2014-07-25 5:28 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 17:20 [PATCH v2 0/4] ARM: dts: exynos: Prepare Spring Andreas Färber
2014-07-18 17:20 ` [PATCH v2 1/4] ARM: dts: exynos5250: max77686 is Snow only Andreas Färber
2014-07-18 17:20 ` Andreas Färber
2014-07-18 17:20 ` Andreas Färber
2014-07-25 5:28 ` Kukjin Kim [this message]
2014-07-25 5:28 ` Kukjin Kim
2014-07-25 15:08 ` Doug Anderson
2014-07-25 15:08 ` Doug Anderson
2014-07-25 15:13 ` Doug Anderson
2014-07-25 15:13 ` Doug Anderson
2014-07-25 15:30 ` Andreas Färber
2014-07-25 15:30 ` Andreas Färber
2014-07-25 15:30 ` Andreas Färber
2014-07-25 16:02 ` Doug Anderson
2014-07-25 16:02 ` Doug Anderson
2014-07-29 16:15 ` Doug Anderson
2014-07-29 16:15 ` Doug Anderson
2014-07-18 17:20 ` [PATCH v2 2/4] ARM: dts: exynos5250: cypress,cyapa trackpad " Andreas Färber
2014-07-18 17:20 ` Andreas Färber
2014-07-18 17:20 ` [PATCH v2 2/4] ARM: dts: exynos5250: cypress, cyapa " Andreas Färber
2014-07-29 16:16 ` [PATCH v2 2/4] ARM: dts: exynos5250: cypress,cyapa " Doug Anderson
2014-07-29 16:16 ` Doug Anderson
2014-07-29 23:06 ` Kukjin Kim
2014-07-29 23:06 ` Kukjin Kim
2014-07-30 0:21 ` Andreas Färber
2014-07-30 0:21 ` Andreas Färber
2014-07-18 17:20 ` [PATCH v2 3/4] ARM: dts: exynos5250: Fold common ChromeOS parts into Snow Andreas Färber
2014-07-18 17:20 ` Andreas Färber
2014-07-18 17:20 ` Andreas Färber
2014-07-25 16:02 ` Doug Anderson
2014-07-25 16:02 ` Doug Anderson
2014-07-29 12:45 ` Andreas Färber
2014-07-29 12:45 ` Andreas Färber
2014-07-29 15:11 ` Doug Anderson
2014-07-29 15:11 ` Doug Anderson
2014-07-25 16:35 ` Javier Martinez Canillas
2014-07-25 16:35 ` Javier Martinez Canillas
2014-07-25 16:43 ` Doug Anderson
2014-07-25 16:43 ` Doug Anderson
2014-07-25 17:02 ` Javier Martinez Canillas
2014-07-25 17:02 ` Javier Martinez Canillas
2014-07-29 13:00 ` Andreas Färber
2014-07-29 13:00 ` Andreas Färber
2014-07-29 14:39 ` Javier Martinez Canillas
2014-07-29 14:39 ` Javier Martinez Canillas
2014-07-29 15:27 ` Doug Anderson
2014-07-29 15:27 ` Doug Anderson
2014-07-18 17:20 ` [PATCH v2 4/4] ARM: dts: exynos5250: Add Spring device tree Andreas Färber
2014-07-18 17:20 ` Andreas Färber
2014-07-18 17:20 ` Andreas Färber
2014-07-25 16:02 ` Doug Anderson
2014-07-25 16:02 ` Doug Anderson
[not found] ` <CAD=FV=Xu9b6433pV=bqi3jZZR03G6nyi2iNgbSXwAcRY4Y=4yA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-30 13:06 ` Andreas Färber
2014-07-30 13:06 ` Andreas Färber
2014-07-30 13:06 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='08fe01cfa7c9$341cc700$9c565500$@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=afaerber@suse.de \
--cc=ben-linux@fluff.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=stephan@synkhronix.com \
--cc=vpalatin@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.